These last days on each screen by clicking on sparkles and top rollers at the bottom makes it difficult to work.

Similar Questions

• I have a hp photosmart c6180 all in one. for these last days, it does not switch. ins

  I have a HP Photosmart C6180 All in one.  For these last days, it does not switch. When I insert colored part of the cable into the printer then led on the cable is cut, that's why the printer does not illuminate.  Please let me know what could be the problem.  I thought that the cable may be defective, so I bought a new cable, but the printer does not work.

  Hi rajeshgaur,

  You can call our support lines to check if the printer can be repaired and how much he would run to fix the unit. The other option you have is to contact support and check in the trade trade program.

• For these last days, I sign whenever I want to access my MSN account.

  For these last days, I sign whenever I want to access my msn.com e-mail account. How can I fix it?

  original title: help by email

  Hello

  1. what browser do you use?

  If you use Internet Explorer to connect to msn.com, then try to follow the steps mentioned below.

   
  a. open Internet Explorer.
  b. click on tools and then Options.
  c. open the content tab.
  d. click the AutoComplete settings.
  e. make sure that everything is checked.
  f. switch to the Security tab.
  g. Select Internet Zone and then click Custom level.
  h. under the authentication of the user, check the option "Automatic login with user name and password".
  i. save the changes by clicking Ok.
   
   

  Hope this information is useful.

   

• First day/last day of each month

  Hello
  y at - it sql/script to get the first day/last day of each month.new to bi do not know the syntax
  
  If a point on the link to get these things will be highly appreciated

  Hello
  I suggest that you go through the following link

  (1) http://oracle.ittoolbox.com/groups/technical-functional/oracle-bi-l/obiee-date-comparison-1726677#M1729534

  Toget first/last day of the month

  (2) http://www.obinotes.com/2010/02/tip-to-get-firstday-lastday.html

  New to OBIEE---> http://obiee101.blogspot.com/2009/07/obiee-how-to-get-started.html

  Thank you
  Saichand.V

• use to insert the last day of each month

  Hi, I wrote this code but it did not insert the 20 December and it is January 1, and next time running is 31 January... I would like to work to make this insert every last day of each month...
  

  begin
    sys.dbms_job.submit(job => :job,
                        what => 'INSERT INTO hisrtu 
                                          SELECT rtunum, linked, dbchkd, chaqty, dbvald, ctrltr, meaadj, qtyrtu, month, year, entity, rtunam 
                                          FROM qtyrtu;',
                        next_date => to_date('31-10-2010 01:00:03', 'dd-mm-yyyy hh24:mi:ss'),
                        interval => 'SYSDATE +30');
    commit;
  end;
  /

  I don't know if it's because I assigned the date 31-10... In November it's just but December has not...
  
  Best regards, hope you can help me.
  
  I use oracle 9i

  Hello

  If you want the job to run at 02:00 the last day of the next month, then the desired argument is:

  interval => 'ADD_MONTHS (TRUNC (SYSDATE, ''MONTH''), 2) - (22 / 24)'
  

  In other words, if she finishes running at 02:30 on 31 January, then
  TRUNC (SYSDATE, 'MONTH') will be at 00:00:00 January 1
  ADD_MONTHS (TRUNC (SYSDATE, 'MONTH'), 1) will be March 1st at 00:00:00
  ADD_MONTHS (TRUNC (SYSDATE, 'MONTH'), - 1) (22 / 24) will be 22 hours earlier, i.e. 02:00 on the last day of February.

  logandro wrote:
  I don't know if it's because I assigned the date 31-10... In November it's just but December has not...

  Do you mean this line?

  next_date-online to_date (October 31, 2010 01:00:03 ',' dd-mm-yyyy hh24:mi:ss'),

  I don't think that's a problem. The next_date specifies only when it work baptisms. I guess he ran on October 31; you said it was running well on 30 November, 30 days after that. Something has to happen after November 30.

  Note that the interval argument is relative when the task completes. If a task takes 30 minutes to run, then

  interval => 'SYSDATE +30'
  

  means that, if it turns to
  01:00:03 October 31, then it will run again about
  01:30:03 November 30, around
  02:00:03 on December 30.
  02:30:03 January 29 and so on. If your business does that for a few seconds, it won't matter much.

  If you decide to use LAST_DAY, don't forget not that the hours-minutes-seconds referring LAST_DAY are the same as those of his argument.

• I downloaded a game on the internet, and now my screen does not match my screen. I have two large black areas on each side of my screen. How to resize my screen to fit the screen of my computer? (and yes I tried the button expand) :))

  I have two large black areas on each side of my screen. How to resize my screen to fit the screen of my computer? (and yes I tried the button expand) :))

  Hello val2000, welcome.

  These games is managed inside of Internet Explorer? If this isn't the case, then I suggest contacting the manufacturer of your computer for the latest pgrahics drivers. If installation of those who does not resolve the problem, then try to change your resolution to one of the following values (depending on the size of your screen):

  1024 x 768
  1280 x 800 (wide, common form for laptops)
  1280 x 1024
  1680 x 1050 (widescreen)

  To change your resolution:

  1. click on START
  2. click on "Control Panel."
  3. double click on "display".
  4. click on the tab "settings".
  5. change the resolution on your cursor tab and then click on 'Apply' at the bottom right

  Let us know what happens

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• If I click on Favorites and then scroll through the list of favorites, it does not show the entries in each file.

  * Original title: to access Favorites

  If I click on Favorites and then scroll through the list of favorites, it does not show the entries in each file but suddenly close showing the list of favorites. . I use Chrome and it happened all of a sudden. It was functional this morning. All the advice to fix this will be greatly appreciated

  Have you tried the Chrome forum? https://productforums.google.com/forum/#! forum/chrome

• Tools-options-customize-disable 3rd party cookies window is great and save buttons at the bottom of the screen don't show up so I can't change anything or scroll or mak

  Tools-options-customize-disable 3rd party cookies window is great and save buttons at the bottom of the screen don't show up so I can't change anything or scroll, minimize the window somehow

  Hello, please try to start firefox in safe mode - interferes probably an extension or theme...
  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• I want to create a Web site where people can choose a date and time and click on search, and it will find the photo of my HARD drive and show them on the page, is that poosible? If so could somone tell me how I will pay?

  I want to create a Web site where people can choose a date and time and click on search, and it will find the photo of my HARD drive and show them on the page, is that poosible? If so could somone tell me how I will pay?

  On your local HARD drive? N ° on your web server? Course

  How do you know php? There are exif function that can read EXIF headers on your images. You can use it in conjunction with the functions of file system scanning of the images on your web server. If you have thousands of images, you want to index the results in a database rather than search the real-time file system.

• Right-click DeptEmp.jsf and select run from the context menu

  Hello
  
  Please consider article Oracle Magazine "Catch Me If You Can ' Frank Nimphius
  at http://www.oracle.com/technetwork/issue-archive/2013/13-mar/o23adf-1897193.html
  
  In the article, it is offered several times to
  «... Right-click DeptEmp.jsf and select run from the context menu...'.»
  When you use JDeveloper 11.1.2.3.0 it will result in JDeveloper starting a browser requesting a URL "/ faces/DeptEmp" (without ".jsf").
  (Note that in the sample adfc - config.xml has a view with the id "DeptEmp" activity, but for pages without an activity view corresponding to the stream of unrelated task (adfc-config.) (Xml) JDeveloper starts a browser requesting a "/ faces/otherPage.jsf" URL (with ".jsf").)
  
  Still, I wonder if we should really run (JSF) pages, or rather an activity view in the flow of a task?
  
  After running into issues with calling (JSF) page URL rather than controller unbounded ADF task flows view activity URL in another forum thread [1], I try to avoid pages (JSF) (execution of the task-flow unlimited instead) running.
  to Re: login after logout is not possible using af: commandButton

  John Stegeman wrote:
  ... especially since it is very common for people new FAD (and indeed no-so-news-to-ADF people like me) to run their app via a page rather than the workflow and then wonder why it does not work :)...

  But also the Oracle documentation seems to suggest that page running a (JSF) is the way to go (or "a" way to go), see the section "41.2.1 how to run an Application in Integrated WebLogic Server "
  saying: ""in the navigation Application, select the project, a task flows, JSF page or file as the target execution. ".
  at http://docs.oracle.com/cd/E37975_01/web.111240/e16182/deployment_topics.htm#ADFFD22047
  
  So, who is? Is there a preferred way to run? Running a (JSF) page "also recommended"?
  
  -[1] ' login after logout is not possible using af: commandButton.
  during the connection after disconnection is not possible using af: commandButton
  
  Thank you very much
  Jan Vervecken

  Hello

  Still, I wonder if we should really run (JSF) pages, or rather an activity view in the flow of a task?

  The recommendation is to run the activity. I think it's just my laziness to boot from the JSF file in the case of the article (and given my article only has a single page in the workflow unlimited I wonder if my attempt failed, if there was a need for a navigation to another view in the flow of unlimited work). The risk from a page directly, it is a physical implementation of a view that could be used by multiple streams of different tasks (although the common use of the stubborn workflow is to go with fragments of the page, always bounded task flows could be defined using complete documents). His recommendation that you start an activity to view pages in order to ensure the ADFc is used (I wasn't even not aware of 11.2.3 to automatically change request activity instead of the file if there is an activity of referencing).

  Frank

• iMac spinning Rainbow wheel appears each time I click on something and running extremely slow

  My iMac (27 inch, mid 2011) is gel/loading every time I click on something. This occurs on the simplest tasks such as the opening of the finder window, open system preferences, right-click on desktop etc.

  It happened all of a sudden a few days ago and I have not updated recently... I noticed this occurring has started after I opened the Photos Agent app for the first time and imported more than 1000 images/videos of my iPhone6. Could this be the cause of the problem?

  Memory is 4 GB and it has worked very well so far. I checked disk utility and you have no error. Activity monitor looks great too.

  Most important - looking the best way to backup or clone the HDD that I have a very important job out there. What is the best way to do it? I have a Macbook Pro, as well as with 100 GB free on it. Can I use it to help somehow?

  If someone could help me out that would be great!

  Mac form:

  OS X Yosemite 10.10.3

  Processor: 3.1 GHz Intel Core i5

  4 GB OF RAM

  More than 500 GB free 1 t

  iMac, OS X Yosemite (10.10.3)

  Here are my results of EtreCheck (sorry for the bad pictures but I was unable to open the browser to copy paste)

  

  

  

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.7 ("Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.

  2. If you have already a current backup backup all data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, so any person with the required competence can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site of thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  Another indication that the test is safe in this threadand this onecan be found, for example, where the comment in which I suggested it was recommended by one of the specialists of the communityApple, as explained here.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy a particular line of text to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "Pastebin.") The title of the page is 'Diagnostic Test'. Under the title is a text box, headed by three small icons. The right one represents a Clipboard. Click on this icon to select the text, then copy to the Clipboard of your computer by pressing Control-C key combination.

  If the text is not highlighted when you click the icon, select it in triple - click anywhere inside the box. Do not select the whole page, just the text in the box.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you see an error message in the Terminal as "Syntax error" or "Event not found", enter

  exec bash

  and press return. Then paste the script again.

  10. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  11. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

  [Process started]

          Part 1 of 4 done at … sec        …        Part 4 of 4 done at … sec

          The test results are on the Clipboard.

          Please close this window.

  [Process completed]

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final "Process complete" message. If you don't see it in about 15 minutes, the test probably won't be all within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something. If you close the window of the Terminal, while the test is still running, the partial results will not be saved and you have to start over.

  12. when the test is finished, or if you have stopped it because it was taking too long, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see, but rather to see a mass of gibberish, you don't expect the "Completed" message is displayed in the Terminal window. Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  13. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but what're told you to do maybe not. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  ______________________________________________________________

  Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the "Test of diagnosis" referenced), I reserve all rights except as provided in the terms of use agreement for the site of Apple support communities ("CSA"). ASC readers can copy for their personal use. The whole nor any part can be redistributed.

• After leaving the screen saver, display shuts off and change to select the user account screen

  I have a windows7 32 bit desktop. While everything works fine the problem is whenever I leave the keyboard and mouse intact even for one minute, the display turns off and change to select the screen of the user. 'Disable the display' and "put the computer to sleep" has been on 'never' and screen saver changed nothing but the problem still persists.

  Please provide the solution

  Hi Sam,

  Sorry for the late reply.

  I understand that when your computer is left idle, the select user screen appears.

  The issue can be caused if the power plan settings are incorrect.

  To get a better understanding of the issue, I want to know:

  1. What is the brand and model of your computer?
  2. You did it changes on your computer before this problem?

  To resolve the problem, try the following methods:

  Method 1: Troubleshooting to be able to run.

  The resolution of the problems of power check things as settings timeout of your computer, which determines how long the computer waits before turning off the display or enter the mode 'sleep'. These settings can help you save energy and extend the life of the battery in your computer.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  After trying method 1, if the problem persists, try Method 2.

  Note: When you're done, restart your computer and check if your computer works fine. If the problem persists, try Method 2.

  Method 2: Change the screensaver settings.

  I suggest you follow also the suggestion given in the answer by Vijay B answered the

  May 14, 2013.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/disable-automatic-lock-with-Windows-7/1d45e806-6a8a-492C-A0C7-ac85b759ad66

  Please, try the above suggestions and we provide the information required so that we can help you.

• The Photosshop stars of the screen upward with all the files that I opened in the middle of the screen and opion boxes at the bottom. What happened to the normal screen with all this that listed on the right side?

  on Photoshop cc display shows pictures of the rental, I opened, but the right has nothing. How to bring back the old screen?

  Hi janiceh,

  It could be the new workspace to start in Photoshop.

  It has options to open a document in the left column, however, if you are not happy with this new workspace, you can turn it off by going to the Photoshop preferences > General > uncheck 'Show the workspace to start' > restart Photoshop.

  Kind regards

  Claes

• My PhotoshopCC workspace is suddenly 'long' for my MAC screen.  I cannot see the bottom of the workspace and therefore cannot see the bottom of the vertical pictures.  How can I get this problem to what it has always been - set of the workspace editing on

  My PhotoshopCC workspace is suddenly 'long' for my MAC screen.  I cannot see the bottom of the workspace and therefore may not work on the bottom of the vertical photos.  How can I get that back to mount on display?

  Hi wassily.

  suggest you go menu window > workspace > reset Essentials

  and who needs to reset your workspace to the default.

  Kind regards

  Claes

• For these last days, Firefox was freezing after I open it without even reaching the homepage - grateful for any light you can throw on this!

  I don't seem to be able to put a screenshot in this post but the screen is basically more often black. I tried to uninstall and reinstall Firefox, to no avail. He suddenly began to do last week. Is there something I can do to put it right? I'm running a 64-bit Dell laptop if that's any help?

  Thanks for any help you can provide!

  Kind regards
  Paul

  Is working in normal mode with hardware acceleration disabled?

  If it works in Mode safe mode and normal mode with all extensions (Firefox/tools > Modules > Extensions) off and then try to find which extension is the cause by allowing an extension at a time until the problem reappears.

  Close and restart Firefox after each change via "Firefox > Exit ' (Windows: Firefox/file > quit;) Mac: Firefox > quit Firefox. Linux: Firefox/file > exit)