There you it a community somewhere on this French site?

Similar Questions

• How use TreeExpanderWidget, there is no example or specification on this widget, can someone tell me how to use it thank you.

  Now, I have a TreeView, it works fine.  But all the elements in the tree are displayed directly, I want that the collapse at the beginning and just expand on click, like the following image event.

  I searched all the SDK, there is no example of this.

  could a few examples or tell me how to configure these settings. Thank you.

  Usually, a tree is created with nodes is collapsed. Are you sure that you do not have somewhere call ITreeViewMgr::ExpandNode()?

  If your expanded nodes only reflect the previous state, the commentary to the header in ITreeViewMgr::ChangeRoot() mentions ClearTree (kTrue) for exactly this case...

  Dirk

• Hello. I just bought the Warcraft Battle chest but when I tried to install it, I am told that PowerPC applications are more supported. Is there a way I can work around this problem? Thank you.

  Hello. I just bought the Warcraft Battle chest but when I tried to install it, I am told that PowerPC applications are more supported. Is there a way I can work around this problem? Thank you.

  Except by running Mac OS X Server 10.6 inside a product such as VirtualBox or Parallels Desktop or decommissioning the BONE if possible on the Mac, no.

  (137544)

• msg.hbacommon.outOfSpace:There is reached for disk virtual server_1 - 000008.vmdk.  You may be able to continue this session by freeing up disk space on the partition relevant, clicking Retry

  Hello

  
  I've seen various threads on this topic but have not found a resolution or explanation that fits my specific scenario.

  
  I have an ESXi 4 server connected to a San (700 GB) with 1 virtual machine on that (Exchange 2010).   The virtual machine, I created has 4 discs, 50GB for the OS, 2 240 GB for database drives and 1 100 GB drive for newspapers.  In the operating system, each partition shows that I have a lot of space.  Last night, I'm moving on our Exchange 2003 Server mailboxes when all of a sudden I get this error message and stop the server:

  msg.hbacommon.outOfSpace:There is reached for disk virtual server_1 - 000008.vmdk.  You may be able to continue this session by freeing up disk space on the relevant partition, and then click Retry.  Otherwise, click Cancel to end this session.  Try again / Stop

  Retry reproduced the error... Stop stop the virtual machine.

  After I stop, I look in the client vsphere under hardware > storage > SAN where the disc is, and I find that I'm out of space.

  Now, I created multiple snapshots I could fall back on since when I was doing the initial setup of the Exchange.  I deleted a large number of people and got up to about 50 GB of free space showing on the SAN.  However, this number is declining slowly.

  Now, when I created the virtual machine, I configured the ramdisks to be of a certain size already (50 GB, 240 GB, etc.).  How is it that adding data (moving the mailbox) using more space than what is already assigned to the virtual disks?  This will become a huge problem that I have several other mailboxes to move and I thought that I had already allocated to the space I need.

  Why is that when the server is just sitting there.  Available free space decreases?  It has something to do with the type of disc that I created? (Thickness)

  Could someone please explain why this is happening and, more important still, how can I stop it without having to do anything too drastic?

  Hello.

  "I have an ESXi 4 server connected to a San (700 GB) with 1 virtual machine on that (Exchange 2010).   The virtual machine, I created has 4 discs, 50GB for the OS, 2 240 GB for database drives and 1 100 GB drive for newspapers.  In the operating system, each partition shows that I have a lot of space. »

  You have created 630 GB of thick disks on a 700 GB of data store.  Thick disks use this allocated space, no matter what operating system did with them in terms of use. Yes GB 630 thickness = 630 GB used space on the data store.

  "Last night, I'm moving on the mailboxes of our Exchange 2003 server, when all of a sudden I get this error message and stop the server:
  msg.hbacommon.outOfSpace:There is reached for disk virtual server_1 - 000008.vmdk.  You may be able to continue this session by freeing up disk space on the relevant partition, and then click Retry.  Otherwise, click Cancel to end this session.  Try again / Stop
  After I stop, I look in the client vsphere under hardware > storage > SAN where the disc is, and I find that I'm out of space. »

  You still snapshots (as you also mentioned) on this virtual machine as well.  With only 70 GB of free space on the data store, the snapshots are defintely going to be able to fill the volume in short order.

  «Now, when I created the virtual machine, I configured the ramdisks to be of a certain size already (50 GB, 240 GB, etc.).»  How is it that adding data (moving the mailbox) using more space than what is already assigned to the virtual disks? »

  When you create the snapshot, a new drive is created that will get all new disk writes.  So to copy a large number of mailboxes will use a lot of space quickly.

  "Why is that when the server is just sitting there."  Available free space decreases?  It has something to do with the type of disc that I created? (Thick) »

  Thick is using space, and convert it into thin disks may help to varying degrees - depending on the amount of writes.  It is above all the snapshots of the origin of the problem, or at least it's where you can focus your attention to solve this.

  "Could someone please explain why this is happening and, more important still, how can I stop it without having to do anything too drastic?"

  Remove snapshots and/or move this virtual machine to a data store greater would be the simpler of two corrections.

  Good luck!

• Is there a telephone line or somewhere, I can talk to someone from Microsoft? I am having problems and are not getting any help anywhere...

  Is there a telephone line or somewhere, I can talk to someone from Microsoft? I am having problems and are not getting any help anywhere...

  Hello

  Answers can probably help if briefly you questions answers - Windows Forums for your
  version of Windows. Please provide all the information we need to help us help you.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows/Forum

  How to ask a question
  http://support.Microsoft.com/kb/555375

  ====================================================================

  Call Service customer Microsoft direct-1-800-642-7676-heures 05:00 til time 9 PM PST (USA).

  Contact Microsoft Customer Service
  http://support.Microsoft.com/kb/295539

  Microsoft support - contact us
  http://support.Microsoft.com/contactus/?ws=support#TAB0

  Microsoft - Microsoft Technical Support phone numbers
  http://support.Microsoft.com/kb/319726/en-us

  Microsoft - email us
  http://support.Microsoft.com/contactus/cu_sc_selector_email?ws=support%2csupport

  Options chat or telephone of the solution - top-right - Windows 7 Center
  http://support.Microsoft.com/ph/14019#TAB0

  Microsoft - product selection solutions centers
  http://support.Microsoft.com/select/?target=hub

  Solutions Microsoft Fixit Center
  http://support.Microsoft.com/FixIt/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Error when you try to run Quicken 2011: this program is not supported under XP

  Win XP pro - Quicken 2011

  I am running win XP pro. When you try to run Quicken 2011 I get an error message: this program is not supported under XP.  What I do toget Quicken supported?

  For help on Quicken, I recommend posting your question in the community live Quicken .  The people there can help you better as we can in this forum of Windows. Boulder computer Maven
  Most Microsoft Valuable Professional

• Sometimes of firefox loads a page slowly with a single click, but if I double click it loads very well? Is there a reason or a fix for this? Overall, I really like Firefox. I always use the latest beta version.

  Question
  Sometimes of firefox loads a page slowly with a single click, but if I double click it loads very well? Is there a reason or a fix for this? Overall, I really like Firefox. I always use the latest beta version.

  Hi Jlhillhouse,

  It is difficult to solve the problems of the computer without knowing all the details. You should look at the link I sent you and especially to Firefox is slow - how to make it faster. I don't know any known issue as you describe, it's probably a very good bet for a response.

• iMac G3 Tiger Installation "the disk you inserted is not readable by this computer.

  Hello

  I try to install Mac OS X Tiger on my iMac G3 slot loading 400mH. The system is compatible all I checked before installing. I was able to start on the first disc very well. It is installed properly, until he asked for disc 2. When I put in the disc, it turns a little, and then do absolutely nothing. It just sits there even ask for the disc. After having let it run all night, I decided that the only option was to hold the power button. When I turned the machine back on, it gave me the error "the disk you inserted is not readable by this computer. He then ejected the disc.

  What are my options?

  One thing I forgot to mention, is that I have created these disks under windows with a program called TransMac. It was the first program that I found which could create for Mac bootable discs. The fact that he created the first a perfectly fine leads me to believe that it is not my Windows and Mac computer. I could be completely wrong, and if so what is a better program. I am not of any other Mac other than the G3.

  Thanks in advance!

  Other specifications:

  iMac G3

  400mH

  256 GB RAM

  120 GB disk with Mac OS 9 and OS X Panther (I'm trying to update for Panther)

  Historically, the Mac have trouble starting from system disks burned. As you say, the first one worked, so you might be on the right track. Have you tried to make a new second drive from the same program? Maybe there is a media problem or an engraving error.

  The other problem could be the source of installation of Tiger. Apple has distributed never freely as each copy that you find on the internet - free or paid - are pirated and may even be compromised. It happened more than you think. There are a lot of reports of people for an OSX version here as an internet download and even pay for it, only to find that it works at all. I've seen downloads Mac OS offered for sale even on sites like eBay (I point out them).

  So this begs the following question - where did you Tiger?

  If we get that worked, we ned to continue what I have some experiences with Panther and Tiger on the iMac of the same model which can be useful

• XP using a Dhcp Server if you have a cable modem. This is a Must?

  XP, network, Cable Modem. Do I have to use DHCP because I have nothing between me and the router? I watched hours of stuff on networks and nobody don't never went that far in anything. According to their patterns, Cisco or other, passed between their machine and the cable box. I've set up with static addresses (most of filmmakers disliked that sceme) and everything seems fine, but I have several others [don't know what to back]. To begin: Net bios on TCP/IP, WINSOCK, do I need? Well, I should have tried to find it, I should have written it down before I got here. Is it possible to save a project to the present, and I can drive around the site for a while? Now I get all these good advice from Youtube, and I bet everyone's probably laughing at me because you get ten different opinions to the same question. I have to add this. You can add memmory to your system for free! Yeh, you just go here and change this figure there, bam, more memory (long live Ram). It took a while, but for some, it may be a joke, but sometimes I can't tell when they're joking. Yes, I'll change a few settings. OOOPPPsss. Spybot, Ouch, he hacked me upward when I wasn't looking. DNS servers... Monitor drive..., the link layer,... .packet scheduler and now all of a sudden the TCPIP6 is suddenly. I've never seen a video on any of them, except 6, they were running 8.1. Cool. I hate just to bog down everything by adding all these other things if I don't. My settings seem to work very well, but sometimes things get a bit dodgy. Affecting those other things would make the program more stable, faster, or it's just the way it should be done? I hope all of you can remember when you have no idea, "what the hell do I need a Winsock for? I live in the desert.

  Hello

  Leave it as it is.

  DHCP
  http://www.bing.com/search?q=what+is+DHCP&QS=n&form=QBLH&PQ=what+is+DHCP&SC=8-12&SP=-1&SK=&GHC=1&CVID=1795ca6e2e5643be8bd65edf15171b31

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• When the computer starts first to the top, a window titled "run as" the question "which user account do you want to use to run this program?

  Original title: which user account you want to use to run this program?

  I use a computer that is running Windows XP SP3. Recently, when the computer starts first to the top, a window will appear titled ' run as ' the question "which user account do you want to use to run this program?" with two radio buttons. The default selection is "Current user" and there is a checkbox to "protect my computer and data from unauthorized program activity. The other button is for "the next user. I have to click 'OK' before you can run any programs.

  There is only one user on the computer. Why has this window began to appear and can I get rid of him?

  Hello

  That you recently installed which triggers this popup message initially upwards?

  You can try to perform a clean boot and check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to configure Windows XP to start in a "clean boot" State

  Note: Make sure that you put the computer to a Normal startup once you have completed troubleshooting.

• Desktop\SharedDocs is not accessible. You are not allowed to use this network resource. Not enough server storage is available to process this command.

  \\XXXDesktop\SharedDocs is not accessible. You are not allowed to use this network resource. Contact the administrator of this server to find out if you have the permission to access. Not enough server storage is available to process this command.
  I got the above message when I tried to access my room servert pc (XP Pro with Service Pack 3) from another pc Client (XP Home Edition with service pack 3) on a network share. I see all class document & readers who share in my network places on both PCs.
  There is no problem when I have access to XP Home Edition of XP Pro. I heard the pc installed with Acronis True Image to give to this question. But my two PCs are installed with it. Any solution.
  What I've tried so far on my pc (XP Pro):
  1. click on start, run, type regedit, and then click OK.
  2. Locate and double-click the following registry subkey:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
  3. on the right side, double-click restrictanonymous setting.
  4. make sure that that the value in the value data box is set to 0, and then click OK_ (why the default value is 0. I change it to 1, but always the same)
  5. close the registry editor.
  6. restart the computer.
  I also tried to enable the allow anonymous enumeration of SAM accounts and shares on XP Pro (default value is Disable).
  File and printer sharing exception is enabled in firewall. Don't have a firewall part 3

  The two guest account are capable of Simple file sharing in XP Pro box checked also checked.

  Hello

  Please visit the following link.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/three-computers-networked-fine-then-suddenly-the/3976b554-bb9c-4920-881f-38eb64480ca7

• When I try to connect it to my youtube account it reads as follows: there is a problem with this Web site's secure certificate.

  Site Web Cecurity certificates

  When I try to log into my youtube account it reads:

  There is a problem with this Web site's secure certificate.
  	The security certificate presented by this website has expired or is not yet valid. A site address different Web issued the security certificate presented by this website. Security certificate problems may indicate an attempt to fool you or intercept any data you send to the server.

  Anyone know how I can fix this problem?

  There is a useful article at this address on how to solve this problem. Good luck.

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_xp/security-certificate-errors-the-security/89a2a3d9-337b-4FA9-b10c-36caa78d5ab0

  Tim at the Ingenyes

• I suddenly have a problem when you try to download I get this message. "Cannot transfer to Internet Download manager." 0x8002801D error

  Error of the IDM

  I suddenly have a problem when you try to download I get this message. "Cannot transfer to Internet Download manager." Error 0x8002801D in windows XP. Pleasw help to y for remedy.
  Thank you

  Hello

  (1) what you're trying to download?

  (2) how you try to download?

  (3) what browser you are using to download?

  (4) don't you make changes to the computer until the problem occurred?

  Step 1: This error occurs when your browser and IDM are set to run under different privileges.

  Maybe you have set to run IDM with administrator rights. This is not correct. IDM Ouvrezledossier if please, right-click on 'IDMan.exe', select the 'Properties' menu item, switch to the "Compatibility" tab and uncheck the checkbox "Run this program as Administrator" (arrow 2 on the image). In addition, you must remove the compatibility with previous versions of Windows if there is none activated (arrow 1 in the picture).

  

  If this does not help, try to do the same for the executable file of your browser. In addition, turn off the feature with older versions of Windows and "Run this program as Administrator" checkbox.

  Step 2: You may need to run IDM with administrator once rights to register its DLL files. Exit IDM using "Tasks-> output" of the main menu. Then right click on IDM launch icon in the Windows (arrow 1 in picture) programs launch menu and select "Run as Administrator" (arrow 2 on the image).

  

  Then exit IDM again and run normally.

  Hope this information is useful.

• I can't acess all programs, all I get is chosen the program that you want to use to open this file, nothing works, why is that thank you

  I'm done with xpantspyware on my Windows XP some how I seem to have got rid of it but can not acess my control panel or anything without this arise (chose the program you want to use to open this file) can not get my internet explore have micorsoft essentials there have scan and says no virus detected is not came with any disk so lost here, what I bring to the Dr, or can it be fixed thanks

  You might have a problem with your .exe file associations.  Try the "fix EXE file association" on the link below.  Be sure to read the note at the top of the page regarding the .exe, complications of the association.

  <>http://www.dougknox.com/XP/file_assoc.htm >

  HTH,
  JW

• Whenever I connect to my hotmail account using Windows Live, I get a warning, "there is a problem with this Web site's secure certificate. »

  original title: security

  Whenever I connect to my hotmail account using Windows Live, I get a warning, "there is a problem with this Web site's secure certificate. »

  Security certificate problems may indicate an attempt to fool you or intercept any data you send to the server.
  	We recommend that you close this webpage and do not make this Web site.
  	Click here to close this webpage.
  	Continue to this website (not recommended).
  	More information If you arrived at this page by clicking a link, check the Internet address in the address bar to be sure this is the address you've been waiting for. When you go to a Web site with an address as https://example.com, try to add the "www" in the address, https://www.example.com. If you choose to ignore this error and continue, don't get personal information on the Web site. For more information, see "Certificate errors" in Internet Explorer Help.

  Some things you can try:

  You can have old certificates root on your computer.  Try to update your root certificates from the link provided in the paragraph "Root Update Package (intended for Windows XP only)" in the following article:

  "Members of the certificate program root Windows.
    <>http://support.Microsoft.com/kb/931125 >

  Depending on which version of Internet Explorer and Service Pack level of your machine, one of the following articles might help you:

  ' "There is a problem with the security certificate from the website" when you try to visit a secure in Internet Explorer Web site.
    <>0 http://support.Microsoft.com/kb/93185>

  "Certificate error Web page is displayed when you try to visit an SSL Web using Internet Explorer 7:"There is a problem with the security certificate from the Web site""
    <>http://support.Microsoft.com/kb/950067 >

  It is also possible that indeed, you will be redirected to a false site.  Check your file C:\Windows\System32\drivers\etc\hosts ensure that there is not a bogus entry for your hotmail login.  Generally, the only line that is required in this file does not begin with a character ' # ' is ' 127.0.0.1 localhost '.

  HTH,
  JW