T400 - VGA on the resolution with discreet card problem

Similar Questions

• That we will be able to move applications to the SD with JB card?

  Hello

  I have an old nokia phone for 3 years that I hate him, I made a horrible mistake and bought because the ads were cool air and its features too, but the phone is full of problems, so this time I want to update, I looked for people having problems with the phone before you buy.

  So I don't care if it's not HD resolution is displayed or if some applications are not compatible due to the Intel chip.

  But I can't really buy a Razr I if I won't be able to install/move the apps on the SD card, I can't have only 5 GB for applications. Especially now that some apps/games can take around 600 MB - 1 GB of space. I know that some applications must be on the internal memory, but no more.

  So my question is, this will look with the update of Jelly Bean? If Yes, I think that this is the phone for me, otherwise I think I'll continue to search for another.

  PS: I don't foresee rooting, unlock, etc., etc. to solve this problem, I want to keep the warranty, so this issue should be fixed officially.

  I hope that motorola move apps on the SD card as possible, it will help all users.

  Hi AgustinB,

  Thank you for suggesting it. Let's move it and we hope to change that in a future update service.

  See you soon,.

  Nicole

• is it possible to replace the wifi with another card?

  Hello

  I have a t400 with intel 5100 wifi card and now I want to install mac os on my laptop.

  problem is that mac os is not detecting the 5100 series of wifi card and I would like to know if it is possible to replace the current model 5100 with an old series?

  Is there any Center of service authorized in Uppsala in Sweden / Sweden for this?

  Thank you

  Limited wireless cards Lenovo Lenovo units certified to work with the brand machine. This is done through a white list in the system BIOS. Recently, I disassembled the last BIOS of T500/W500 (version 3.14 - 1: 06) and discovered the following picture of the white list. It's raw hex big endian joined with what I found by searching for the device ID's are redundant entries to change supplier codes.

  86803 B 428680111000 Intel Corporation PRO/Wireless 5350 AGN [Echo Peak] network connection

  86803D 428680111200 Corporation Intel WiMAX/WiFi Link 5150

  868036428680111000 Intel Corporation ultimate N WiFi Link 5300

  868037428680111200 Intel Corporation PRO/Wireless 5100 AGN [Shiloh] WIRELESS card

  868037428680161200 Intel Corporation PRO/Wireless 5100 AGN [Shiloh] WIRELESS card

  8C161C008C16350000 Atheros AR5007EG

  EC107281EC1020E000 Realtek RTL8191SEvB (yuck, Realtek!) I wouldn't want one of these...)

  86803 8086:423D 428680161200 Corporation Intel WiMAX/WiFi Link 5150 D

  8680840086801513 corporation Intel Centrino Wireless-N 1000

  Your T400 comes from the same range and has probably the same list. Don't forget, you can buy a Lenovo brand unit.

  Also look for a PM with additional information.

• Setting the resolution with HDMI

  I'm trying to connect my laptop Sony Vaio (VPCEE2M1E with AMD/ATI Radeon) to my couple of years Toshiba TV.  The Toshiba is the brand "HD READY", but when I hook them together the default resolution is 720 not 1080.

  I went to control PANEL / DISPLAY / SETTINGS HDMI to try to reset manually but 768 and 1080 selection buttons are both in gray.  Also, I can not select the 'Adjust Resolution (Disable)' tab to see what's there.

  The HDMI cable is a cable of high quality IXOS, so that should not present any problems.

  Any thoughts?  Very much appreciated.

  I'm trying to connect my laptop Sony Vaio (VPCEE2M1E with AMD/ATI Radeon) to my couple of years Toshiba TV.  The Toshiba is the brand "HD READY", but when I hook them together the default resolution is 720 not 1080.

  What is the model of your Toshiba TV? 720 p is one of the HD, just not one of the highest resolutions and lots of 720 p always sell TVs HD. Many of those who are capable of 1080i (interelaced) resolution, you must check the specifications of TV to find out. 1080i is not as high resolution 1080 p, but he could make videos to look a little better than 720 p.

  The other consideration is that you may need to add the resolutions undetected in your resolution settings using Catalyst Control Center Radeon card. If you only use the video card drivers MS (ie. not provided on the video card driver disk or downloaded from ATI) then the additional resolution settings may not be available.

• Tecra S11 - change the resolution with FN keys gives an error

  Hello

  When I change the resolution of the screen with FN + space key combo, then background turns white and the icons on the desktop disappear. Windows 7 Professional / Tecra S11

  When you try, after FN + space press WIN + D (see the "D" esktop) combo and white background will appear.

  It's a Toshiba sw related issue or Win7

  Thank you

  Hi petersm,

  You may notice the behavior even if you change the screen resolution by using the options of the display driver?

  Maybe you need to reinstall Toshiba added value Pacakge that controls the FN keys

• The Portege S100 graphics card problem?

  I have a Portege S100-S113TD, and I was watching a youtube fullscreen video, when the screen went suddenly full of horizontal lines and the laptop became unresponsive - I had to physically hold the power button for about 10 seconds turn off.

  Now it turns on but I only have a blank screen - it is the graphics card?

  If so, can anyone suggest where I can buy a replacement graphics card?

  The current one is a nVidia GeForce Go 6200TE 64M / 128 M 6600TE - I tried looking for one, but perhaps they are now obsolete.

  Any help would be greatly appreciated.

  Hello

  > Now it turns on but I only have a blank screen - it is the graphics card?
  It seems that Yes

  But you are able to test the laptop with an additional external monitor?
  If possible, connect the external monitor and press Fn + F5 to check if something would be visible on 2nd screen.
  If photos on 2nd screen would be visible, then the GPU is OK and only your internal display is faulty.

• Tecra A10 - change of resolution with Docking Station problem

  Hello

  I own a Tecra A10 - 14Q and I like it a lot - it is a very beautiful piece of hardware, including the functionality of UMTS.

  When the Tecra is moored to the dock Express, and the external monitor (Samsung SyncMaster 22 "with resolution 1600 * 1200) is on defining the Office to be cloned on both screens, passes resolution of 1280 * 800 on the Tecra to 800 * 600 as"best resolution.

  I tried Intel and Mobility Center graphics settings, but I can't find a way to set I want to keep the resolution 1280 * 800.

  Suspicion to do so automatically is welcome. I found that a program that now lies on my desk that I run so it redefines the resolution to 1280 * 800, but I would like to stress that resolution remains just that it is.

  Kind regards

  YaGru

  Hello

  It's not easy to say why the resolution automatically decreases

  But sometimes, if the external monitor would be connected to the Tecra A10 directly without using the Express Docking Station?

  Otherwise the problem could be linked to the dock Express (Replicator of port express?)

  Maybe the 1600 * 1200 resolution on external monitor is too high for the express port replicator and so there are some questions which s my personal suggestion

• Changing table via the package with immediate execution (problem)

  Hello

  I have a unusual problem. I have a package that contains the procedure that via execute immediate statement, creates a table on which he performs different actions for example:

  -alter table some_owner.dummy_table noparallel

  -create index some_owner.idx_name on some_owner.dummy_table (column)...

  But I only managed to run move and create synonym table/public via execute immediate statement. Actions as alter table and create index fails with error ORA-01031: insufficient privileges.

  Note If call these commands outside the package (a simple script) this all done OK.

  I found a way, where I set the AUTHID CURRENT_USER command create package statement. In this way all the actions executed OK.

  I wonder why I can't change the table via the package with immediate execution on a table that is in the tablespace "SOME_TABLESPACE" and the title of owner "SOME_OWNER", without putting the AUTHID command on the package.

  There must be a problem why a package cannot change the table which is owned by the user 'SOME_OWNER '.

  All useful responses would be appreciated.

  I have a unusual problem.

  No - you don't have. This question has been answered SEVERAL times on this forum and others.

  But I only managed to run move and create synonym table/public via execute immediate statement. Actions as alter table and create index fails with error ORA-01031: insufficient privileges.

  OK - your username doesn't have privileges to do these operations or only received privileges through roles.

  Roles are DISABLED in named PL/SQL blocks that use of the AUTHOR's rights.

  Note If call these commands outside the package (a simple script) this all done OK.

  I found a way, where I set the AUTHID CURRENT_USER command create package statement. In this way all the actions executed OK.

  Of course - the roles are NOT disabled in named PL/SQL blocks that use the rights of the APPELLANT or in anonymous blocks.

  I wonder why I can't change the table via the package with immediate execution on a table that is in the tablespace "SOME_TABLESPACE" and the title of owner "SOME_OWNER", without putting the AUTHID command on the package.

  Well now you know!

• Stream of 6537 s on the drive with another card as well.

  Hello, we are planning to have a platform that has 3 PXI 6537 s and another card for playback of a sync signal (North Atlantic Instruments 75 3). We capture cards PXI 10 MHz and the 3 75 between 10 and 20 Hz, regardless if we taste a bit faster than that, but we can't go much more slowly. We need to store the result in a known file format so we can analyze it later.

  From the example of reference for data streaming of double PCIe 6537 s example of disc (http://zone.ni.com/devzone/cda/epd/p/id/5315), it seems simple enough to add another PXI card.  We are OK with that.

  What is the best approach to take the card sync?

  Our first choice is so far:

  To read a value from the sync every time it happens around the loop of the producer; i.e. every 20ms. This will taste at 50 Hz, but that's OK. Store us the values in a table of fixed value size zero and push the table on the queue at the end of the case 'true '.  It's easy enough but... The 3 1 d Raw U32 DAQmx readings work quite quickly to allow the Syncro values to the queue, in the 20ms window? (We have operated there should be about 16 MB of data per card for each reading). If not, is it close enough that he could be twisted so that sync data can be queued as well?

  Our second is:

  We plan to read data in sync in a zero arbitrarily large array initilized, especially if we know the size when write us data to the file. This can be filled at 20 Hz, in what I'll call (or the love of argument) a producer of the second loop. We could protect access using semaphores. In the loop of consumption, we read the three blocks of data, then data sync; That is to say:

  • read three lots of the queue database
  • lock the semaphore
  • write the content of the table
  • zero the content of the table
  • unlock the semaphore

  Does anyone know of a decent/better way to do this?

  Are we on track?

  Thank you

  Jon.

  Hi Jon,

  Yes, I think that your hypothesis is correct.

• Pavilion p6-2117 not cross the start with a card installed parallel screen.

  Pavilion p6 - 2117c will not get past the home screen with a PCI express card parallel installed.  I take the card and the machine works fine.  The display shows press "ESC" to the start menu, but nothing happens.

  Thanks for the help.  I was able to solve it.  I disabled all the PCI expansion slots are not active and also disabled the PCI SERR # generation (other forums said that it would not affect performance).  The machine starts now.  I also changed the boot order so that the ATAPI CD was first then the legacy hard drive.   Don't know why the combination worked, but at least I can get in the machine.  Now, let's see if it prints.  Thanks again.

• Cannot share the internet connection on the network with sprint card

  Hi all

  I'm stumped on this one. I'm working on my network of fathers, and he lives in a rural area. Unfourantely, there are not a lot of internet service here. It uses a printed card that connect locally to a windos vista home pc. From there on, the connection is shared and that the pc is connected to a linksys router. The router, then hosts a wireless network and hard line connections. About three weeks ago, the Internet stopped working except the computer, map of sprint is hung directly. I tried the following options below to solve the problem.

  1. I can plug the card sprint to any computer and it works.

  2. I replaced the network adapter on the host computer

  3. I have tried the card sprint on other computers and tried to share from there. Same result

  4. replace the router

  5 opportunity anotehr card Sprint which has been known to work

  6. replace the network cable between pc and router

  7. I tried removing the router from the equation and ran a network of host pc card form for directly to another computer

  8. the host and also renovated of other computers reformated

  9. do you have an ipconfig/release and renew

  10 tried sharing all NICs on the host PC

  When sharing the connection, I can see all the computers on the network. They arise, there is simply not an internet connection.

  The only mistake that I seem to get is not able to find the DNS. I put everything on dhcp.

  Any ideas that anyone can come would be most appreciated. Thank you

  Hello

  Step 01:

  I suggest you follow the same steps as expected here to set up the ICS (Internet Connection Sharing) host computer:
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-shared-Internet-connection-using-ICS-Internet-connection-sharing

  Step 02:

  I also suggest you to follow the link and check.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Internet-settings-for-ICS-Internet-connection-sharing

  For more information, please follow the link.

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-ICS-Internet-connection-sharing

• need help to understand the compatibility with video cards

  I recently bought a HP Pavilion a6742p Desktop PC I have no idea what graphics cards, it supports (trying to upgrade). Check the manufacturers page, but I couldn't understand anything either here is the link

  http://h10025.www1.HP.com/ewfrf/wc/product?LC=en&DLC=en&CC=HK&lang=en&product=3875703

  insaneaim wrote:

  THX but which manufacturers video card companies take in charge of hp?

  HERE, none of them.  I recommend the following manufacturers, XFX, BFG, EVGA, Sapphire & PNY, in that order.  These recommendations are based on personal knowledge, as well as several years of hanging around in the forums of enthusiasts.

• Use the trash with sd card

  When I delete an item from my sd card, the only option is to permanently delete.  Is there a way that deleted files can go in the trash?

  jhill150 wrote:
  > * When I delete something from my sd card, the only option is permanently
  > Remove. Is there a way that deleted files can go in the trash? *
  >

  Only if first save you them to your hard drive first, then
  delete from here. The trash covers no "external" or
  removable drives.

  --

  Bruce Chambers

  Help us help you:
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

  http://support.Microsoft.com/default.aspx/KB/555375

  They who can give up liberty for a little temporary
  safety deserve neither liberty nor safety. ~ Benjamin Franklin

  A lot of people could die rather that thinking; in fact, most do. ~ Bertrand Russell

  The philosopher never killed the priests, while the priest was
  has killed a large number of philosophers.
  ~ Denis Diderot

• Image automatically changing the resolution with HDR and Photomerge in CS4

  I am trying to create HDR images and Hi Res Panoramas using Photoshop CS4. It seems that the resulting image is a much weaker than expected resolution (that is, the image has been reduced by 50% and changed at 240 dpi). I can do the thing smame on my laptop without problem, but may not know why it does not work on my desktop.

  Is there a preference that I missed?

  I use DNG images processed in lightroom.

  Create the Photomerge / HDR in Photoshop by using the option to automate.

  Thank you

  You define ACR for image - change your settings in ACR.

• Shutdown of R500 protected with SD card problems

  Hello

  I have an annoying problem with my Portege R500. When I try to stop my laptop after it wake up from suspend mode, it freezes and doesn't complete the closing (it stops in the last screen before stopping.
  The funny thing is that this only happens if I have an SD card in the SD slot.

  Can you help me?

  Thank you

  Paulo Oliveira

  Hi Paulo

  Can you please give us more information about your Portege? Maybe the model numbers and BIOS version.