There is no interface wireless on this system

Similar Questions

• I keep getting the message "there are no lightscribe devices in this system.

  I keep getting the message "there are no lightscribe devices in this system.

  I tried to open the recommended site for updates, but I get an error messasage.  Can you help me?

  Follow article

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&ObjectID=c01900020&JumpID=reg_R1002_USEN

• I have a xp system and my friend installed with a password, I can't reach him is there anyway I can get past this issue?

  original title: password, logon problem

  I have a xp system and my friend installed with a password, I can't reach him is there anyway I can get past this issue? I can't even logon to my computer.

  Hello
  Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the sticky below.
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

• disable hardware acceleration set my image loading problem. is there another way to get around this?

  System details:
  OS: Windows 8.1 Professional (64-bit)
  Graphics card: PNY NVidia GT 610 (2 GB)
  RAM: 5 GB
  Firefox version: 36.0 (32-bit)

  Since yesterday, when the images would load on Web sites, some of them would be entirely black, or black for the most part, with only a piece of the images loaded, only to fully charge a few minutes later.

  Disabling hardware acceleration has solved this problem, but reduces the overall performance of firefox. Is there another way to work around this problem, not to mention that disabling hardware acceleration?

  Note: The only 2 things I have tried have been reset firefox and a new installation of firefox. I don't want to lose my data of the addon and the custom settings of firefox, because it takes too much time for me to put them back where they are now.

  I'm also pretty computer savvy, if you can get quite technical with me. If I don't understand something, I ask.

  
  

• FF DOES NOT OPEN. SAYS IT IS 'NOT SUPPORTED ON THIS SYSTEM"USED TO WORK VERY WELL.

  Icon has disappeared from the dock, notice says "Firefox not is not supported on this system", the icon in the Applications folder has now a line circle and slash through it. That's happened? I tried to re - install and got the same result. Am running OS 10.4.11

  The latest version of Mozilla that works on the old 10.4 has Firefox 3.6.18. From Firefox 4.0 and newer Intel Mac and OSX 10.5 and newer is necessary to make it work.

  http://www.Mozilla.com/en-us/Firefox/all-older.html

  However since you use a PPC Mac there is an option of third parties to the http://www.floodgap.com/software/tenfourfox/

• My ISP changed the name of the mail server. There is no way to change this in Mail (El Capitan).

  My ISP changed the name of the mail server. There is no way to change this in Mail (El Capitan).

  I see not where do under preferences: accounts > incoming mail server, but it is grayed out. How can I change this? I don't mind editing a file. The obvious answer "Delete the account and add a new charge" seems all brain-numbingly stupid, especially because we USED to be able to edit this field! Not sure when it changed.

  You're in the wrong place.  Go to System Preferences > accounts Internet and select the appropriate account.  Click on the DETAILS button and you should find the server info.

• BIOS update failed: the process does not have this system. The process of the utility is not complete.

  I have a Thinkpad T450s and I'm trying to update the BIOS version 1.19 to 1.20. I've created a live usb with the 'el tortio' - image extracted using linux "dd". Once I boot on the USB under Legacy-BIOS and select upgrade, it proceeds witht the error message "the process does not have this system. The process has been cancelled. "I have disabled the protection against theft, AMT (I think this is the option) and I'm sure that I use the correct .iso file from the downloads section. I don't have a Windows operating system installed, but I'm able to start in various linux distributions using Legacy and UEFI methods.

  Here is my BIOS information.

  "Manage 0 x 0031, DMI type 0, 24 bytes.
  BIOS information
  Seller: LENOVO
  Version: JBET54WW (1.19)
  Release date: 06/11/2015
  Address: 0xE0000

  Runtime size: 128 kB
  ROM size: 16384 KB
  Features:
  PCI is supported
  PNP is supported
  BIOS is extensible
  BIOS shadowing is allowed
  Boot from CD is supported
  Selectable boot is supported
  ACPI is supported
  Legacy USB is supported
  BIOS boot specification is supported
  Targeted content distribution is supported
  UEFI is supported
  BIOS version: 1.19
  Firmware revision: 1.2 "

  What could you suggest to get the update disc to recognize my system?

  I think I've fixed the problem, I formatted FAT16 USB drive and not in FAT32 and also when you use the geteltorito command, it is preferable to use the-o option rather than a redirection ">"syntax. " An article said that it is best to drop in a DOS command line using the USB boot, then run dosflash.exe from there, however, I could not edit the .bat file, but it is an option however.

  I hope this helps someone stuck in a similar situation.

• Why said MAX % 22The list dial on this system is empty % 22% 3F

  I generate and deploy a real-time data acquisition and control system using LabVIEW RT (2012 SP1) and a PXI controller.  I tested my software and it works very well, now that I understand how to generate stand-alone executables for the host systems and target RT.

  Because of a bug on the side of RT (which I hope I have fixed now), I needed to 'rebuild' my PXI controller, reinstall software related and LabVIEW RT and reconfigure all the tasks of MAX (version 5.5).  To save the Configuration (and simplify reconfigure tasks and channels), I tried to export the configuration using the Configuration max Export Wizard.  However, he had a few (minor?) inconsistencies in some of the features (for example, NOR-488. 2), between the host and remote systems that generated errors.  I was able to fix this by asking MAX to do a Reset Configuration data on the host computer, and these problems went away.

  After exporting the export NI Configuration for my PXI file, I decided to use MAX to create reports on remote PXI and my host systems.  While considering the report of the PXI, I noticed that the last entry in the report, entitled 'Security', reads as follows:

  "The distance on this system access list is empty. This means that no remote system has access to this system. »

  What does that mean?  Where is the "remote on this system access list', and how is it maintained?  Note that I have not (yet) tried to deploy my project (formerly-work) to this controller (rebuilt), but I did not bring changes in LabVIEW, himself.

  If I look at the properties of the target of RT project, the VI server properties show (still) active TCP/IP (port 3363) with Machine access granted to "*" (all machines) and, similarly, all exported were allowed access.

  Am I missing something?  Can I safely ignore the entry above security report generated by MAX, or is there a hidden setting that I need to find and change?

  Bob Schor

  Bob,

  I'm not sure about your situation, but it seems to me that it is connected to the 'Security' settings Please see using MAX, section "Logging into your System.

  Norbert

• HP COMPAQ 8200 Elite Micro Tow: Can you tell if this system has slots for SSD or hdd adapter necessary - & gt; SSD?

  Can you tell if this system has slots for SSD or hdd-> ssd adapter need?

  WIN INITIAL 7pro

  i5-4-core - 16GB - RAM - fresh install [new 1 TB HDD] 8.1pro win 10pro Win

  HP COMPAQ 8200 Elite Micro Tower

  P / N:XY139EA #AB7

  PURCHASED 07/03/2012

  For w10pro c: / recommend reinstall to ssd or migrate ssd or even is...?

  SSDS all have sons the same size and holes threaded on the bottom and sides.  They all use the same fine metric threads live short (short, so they don't lower).  These screws must come with the adapter, and I live in general using the lateral holes.  Parts of the adapter have threaded, 3 holes and you will use the back ahead and away from those for channels of the drive Bay.  If you look at each side of a standard 3.5 "HDD, you will see the same same spacing holes.

  Some jobs need the SSD to shift to the left so the orientation of the SSD SATA power and data ports match exactly where they would be if the current drive was a 3.5 "HARD drive clutter.  An example is the drive in a Z620 of drawers which accept 3.5 form factor devices "and slides of drawers in the deep part of the case and automatically mesh with ports of power/data SATA back inside.

  Jobs that fuel just a loose cable and the data cable for the SSD is really doesn't matter much if the SSD is an adapter which keeps it more centered or offset to the left.  I've seen cases where a disk HARD 3.5 "given in the lower Bay and a centered SSD is in the upper drive Bay and there was nearly not enough cable length to reach easily shifted left for drives staggered in the Center.  You can see in the photo below that the Garland of feeding on the HARD drive has two unused SATA power below connectors, and there is not a lot of room between them.

  The card you chose seems good... solid metal.  For the HP 8200 Elite CMT I have access to screws 4 total special 6-32 UNC silver HP threaded screw threaded back ahead and away from the screw holes on both sides of the adapter, and then you use the extraordinary end threads metric short screws mentioned above to fix the SSD to the adapter, as shown in the pictures of Amazon.  These HP silver screw 6-32 no metric I'm talking using Torx or flat screwdriver and their leaders are trained to slip into the channels of the drive Bay.

  There are also other designs which are designed specifically for some HP workstations that include mounts insulation rubber with the sliding mechanism.  I don't think you have that... Here is a picture of eBay one of the 8200 Desktop Elite CMT demonstrating the existence of space on the left for 8 of these silver screw to store, which 4 are missing and used on 3.5 "single drive, you see there.  Don't throw those... they are not something, you can go to Ace hardware and buy.

  

• my wireless mouse works system restore not tried, but he did not correctly run because of an unspecifed error

  my wireless mouse works system restore not tried, but he did not correctly run because of an unspecifed error

  [Moved from comments]

  Hello

  1 Windows operating system is installed on the computer?

  2. What is the brand and model of the mouse?

  3. What is the exact problem that you are facing with the wireless mouse?

  Method 1:

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-za/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Update mouse drivers and check:

  Reference:

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:

  If you use a Microsoft mouse, then follow the steps in the article:

  Troubleshoot a wireless mouse that does not correctly

  http://support.Microsoft.com/kb/321122#top

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• After installing the updates, event viewer says "Some of the updates are not applicable for this system"

  I have a laptop Toshiba Satellite L355D-57901.  I am running Windows Vista Home Premium SP2.  I have the updatedWindows updates in place so that I can revisit before installing.  After you install the updates, I noticed for some time that when I check myEvent Viewer , there are several errors indicating that "Windows Servicing identified that package (the number of update i.e. KB980436 (security update) is not applicable to this system .).   Can you please tell me why?  Thank you very much.

  Hi Simply4real,

  Check out the link below to a thread with similar problem and check if it helps.

  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/c6883a0c-FF12-4bcd-86e0-4af3006eb7ce/

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is there a way to get around this?

  Hello. I've been thinking for a while now, buy Mass Effect, a video game developed by Bioware around May 2008. However, just to be sure that my computer (Toshiba laptop) could run, I went to www.systemrequirementslab.com, who, in case you're not familiar with it, something of a 'diagnosis', which gives you a 'pass' or 'fail' on the way in which the game you want to play will run on your computer is running. Everything going on, but a single component, which has been the video card. I will put the exact wording below.

  	Video card Minimum: NVIDIA GeForce 6 series (6800 GT or better), ATI X 1300 XT or better (X 1550, X 1600 Pro and HD2400 are below minimum system requirements) You have: ATI Radeon Graphics Processor (0x791F)		Upgrade suggested: Unfortunately, your video card does not meet this requirement. Click here to see some recommendations.
  Features: Minimum attributes of your video card 3D Yes Yes Hardware T & L Yes Yes Pixel Shader version 3.0 2.0 Vertex Shader version 3.0 2.0

  It is an important component to the game and my computer is a laptop, I have not seen any way to work around this problem, because I can't buy a new video card and use it. (Not that I would say justice my portfolio with these antics.)

  However, I may or may not be getting a new computer before college, so if that happens, (I'm first indicative to assume that at the time when this new computer falls from heaven, that a new operating system is not available...) I wanted to ask you if, with the specifications on the right, I would be able to play it on Windows 7 ?

  If not, then I would ask if there is a way around this problem now ? For example, is there an upgrade or something of this nature that I'm able to get? ("If it's free, it's for me!")

  In addition, if he has not been heard, my OS is Windows Vista Home Premium SP1.

  Thanks in advance for any help.

  I don't think there is a solution to your video problem other than an update of the driver. If no update is available, then buy a desktop computer that I had is the only other option.

• I get the following when you try to run programs such as Nero "this program requires the file AdvrCntr6.dll, which is not on this system."

  I get the following when you try to run programs such as Nero:-"this program requires the file AdvrCntr6.dll, which is not on this system."

  Please can you help me?

  Original title: AdvrCntr6.dll

  Hello.

  There is a guide for fixing here:

  http://pcsupport.about.com/od/findbyerrormessage/a/advrcntr6-DLL-not-found-missing-error.htm

• When open my pc it there some type 'check on NTFS file system.

  When open my pc it there some type 'check on NTFS file system.

  It sounds as if was scheduled for a check of the hard drive for possible errors.

  The screen you saw looks like this--> http://www.windows-help-central.com/image-files/windows-xp-chkdsk2.jpg

  Just leave the full check and Windows will start.  If this happens every time you start, after back - and to include in your message

  • the version of Windows you have, including the service pack (right click on my computer and click Properties If you are not sure)
  • It happened just before this behavior started
  • the name of the antivirus program that you have installed, if subscription is current, and if you allow the subscription expires

  is this type of link that you show related, I can not do is...? I don't understand your answer pls send me what I do?

• Error "could not find any DirectX 9 .0c compatible adapters in this system!" while playing the game sims 2.

  Original title: programs accidentally deleted now the directx features are not available

  Hello Im trying to play the Sims 2 that I played before on the PC, but the error message "cannot find any DirectX 9 .0c compatible adapters in this system!

  I accidentally deleted a program of direct x on Add/Remove programs during a cleaning upward. I think that's the reason why this message occurs.

  I tried to restore my computer to before the accident, but there was no earlier restore points. I also tried reinstalling direct x updates from microsoft, but always the same error occurs.

  I can't find discs that I got with the computer when I bought it.

  Here are my computer details.

  Microsoft windows professional (5.1, build 2600)

  Acer

  Aspire T660

  DirectX version: directx 9 .0c

  In the view of dxdiag no direct features x are available so I can't help him.

  Help, please! Thank you!

  Hello

  You can check for the link if available on the computer video card is compatible to run the game below.

  http://TheSims2.EA.com/help/detail.php?help_id=21