Then I remove the camera on my Pavilion tx 1410 and install it on my laptop G62?

Similar Questions

• Remove the back panel for Pavilion AIO 23Touch q012

  How can I remove the back panel for Pavilion AIO 23Touch q012. I am wanting to upgrade my RAM. I had all the shots to come off, but there seems to be something in the Center which is not coming loose. There is a notch 'lock', but nothing to explain how to use it, it still means something to remove the back. All other indications I can find are for other models.

  See if this info is in your guide of upgrade and maintenance

  http://support.HP.com/us-en/product/HP-Pavilion-23-q000-all-in-one-desktop-PC-series-(touch) / 7902091/manuals

• my phone (samsung RV410-T01) stop automatically. I removed the battery when I was with her. and then it stopped and I can't open it with a battery or even I plug.

  my phone (samsung RV410-T01) stop automatically. I removed the battery when I was with her. and then it stopped and I can't open it with a battery or even I plug.

  Hello

  It is definitely a hardware problem so check with a real computer store (who makes his)

  own service workshop on Samsung) or the Samsung Support.

  Samsung - Support - click on the link of 'Laptop' under 'Office '.
  http://www.Samsung.com/us/support/main/supportMain.do

  Samsung - visit your country Site
  http://www.Samsung.com/us/common/visitcountrysite.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Then I remove the battery

  I have a HP 355 g2 I have running on the network. Then I remove the battery?

  Hello

  It is fine to remove the battery and run the notebook only on the sector.

  If you do not want to do (and you have a reliable power supply ) drain the battery at 40% charge, then remove it and store it in a cool place.

  Then, once a month, reinsert the battery, turn the machine on and let the battery fully charge.  Unplug the AC adapter and let the unit run until you start getting a "low battery" warning  Completely load it again, then let the battery drain to about 40%.  Shut down the laptop, remove the battery and store it separately in a cool place.  Repeat this procedure each month will help you keep your battery in good condition.

  Kind regards

  DP - K

• I have a Nikon D600 and downloading photographs to Lightroom 6.1 all images have their settings far from the truth and is no where near what is shown to the camera, i.e. temp is 3800 and tinted 80 magenta, other parameters are also in. other Nik

  I have a Nikon D600 and downloading photographs to Lightroom 6.1 all images have their settings far from the truth and is no where near what is shown to the camera, i.e. temp is 3800 and tinted 80 magenta, other parameters are also in. other Nikon cameras do not. Everyone knows about this problem?

  Looks like you are applying (accidentally) a "Preset" for these photos. Make sure that there is no preselection specified in the import dialog box, and the first (bottom) in the history of develop does not list a preset.

• Want to remove Elements 9 and install CS5 on my laptop

  I have CS5 installed on my desktop.  I want to remove the 9 Elements of my HP Pavilion dv8000z laptop and install CS5 on my laptop.  It has an AMD Turion 64 with a processor a 150 GB drive hard a a 120 GB.  The CS5 system requirements say that I need a processor Intel Pentium or AMD Athlon 64, I use this computer on trip and for workshops and not store large amount of files.  My question is will this handful of portable CS5 and if so, do I need you to remove 9 items and install CS5?

  Any help will be greatly appreciated.

  Mike

  Hi MJ,.

  Please try to run an Adobe Creative Suite tool Cleaner uninstall the Photoshop Elements 9.

  Follow this link to download. http://www.Adobe.com/support/contact/cscleanertool.html

  About CS5 works on your Machine, you can give it a try as it should get installation. If you get errors, please provide screenshots or logs.

  Kind regards

• I'm running a full scan of the system with my anti-virus software and it filled almost my laptop crashes, problem with the vga865.fon file

  I'm running a full scan of the system with my anti-virus software and it filled almost my laptop breaks down when it comes to: -.

  c:\windows\winsxs\x86_microsoft-Windows-font-bitmap-oem_31bf3856ad364e35_6.0.6000.16386_none_fb2d5aefb17b8d65\vga865.FON

  This file can be replaced.  When I scan this folder individually its fine, please help

  Thank you

  Hello

  What protection software antivirus you are running on the computer?

  Method 1: Check if you can run the scan in safe mode without in all questions

  Follow the steps mentioned in the link below to access the secure mode
  Startup options (including safe mode)

  Method 2: you can run Safe Mode security monitor, see the steps in the article below
  How to install the free Windows Live OneCare Safety Scanner and then scan your computer in Mode safe

  Method 3: Follow the steps mentioned in the link below to check your hard disk for errors, and then check if the problem is resolved
  Check your hard drive for errors

  If the problem persists,

  Method 4: Long file name could cause this problem, perform a backup of the file (copy it somewhere else), and then rename the file, check to see if that makes a difference

  Note: Copy the file to the original location.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 13 I want to download 13 items of the elements.  I have an older version of 10 on desktop and I paid and installed 13 on my laptop

  I want to download 13 items.  I have an older version of 10 on desktop and I paid and installed 13 on my laptop

  You should be able to make a selection to activate the new software by entering your serial number.  Then, you must enter the serial number for it.

• I get an error message with the Java plug-in is not installed. The required version: 1.5.0_11 download the Java plug-in from this server and install it manually. I downloaded and if I try to install it I get a message that it's already me

  The Java plug-in is not installed.
  The required version: 1.5.0_11

  Download the Java plug-in from this server and install it manually.
  

  When you try to load it shows that he is responsible.

  This has happened

  Each time Firefox opened

  == I had to reinstall Firefox on my new laptop computer

  Other issues: to correct the problems of security/stability

  Install/update Adobe Flash Player for Firefox: your version 10.0 r45; current version 10.1 r53 (Security important update 2010-06-10)
  See: Flash update
  -use Firefox to download and SAVE to your hard drive (save to the desktop for easy access)
  -the release of Firefox (file > exit)
  -Make sure that Firefox is completely closed (Ctrl + Alt + Delete, choose Task Manager, click the processes tab, if "firefox.exe" is on the list, made a "firefox.exe" right-click and choose end process, close the Task Manager window)
  -Double-click the Adobe Flash Installer, you just download to install/update Adobe Flash
  -When Flash is installed, start Firefox and test the installation of Flash here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507 & sliceId = 1

  • NOTE: under Vista and Windows 7 you may need to run the installer of plugin as an administrator by starting the installation program via the context menu if you do not get a UAC ask permission to continue (that is, nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
  • NOTE for IE: Firefox and most other browsers use a Plugin. IE uses ActiveX of Flash version. To install/update IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash Setup.
  • See also: http://kb.mozillazine.org/Flash ~ ~ Red:and~ ~ How to change options to add Adobe to the list of allowed sites

• I bought the box of the product Adobe Photoshop CS4 in 2009 and installed in my iMac. I plan to buy a new Macbook Pro and I am curious to know if I can still install my Photoshop bought in my Macbook?

  I bought the box of the product Adobe Photoshop CS4 in 2009 and installed in my iMac. I plan to buy a new Macbook Pro and I am curious to know if I can still install my Photoshop bought in my Macbook?

  Yes, your single-user license allows up to two simultaneous installations, activations.

  to install and activate a third you would need to disable (help > deactivate) on one of the other two.

• I bought the creative cloud and installed. However, my laptop was lost yesterday! How can I re - install the creative cloud in my new computer, I thank you.

  I bought the creative cloud and installed. However, my laptop was lost yesterday! How can I re - install the creative cloud in my new computer, I thank you.

  Download/install the desktop application, connect and install applications subscription.

  Cloud creation help / download, install, update or uninstall applications

  https://helpx.Adobe.com/creative-cloud/help/install-apps.html

  Cloud creation help / Creative Cloud to desktop

  https://helpx.Adobe.com/creative-cloud/help/creative-cloud-desktop.html

  Cloud creation help / sign out, sign in | Creative office cloud app

  http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html

  Help of activation & deactivation

  https://helpx.Adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html#a ctivate-how-to's

  Cloud creation help / install, update or uninstall applications

  http://helpx.Adobe.com/creative-cloud/help/install-apps.html

  Install creative Cloud applications

  http://TV.Adobe.com/watch/CS6-creative-cloud-feature-tour-for-video/installing-desktop-app s-of-creative-cloud.

• Is there a way to remove the camera from the lock screen application?

  I would like to turn off the camera on the lock screen application because sometimes when I remove my iPhone from my pocket to use, the camera app is on (and sometimes he records a video).  So somehow, the camera is occurs when the iPhone is locked, so I would like to disable this feature entirely, if possible.  On rare occasions, when I use my camera, I really don't mind access from my home screen as all my other applications (compared to my lock screen).  Thank you.

  There is no possible way to do it.

• How can I remove the Administrative Tools, network connections, printers & Fax and scanners and cameras my desktop icons?

  Recently, I installed a trial version of Tune Up Utilities 2009. During one of the scans/tune-ups, he gave me the option to display the Administrative Tools, network connections, printers & Fax and Scanners & cameras icons on my desktop. I checked ok, however, now, I think it's too crowded in my office and you want to remove them... right on the desktop, not everywhere else they are located. I tried everything I know to remove them without success. Anyone knows where is the menu option to display on the desktop so I can uncheck or choose Delete? I don't want to have to change all the .ini files or .bat to because I'm afraid I don't do it correctly and create other problems.

  Hello tellis1230

  I don't know what you have tried, but have a look here

  Right-click Desktop-desktop/properties/Office/Customization

  Uncheck what you don't want

  .

• Remove the camera data displayed in develop Panel

  My young grandson watched some of my images in Lightroom and hit a few too many keys, and now the camera data were available through all my images. How can I remove these data, not the image itself, but the have displayed in the picture while I'm developing it? So frustrating...

  Thank you

  Tanya

  They view > Loupe Info > show the overlay of information (see the menu of keyboard shortcuts).

• How can I remove the 32-bit version that my wife has installed on my portable 64-bit?

  Hello everyone who is reading this post and all, first thanks a lot for the effort!

  Thus, the question says it all

  It's weird to me that the icon is visible in the section of the Configuration screen

  But it is not found in the section installed programs...

  How to remove the 32-bit version?

  If I open the Flash icon I get a Flash Player Settings Manager local.

  The updates tab is nothing to be published which is weird for me also.

  I get a warning before an update is installed, that's fine.

  NPAPI plugin = not installed and cannot be verified

  Plugin PPAPI = not installed and cannot be verified

  ???

  PC Specs below

  

  The screenshot of the Config screen below

  

  Hi TheDude78,

  Flash Player installs the 32-bit and 64-bit versions on 64-bit operating systems.  This is because some browsers (Firefox and others) and apps that are still 32 bits version only and so only a 64-bit version, then you wouldn't be able to use the Flash in browsers/apps.

  The item you are referencing is a universal Settings Manager component that contains different options of parameters (parameters of Local storage, camera/microphone, reading, updates and other options) that will have an impact on the 32-bit versions and 64-bit of the player.

  From Windows 8 (and including 10 Windows) Microsoft integrates Flash Player for IE (and Edge in Windows 10) and the Flash Player Settings Manager you see has been installed as part of this process.  If you do not have the NPAPI or PPAPI Flash Player plugin (s) installed the button check now for these plug-ins will be disabled (since you are a nothing to check).  Once you install one of these plug-ins now the check button will be activated.

  Given that Microsoft integrates Flash Player in Windows 8 and above all they release updates to Flash Player for Edge and IE via Windows updates and they lock the associated files of Flash Player (ActiveX) to prevent users to remove them.  Open these files and delete them manually will very probably you not being only unable to re - install Flash Player for Edge and short IE to re - install the operating system to retrieve.  To my knowledge, this was the case with Windows 8.x to users who have manually deleted the embedded version of Flash Player for Internet Explorer and will probably be the case with Windows 10 users who do the same.

  --

  Maria