The 'writing INI Cluster_ogtk.vi' and 'reading INI Cluster_ogtk.vi'.

Similar Questions

• All the fonts/writing are gibberish and I can't not as what is written, so I can't change anything on my vista, how to see the writing again if I can read? Thank you

  All the fonts/writing are gibberish and I can't not as what is written, so I can't change anything on my vista, how to see the writing again if I can read? Thank you

  Try cleartype youre settings, follow this link.

  http://www.Microsoft.com/en-us/typography/default.aspx

  Also, look for downloads 'police' as you need...

  1, select "cleartype online setting" you will probably get a download popup, install the

  Update...

• If I put a restriction of password which only allow customers who purchase print it (no copy or modification of the document) have an impact on the quality of the file when people open and read the file on mobile devices like phones and tablets?

  If I put a restriction of password that only allow users who buy to print it (no copies or the modification of the document allowed)-it will have no effect on the quality of the file when people open and read the file on mobile devices like phones and tablets?

  Some mobile devices won't be able to open it at all, but if it is open, the quality is not affected.  Please note and understand the warning you get when you set security: indeed, it is largely ignored by many apps.

• How to connect dwyer SERIES 629 differential pressure transmitter to the acquisition of data 9219 and read the signal?

  Here is my sensor
  Pressure sensor

  Here's the DAQ data sheet:

  ACQUISITION OF DATA NOR 9219

  Here are my issues:

  First of all I don't know what is LO and HI exactly in the DAQ 9219 material.

  Second, I don't know what pin code I should connect the DAQ sensor signal wire. PIN 4 or 5 pin? The sensor has three pins, and I guess I should connect the other two wires to the power supply.
  Thirdly how to calibrate the sensor. In labview choose voltage in the wizard?

  I'm pretty new in this acquisition of data and I need your help.

  Thank you

  Hi SilasIII,

  Hmm well 3 sons are probably on the ground, the power and the return signal. The datasheet for the sensor says:

  

  First of all, you need to know which model you have (4-20mA, 0 - 5V or 0-10VDC). HI refers to the return signal, LO essentially means the land of the food that feeds the sensor. Then, you must get the 13-30 VDC supply. I don't think this should be too complicated and can be a simple wall DC power. You can learn how to create a custom in DAQmx scale. I hope that this is a starting point.

  Kind regards

  Eric

• At the same time perform write and read

  Hello

  I use
  DAQmx NOR-USB-6259

  I have problem with parallel
  run the analog signal (for example 1000 points of writing
  by 1 second) channel Dev1/ao0 physics and at the same time read
  1000 points per second physics channel Dev1/ai0 1
  How to do this?
  I tried to use DAQmxExportSignal, but it does work well, or simply, I
  don't know how to do
  correctly maybe I should use a different
  the function?

  Best regards

  AndrzejS

  Hi Andrzej,

  Yes, it's possible, but with your device not at the same time, just with a little delay (about 1 US).

  The track is almost the same thing, you need to add 2 more channels of analog inputs to your task and use playback of multiple samples. Just check the VB Clk Acq - Int example.

  I can't help with particular code, because I'm not familiar with VB, but daqmx functions are very similar, if this change is 3 click in LabVIEW, then it must also be very easy in VB. You manage tasks, if your task contains more channels HERE you will receive samples of all channels.

  I hope this helps and let me know if I misunderstood something.

  Gabor

• Why Thunderbird creates duplicates in the trash when the displacement of unread emails and read in the trash of the Inbox?

  Mainly when I delete the unread messages in the Inbox, later when I look in the trash folder, the message will be twice in the trash? Is also happens with messages read, but not as frequently.

  In addition, when you compose an email, after sending, I have the email in drafts several times?

  RE: Multiple projects

  This sounds like you save copies 'Project' in the "Draft" folder on the server and not the folder 'Project' in the local folders.

  I guess when you compose e-mail, a copy of the draft is saved maybe more than once until the folder is synchronized, so to save more than one copy.

  Is it possible that there is a project of rogue email which you can see via webmail, but not through Thunderbird. This test by deleting all emails via Thunderbird project and right click on the project "folder and select"compact".» Then login to webmail, check the project folder to see if it is really empty.

  Another option:
  If you do not need to keep a copy on the server, then I suggest you use the "Project" folder in the local folders. Set up here:

  • Tools > account settings > Copies and folders for the account
  • Under projects
  • Select 'Other' and 'writes the Local folder.
  • Click OK

• Using the calendar function to select and read data from MS access tables?

  Hello

  I woke up in the learning of database in no time. I'm using Labview 9 to create a table based on DDMMYY hhmmss format. I can write data to the table in access. The picture will be 24 hours before a new table will be created. However, I find that this concept is not very gd as time goes by, I'll have a lot of paintings for example after 6 months.

  1.I would like to create a calendar (similar to the system clock) in labview, through which the user can click and select, which will then open and retrieve the data. Inorder to do I think I need to create queries and the relationship in MS Access? can any1 advice? Please give as much detail as possible.

  2.i can access data and display in labview. However, I want to display the data and plot in the chart. For instance, coloum b, c and trace on the graph in a proceeding for the analyst.

  3. how to generate a report to an email in a file to document the daily data inserted. I can do it in labview?

  Any help would be much appreciated.  If you have examples of code and don't mind not to share, I would be very grateful.

  Thanks 1million

  
  

• Properties view displays all the settins, theme shows right and when I leave my computer on some time it crashes. How can I fix it with the windows CD? Compatibility Wizard says bad ini file__

  When I try to change the background, display shows theme instead, properties and when I leave my computer on at a certain time, it freezes. What can I do to fix this? How can I use windows CD to repair, when I put the CD and you press the 'r' key, nothing happens, please help?

  The lack of tabs in display properties usually indicates a malware infection. First run the scans and do not skip the preparatory work. If the machine stands (not frozen) in Safe Mode (where you'll be scanning), it is also a good indication of infection. Regarding the CD does not start, you probably don't have the computer configured to boot from the optical drive. But no matter, because enter the Recovery Console (which is what happens when you press 'R' from the XP installation disk) won't be useful in your situation anyway.

  Go through these stages of systematically General malware removal:
  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  Include analysis with David Lipman's Multi_AV of and follow the instructions to do all scans in Mode without failure. Read the Special Notes about the use of Multi_AV in Vista.

  http://www.elephantboycomputers.com/page2.html#Multi-AV - instructions
  http://tinyurl.com/yoeru3 - download link and further instructions

  When it failed, download Guided Help. Choose one of the specialty forums listed on the first link. Save and read his FAQ display. PLEASE DO NOT DISTRIBUTE NEWSPAPERS IN MS FORUMS

  If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). Please be aware that not all shops are skilled at removing malware, and even if they are, your computer may be so infested that Windows will have to be properly installed. If possible, have all your data backed up before taking the machine into a shop. MS - MVP - Elephant Boy computers - don't panic!

• does anyone have example script writing and reading XML file

  someone at - it an example script for writing to variables affecting and reading variables to an xml file.

  Discover the second to the last link on this page:

  http://www.Cisco.com/en/us/partner/products/SW/custcosw/ps1846/products_implementation_design_guides_list.html

  There are some very good examples.

  HTH, please rate all positions!

  Chris

• (Flash and reader) Download Manager window is empty. Nothing happens when I install the applications.

  I downloaded the latest versions of Flash and Reader. When I run the Setup file of the Download Manager window appears, but nothing happens. It just hangs, I checked the system specifications, and it seems that I am in the specification. I am using windows 7 Home premium.

  Do a clean install

• Inconsistency in Acrobat and Reader restrictions

  There is an inconsistency between the Adobe products for restrictions of document on a file that I received.  If I open it in Acrobat, it says 'None' for the security of documents, and any restrictions on the document say "authorized."  If I open it in the reader, he says always "None" for the security of the documents, but about half say the restrictions of the document (including signature) "unauthorized."  What gives?  I use the latest version of Acrobat and Reader, but I don't know what was used to generate the document.  I tried to save the document in Acrobat, but it doesn't help.

  Confusing isn't. The thing is, this isn't a tool of reporting for security. Rather, it is to tell you what you can and can't do now. Thus, the player may not change (for example). If editing is not authorized in the drive and declared as such. Other thgs can depend on to know if a file is active, signed player or whatever.

• Another view PDF in Acrobat and Reader?

  I created a PDF file in Adobe Indesign CS3.

  It was created from page 2.

  Because when I look in Adobe ACrobat 8 PRofessional it looks like I like: every broadcast has 2 p, the spread of departure has 2 pages.

  BUT when I open the same PDF in Acrobat Reader 7, it starts with a single page and all following deviations are wrong pages left and right!

  Why is this happening?

  I can count on that the reader/viewer sees the PDF in a consistent manner independent of the application to display!

  Is that what I can do to force the look the same PDF in Acrobat and Reader (such as "he should really do!)?

  What I really have to make a PDF in Acrobat and another to be seen in drive?

  / Larry

  I agree.

  I just happened to have the cab 7 Player on a test computer and noticed strange behavior.

  The correct answer is...

  You can expect different behaviors between Acr Reader 7 and other more recent reader products

  Because WHAT the Acr Reader 7 is obsolete.

  Do?

  / Larry

• Cannot convert win2k server - fails with the boot.ini on the version 3 and 4 error!

  Hello

  I am trying to convert an old win 2000 Server on an esx server, and I'm having a little trouble.  I am trying to run the converter and version 3 already tried with no luck.  On version 3, it manages at the end, think 97% I think and fails.  When I look in the logs of the converter, it seems to resemble a mistake with the boot.ini file.  I left the server for some time and today I have just spotted that the new version of the converter is out and although I'd give it a try.

  Unfortunately, I will have a chance to convert the server again.  It is not the last step.  Ive joined the output of the converter v4 logs.

  Here are the contents of the boot.ini file:

  boot loader

  Timeout = 0

  default = multi (0) disk (0) rdisk (0) partition (2) \WINNT

  "multi (0) disk (0) rdisk (0) partition (2) \WINNT="Microsoft Windows 2000 Server "/ fastdetect

  I would appreciate any advice or tips that I've been struggling with this and I have to get the server took off the old hardware that crack, on which it is running.

  Thanks, much appreciated

  "multi (0) disk (0) rdisk (0) partition (1) \WINNT="Microsoft Windows 2000 Server "/ fastdetect

  Error 1450 (hive loading error: insufficient system resources exist to complete the requested service (1450)) temporary loading hive
  .\vstor2-mntapi10-F1D31D11007E00000000000005000000\WINNT\system32\config\SOFTWARE under the name of the mntApi181664643429986496 key.

  Unable to load the registry hive
  .\vstor2-mntapi10-F1D31D11007E00000000000005000000\WINNT\system32\config\SOFTWARE, error 0x5aa.

  23202 error when you open the software hive

  Cannot read the news of the OS on the system disk: 23202

  You must increase the size limit of the registry on the source. For more details, see: Conversion failed with 1450 PlatformError under Windows 2000 or NT (1005979).

  Please award points if that's the right answer.

• When I start my system, some notifications invites to the top of their own and I still see the desktop.ini file in my documents/files please what this means?

  Every time I start my system, the Lync appears, a modem exe shortcut. files also appears, how can I stop this?

  I want to know the meaning of desktop.ini, I remove cause it's to show in most of my documents?

  Your thread was started successfully in the forum comments, so I moved it to the windows 'Repair and recovery' forum where is is more on the subject.  You must return to your topic and we tell which version of Windows you are using.

  Look in your startup folder to see if you see Lync and modem.exe shortcuts in this folder.  If so, remove them and you should no longer see these pop-ups when you connect.

  You can get rid of him, but it can return.  Desktop.ini is usually a file hidden, so you must have the display of hidden files and folders active if you do not see it.  Desktop.ini is a file that is present in many files and it is used by the process to "customize the folder.  It allows you to specify multiple behaviors to a folder and what desired icon displayed for a folder.  See http://msdn.microsoft.com/en-us/library/windows/desktop/cc144102(v=vs.85).aspx for a more in-depth explanation of the desktop.ini file.  For certain folders such as My Documents, you should probably leave it alone.  It won't hurt anything especially if you do remove it, but the folder will then behave like any other folder, you can create.

• I run my pc on safe mode but I can't change the screen reselution so that everything fits in and when I'm on fb I ts large and I can't read the writing can help you

  I have windows vista Home premium, I'll have to start safe mode because I was getting the r300 driver error all the time and I need to get writing and screen resolution changed so I can see it when I go to fb, I can hardly read the writing when I do the smaller screen, I can't play games like they wont take in can help you please

  Hello

  You can not change the resolution of the screen and follow other information support technician gave you while you are using safe mode.

  You must be in Normal mode to do so.

  See you soon.