Thick virtual disc used in the graphical interface format
I understand that the thick of default VMware virtual disk format when you work in the GUI is lazy-reset, is it also the case during thin conversion to think during a migration process? I want to start using discs eager-reset to zero, already built new models with them, but would also convert all my existing disks to this the simplest format possible and, hopefully, without turning power off virtual machines.
As far as I KNOW the only way to convert the disks of thin thickness while the virtual machine is running is by performing a storage vMotion, where you can select the disc format. Otherwise turning off the virtual machine, select Browse datastore and inflate each hard.
According to http://communities.vmware.com/message/1269427#1269427 manual inflation will create a disc of zeroing eager thick.
Tags: VMware
Similar Questions
-
How can I get a virtual machine to see the graphic material?
Environment:
1. I use a computer HP Pavilion dv8327us laptop is equipped with a nVidia GeForce Go 7600 graphics card.
2. I am running VMWare Workstation 7.x
3. I'm under Ubuntu 10.04 as a virtual machine.
4. I am running Windows XP Pro SP3 as the host machine.
Location:
1. the virtual machine seems not to be able to use advanced graphics card features.
2. the VM sees the card as a SVGA II adapter.
3. the virtual machine can't determine the system LCD screen refresh rate.
4. the virtual machine can't do use an external display.
Workarounds failed:
1. an attempt to solve this problem by installing the latest nvidia 260.19.44 graphics driver failed. The installation of this driver has resulted in an error message indicating that no supported hardware can be detected. The conclusion I draw from this is that either or however the machine emule virtual graphic adapter in the system is not quite the same as what is emulated.
Question:
1 is wrong to think that we could install drivers of graphics cards in a virtual machine and wait to turn the virtual machine to see the graphics card in the same way as the host machine? If Yes, then how can we do?
2. is it possible for a virtual machine to use an external monitor?
Thank you.
Virtual machines have graphics cards ATI and NVIDIA - or else.
Use of virtual machines VMware SVGA 2 cards - support or VMware SVGA cards with 3 d
You need the drivers included in the vmware-tools - install other drivers is the sabotage of the machine virtual and not useful!
-
Any camera regardless of the interface is available for use with the LabView interface.
Hello
I intend to go for some CMOS camera,
but I have a huge doubt before buying, the camera of menttioned above is not anywhere in this list. Nor can I see any type being supported USB device.
The question is
- is a camera regardless of the interface is available for use with the LabView interface?
- Can I build a VI to communicate with any device image and recording of camera and take the data?
Any kind of help or advice is greatly appreciated... I have to buy a CMOS camera and begin to run.
Thank you...
Hello Virginia,.
I am pleased that this information has been useful, one thing I wanted to mention is that USB 3.0 has its own standard USB 3.0 Vision which is currently not supported. If this camera is also Direct Show compatible then you will be able to acquire an image using IMAQdx and manipulate all the attributes that are published to the API Live Show.
I hope that USB 3.0 Vision will be supported in the near future, and we tentatively announced for this standard of communication for the August 2013 Vision Acquisition Softwareupdate.
See you soon,.
-Joel
-
Use of the graphics card in Premiere Pro performance
Hello
I have PC, not bad but not the best. I would say that the average:
P67 Extreme4 MB
http://www.ASRock.com/MB/Intel/P67%20Extreme4/
Processor
Intel Core i7-2600
http://Ark.Intel.com/PL/products/52213/
RAM
4x4GB DDR3 - 1333
http://www.crucial.com/store/partspecs.aspx?IModule=ct51264ba1339
Graphics card
NVIDIA GeForce GTX 460 768 MB
http://www.nvidia.co.UK/object/product-GeForce-GTX-460-UK.html
Power supply
Cool Aero - 700W
http://UK.hardware.info/productinfo/112115/Aerocool-E80-700-700w#tab:overview
I'm working on Premiere Pro CS6, I use Magic Bullet Looks, Twixtor ect.
I know my GTX 460 is certainly slowing down and planning buy better card.
Question is: how the right card to buy?
How use of the graphics card is in Premiere Pro? It's something like just help for processor or do a half work?
Buy GTX 780 or just 760 or about 780 price halp?
To render faster than you suggest to buy new processor and good graphics card or leave the processor and buy Hi-End graphics card?
Hackers Page - what video card to use?
It looks like that particular 460 is not a very good card for this computer because there is not enough VRAM for MPE material. A 650 looks like more than enough.
Article:
Check the bandwidth of your current card memory and compare it to the expected update map. For example, a GTX 460 is faster than a GTX 650 because of bandwidth memory. Only if bandwidth memory is higher after the upgrade, can you wait a few performance WINS If the rest of the system is to him
-
Hello
I seem to have a problem with an add on the graphics card in my Pavilion p6523w
(Yes, this 12 '' long card fits into the case without problem)
upgrades made so far for this machine:
Antec 600W PSU
additional hard drive
upgrades memory 12 GB (2x2gb original + 2 x 4 GB modules)
AMD Phenom II 1045 6 hearts
ASUS 144 Hz 27 "monitor
The ATI integrated graphics card is disabled in the bios, and I was running an evga gtx 460 for two years with no problems.
When I "upgraded" to a new gtx Gigabyte 970 OC with 4 GB of vram (not the version of g1, the next one down) I came across a problem
the new video card will not work at full load when running the games.
On tests of reference such as furmark and the reference of the sky, it works fine.
On World of Warcraft and Second Life different viewers, it only works 25% rates of burden and the frame down about 15 fps at 32 fps. (it is slower than the old gtx 460)
Other people with this same card to receive 100 + FPS on graphics settings maxed out in Second Life
This is not a matter of processor bottleneck, because the processor will never more than 60 percent load while it is happening.
I tried different versions of drivers availible for this card.
Whenever I changed drivers, I booted in safe mode and DDU to remove the old drivers before installing a different version.
No change in performance between driver versions.
No change in performance with different graphics settings in games.
No change in performance with different settings in Control Panel NVidia
I'm starting to wonder if there is an incompatibility between this card and the motherboard Bios causing this problem.
Is the newest bios American Megatrends 6.04 version?
Thanks in advance for any help with this.
Mark S.
There is no problems listed under the dxdiag for my system. Apparently, this card can work with older motherboards.
I just discovered that this issue of throttleing was a fairly frequent problem quite some 970 and 980 based gtx cards and a solution that works for me.
There is a 3rd party outside vbios that changes the limit of use NT 250 watts up to 275 watts of power.
It is the only change from the original version.
Flashing your Vbios may void the warranty on your video card
Another thing to check is the voltage drop as possible on the 12VDC feeding the card.
Some people have experienced this problem and it causes the same symptoms.
This was not the case in my system, but it's one thing to check before resorting to some flashes of the vbios.
If you are planning on flashing the Vbios from your video card, be sure to save a copy of the original Vbios in case you need to restore the map to the stock.
-
ASA 5510 using only the GB interfaces
I am looking for should I use a 5510 to activate two interfaces for VPN connections broadband from only a few sites. Our 5505 s (I have dozens) can not manage speeds of more than 100 MB and I have now a few FIOS beyond that--150 to 300mpbs. I want a 5510 basis who needs to manage a few voice / data sites and just use two interfaces. A basic 5510 allow 2 gigabytes or just ports FE interfaces? I have to be able to use 2 GB interfaces and no one else. I don't know that the 5510 will probably support the same QOS settings that I use on the 5505 s... I just need more speed interface so that I'm not bottlenecking data (I know I could use several 5505 s and extend the charges but is not how I want to do it for other reasons). Thank you
Hello
To my knowledge the ASA5510 supports 2 x 1 Gbps interfaces when you the Security license for the SAA. The basic license counts 100Mbps interfaces.
Take a look at this document for more information on licensing above
http://www.Cisco.com/en/us/docs/security/ASA/asa82/license/license82.html#wp190732
Its a document from the 8.2 version but its still even to 9.x on the license requirement more security get the 2 x 1 Gbps interfaces
The documentation for ASA5500 series promises an 300Mbps for the ASA5510 model flow, but I guess that's a value of location. In the most recent document, two values of max flow max and Multiprotocol are given.
Here's a link to the document
-Jouni
-
The use of the graphics processor
Hi there, I hope you can help with this problem: during display table for the use of the cpu and the bottom shows it red when he goes on his use of 20%. What it means?
There is an option to break the graph of CPU usage in two sections; time in kernel and user mode time mode. Many devices drivers and the essential elements of the operating system running in the kernel, so that the user-mode run in user mode. This option can be enabled by selecting the kernel schedules on the view menu. When this option is enabled on the chart to use CPU will show one green and one red zone. The red area is the amount of time spent in kernel mode, and the green area indicates the amount of time spent in user mode.
Read also:
Difference between the red and green CPU usage
http://www.ehow.com/info_8567865_difference-red-green-CPU-usage.html -
an SP boots to the graphical interface of the BIOS?
I just created and associated with a B200M3 a new SP.
When I check the boot via the vConsole server, I see that the B200 to BIOS switch "graphical user interface". If I try to go to bios, the B200M3 back to the... short bios switch, I can't exit the bios GUI intercace.
I do not configure any policy BIOS (default = so)
The B200M3 is less local disk; the SP should start on SANAll ideas are welcome
BR
Hi Delahais,
In the service profile, that you assigned to a policy of boot order? If you do not have a boot with CD/DVD order and store local or remote blade will always go to the BIOS screen.
Also not confirmed what the association has been completed to 100%?
-
Hey guys...
Hoping that someone else noticed this. I have a host that is running with a release of U4 freshly updated three virtual machines running. One of the three shows a CPU usage abnormal on customer VIM graphics, but when I'm sitting inside the virtual machine, the CPU usage is normal 3-10% with a bit high spikes every now and than. If anyone else has noticed something weird like that? I restarted the VM and the host and its always show this. VMware Tools are updated etc. His host W2K with 2vCPU and 3 GB of ram.
Thank you!
Each unique Windows 2000 multi proc machine I P2V would had this problem. No exception. The strange thing is that Windows 2000 VM built from scratch are very good. Change the HAL to single proc will correct the problem, but if you really need and processors multiple (as we do) then the only option I found is to play with the advanced VM option 'monitor.idleLoopSpinUS '. A value of 2000 is a good compromise for us.
-
The interface of Firefox is zoomed out/low resolution. This affects all parts of the browser (buttons, tablets, bars, etc.) and the web pages viewed.
I tried to start safe mode and then reset Firefox; neither fixed the problem.
Note that my display settings are correct, as Firefox seems to be the only application affected.
refer to
- https://support.Mozilla.org/en-us/questions/959696
- https://support.Mozilla.org/en-us/questions/963035
- https://support.Mozilla.org/en-us/questions/963027
- https://support.Mozilla.org/en-us/questions/963010
- https://support.Mozilla.org/en-us/questions/962979
- https://support.Mozilla.org/en-us/questions/962990
- https://support.Mozilla.org/en-us/questions/963001
- https://Bugzilla.Mozilla.org/show_bug.cgi?id=844604
-
Arduino restarts my PC when it is used for the serial interface
Hello
I use the example of continuous series read/write and other simple programs to read data from the Arduino board, but I am facing a problem that my PC restarts wih blue screen when you read data from Arduino for 5 minutes.
I don't know the reason and tried various solutions, including adding the number of bytes to Serial Port to connect with the VI series of reading.
Kindly guide me what could be the possible reason for this problem.
Concerning
I had this problem too - my PC would crash on average about once a day when connecting an Arduino data.
Someone on these forums proposed defining the synchronous and not asynchronous read VISA. Right-click in the VISA reading and select ' E/s synchronous Mode' > 'synchronous '.
I tried this and it seems to have worked - I have not had a crash for about a month now. I have no idea why it would make a difference, but it seems.
-
Is there a way to change the management IP in the graphical interface of ACS
Hello
I'm changing the IP management 5.2 ACS in the GUI, but could not find it.
Is it possible to change the IP address in the ACS GUI?
Thank you
-Alejin
Hello Alejin,
You can't change the IP address in the GUI. GBA is an application that move on a device. You must change the IP address to the device level, ssh to your device and connection.
then configure terminal
0 gigabit interface
IP [ip address] [your netmask]
output
output
write memory
concerning
Alex
-
In Robohelp 9, how to restore the default layout of the graphical interface
Hello
HR 9 I closed and rearranged some pods / windows (not sure of correct terminology yet). Ideally, I would like to return to their default position. Can someone tell me please how to do this?
Thank you
GailHello
Unfortunately, is no longer in a menu.
Take a look at the image below and it should be clear.
See you soon... Rick
Useful and practical links
Wish to RoboHelp form/Bug report form
Begin to learn RoboHelp HTML 7, 8 or 9 in the day!
-
File names containing a bookmark and information of the graphical interface of Firefox
Due to an error on my hard drive I had to pass on a copy of Windows on a different partition. I can access the partition that contains the original copy of Windows. There are files that contain information of bookmark and GUI of Firefox configuration information I can copy in my new installation of Firefox on the new partition for the new facility will be personalized as the old?
The user data is stored in the profile folder, the following article shows how to retrieve the data - recovery of data from an old profile
For more information about the files and folders in the profile folder, see http://kb.mozillazine.org/Profile_folder_-_Firefox
-
What to use for the PNG - 24 format because we have no Microsoft Digital Image!
Adobe has its own version of the open source transparency PNG called PSD. Haughty! For sure, this is why Adobe is so special. But what most of us who use and share the PNG Alpha standard? Microsoft has been more favourable standards when it marketed Microsoft Digital Image® with remarkable support for the standard PNG-24 or PNG Alpha format. But now Microsoft has left our market go to * in a handbag, dropping support for Microsoft Digital Image.
Refusing even to advertise a new program to manipulate and develop better, more professional in our world image format!
Really too bad. Really terribly sad. We remember all that weird menu 20-40 clicks in blind abominations of Adobe, took just a few clicks, accompanied by beautiful visuals colored across Microsoft Digital Image Pro.
We are crying and sobbing and screaming in anguish, Microsoft! Please come home! Where are you, genius?
Hi Mark,
A couple of options...
I suggest you do a Bing search engine for third-party software program to fit your needs. (remember to watch where/what you download from third party sites)
Can also may want to check with the forums dedicated to this type of software, and not here in answers.
My last suggestion is to speak with the real Microsoft Tech support to ask these questions. Remember that the only employees of MS here are those with a Big Blue Microsoft tag under their name. The majority of the members of the community here is not used from Ms.
Support options for MS
http://support.Microsoft.com/common/international.aspx?RDPATH=DM;en-us; Select & Target = support
I hope that these help options,
B Eddie
Maybe you are looking for
-
iOS 10 no longer allows you to choose to send SMS
Hi, I have upgraded to iOS 10 and I don't have the option key on an iMessage that invites the option to send SMS. I regularly use this function when I travel or am in areas without large internet service. I know I can disable iMessage but which is ra
-
I don't want to sync my themes but everything else - how?
I don't want to sync my themes but everything else - how?
-
Hello Unfortunately, recently my laptop was stolen from me Satellite A200 PSAECE and I know exactly where in this toshiba forum I should ask the question, but I hope that it is the only one. The laptop had windows vista license Home premium on it (on
-
Windows fail KB 2596856 update, error 0 x 80070670
This failure appears automatically when updating
-
How can I get rid of the returns in my text?
I'm a writer. I put a lot of text on my word processor. While writing, I pressed the wrong .key and he did all the hard return symbols appear. I know are a very simple process to remove them, but I don't remember the sequence of what to do. Anyone ca