Thermotron 8800

Similar Questions

• Thermotron control - basic steps

  IM an old VB/Visual studio encoder to make the jump to the Labview 2009.

  I need to control the temperature of a Thermotron 4800 environment test Chamber.  The communication is done via RS232.

  1. I intend to use the screws provided by Thermotron (there a LOT!).

  2. I just want to initialize communication and then set the temperature (set point), wait for the House to reach this target value and continue with the rest of my application.

  3. a simple VI with the minimum number of items would really help me get a grip on this.

  4. is there a relationship between VISA and the VI of Thermotron?

  5. I think I have to install the "IVI Compliance Package" to support the Thermotron screw.  I trust that there is an additional download of NOR?

  I hope someone can share the basic principles with respect to the above to help me get started on the right track.

  Thank you for taking the time to read / respond to the above.

  Scott

  I know that's not exactly the room you use, but here's some stuff I wrote for a Thermotron 8800.

  The main difference is my 8800 is connected via Ethernet, but I think you'll get the idea on how to make your own 'get temperature' and 'record' vi

  I just made a basic vi that uses a def type to select the command you want to send to the control Chamber.

• Update NVIDIA GeForce 8800 GT for MacPro

  Good afternoon!

  I'm looking to upgrade my video card. Right now I have:

  Mac Pro

  El Capitan 10.11.5 OSX

  2 x 2.8 GHz Quad - Core Intel Xeon

  32 GB 667 MHz DDR2 FB-DIMM

  ATI Radeon HD 2600 XT 256 MB

  Becomes the NVIDIA GeForce 8800 GT for Mac a better choice?

  Based on the linked web page below, in my view, the 8800gt would be a decent upgrade.

  http://gpuboss.com/GPUs/Radeon-HD-2600-XT-Mac-vs-GeForce-gt-8800

• HP Compaq DC7800 small form Fa: Nvidia GeForce 8800 GT 512 MB vs. HP Compaq DC7800 Small Form Factor

  Hello

  I'm not too familiar with the hardware upgrades, so I wonder if a Nvidia GeForce 8800 GT 512 MB would be compatible with my HP Compaq DC7800 Small Form Factor?

  Thanks for any help!

  Hello:

  Here is the link to the plug for the GeForce 8800GT...

  http://www.GeForce.com/hardware/desktop-GPUs/GeForce-8800-GT/specifications

  Certainly, this card will not work in your machine for two reasons.

  1. he needs a power outlet extra that doesn't have food dc7800.

  2. the draw of the power of the card (105W), is too much for the PCIe x 16 slot 25W prorated and 240W power your PC.

  These PCs is designed for light desktop for administration.

  If you want to add a video card, it must be a down a profile that comes with low profile brackets in the area.

  I recommend the AMD HD 6450 or Nvidia GT-610 low profile cards that will work within the limits of the power supply of your PC has.

• Connection Bluetooth to Nokia 8800 Sirocco Edition

  Help, please...
  I am trying to connect using bluetooth of my phone of Nokia 8800 Sirocco edition to my PC toshiba laptop Satellite Pro. It's PSM76E. I have Windows XP and I have already downloaded Nokia PC Suite, so it says that I need driver Toshiba Bluetooth 4.0 x or later that supports Nokia PC Suite.
  I searched the Bluetooth Monitor and Bluetooth Stack and downloaded the drivers from the site Web of Toshiba, but it isn't the version that supports nokia pc suite. I think it's version 2?

  Try the last version 5.10.06 BT-stack. It works for me with on another Nokia mobile phone.

• Thermotron TCP/IP interface

  Anyone converted Thermotron drivers for control of the House of VI which will run in LabView worm 9 or 10? Specificaly I have an attempt to interface with a controller Thermotron 3800 via TCP/IP.

  I recently posted something that might help you on another thread.  I haven't used the Thermotron drivers, rather, I used based on their recommendation of VISA here (example).

• LabVIEW 2009 crashing when opening thermotron 2800/4800 control live

  IM in the early stages of prog. for the control of thermotron and im unable to open one of the screws, I got from thermotron on the control pc. they can be used on my pc of office design using the same verse. LabVIEW.

  the gpib interface is functional and tested using the II software titles thermotron. I deleted titles II to remove possible conflicts.

  I set up file structure the same as working one and preformed a massive compilation on the new dir th4800, where are the screws news.

  any ideas on what's left to check?

  Thank you

  only, I have solved my problem.  I had worm. old NI-VISA installed.

  Thank you

• Update for NVIDIA GeForce 8800 GT error Code: 80070103

  I have in the last three days, tried to download an update for NVIDIA GeForce 8800 GT... every time I get the same

  Error code: 80070103.  What is the solution to this problem.  I really need this update, otherwise I have to replace

  my current graphics card.

  Hello

  Check with Nvidia Support and forums.

  NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
  http://www.nvidia.com/download/index.aspx?lang=en-us

  NVIDIA Support - check with the support that she might be a known issue
  http://www.nvidia.com/page/support.html

  NVIDIA forums - also check for the forums it might be a known issue or others likely to have
  http://forums.nvidia.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Error code 43 (Windows has stopped this device because it has reported problems) on nividia 8800 gt graphics card

  I have a computer with dual nvidia geforce 8800 gt graphics card graphics cards, but I recently started getting the following in my device manager error message: "Windows has stopped this device because it has reported problems. (Code 43) »

  I started getting this message out of the blue after moving from my computer to another room.  I knowingly did not change anything on my PC and have been released for about 2.5 years with no real problems to speak of her.  I tried to uninstall and reinstall the latest driver from nvidia and had no luck.  I don't have access to the nvidia due to the device being disabled control panel.  Also I tried to restore my PC to a previous save point with no luck as well.  A short reading on nvidia forums led me to try a registry scan and repair, but alas it was without result.

  Any advice on what could be the cause of the problem and the best solution would be greatly appreciated.

  Hi rd,.

  You could try to remove one of the cards, then update the driver.

  They should use the same driver and may be coflicting at startup.

  You should also check the power supply if it is a few years old.

  Also make sure it is off enough electricity for the installation of the split card.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• NVIDIA GeForce 8800 GTS 512 MB graphics card is disabled

  Hi people

  I have a Vista Ultimate 64-bit with SP2 PC.

  Recently, I lost all the videos on the PC, so suspect that it may have been overheating I opened the PC and clean up all the dust and lubricated fans.

  This resulted in the PC work again, except that I got the following error message:

  "at least a card on the system has been disabled because its driver is not compatible with the vga card driver"

  I then ran the MSI utility & driver CD and downloaded and installed the drivers from nVIDIA VGA and it seemed to install OK, except that the same message has popped up.

  I had a look in Device Manager and two NVIDIA GeForce 8800 GTS 512 MB graphics cards are always disabled.

  Looking at the properties for two graphics cards (status of the device - general tab) the following message appears:

  "

  Windows has stopped this device because it has reported problems. (Code 43)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  I clicked on the check for solutions..., but I don't have all the answers.

  So, if anyone has any ideas on this problem, I would really appreciate it.

  Kind regards

  Ross

  
  Ross

  The card may be bad, try on another computer to be sure.

  See the same problem in this forum: Error Code 43?

  http://www.TomsHardware.com/Forum/257021-33-code-error

  I hope I could help

• NVIDIA 8800 GT graphics card failure

  I running Windows Vista 32 bit.  I got a quad core 2 processor and 3 GB of ram. The problem that I am facing is with my graphics card, an Nvidia Geforce 8800 GT.

  Windows Vista has been updated the software on my computer recently, and during this update, my computer froze. When I restarted the computer, the screen resolution is much smaller, and I noticed that my graphics card had a Code 43 error. I first uninstalled the device and rebooted, and vista reinstalled the device itself. I always had the same problem after reboot.

  I don't know where to go from here... any help would be amazing.

  Hello

  It could be the video device that goes wrong. If the car video, you should be able to disable it and add
  in a video card. And of course, if you have a video card that is a question to replace.
  Rob - bicycle - Mark Twain said it is good.

• Windows disable my graphics card. (8800 gt)

  I was about to watch a movie and I started the movie and it makes a weird noise and froze the screen. I restarted my computer. When I restarted, windows aero was disabled and my second monitor was not showing any screen. I used Device Manager to uninstall and reinstall my card 8800 graphics, thinking that was the issue, I've done several times, then I went on NVIDIAs site and downloaded the drivers from there and then use them to install and it still does not. So basically my problem is my second monitor is not working and its completely ignoring the fact that my card is installed. in Device Manager, its saying windows has disabled this device because its does not work, or something like. anybody have any ideas on what is happening on?

  The card is no longer good sitting in its slot or - more likely - it has failed and must be replaced.

• VCS-control Mobile Remote Access and 7800/8800, DX, MX security profiles

  All,

  First thanks for your help.

  I am in the process of implementing a new pair of VCS - C/E and want to configure it to use remote devices on arm I have read the documentation and just have a few questions before ordering my new SSL for the VCS - C certificate.

  We chose to use the devices DX70, DX80, DX650, 8851,8841, use of the ARM. According to the documentation, I am to create a new security profile for each device and name them as full domain names

  DX650.subdomain.mydomain.com

  DX80.subdomain.mydomain.com

  DX70.subdomain.mydomain.com

  8851.subdomain.mydomain.com

  OK, here are my questions...

  1. subdomain.mydomain.com - is the name of my VCS Expressway. For example: vcsexpressway.mybusiness.com? so the entire FQDN

  DX650.vcsexpressway.mybusiness.com?

  2 when I create profiles course should I create one for each model? 8851, 8841, DX80...? Or can I just create one for the series? 8800, 7800?

  Thanks for your help!

  1. it is recommended to include the business control domain VCS in the security profile name phone on CUCM. If your VCS control FULL domain name is vcscontrol.mybusiness.com then you can use DX650.vcscontrol.mybusiness.com in the safety profile of the phone. These names must be present in the list of other names are the subject of the control of the VCS server certificate.

  2. you can create separate security phone profiles for each model.

• connectivity issues 8800

  Hello

  I have an application that connects through the socket connection to a server and sends and receives data. This app works fine for all the tested emulators, except 8800, for which device connections made on BES/MDS are not carried out. By direct TCP, I have no problem.

  Version of the OS 4.5.0.81

  Have you experienced these problems for 8800?

  There is a bug with this Simulator, try the 181 version instead.

• How to operate my 8800 Simulator Eclipse application?

  Hi all

  I would check the look of my application on an 8800.

  How in Eclipse 3.4.1 using Eclipse plugin 1.0?

  Thanks in advance,

  Marc

  Sorry for posting the question...

  I found the solution:

  You must add a new configuration of 'race '.

  In Eclipse, here are the steps to reproduce:

  1. click on "run > Run Configurations.

  2. request for BlackBerry Simulator, add a new configuration

  3. put in place and rename it according to your wishes (Debug-8800 for me)

  4 If ' Simulator tab, select "8800-JDE" in the list of profiles

  That's all! You can launch the Simulator 8800!

  If someone can point out a documentation explaining all the fields and options describing a configuration, it could be very useful!

  Thank you

  Marc