the creation of "unique ID".

Similar Questions

• Restrict the creation of Instances of entity of an entity that is deducted

  Hi all

  I'm working on a script where I cut the engine of the determinations of the creation of instances of an entity that is inferred based on some condition. Explaining the scenario below:

  Entities

  -----------

  Global

  | ___EntityA

                                | ___Entity B

  Here the entity B is contained by entity A and one-to-many relationship.

  Entries of the attribute in entity A, multiple instances get generated in B as I infer the values of all attributes and the relationship in A1.

  Now let's say I have multiple instances of entity A. This will create instances of level B for each instance of entity A. Here's how it should look like:

  [Entity has]

  | Instance ___A #1(value of the attribute ID = ' A-I1 ')

  [Entity B]

  | _B #1 instance (the value of the attribute ID = 'B- I1 ')

  | _B instance #2 (value of the attribute ID = "B- I2" "")

  | _B instance #3 (value of the attribute ID = "B- I3" "")

  | _B instance #4 (value of the attribute ID = 'B- I5 ')

  : _B instance #5 (value of the attribute ID = "B- I6 '" ")

  : _An instance #2(value of the attribute ID = ' A-I2 ')

  [Entity B]

  | _B instance #1 (value of the attribute ID = 'B- I1 ')

  | _B instance #2 (value of the attribute ID = "B- I3" "")

  : _B instance #3 (value of the attribute ID = "B- I6 '" ")

  : _B instance #4 (value of the attribute ID = 'B- I5 ')

  : _An instance #3(value of the attribute ID = ' A-I3 ')

  [Entity B]

  | _B instance #1 (value of the attribute ID = 'B- I1 ')

  | _B instance #2 (value of the attribute ID = 'B- I4 ')

  | _B instance #3 (value of the attribute ID = "B- I7")

  | _B instance #4 (value of the attribute ID = "B- I8" "")

  | _B instance #5 (value of the attribute ID = "B- I9" "")

  : _B instance #6 (value of the attribute ID = 'B- I5 ')

  In the above scenario, each instance of entity B have several attributes and entity A has only 1 attribute. Based on the value entered for the an attribute entity A instances will be generated under the entity B

  what I want to achieve with this scenario is based on the value of the attribute identifier should not be all instances in twice throughout the entire structure. For example, if the value of the Instance of entity B with B- I1 has been generated under the Instance #1(A-I1) of the entity has then it should not create an instance with the same value (B - I1 in this case) in one of the other instances of the entity a. based on the scenario, the structure should look like this:

  [Entity has]

  | Instance ___A #1(value of the attribute ID = ' A-I1 ')

  [Entity B]

  | _B #1 instance (the value of the attribute ID = 'B- I1 ')

  | _B instance #2 (value of the attribute ID = "B- I2" "")

  | _B instance #3 (value of the attribute ID = "B- I3" "")

  | _B instance #4 (value of the attribute ID = 'B- I5 ')

  : _B instance #5 (value of the attribute ID = "B- I6 '" ")

  : _An instance #2(value of the attribute ID = ' A-I2 ')

  [Entity B]

  : _B instance #3 (value of the attribute ID = "B- I7")

                                

  : _An instance #3(value of the attribute ID = ' A-I3 ')

  [Entity B]

  : _B instance #2 (value of the attribute ID = 'B- I4 ')

  | _B instance #4 (value of the attribute ID = "B- I8" "")

  | _B instance #5 (value of the attribute ID = "B- I9" "")

  This requirement is type of emergency and guidance on this would be a great help.

  Thanks in advance

  Leila.

  Certainly not the right approach (by using a shortcut rule is almost never correct).  You need a good model and phrasings to make sense of an approach.  You will also need to express declarative "truths" in your rules.  Indicating that which is known to be true is a better approach (for declarative rules) that describe a desired outcome, given some data (procedural programming).

  I suggest you build this simple project first, and then experiment with the conditions of a rule.

  -Create a project

  -Add an entity "parent".

  -Add void entity under the parent named "child".

  -Go to the relationship with the mother (probably default to 'all instances of the child to the parent') - change this wording to "the child of the parent.

  -Open a document in the rule

  -Add a table

  -the conclusion is "the child of the parent.

  -The first column, first row "doors and windows". Firstly the condition (in the same row) ' parent = 'Hotel.

  -The first column, second line "another child" - Condition in the second row of 'TRUE '.

  -Remove the default line "otherwise".

  -Build and debug without screens

  -Add an instance of the "parent" and change its attribute ID to 'Hotel '.

  -Develop the "child of the parent" relationship and display two child instances "doors and windows" and "another child."

  -Add another instance of the 'parent' using 'Building' as the identifying attribute

  -Expand its children and notes ONLY a child "another child."

  -Export these test data to XML (more on that soon)

  Two important things to note:

  -the condition in the first row limited the creation of a child "windows and doors" to a specific parent instance (i.e. 'hotel').  Similar conditions "say" that the children must be created for parents.

  -children of each parent instance are (by definition) separate proceedings regardless of the value that you choose to use for their identification value (the value identifies, but is not necessarily unique in all of the different parents because the children of each parent are distinct from other children of parents).

  Back to XML... To prove the second point, look at the XML and note the structure (child entity is within the structure of entity (i.e. him "contained").   Also note the "id =...". ' attribute for the child instance is different for each of the bodies of THREE children.  There were 3 child instances deducted even though two of them show the same attribute value in the debugger.  you know there are three different instances because both appear under the first parent and the third appears as the second parent.

  I hope that this clears up misconceptions with "duplicates" you saw...

• Optimize the creation of large INDB exported as an interactive PDF

  I'm running into some problems of speed when creating an InDesign book that is exported as an interactive PDF.  This process is be script using JSX and running on a server of InDesign CC.  I tried various combinations of settings for interactivePDFExportPreferences, and which none does not seem to make a difference.  I don't think that it takes as long InDesign to create the book itself, most of the time is spent by exporting it as an interactive PDF.

  Some background information, a PDF page 'unique' for each page of the publication has already been created.  Most pages also took - what I call a superposition of hyperlink - another created INDD file containing rectangles with hyperlinks.  Each 'page PDF' is then imported into a new INDD and if there is a corresponding "hyperlink overlay" then it is duplicated on the top of the "single page PDF", then the result is recorded as a new INDD. The result is then an INDD for each page in the publication that will be used in the creation of the InDesign book.

  Now that we have an InDesign doc for each page we create an INDB script and that will be exported as an interactive PDF.  Here comes my question.  Someone has suggestions to optimize the creation of a book of InDesing that is exported as an interactive PDF?  The PDF file takes a little over half an hour to create just for a 80 page publication.  Some of our publications are 300 + pages, so the time it takes to create this size of a book and export to PDF is unacceptable.

  I would also like to note that the interactive PDF file that has been exported from InDesign book will be used with 3D issue online.  Added hyperlinks - hence the need for the interactive PDF - link ads/announcements in our publication on the 3D issue to the respective pieces of the inventory on our Web sites.

  Another solution, I'm currently entertaining is thread creation of the InDesign book and splitting it up which would result in several small interactive PDF which then I would write something to combine them into a single PDF file.

  with ( app.interactivePDFExportPreferences )
  {
      exportLayers = false;
      exportReaderSpreads = false;
      flipPages = false;
      generateThumbnails = false;
      includeStructure = false;
      interactivePDFInteractiveElementsOption = InteractivePDFInteractiveElementsOptions.INCLUDE_ALL_MEDIA; //APPEARANCE_ONLY
      pageRange = PageRange.ALL_PAGES;
      pageTransitionOverride = PageTransitionOverrideOptions.NONE; //FROM_DOCUMENT;
      pdfJPEGQuality = PDFJPEGQualityOptions.HIGH;
      pdfMagnification = PdfMagnificationOptions.DEFAULT_VALUE;
      pdfPageLayout = PageLayoutOptions.SINGLE_PAGE_CONTINUOUS; //SINGLE_PAGE; //DEFAULT_VALUE;
      pdfRasterCompression = PDFRasterCompressionOptions.JPEG_COMPRESSION; //AUTOMATIC_COMPRESSION (same time using auto, but resulting file is 2x the size)
      rasterResolution = 192; // No time diff between 144 or 192 DPI but there was a noticeable quality diff
  }
  
  

  Post edited by: Wayne Ritchie fixed the formatting of my snip of code.

  Thanks for the reply.  I agree, the script itself is not the issue.  I was hoping that someone out there knew a small export/parameter preferably that would help me.  I know that the quality of some graphics or even PDF files would reduce the time it takes.  Reduce the quality of the graphics and the PDF output have been attempted.  However, 3D issue allows Zoom and when the output quality was reduced and a user zooms in it looks pretty bad.  Also, it doesn't give me enough compromise time/quality to justify reducing the quality.

  However, I have found another solution.  PDFsharp is a great open source solution.  Instead of creating all INDDs using InDesign, create an INDB and export to a PDF file.  I can now create PDF files in the first place and use .NET and the PDFsharp library to combine all of the PDF files in a single PDF file.  This is a lot faster and without any sacrifice of quality!  I wish I would have looked into this type of solution before you spend hours trying to find a way to optimize the creation of the INDB.

• What is the limit for the creation of a primary key?

  Hi friends I have an another question... .Please help me...
  
  
  What is the limit for the creation of a primary key?
  
  
  Thank you

  I think that its 32

  Yes from the doc

  Primary and unique keys because composites are limited to 32 columns, a composite foreign key is also limited to 32 columns.

  Published by: Karthick_Arp on January 13, 2010 22:04

• How to get the creation Date of the site recorded for the footer output (printing to PDF)?

  If you go to Page Setup in Firefox, the option for the footer is the date and/or time of output. I don't want today's date that its print, but would rather than the Date of the creation of this web session saved as it is important to display this information with a legal matter. The research that has been done on a computer is out of date of creation down instead. I know that I could add the date by using the custom field for a footer in the Page options but prefer automated sound somehow when you print to a PDF (CutePDF). Please let me know.

  Thank you

  You might be able to automate this process if you open your PDFs with Adobe Acrobat Pro and make sure that the PDF file has a date of receipt:
  Idea of *http://smallbusiness.chron.com/print-date-time-stamps-pdf-55986.htm...

• Hi, me - Joshua, using Mozilla Version 38.0.1, please share the information of the creation of tab double... Thank you.

  Hi, me - Joshua, using Mozilla Version 38.0.1, please share the information of the creation of tab double... Thank you.

  Hello!

  https://support.Mozilla.org/en-us/questions/762043

  This solution should help you

  "

     Ctrl-click or middle-click the Reload button to open the current page in a new tab.
     Ctrl-click or middle-click items in the history of the Back and Forward buttons to open a page from that list in a new tab.
     Duplicate a tab with its history by pressing CTRL and dragging the tab to a new position on the tab bar.
     Dragging a tab in the browser window will detach the tab and move it to a new window, this is called tab tearing.
     Drag a tab back to the tab bar in the original or anther window to undo a detach or move a tab to a specific window. If a window gets empty (you tear off the last tab) then that window will be closed automatically. "
  

• Problem with the creation of New and subfolders only appear is not in the list

  Thunderbird is allowing the creation of some New & subfolders, but they aren't always in the list each time.

  Photo shows the current list, but they tried to get money records IMarEST & Bank. (My apologies for Hypersnap stamps)
  Sorry, but the photo is not download!

  I use the Windows x 86 Version 8.1 - Thunderbird 31.6.0

  How to subscribe to see the imap folders:

  • Right click on your email account name, and then select 'subscribe '.
  • IMAP folders available on the server will be listed.
  • Select the ones you want to add to your e-mail client
  • Click the button to subscribe.
  • Press the OK button

• How to prevent the creation of 15000 files for 300 MB each day Firefox

  Firefox creates files of 'file' in C:\Users\LeRicain\AppData\Local\Mozilla\Firefox\Profiles\dnm04rk5.default\cache2
  There are about 10,000 and 20,000 files I have to remove to get about 300 MB of space each day

  How to prevent the creation of these files in Firefox

  Here are the files from cache. Basically, it takes Web sites that access you a lot and records bits of them so they'll load faster the next time you visit them. FOR EXAMPLE if you visit Google.com much, Firefox will save some elements of this page in the cache so that the next time visit you Google.com, it will not have to re - download.

• Cannot complete installation of Firefox 34.0.5. The installer of Mozilla Firefox crashes at the creation of shortcut (.lnk Mozilla Firefox) (see downloaded the image)

  Cannot complete installation of Firefox 34.0.5. The installer of Mozilla Firefox crashes at the creation of shortcut (.lnk Mozilla Firefox) on the status bar of the installation window. OS: Windows 8.1 system had old version of Firefox, but is no longer in the list programs. There is no file helper.exe manually uninstall any previous version or remnant of an older version, but I don't have folder C:\Program Files (x 86) \Mozilla Firefox to. Thank you.

  Try this:

  • Download the full Firefox installation program and save the file to the desktop
    https://www.Mozilla.org/en-us/Firefox/all/
  • Start the installation by double-clicking on the desktop icon

• At the end of the creation of an e-mail account, that the program will ask a software password security device, I don't know what it is or where to find it.

  At the end of the creation of an e-mail account, that the program will ask a software password security device, I don't know what it is or where to find it. To my knowledge I don't have a 'software security device. I use Windows 7 on an IMac.

  Apparently, you have defined a master password at one point. The password protects passwords that Thunderbird remembered.
  You can reset the password. More information in this article.

  http://KB.mozillazine.org/Master_password

• Change the creation date

  I have different PHP files in different folders. I want to organize them by Date of creation. But I need to change the creation date in some cases. Can I do this?

  I select a file and the file > read > creation:

  but I can't change that here. Is it possible to change the date in "Create."

  The date of creation of a file cannot be changed.

• Full backup impossible. An error occurred during the creation of the backup folder.

  Having had a HARD drive failure and have replaced I have now bought a WD 3 to WD My Book for Mac. Plug and put in place to save. However will not achieve, and gives this error message

  Full backup impossible. An error occurred during the creation of the backup folder.

  Does anyone else have this problem?

  Paul

  How the drive is formatted?

• Export videos without losing the creation date

  In pictures 1.0.1 I am trying to export worth several years of videos to put on an external hard drive to save space on my main machine, but when I export them (via drag + drop on the desktop), they lose their date of creation - and, therefore, their context. They have different types of files, but a digital SLR, the iphones and old camcorders.

  I found more questions concerning the pictures, where the creation date is stored in the EXIF data for the photo, but I can't find similar data for these videos using "Get Info" or Inspector of QT movie.

  Any help would be appreciated.

  Thank you!

  export the unmodified original

  Videos have no EXIF data - only photos have EXIF/IPTC data - https://en.wikipedia.org/wiki/Exchangeable_image_file_format

  LN

• We live errors in the creation of recovery media. Please try again

  Hello

  I bought the windows 8 hp pavilion series laptop and tried to create the recovery with blank disc DVD - R disc.

  While burning data first drive the HP Recovery Manager application up the pop-up message like "we live errors in the creation of recovery media. Please try again' with the OK key.

  Press the button Ok app closed automatically once.

  Model laptap

  HP Pavilion n003tx-15 Notebook PC (Windows 8)

  Please someone help me.

  Thanks in advance

  Concerning

  Trehout

  Have you tried to burn in Mode safe?

  http://support.HP.com/us-en/document/c03481733

• Problem with XNET start VI after the creation of sessions

  I have a timed loop sending CAN messages via XNET screws. It works great, but I always lose the very first message. It matters little, I send the first message immediately after you create the XNET session or after a few milliseconds.

  The attached screenshot shows the initialization of my four sessions XNET. Although I am starting before the session with an XNET start VI, there is without success to get the first message.

  It seems that the sessions/CAN (selectable cards and HS CAN) interfaces are initialized only after the first call to write XNET. XNET write seems to imply XNET start (see documentation), but the appellant XNET start manually after the creation of sessions does not help.

  What I'm missing to get the interfaces online and ready before you send anything?

  I was able to solve this problem because they did not actually XNET screw sorry for this post.