Boot problem after installation of Linux Mandrake 10

Similar Questions

• 650 HP laptop Windows 7 64-bit boot problem after installation of the graphics driver

  I bought the HP 650 laptop which came with Suse Linux.

  I installed 64-bit Windows and tried to install the corresponding graphics driver:

  High definition (HD) of Intel Graphics Driver

  as indicated in the list of drivers for Windows 64-bit here:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5225013&...

  After installing the driver asked me to restart the computer and after the reboot, boot, Windows boot after displaying the Windows logo on black background the computer restarts again before you boot into Windows.

  After this crash to start a startup repair is suggested and I can complete the restore of the system that allows me to connect to Windows but I have not installed display drivers and things like Aero do not work.

  I tried several times and re - install drivers and had the same problem after each attempt.

  Help, please.

  It's quite a few updates failed.  This can be linked to the issue, but we don't know really until the update problem is resolved.

  Read this document to Microsoft as it addresses this particular error.  It also has various tools to try in case the first option does not correct the problem.

  You can also try the Windows Update troubleshooting utility included in Windows 7.

  Go to start > Control Panel > find and solve the problems under system and security > fixed problems with Windows Update under system and security.

  Let me know what happens.

• Boot problems after installing Vista SP2 (KB948465)

  I installed SP2 via update.  During the update process there was a power failure.  After that (I don't remember if it's immediately after, or if a few days elapsed) I had problems with the startup.  Initially, seemed the Startup Repair to fix the problem, but not permanently, and the Startup Repair had to be used repeatedly just to start.

  After a few times of what is happening, Startup Repair did not turn, and the PC wouldn't start.  After about 5 attempts using the decision-making power, sometimes choose the Startup Repair, sometimes choose to load windows normally, he did start.
  I immediately did a system restore to return my PC before SP2 was installed.

  After the restoration of versions prior to SP2, Windows Update showed that the SP2 update failed.  It was on 9 November.  As I need my computer, I didn't reinstall SP2 until I had finished this work.

  As I thought that the problem is probably caused by the power outage, on 10 September, I reinstalled SP2.  Windows Update show no SP2 as an available update, then I downloaded and installed the standalone update.

  Between the 10th and today, 14, Windows Update has installed more than updated.

  Today, I was unable to start for the first time since the reinstall SP2 and Startup Repair has allowed me to open a session.
  I tried to uninstall SP2 via update.  The first part of it seemed to work, but when it came to reboot, the PC stopped at the end power to the bottom of the procedure.  I used the power switch to turn the PC back on.  After startup, the PC told me that deletion failed.

  Then I tried the system restore.  Unfortunately, the first available restore point was post - SP2 installation.  I restored it for the point that is as close as I could.  I tried to uninstall SP2 again through Windows Update.  This time, I receive a generic error message immediately (less than a second) - it does not attempt to go through the configuration - restart the procedure.

  I haven't restarted my PC since then.  Most updates have been downloaded automatically, and the PC tells me that a restart is required.  I'm a little worried that I will end up with a completely insensitive PC.

  I use an Acer Aspire X 3200 with Vista home premium pre-installed.  I don't have a Vista disc.

  Hello, Alex

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problem after installation of window upates

  Original title: windows 7 problems because microsoft updates this week

  Hello

  Since the latest windows updates this week, MS computer windows 7 my husband does not work correctly.

  Most of the time there was no internet connection, although my laptop in the same room connects.

  Worse, it's his slider has the circle of rotation that continues for hours.

  I did F8, then: Startup Repair. memory diagnostic; System Restore (pre update); last good configuration...

  I'm not grumpy, so don't want something complex to do.

  Without a doubt-related updates.

  His computer crashed the first time they went, in automatically.

  When I finally received it goes and makes system restore, then downloaded the updates one by one with reboot between each of them and create a system restore point before each new updated the laptop seems to work again.

  Stop us it, but the major problem started once it was lit again in the afternoon. Really frustrating and such a waste of time.

  Any suggestions?

  Do not clean the computer and reinstall, so please do not suggest that.

  My deep gratitude.

  JM

  Hello Craig,.

  I understand the inconvenience you encountered.

  According to the description, I understand her you are facing problem after installing windows updates.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. Did you do any change important before this problem?

  2. What is the brand and model of your system?

  3. Are you an error message\ error code on your system?

  To resolve this issue, you need to determine the cause of the Windows Explorer to stop functioning, try the troubleshooting steps below to help decide the issue.

  Method 1.

  Step 1. Try to go into safe mode with network and check.

  Start the computer in safe mode and check if the problem persists. Safe mode is a diagnostic mode in which you are connected with only the minimal necessary services and active pilots. Check if the number is reproduced.

  To switch to safe mode see the link given below

  Try to go to safe mode with networking and check.

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-safe-mode

  If the problem does not exist in safe mode, try to perform a clean boot and check.

  Step 2: Perform the clean boot.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. Check this question in the clean boot state.

  Reference: How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, read the sections "How to reset the computer to start as usual after a clean boot troubleshooting" in the link provided to return the computer to a Normal startup mode.

  If the problem persists, try Method 2.

  Method 2 System File Checker.

  You can run the System File Checker tool and check if it helps. SFC scan will scan system files corrupted on your computer. You can read the following article to use the appropriate System File Checker tool.

  Use the System File Checker tool to repair missing or corrupted system files.

  http://support.Microsoft.com/kb/929833/en-us

  Hope this information is useful. Please let us know if you need help with Windows.

  Thank you

• I have my computer give a problem after installation CC LR accendentialy

  I have my computer give a problem after accendentialy installation LR CC while I had 6.4 LR, no CC. I could not come back, and a new installation be not admitted. The CC tool does nothing and now I have a huge problem.

  I install windows 7 now still fresh on my pc and install again LR 6.4. I read diverend answers on the forums, my question is: should I turn you off my first LR? I can not install 6.4 and have temporary installed 5.7.

  Under the help button I would not find a deativate more. What should do?

  Hi rfh.

  Please let us know what exactly is the issue that you are facing after installing Lightroom CC?

  If you already have Lightroom 6.4, Lightroom CC will not be installed separately.

  The CC tool does nothing and now I have a huge problem.

  Please visit Adobe Creative Cloud desktop application does not open or shows a spinning wheel of progress

  I read diverend answers on the forums, my question is: should I turn you off my first LR? I can not install 6.4 and have temporary installed 5.7.

  Under the help button I would not find a deativate more. What should do?

  Lightroom does not disable the menu help . Uninstalling Lightroom should turn off.

  Kind regards

  Assani

• Problem after installation of the uniblue registry booster

  After installation, I started to make a request to make changes to this computer to yahoo and google bars of tools, then adobe who, most or all it's demand for the flash player to make changes to this computer. to do this, these pop-up windows asking constantly especially when change page or just read a. the toolbaars can ask once, but takes three clicks to accept the order, adobe flash player allow takes 5 clicks stops and then restarts and continues until I shud turn off the PC. Can anyone help?

  Hello

  Firstly uninstall the UniBlue - Panel configuration-programs and features or check with
  UnIBlue support for uninstallation methods.

  ----------------

  Then use the system restore BEFORE you uninstalled UniBlue which will ensure
  None of this is left in effect on the system.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  I hope this helps.

• Windows Vista boot problems, after an automatic update

  Can someone help me with the boot?
  When I start my laptop it goes until is displayed: 'No configuration update 3 of 3' and all stays at 0% for 1 or 2 minutes and after it stops automatically. It restarts again and appears the same following 2 minutes and stops.
  How can I fix this without having to install the DVD? I don't have the installation of my Windows DVD. But with on DVD with also windows vista, I tried to fix it, he showed me that it is not a compatible version of vista on the DVD.

  Hello

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• boot problems after "disk error-checking/control - automatically fix file system errors.

  I ran the two options 'check disk' after deleting some old programs and was prompted to restart. When it restarts it was all white screen, then I stop after waiting a few minutes using the power button. now it won't start at all - I have white screen and cannot even get into safe mode by pressing F8. white screen and the fan runs. I is not original boot CD, so tried a CD recovery Norton but would not start from that. I checked the monitor cables.

  It's a 2002 eveshamvale:
  Windows XP Home Edition Service Pack 3 (build 2600)
  Board: Gigabyte Technology Co., Ltd. 8ID533 1.x
  The bus clock: 100 MHz
  BIOS: Award Software International, Inc. 6.00 PG 11/11/2002

  would be grateful for any ideas.
  Thank you

  If you used the power switch, you can inadvertently damage your file system, so before wasting time to try a bunch of things, I could do this (or you may be wasting a lot of time to try things too):

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  There is zero logic to begin to try to begin to try to modify or copy files to a hard drive that has a corrupted file system, so this must first be fixed using the XP chkdsk program and run chkdsk on your hard drives may solve your problem completely.

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Satellite L300D-12U - two problems after installing Ubuntu Linux

  Hello

  I installed Ubuntu 8.10 on my brand-new u. Satellite L300D-12
  So far, everything works fine, but there are two things bother me.

  1. I have problem with suspends to RAM. It does not work. If I use the option to boot, the screen goes black but the laptop is still running (you can hear it).
  In addition, nothing happens when I press the power button to exit the sleep option.
  I completely close the laptop and restart to be back in Ubuntu.
  Maybe someone has some ideas how I can fix the problem?

  My/etc/default/acpi-support have these entries:

  # Comment the following line to disable the ACPI suspend to RAM
  ACPI_SLEEP = true

  # Comment the following line to disable the suspension on disc
  ACPI_HIBERNATE = true

  # Change the following of 'sleep' to use ACPI S1 sleep, rather than S3.
  # This will save less energy, but can run on machines more
  # ACPI_SLEEP_MODE = mem
  ACPI_SLEEP_MODE = standby

  2 battery life
  My current maximum battery life is 01:10 hours. On windows, it's 2 hours >. Maybe someone has some ideas of configuration to increase the time of battery under Ubuntu?

  Any help is appreciated.

  Thanks in advance.

  Kind regards
  Manual

  Hello manual

  I'm really skeptical about Linux here support. I heard that Toshiba will start with Linux support, but of course, it is not started yet.

  If nobody here can offer help I recommend you discuss this on some Linux forum. You have more chance of getting help here.

• Problem after installation of Windows XP Home on Satellite L355-S7812

  Hello

  I went down to WXP and after that, I have problem with the display driver. It does not work. I tried to use the Toshiba site and installation was successful, but without effect. Information about Device Manager, is that this driver is corrupted or missing. Drivers from the Intel site is not allowed to install. I have Mobile Intel 965 Chipset Family Extress.
  I also have the problem with some "IDE Device" I don't know what it is.
  I tied with WXP + SP2, SP3, and Windows XP Home edition. The same result.

  Help, please.

  Hello

  Strange sounds, running an Intel display driver won´t. It is the first time I ve never heard for such a thing. First of all:

  Installed all THE drivers of Windows XP on the Toshiba site? It's really important because there are essential tools that are the reason this machine works correctly and with his overall performance and stability.

  Are installed the chipset drivers? If Yes, then I do not double because the display drivers intel today should be able to be installed on your machine.
  What display driver you have installed? There are different types for the same chipset, and you should be careful when downloading these drivers for your machine. You should always look for drivers who adapt for MOBILE chipsets. In this case, you should look for the 965 Express mobile chipset.

  Regarding your problem of IDE device: do you have that you have installed the Intel Matrix Storage Manager Manager? See also the Intel site for this driver and the problem should go away.

  Welcome them

• Boot problem after upgrade RAM on Satellite A200 - 1 DR

  Hello

  I have a laptop Satellite A200 - 1 DR (with 1 GB of DDR2 RAM) and it is 5 days old. I bought an another 1 GB of Corsair RAM (DDR2 PC5300 5-5-5-12 as the first). The problem is that with both submissions the laptop not boots or boot boxes when the quiet boot option is enabled in the BIOS but windows Vista refuse to go or to restore.
  I also tested the memory only Corair on the first location of memory of the laptop, and it works perfectly (vista and memtest86).

  So I tried only two submissions on the second slot of memory of the laptop, and the two do not work: quiet Boot option on vista cannot go and memtest86 freeze after 1 sec. When the quiet boot option is disabled, the bios memory test freeze to 256 MB (with 2 memories it freezes at 512 MB).

  To me there seems to be a bug in the BIOS, you have any information on these bugs?
  Thanks in advance

  Hello

  a man who is not a bug in the bios. Have you ever heard of compatibility problems between the memory modules? The strange thing is that the memory modules can have the same features should not work together when they are not compatible with each other.
  You have two different manufacturers using different modules and pcb´s (printed circuit board).

  So if you're going to tell me what manufacturer's stock module I'll tell you that they are not compatible because I really know that privateers work right and good when you install corsair two modules (or how I want to say. TWO MODULES OF THE SAME MANUFACTURER).

  This is it and it s the same story in desktop computers. I have two desktop computers in my office at home and one of this for overclocking. I had a lot of modules in my machine, so I had a lot of problems at the time of the twinning of the two different modules. And that's the thing why I tell you this, because I really have knowledge about this thingys. :)

  Just buy an another corsair modules and put your stock on ebay module. You will see how your machine will work. Or better, bring back the corsair, sell your stock on ebay module and buy a pair of the best modules from kingston, you can get since the modules have absolutely no problems with compatibility.

  That's my opinion. And nothing to do with a few bugs of bios or something else...

  Welcome them

• Problem after installation of SP1 on my laptop

  Windows Update prompted me to install SP1. thought it was another update so let it. But after installing I rebbooted my laptop and got an error:! oxc0190036! 1501/91936 (netprofm.dll) I rebooted and ran the Startup Repair. After he runs Windows continues to start and then screen works in black with text of registry and gets stuck or feezes on the line above again. Need help!

  There is no anti-virus installed in my computer

  The lack of antivirus real-time protection isn't the source of your problem, Vista SP1.

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista#section_3

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the page following before otherwise connect the machine to a network or the internet and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problems after installation with XP Service Pack 3 (screen please wait too long)

  After the automatic updates is ready to install and upgrade to SP3 of XP SP2, I have selected only quick installation and the installation progress. For a few minutes, everything seemed perfect, and I could see "Validating license... blah blah components loading... create restore point etc..". And after that, I was responsible for "System restart" I did. And then, the system displays a black screen of "Windows XP" showing "Please wait...". "and the screen is left as it is around 6-7 hours and the 256 Kbps, the internet was still on. After that, I wake up, find the same on the screen and close by the computer strength.

  After the reboot, I've seen the system configuration of Windows XP Professional SP2 to SP3. And one of my theme request then said that "he delivered a fall has resorted to previous settings.

  So, is my Windows corrupted, or incomplete installation? How will I know that the installation is successful? Please guide.

  Thank you

  Hi xploreaj,

  I noticed that often happens when a system has something like Norton or McAfee installed and that it has not been disabled prior to installation of the SP3.  If you encounter any other problems, then it is reasonable to assume that everything is ok.  However, you can also scan your system with Malwarebytes to see if there is no infections present which your current AV software has not picked up on. (how to use Malwarebytes: http://www.bleepingcomputer.com/virus-removal/how-to-use-malwarebytes-anti-malware-tutorial).

  --> I hope this helps! Please mark it as correct answer or vote if it does :)<>

  http://www.pcuk.biz - my website
  

  Info from Microsoft about phishing . Information from Microsoft on the fake security software

• Rebuild (OS disk) drives can re - install Windows after installation of Linux?

  Hi folks,.

  Question: Can the disks to rebuild (OS + pilots) Re-install Windows, after a Linux installation?

  Goal: The goal is to alternate between facilities of OS: Linux - and Windows - and Linux - etc.

  Thanks again, good people.

  Of

  a valued customer

  You have more question?

  If you do not, please click to accept as a Solution to close this case.

  Tank You

  Cristian

• boot problem after bios update

  I was recently asked to install a new update of the bios on my HP Envy 15.

  After that installing Windows 8.1 is turned on and the version of the bios detected is Insyde F.56

  However, before the update, I had a dual boot by Grub2 and now I am unable to run

  the versions of Linux installed in children partitions on the same drive.

  This version of the bios seems to me to prevent the loading of Grub2.

  Can you help me to solve it?

  That's exactly what I did before:

  (1) linking boot-repair a liveUSB / recommended repair.

  (2) press ESC during startup / press F9 / select Ubuntu in the boot menu / start Ubuntu / run Startup Repair / recommended repair.

  In the case that grub won't load and windows starts.