There is no file names

Similar Questions

• Strange file names...

  Hi all

  I have come across this before and someone tried to help but so does more...

  The question I have is that my ReadyNAS102 I have several folders containing a large number of photos. My other half uses a Mac while I use a PC. The original question, I was using Windows 7 but I'm now using Windows 10 and turned up the same question!

  As you can see, there is a file name very strange that on the Mac, is stated correctly and contains all the data. On my PC (Windows 10), the file name is different, and when I try to open it, it displays the below error.

  All records have been made on the Mac and I can open them. So I do not understand why the strange record the fact. The properties of the folder show also 0 bytes that can be disturbing, but on Mac it appears correctly.

  Add to that, my NAS has suddenly decided to forget my IDs so now cannot access the web page again based so yet an another re-installation of the operating system is necessary... I tried to retrieve the password, but as usual when this happens which displays an error too. For this reason I am unfortunately unable to advise what firmware is installed, the last time I have open a session that saw an update available so I'd say I'm just 1 revision behind the current.

  Any help with this would be extremely appreciated I'm completely fed up of this product and the feeling that all the data is constantly vulnerable to losses.

  

  Hello

  You see these strange names in Windows because Windows SMB does not support the non-standard characters in the name, such as colons. Windows uses the colon to designate records for paths. Windows will not let you register the colons in filenames, but Linux prevents you from creating a colon in a file name. You should be able to access it through the GUI and rename the file/folder, or on something like FTP or SSH.

• Is there a change in FF8 for file names in the format UTF-8 sent as an attachment

  I send files with non-ASCII characters in their file names in the browser.
  
  I use the Content-Disposition: attachment; the file name * = "utf - 8" myfilename. "
  
  It worked well for FF7 and lower grades.
  
  In FF8, the file name is ignored (Linux and Windows).
  
  Is this a bug? Is there a better way to solve this problem?

  A good place to ask for advice on web development is the forum mozillaZine evangelism/Web development Standards.
  
  Aid to this forum are better informed on issues related to web development.
  
  You must register on mozillaZine forum site to post in this forum.

  See http://forums.mozillazine.org/viewforum.php?f=25

• How do you search a file name with parenthesis in there?

  Received a ton of files with duplicates, I need to delete.

  All the duplicate files end with '(1)' in the file name, for example: FilenameTest (1) .pdf

  I would like to find all files with '(1)' in the name of the file and then delete them, but spotlight search no parenthesis. This seems to be a documented problem (bug?). Is there a syntax or other workaround to force the spotlight to return a search with the bracket?

  Thanks in advance.

  The Finder, choose utilities go to menu, open the Script Editor and run the following exactly as shown:

  Tell application "Finder".

  Remove (each point of (choose folder) whose name contains '(1)')

  tell the end

  (138281)

• Since I compressed my NTFS drive last week, all the text of my files names are in blue. Is there a reason for this?

  Original title: file names have turned to the Blues

  file names have turned to the bruises on my dell hybrid. I compressed my NTFS drive week last to create more space and since then, all the names of txt on my files are now blue. is there a reason for this?

  Hello JordanMcGinn,

  Please see the link below regarding this issue.

  File changed police in blue: it's normal - blue means that the file is compressed

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-files/file-font-changed-to-blue/3efc8f58-edf8-4930-9e38-69feca448a92

  Thank you

• There the opening Style "File names" & "Names of Version" in LR?

  I (finally) move to Aperture and LR plans. My opening workflow was to import the original image file (a file camera RAW or TIFF file scanned) under its original name, make changes (which creates one or more 'versions'). I then rename the version based on a date-sequence numbering system, so that the original (unaltered) maintains its "original name.

  This method is possible in LR? Is there a file system and similar versions? It seems pretty basic info, but couldn't find anything in the forum search.

  Thanks, Dave

  If the version that you want to rename a file as a second saved from the original TIFF file, you can change its name by editing the file name field in the metadata Panel. If you want to rename by using a file name template, you can choose library > rename Photo (or press F2).

  If the version that you want to rename is a virtual copy, you must use the feature to copy name to name this virtual copy (a virtual copy being its own name any file). You will see the name field of the copy in the file name field when the metadata Panel is set to "Default" or "EXIF and IPTC.

  

  If you want to export a virtual copy as a new file version and have this new file using the name of the copy, include the name of the copy token in the filename template that you use for the exported file.

  Here is an example that I used recently:

  Original raw file. File name: 0001.RAW

  Virtual version of this raw file, cropped to 1:1 copy. Copy the name: Instagram

  Virtual copy exported JPEG file is automatically named: 0001 - Instagram.JPG

  (because I exported using a template configured with chips 'File Name' file name and then '-' then 'copy name')

• Is there a way to drop an image in indesign and then have captioned under that file name?

  Hello! I'm looking to help a colleague in a rationalization process. We display the full page of images in an Indesign Document, and every time we drop and image on a page, then we change the caption under the file name. I was wondering if there is a way to automate this process? All the scripts available?

  When you place an image you can activate the capture feature. There are the normal and live versions. The normal label creates a text is text, the live version creates a variable that would change if the image or the text of the meta-information changes, but it behaves as a single character which causes problems how the text will run in the text block.

  What is drawn on the Meta must be set up before in the legend, in place option.

  When you drag and drop an image from the finder or bridge you can not enable this option.

  BTW I use another way that seems faster. I assign a shortcut to the command of labelling and when I imported the image, I click on this shortcut, and secondly, I apply an object style that formats the text block including the paragraph style which can be different on a dark or light picture or a graphic.

  Normally, I edit all meta-information in Adobe Bridge, which is the fastest way to cope.

• Synchronize the folder removes the PNG files if there is a JPG file that has the same file name

  I often use the folder to synchronize and noticed that he tries to delete my PNG file if there is a JPG file that has the same file name. There is no problem with their import, Assembly, etc...

  The only solution is to disable the ' Remove missing photos in the catalog "on the prompt window synchronize folder so it does not remove it catalog.

  I have the latest version of Lightroom for Windows (v5.6) but it happened in previous versions on both Mac and PC.

  If someone has noticed this?

  -Pete

  "Treat the RAW + JPG as separate folders" enabled or not in preferences?

• When registering downloaded as part of the name of the files is saved and there is no file with the name name extension.

  I GET MY MAIL MOBILE. ME AND SINCE THE TWO LAST updates TO FIREFOX, I GOT THIS PROBLEM.
  THE FULL NAME AND THE EXTENSION WILL APPEAR IN THE BOX, BUT WHEN I SAVE THE FILE ON THE ONLY DISK THAT A PART OF THE NAME APPEARS WITHOUT EXTENSION.

  I GET MY MAIL FROM MOBILEME SITE FIREFOX LATEST VERSION.

  AS OF MARCH 14,2011 AT 06:50 IT IS NOT RESOLVED.

  Try putting quotes around the whole file name before you save it.

   "file name.mp3" 
  

• Is there a way to always display a file name in the import screen?

  I don't want to add everything in a folder to the catalog and it is very annoying to have to hover over the image to see the file name.  I have not found any toggle to display the name of the file.  Anyone have any ideas?

  

  This feature is not available in Lightroom 6.2/Lightroom CC 2015.2

  You can go back to Lightroom 6.1.1/Lighroom CC 2015.1.1 where the feature is available, or wait for the next update that may (or may not) have this feature returned.

• If I rename a clip in the body, is there a command to change the file name as in FCP7?

  In FCP7 I could rename a clip in final cut PRO, and then use a menu command to change the real file name to match:

  

  I can do this in body or prelude?

  Thank you!

  MtD

  This option is only available in the project manager.

  FEATURE request

• Change file names

  I have some videos imported Photos.  I put titles for videos, but when I click and drag them to my office, he still has generic file names (i.e. IMG_0013.m4v).  Is there a way to change the file names of videos and photos from photos?

  When I click on read the information, I can see both the titles and the names of files, but I can't change the file names.

  Thank you!

  J Hevel

  There are two ways to change the filenames of a photo or a video and two require export out of the library.

  The first method is to put the file in the title field name below the thumbnail and export the original

  

  with the following parameters:

  

  The second method is to export the original with this setting:

  

  If you put in "XXXXXX" you will get

  

  

• Unmasking the exported files file name extension

  Hello

  When you export a Pages (PDF, DOCX...) file (.pdf, .docx...) file name extension is hidden automatically, even if it appears in the file save dialog box. As it is for most of the files that will be sent to the employees on a PC, see the file extension name is very important.

  Is it possible to force Pages to let these visible extensions?

  Thank you!

  Paolo

  It belongs to your PC users own parameters so they have file extensions or not.

  On a Mac, just select the file and Get Info (command I) then check the box show the file extension .

  There is also a checkbox in the Save dialog to show or hide the extension.

  Peter

• Multiple images with the same file name no doubt prevent export

  iMac running OS X El Capitan v10.11.6; Photos 1.5

  I'm trying to export approximately 331 images and I get an error report saying that only 169 of the exported images due to the inability to create files for 159 of the images.  Then the report gives me the names of files of the first 100 images for which files were not created.  After looking at many images that would not create a file, I realized that, in any case, there was at least one, if not several, other images with the SAME EXACT FILE name as the image in question.  I can't change the names of files by right click on "info".  I tried to export the images and change the names of files to export using the sequential option and the option of album name - always having exactly the same problem.  I even tried not to export an image at once and change the name of the file individually or no available. Is there a work around that? I desperately need to export those specific images. I am trying to create a photo album for shown to mothers who choose a family with which you want to place their child/ren for adoption. I'm at my wit's end.  The kicker is I'm moving towards trying to export all my pictures, and that's going to be a HUGE problem in course for me, so I really hope that there is a way around this question somewhat simply. I am a hobby photographer and use the computer for businesses and crafts.  I've seen a few posts that included answers referencing "AppleScript" - I have no idea how to do something like that.

  From here on I will DEFINITELY ensure that my Canon continually numbers the names of image files and automatically resets.  For the other photos other than Canon, is possible to rename images during the import of the lot?

  All advice and help will be GREATLY appreciated!

  Finder has the ability to rename files with various models of lot.  Simply select all the files to rename, right-click one of the selected files, choose 'Rename X points... '. ", and then set the options and click on the button"Rename ".

• Sorting files in folders from the parts of a file name

  Hello

  I have a library of images that I need to build to work. The images have been recorded as this for example

  Dolce & Gabbana - the One_EDT_50ml.jpg

  There are 1000's of brands, so I need a script that looks for the part of the file name before the hyphen. and create a folder based on all the images that fall under this brand.

  If anyone can help?

  I've never used script before, but any solution I can work with that will work for me.

  Thank you

  Use the following syntax:

  Tell application "Finder".

  Repeat until (files window count 1) is 0

  the value the_offset to compensate for the "-" (get the window 1 1 file name)

  the value the_name items 1 thru (the_offset - 1) (get the filename window 1 1) as string

  move (all files 1 window whose name begins with the_name) (making the new file to the window 1 with properties {name: the_name})

  end repeat

  tell the end

  (143816)