The WLAN with anchor WLC - problems of roaming

Similar Questions

• My ZTE open C unable to connect to the wlan with 63-signs-hex key.

  Hello

  my C open from ZTE unable to connect to the wlan with WPA2-PSK and a 63 sign hex key. When I create a 2. ESSID with WPA2-PSK a sentence normal, everything's fine.

  Oliver

  Hi OliverwithZTE,

  I understand that you have connection problems to your network WPA2-PSK.

  Unfortunately, WPA2-PSK is currently not supported on Firefox OS version 1.3. Only WPA-TKIP and WPA2-AES are supported.

  -Ralph

• Satellite L500-13W: how to enable the Wlan with Win 7 - shortcut keys do not work

  Hello

  I recently acquired this laptop and I installed win7 64-bit teacher. The first problem was that the wireless card has not been installed, but I go to the Toshiba website and download the new one, next to this i can not activate the map with the fn + f8 key, it's the only way to activate the card.

  I already downloaded some drivers and utilities and I can not activate the card, the shortcut key does not work and there is not another switch, software does not work either

  Any help will be welcome
  Thank you

  Hello

  Hmm. Win 7 drivers are not yet out, but I found some beta readers on the Toshiba page we:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Maybe you will find some Win 7 drivers for series L500/505

  Otherwise I would recommend you to check if you can activate the WLan in Device Manager-> properties-> Advanced tab Wlan card

  There are a few additional options, that maybe the WiFi we / off would be there also.

• Satellite Pro M70: Unable to connect to the WLan with ConfigFree

  Salvation in the Forum.

  I have problems with a satellite Pro M70, about gaining control of wireless connections.

  When I scan with "The Radar" I have ConfigFree for available wireless accesspoints, I get several points available, but it is not able to connect to one of them. I can read their status and see their marker of WEP encryption.

  When I try to connect to one of them, I get a pop-up dialog, that said (translated from Danish) 'suppliers another software is in control of the wireless network card. When you try to configure a connection through the classic way to windows, windows States that "windows is not able to configure this wireless connection - if you have another program to manage wireless connections, you must use it". I guess it refers to ConfigFree...?

  Is the unnamed "other provider" associated Windows or perhaps associated McAfee (Security Suite 2007)?

  If you are familiar with this problem or something like that I'd be please to know.

  Also - where can I enter keys for WEP encryption for my friends in ConfigFree WLAN routers?

  > Trying to make a connection through the classic way to windows, windows States that "windows is not able to configure this wireless connection - if you have another program to manage wireless connections, you must use it". I guess it refers to ConfigFree...?

  It should not be a ConfigFree. According to you, an Intel ProSet utility or a Client Atheros wireless network adapter might be controls the Wlan configuration!

  Please check if one of the two control the WiFi network tools and turn off!

  > where can I enter keys for WEP encryption for my friends in ConfigFree WLAN routers

  You should have three different tabs in the utility Configfree.
  The second device settings provides the list of devices, and you should see the wireless network connection.
  Choose and use the button network connections.
  There you should find some encryption settings!

  Also check the profile settings tab and the option called security settings

• Requirements of the mobility for the comments of anchor WLC group

  Hello-

  I always assumed that you cannot create a tunnel between a local WLC and an anchor WLC comments that are in different groups of mobility.   However, I was told recently (no more details) that it is possible.  So I put to test this.

  I'm trying one of my local WLCs SSID comments point to an anchor of WLC comments in a different group of mobility.   I have a forthcoming maintenance window and I'm looking to anchor clients on a campus at anchor WLC on the campus on the other for the customer service does not lower.   Each campus is that it's mobility group.   Trying to set up I went to the "mobility anchors" screen for the SSID guest on one of the local WLCs and I cannot add anchor WLC on campus on the other because it is not in the drop-down list.  This is because it is not in the same mobility group.   So my question is how do customers of anchor across a local WLC in a group of mobility to a WLC anchor in another group of mobility?

  To me it seems not possible without major configuration changes.   I don't want to reconfigure / rebuild mobility groups.

  Thank you

  Chuck

  Not only is it possible, that I recommend. However, you can be confusing to some concepts.

  The mobility group is different from that of the field of mobility.  Generally, I am referring to group mobility as these WLCs with the name of the default mobility group and the field of mobility than the entire list of mobility (where you can set up to 72 controllers belonging to various groups of mobility).

  The point is that GroupA and WLCs of to WLCs 1-10 11-20 are GroupB, anchor to work, you at least need to add anchor to the mobility list wlc abroad and vice versa.

  If you notice, when you add an entry of mobility to the list, it should ask you for mobility group. If you leave this field empty, it must default to that of the WLC, but on controllers GroupA, you could define GroupB controllers (and specific group b) and then you should now have the mobility between your controllers and configuration of the anchor will be your anchor in the menu...

  Who is?

• Changing table via the package with immediate execution (problem)

  Hello

  I have a unusual problem. I have a package that contains the procedure that via execute immediate statement, creates a table on which he performs different actions for example:

  -alter table some_owner.dummy_table noparallel

  -create index some_owner.idx_name on some_owner.dummy_table (column)...

  But I only managed to run move and create synonym table/public via execute immediate statement. Actions as alter table and create index fails with error ORA-01031: insufficient privileges.

  Note If call these commands outside the package (a simple script) this all done OK.

  I found a way, where I set the AUTHID CURRENT_USER command create package statement. In this way all the actions executed OK.

  I wonder why I can't change the table via the package with immediate execution on a table that is in the tablespace "SOME_TABLESPACE" and the title of owner "SOME_OWNER", without putting the AUTHID command on the package.

  There must be a problem why a package cannot change the table which is owned by the user 'SOME_OWNER '.

  All useful responses would be appreciated.

  I have a unusual problem.

  No - you don't have. This question has been answered SEVERAL times on this forum and others.

  But I only managed to run move and create synonym table/public via execute immediate statement. Actions as alter table and create index fails with error ORA-01031: insufficient privileges.

  OK - your username doesn't have privileges to do these operations or only received privileges through roles.

  Roles are DISABLED in named PL/SQL blocks that use of the AUTHOR's rights.

  Note If call these commands outside the package (a simple script) this all done OK.

  I found a way, where I set the AUTHID CURRENT_USER command create package statement. In this way all the actions executed OK.

  Of course - the roles are NOT disabled in named PL/SQL blocks that use the rights of the APPELLANT or in anonymous blocks.

  I wonder why I can't change the table via the package with immediate execution on a table that is in the tablespace "SOME_TABLESPACE" and the title of owner "SOME_OWNER", without putting the AUTHID command on the package.

  Well now you know!

• ISE 1.2 - begging CWA provisioning with anchor WLC

  Hi all

  Having a problem with supply begging via CWA on a controller of the anchor. I am able to connect through CWA and authenticate etc no problem, but when the device registration page it says "cannot connect to the network at this moment" - the mac address is filled but the said button try again. Once I click on retry it cycles back to the original comments Portal login page. In the section reports the begging failed provisioning message is "error trying to determine access privileges: failed to get the host name of the session cache."

  I tried the same policy without the anchor (ie the local controller) and it works perfectly. Interestingly enough if I manually register the device then connect first the portal comments, that it allows me to click on register and proceed to the provision of begging. I also tried installing anchor using peap and NSP redirection - this also works perfectly.

  I can confirm beforehand that firewalls, etc. is not a problem with permit IP any one between all parts of work - no blocks without drops etc. Politics is the standard CWA trustsec installation with Enable ticked self-supply. For what it's worth, I am absolutely confident with the config having deployed before - but without a controller of anchor.

  Stephen,

  I have worked with TAC customer account team to find a solution.  The problem is with the WLC anchor and the session not replicated.  I was able to get around by disabling account management radius for the ssid on the controller of the anchor, but when we look at the bug looks like an alternative solution is to disable fast switching ssid, which could cause problems with BYOD worldwide double ssid.  I still do test, but the accounting change seems to have resolved.  Bug ID: CSCui38627

• Unable to connect to secure the WLAN with Satellite L30

  I just bought my laptop L30 and use that in a few hours. I have a frustrating problem that was annoying me:
  I have a model number of the wireless modem/router (+ 2 years) belkin F5D7360 - my wireless network. My router is configured with a SSID and configured to use the 11g and 11B modes.

  Connect to my network without wire in unsafe mode works very well. So it's not a thing g 11 or 11 b...

  As soon as I turn on security: WPA-Personal, PKIP encryption - the machine does not connect. Windows detects the network but when I try to connect - it returns an error saying authentication has expired - check the network settings. Several attempts that windows automatically diagnose and repair the problem does not work.

  I've rechecked, triple checked all the setting. Even changed passwords. Still no joy.

  It isn't the network installation - as when I connect with my Belkin 54g PCMCIA card - it works fine. Of course, I want to use the built-in... wireless and I want my network to be sure.

  To basic family support of Windows Vista Edition that comes with the package.

  I'm quite a techie, but this is my first experience with Vista - and Toshiba laptop.
  Currently, I'm stuck and eager to solve this annoying problem.

  Any ideas?

  [Edited by: admin on 15-Sep-2007 19:30]

  Hello

  Have you noticed the same behavior, use a WEP encryption? I have goggled a bit, but I wasn't able to find any info on this Belkin router.

  Please try to reboot the router and try to connect WLAN again.

• Slow down the WLAN with my Satellite P300

  I bought a Toshiba Satellite P300 with Vista. I dislike Vista so instead, I installed Windows XP Home Edition.
  The problem is that I have a very bad speed of my wireless network 1.15 Mbit/second, with specifications plus another, I have 10/15 Mbps.

  This is a problem and I don't know how to fix it.
  Would this card/wireless network in the computer?
  After installation of xp, the computer does not find, I try a few things now an Atheros card is in the list.

  Help:

  Hello

  What version of BIOS is installed on your laptop satellite?

• Insert the key with word 2007 problem

  My insert key does not work with Word 2007.  This has been verified at Best Buy with various other keyboards to test the problem.  This can be corrected

  Hi Nitu,.

  There is an option in Word 2007 that controls that:

  Click on the Office button > Word options > Advanced > editing options > use the Insert to overtype mode control key.

  I hope this helps.

  Dave Dave D D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• List of the HorizontalFieldManager with scrolling focus problem

  Hello

  I'm doing a vertical list of horizontalfieldmanager with an icon and two text fields, but I'm having a problem when scrolling it. I used a nullField to manage focus. When I scroll to the top everything works well, but when I Ahmed to the bottom of the item appears on the edge of the screen.

  I guess that I did not understand how to manage the focusChange metodh and the metodh of the painting.

  All advice will be appreciated.

  Thank you, Andrea.

  //
      // Main screen for the application
      //
      private class MyMainScreen extends MainScreen
      {
          public MyMainScreen()
          {
              super(Manager.USE_ALL_WIDTH);
  
              for (int i = 0; i<20; i++) this.getMainManager().add(new PanelRow("off", "first text line", "second text line"));
          }
  
          private class PanelRow extends HorizontalFieldManager implements FocusChangeListener
          {
              private NullField nullField;
              private BitmapField icon;
              private ColorLabelField label1;
              private ColorLabelField label2;
  
              public PanelRow(String iconString, String label1String, String label2String)
              {
                  super(Manager.USE_ALL_WIDTH);
  
                  // Add null field
                  nullField = new NullField(NullField.FOCUSABLE);
                  nullField.setFocusListener(this);
                  super.add(nullField);
  
                  // Add bitmap
                  Bitmap offIcon = Bitmap.getBitmapResource("offButton.png");
                  icon = new BitmapField(offIcon, BitmapField.NON_FOCUSABLE | BitmapField.FIELD_LEFT);
                  super.add(icon);
  
                  // Add first and second text lines
                  VerticalFieldManager labelsVerticalManager = new VerticalFieldManager();
                  label1 = new ColorLabelField(label1String, LabelField.NON_FOCUSABLE | LabelField.FIELD_LEFT);
                  label2 = new ColorLabelField(label2String, LabelField.NON_FOCUSABLE | LabelField.FIELD_LEFT);
                  labelsVerticalManager.add(label1);
                  labelsVerticalManager.add(label2);
                  super.add(labelsVerticalManager);
              }
  
              public void focusChanged(Field field, int eventType)
              {
                  invalidate();
              }
  
              protected boolean navigationClick(int status, int time)
              {
                  fieldChangeNotify(FieldChangeListener.PROGRAMMATIC);
  
                  return true;
              }
  
              protected void paint(Graphics g)
              {
                  int oldBackground = g.getBackgroundColor();
  
                  if (nullField.isFocus())
                  {
                      g.setBackgroundColor(Color.CADETBLUE);
  
                      label1.setFontColor(Color.WHITE);
                      label2.setFontColor(Color.WHITE);
                  }
                  else
                  {
                      g.setBackgroundColor(Color.WHITE);
  
                      label1.setFontColor(Color.SLATEGRAY);
                      label2.setFontColor(Color.BLACK);
                  }
  
                  g.clear();
  
                  g.setBackgroundColor(oldBackground);
  
                  super.paint(g);
              }
          }
  
          //
          // Define a new colored labelfield class
          //
          public class ColorLabelField extends LabelField
          {
              public ColorLabelField(Object text, long style)
              {
                  super(text, style);
              }
  
              private int mFontColor = -1;
  
              public void setFontColor(int fontColor)
              {
                  mFontColor = fontColor;
              }
  
              protected void paint(Graphics graphics)
              {
                  if (-1 != mFontColor) graphics.setColor(mFontColor);
  
                  super.paint(graphics);
              }
          }
      }
  

  Then try to create your NullField with getFocusRect override: like this:

  nullField = new NullField(NullField.FOCUSABLE) {
    public void getFocusRect(XYRect rect) {
      getManager.getExtent(rect);
      rect.setLocation(0, 0);
    }
  };
  

  Paint won't help you - you must tell the system to the entire span developed in order to scroll properly. If the above fails, analyze your focusChanged eventType and make sure that your Manager is fully visible on the screen on FOCUS_GAINED. To do this, you need to use getManager () .getVerticalScroll () / getManager () .setVerticalScroll () as well as of your Manager and getHeight() getTop().

• Illustrator import, preserve the layer with diapers size problems more

  When I import a layered .ai file to help retain size layer that everything comes through, more small layers are fine but all the layers that are superior to the Illustrator artboard are cropped to that size. Models of layer are visible as the size they should be (size, position, anchor etc.), but they look like they would if they had masks on them to the size of the doc AE (I checked, they don't).

  Screenshot attached if all goes well shows what I mean.

  Using the most recent version of CC 2014 at all.

  

  This is how AE. If you ar import or PSD as Composition AE - then AE chose HAVE artboard size size of the publication. If you want to see 100% of all the layers you have imported AE, you can:
  -at AE expand this workplan

  -You can change the size of your publication you have imported EI by choosing settings of Composition/Composition

  -You can create a new composition with the appropriate size of WH and just comy and paste layers imported to this new composition

• Changing the settings of the WLAN with an Atheros AR5007EG Wireless Network Adapter running on a Vista computer

  How can I set the preset wlan on ONE for an Atheros AR5007EG Wireless Network Adapter running on a Vista computer.  Currently, the default is OFF and I need to use the Fn F1 to bring up the option to turn it on, Iwant my laptop to connect to my wireless router automatically without having to do that.

  Thank you

  Hi Cath.

  In most cases, it is a configuration in the BIOS of the laptop that will solve the wireless by card.

  Then start the laptop enter in BIOS and look for an entry that configure the wireless to be all the time card.

  Where necessary the manual or computer support site must have the necessary info.

• T400 - VGA on the resolution with discreet card problem

  Hello

  I wanted to connect my T400 to external LCD screen, but I can not put better resolution of 1600 x 1200 on discrete video card with VGA output. Card works Intel perfectly well, I can put it up to 2048xsomething, which is more than enough. But how my Mobility Radeon 3400 to make better resolution?

  I tried many drivers, catalyst but seems that only switchable driver from the homepage of Lenovo works. Some of the drivers cause leakage menu "Switchable Graphics" in the battery meter, some could not even install.

  Please help me, I really connect external LCD with 1920 x 1080 but can not it - related photo

  http://i51.Tinypic.com/xor0ud.jpg

  Moderator edit: Image > 50 k converted to connect by the Community rules.

  
  

• Newcomer in the cloud with a RTL problem

  Hoy!

  I recently joined the cloud and I love it, surely if all the failures will resolve we will he apply fully in our society.

  Among my clients, I have a little that the native language is oriented RTL (Arabic and Hebrew), can I have access to products with the support of RTL?

  and in fact why it is not supported in the programs themselves (this is a deal breaker for me)

  Help, please.

  C.

  Support RTL (Arabic and Hebrew) is now in CS6 products. At the bottom of the Apps & Services page for the creative cloud (https://creative.adobe.com/apps) is a link http://www.adobe.com/products/creativecloud/tech-specs.htmltechnical specification. If you then click on the link of an individual product like InDesign (http://www.adobe.com/products/indesign/tech-specs.html), you'll see this a TEC Spec.

  To access these languages download the Adobe Application Manager from the Apps & Services page. At the top left, you'll see your name. Click your name, and in the context menu choose Preferences. Choose the desired installation language. See screenshot: