There never was a fix or error code "no available active device Mixer" on windows xp.

Similar Questions

• ... has been registered. There was an unexpected failure (error code 771)

  Upward until about a week ago Windows Media Center records very well. Suddenly, none of our TV shows will record. He gives us the same error message:... .to was not recorded. There was an unexpected failure (error code 771). I checked our storage and we have plenty of space for recordings since we generally remove them after watching. The computer will not be because of sleep mode that I was on the computer when the bubble of error is displayed. It will record only if I go into the Media Center and hit record on a show that is presented on the airwaves at the time.  It does not freeze during recording, just won't save.

  Hi Adolpha,

  1. don't you make changes before the show?

  Try the following steps to set Windows Media Center Receiver Service local only and check the result.
  a. Click Start, type services.msc and press to enter.
  b. in the list of services, double-click "Windows Media Center Receiver Service"
  c. change the startup type to automatic, and then click Start.
  d. click the Log on tab, select "Local System account".
  e. click ok to apply the changes and restart the computer.
  f. check if the problem persists.

  See the question "What should I do if Windows Media Center is unable to record a show?" in this article.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error code 643 prevents me to install my windows was last updated.

  original title: error code 643 prevents me to install my windows was last updated. Recently, when I go out I told me repeatedly that I have 1 new updates to install. It never goes away. Is there a link?

  When I try to install the latest version of my windows update fails because of an error 643. Also when I leave my computer I tells me several times that I have a new update. This has happened every time that I have left the system...

  Hello Ray Kouri,.

  Thank you for using the Microsoft answers Forums.

  Solution for code 643:

  It is a common problem with the updates of the .NET Framework.

  http://support.Microsoft.com/kb/923100

  Follow the steps in the link above to fix the problem.
   
  That should make the tirck for you.

  Thank you.

  Kind regards

  Augustine. UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments.

• How can I fix an error code 10 with my dvd/cd rom drive?

  Hello

  I have vista a window and my dvd rom drive has an error 10 code on it. He has demonstrated since the end of August and I'm not sure how to get rid or correct the problem. I was wondering if I did system restore to the day before where the error showed that would work? Although I don't know how to that date on the restoration of the system, I thought I'd ask. I have a hp pavilion dv9000 and I tried to delete the upperfilter thing and even used Microsoft solve this quiet a few times and nothing has worked, and since I downloaded Service Pack 2 a week ago he would keep trying to disappear and reappear in my device manager. So if there is anyway you can help please let me know!

  Thank you

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How to fix 8024200d error code in vista ultimate sp1

  How to fix 8024200d error code in vista ultimate sp1

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates:
  http://support.Microsoft.com/kb/836941

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How can I fix C00D199F error code when trying to burn a CD with Windows Media player.

  Original title: How can I fix C00D199F error code

  Error message when trying to burn a cd with Windows Media Player

  Hello

  1. what version of Windows Media Player do you use?

  2. the specific issue of burning CD using WMP?

  3. What is the exact full error message?

  4. what you are trying to burn?

  5. is the specific question on the disk?

  Method 1: You can run the fixit available in the link below and

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/GP/cd_dvd_drive_problems/en-us?EntryPoint=lightbox

  Method 2: Clean the disc

  Clean the CD or the DVD. To do this, use a disc cleaning kit. Or gently wipe the silver side of the disc with a soft and Lint cotton cloth. Do not use cloth of paper which can scratch the plastic and leave streaks. When you clean the disc, wipe from the center of the disc outward. Do not use a circular motion. If the problem persists, clean the disc with a damp cloth or a commercial CD or DVD cleaning solution. Dry the disc thoroughly until you insert the disc in the drive.

  Select a slower recording speed and check if that helps.

  1. in the Tools menu, click Options, and then click the devices tab.
  2. in devices, double-click the CD burner, and then click the recording tab.
  3. in the write speed list, select a slower speed.

  Method 3:

  Perform the clean boot and check:

   

  http://support.Microsoft.com/kb/310353

  Follow the above article.

  
  If you have any third party installed a CD/DVD burning software, uninstall them temporarily for Add / Remove Programs. Subsequently, check if you are able to burn CDs in Windows Media Player.

  Reference: Burn your own custom CDs

  Hope the above information is helpful.

• How can I fix the error Code OxC000005 Access Violation (Windows Vista 64 - Bit)

  How can I remove error Code OxC0000005 breach of access to my Windows Vista 64-bit computer.

  Thanks for your help.

  Hello

  1. When you encounter this error message?
   
  2. what hardware or software change has been performed on the computer before the question?
   
  Follow the links below to solve the problem.
   
  Method 1
   
  a. start your computer in safe mode
   
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
   
  If the problem does not occur in mode without failure, then search software conflict third party by following method 1B.
   
  b. how to solve a problem by performing a clean boot in Windows Vista or in Windows 7
   
  http://support.Microsoft.com/kb/929135
   
  Note: Please follow step 7 of the article mentioned above to start the computer normally, once you have completed the necessary troubleshooting.
   
  Method 2
   
  Analyze the computer for violations of integrity and corrupted files.
   
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  
  http://support.Microsoft.com/kb/929833
  
  Method 3
   
  An application may stop working unexpectedly on a Windows Vista SP1 or Windows Server 2008 computer
   
  http://support.Microsoft.com/kb/967227
   
  I hope this helps.

• Someone knows how to fix C015001A error code?

  Someone knows how to fix C015001A error code? I can't update my computer. It said that windows has not can check the updates. I clicked the windows update in the start menu. It does not work. I'm already the administrator.

  Hello

  Did you change your computer?

  Method 1:

  I suggest you to follow the links and check out them.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2:

  I also suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• How can I fix an error code 8024001 on windows 7

  How can I fix an error code 8024001 on windows 7

  Hello Ian,

  Windows 7 8024001 error code occurs because the Windows Update Agent is to update automatically.

  The steps below to solve your problem, try:

  1. run the Windows Update utility.

  2 control upgrade of Windows.

  • Research on Control Panel on the search bar on your PC.
  • Click all items in Control Panel.
  • Go to Windows Update.
  • Choose the option Check for Updates .
  • Click view available updates.
  • Find the update for the Windows Update Agent and only install the update.
  • If the installation is successful, proceed with the installation of other updates.

  Or try to download Windows Update at this link.

  3 Rename the file cache.

  • Type CMD in the search bar of you PC, right-click on it and select run as administrator .
  • Type the following command and press enter after each line:
    • net stop wuauserv
    • Ren %systemroot%\SoftwareDistribution SoftwareDistribution.OLD
    • net start wuauserv

  Thank you.

• How fix the error code 002000 with xbox

  Original title: Windows Update.

  How fix the error code 002000 with xbox

  Just right-click on the application and choose uninstall, and then reinstall it from the Xbox store for free.

  It may crash an offer little when downloading, but it works. If you see 'pending', just restart your pc and the application will be installed. Works great after that.

• Error code 8024001 when you try to use Windows update

  Original title: all the answers to fix the error code 8024001 fail.

  The answers to the difficulty of error code 8024001 fail.  He typed in the command prompt:

  net stop wuauserv
  Ren %systemroot%\SoftwareDistribution SoftwareDistribution.OLD
  net start wuauserv
  output
  accidents of Microsoft 'Fix It', requiring to uninstall and reinstall.
  I could not update my updater in some time and more and more programs become problematic due to lack of updates.  Many others have asked the same question, for some time now.
  BOO, HISS Microsoft!  How about a real solution on the "Fix It" site!

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  If you receive the Windows Update 8024001 error while trying to install updates, an update to Windows Update is installed. Depending on how many programs are running and the operating system files or folders are affected as this update is installed, it may take several minutes before you can install other updates for your computer. Try installing updates later.

  If so to resolve this issue, rename the Spupdsvc.exe file, and then try again to install updates. To do this, follow these steps:

  a: ClickStart, and then run.

  b:   Copythe following text,paste it in the run box and then click on OKor press on ENTRY:

  Cmd /c %WinDir%\System32\Spupdsvc.exe Spupdsvc.old ren

  c: try again to install updates. If you can't always install the updates.

  Hope this information helps.

• error code 525 appeared during the installation of windows update

  error code 525 appeared during the installation of windows update.

  I m using windows vista 32 bit

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

  or repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• I received an error code 800b0100 update. I just installed windows 7 student disc and my computer guard stop. I me trying to get the updates that might help the closing of the bottom.

  I received an error code 800b0100 update. I just installed windows 7 student disc and my computer guard stop. I me trying to get the updates that might help the closing of the bottom.

  Hi Happyrockgeek,

  Welcome to Microsoft Windows 7 answers Forum!

  This problem occurs if the Windows security .dll files are incorrectly registered.

  To resolve this problem, you can perform the two methods of troubleshooting, check if the problem is resolved.
  Method 1:
  Run (Checksur.exe) system update readiness tool.
  To do this, follow these steps:
  1. download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/default.aspx/KB/947821
  2. try to install the updates again.
   
  Methods 2.
  Reset the Windows Update components.
  1. to reset the Windows Update components automatically, click the fix button in the link below.
  http://support.Microsoft.com/kb/971058 
  2. click run in the file download dialog box and follow the steps described in the fix it Wizard.

  I also suggest you to install the latest version of Windows Installer 4.5.
  Follow the link below to download:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en
  and you can also try to install after you turn off the firewall.
   
   
  It will be useful.
   
  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum.

• I get the error code 646 when I try to install windows updates.

  I get the error code 646 when I try to install windows updates. I have Windows Vista Home Premium. I disabled my firewall and I still get the error code 646.

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• 80070652 error code when you try to upgrade to windows 10 Windows 7.

  * Original title: windows update error code

  80070652 error code when you try to upgrade to windows 10 Windows 7

  0 x 80070652

  ERROR_INSTALL_ALREADY_RUNNING ErrorClientUpdateInProgress

  If the upgrade process sticks or does not respond to 99%, it is better to wait and do nothing for 5 to 6 hours. If there is still no progress to close the Wizard Windows 10 upgrade, restart the computer and try to upgrade following the tips detailed below.

  You are using an ethernet cable or wireless to connect your computer to the router? Wired ethernet is faster and more reliable for large downloads. An ethernet cable is a low-cost purchase.

  Connect to a power supply, if your computer is a portable computer.

  Disable your anti-virus software so that the upgrade.

  I suggest you to download the tool for creating Windows Media 10 ISO and make a place in upgrade.

  Download the update of Windows Media Player 10 tool creation build 10586:
  http://www.Microsoft.com/en-us/software-download/Windows10

  How to download an ISO using media tool:
  http://www.tenforums.com/tutorials/9230-Windows-10-ISO-download.html

  How to make a upgrade in Place using method 1:
  http://www.tenforums.com/tutorials/16397-repair-install-Windows-10-place-upgrade.html#step6

  If this does not work please provide more information for your issue to be diagnosed.

  Restart your computer and wait 20 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. If the report is in one language other than English, please indicate the language.

  Please download and share with everyone a new copy of your log System of your event viewer on your disc one and post a link here. It allows to avoid confusion if you delete all previous copies of the log files of your OneDrive.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:

  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm