Thin Client HP T510 printer questions

Similar Questions

• Thin Client t510 - printer redirect on windows server 2003

  Hi all

  just bought 4 T510 Flexible thin client. I have attached USB printer (Brother HL-2040 or a Brother HL-2130), but it does not redirect on the RDP session.

  I tried everything, to my knowledge, but without success. In the options of the Windows driver, I wrote EXACTLY the side server name of the printer (which is actually the same name identified by the customer).

  I noticed in the information system that the RDP version is rdp is 1.6.0 - 1.45...

  I thank in advance.

  I have the same problem but I managed to solve.
  I bought 10 of these T510 terminals, but with the same result on 3 different Windows Server 2008 R2 Terminal different (updated to the latest patch).
  Only one of these terminals sold the year before worked and so I checked the version of the software.
  By installing the old version of the terminals intelligent Zero Client the new T510 work with my printer in the Terminal Server session.
  New version does not work!

  I tried everything... this add features such as storage of the password, the support for the speed, etc... etc..., but the printer no longer works!
  I think that the change in the Protocol version RPD to give me problems.
  Now I have one here in the office with which I am trying to understand if I can solve the problem with the latest versions of the software that I could use.
  We install the Smart Core zero Image Z6X41019 Rev 1 (March 7, 2012) and it should work.
  PS, You must put the printer in T510 in the driver entry not working also the exact name of the driver that you see in Windows.

• Thin Client T510: Do not support the SMB for no image preload on Linux platform

  Hello world

  I have a problem with a Thin Client T510 (C4G87AT #ABA), this one came with Windows CE and today I flashed with a USB to thin Pro 5 (T6X52011). When I want to deploy the image I captured (wallpaper, RD Session etc...) I have the following error:

  2015-08-19 15:30:43 [error details]:... /... / Task/linux/ImageTask_Thinpro.cpp@384: Metheod of the Image is not compatible.
  .. /.. / Task/linux/ImageTask_Thinpro.cpp@1624: do not support SMB for no image preload on Linux platform.

  When I look in the console HPDM, I see the T510 and connected

  Agent version: 4.6.3670.21244

  HDPM 4.6 SP5

  OS: T6X52011

  My OS: Windows 8.1 x 64

  Can someone help me please? Thks and have a nice day.

  Hi, thks for this Council. Theres is how I fix.

  Firstly, the master repository has change from D:\HPDM\HDPM to D:\HPDM on the server, so the configuration was not good at the moment. Another thing, the password of the user hpdm has changed in Active Directory, but not in the configuration. I changed all the settings for in line with the current configuration and capture Images of thinpro news works very well and deploy this new works pictures well too but Deplopyement of old images does not work.

  I'll open another thread if I need assistance. In this case, I'll mark as fixed.

• Central Administration of the thin client

  Hello

  I work in a company where we have several customers light t510 hp

  I/we would like to know if it is possible to administer all thin clients from a server at a time. So, we will not have to manually administer each customer, one at a time.

  I hope that the question is clear to understand, I'm sorry for my English

  -Nick

  The PCs you're talking about occurred the company.

  You'd be much better servbed to join the support of HP Business Enterprise forum and validating the problem here.

• Thin client HP t520: thin client HP t520 occultation

  Recently, we purchased a few t520 Thin Clients and cannot be shadown using 4.6 SP4 HPDM.  We shadown t510, 5730 and 5740 devices regularly.  With devices t520, the task starts, send, process, and ends, but never opens the shadow session.

  Good news - I got it working.

  Devices t520 necessary an update of the Agent.  Once the Agent has been updated, and VNC enabled - I could also shadown.

  Thanks for your help!

• Shado task does not connect to the Thin Client

  Trying to hide a T520 on HPDM 4.6SP4 thin client, when I run the task of shadow, I retrieve a VNC connection on the server HPDM and not the thin client. T520 thin clients are ThinPro 5. This happens on the T510 Smart thin clients zero Core as well. I'm guessing there's a conf file that may have a value defined by mistake, but didn't find it.

  Dear customer,

  Welcome and thanks for posting your query on the Forum from the HP Support

  Looks like you are facing difficulties regarding the task of the shadow copy in the HP Device Manager

  1 shadow task uses the built in VNC server for the HP Device Manager software

  2. If you have installed a separate VNC software on the server of HPDM, there could be a conflict

  3. also please check under "services.msc" to find out how many services VNC running concurrently

  4. If you find that several services VNC please disable those who is not necessary

  5. Please goto Add / Remove programs and uninstall VNC Viewer is installed separately

  Hope this helps, for other queries in response to the post and feel free to join us again
   
  * Click on the button white Thumbs Up on the right of say thank you *.
  Make it easier for others to find solutions by checking a response "accept as Solution" if it solves your problem.
   
  Thank you
  K N R K
  Although I am an employee of HP, I speak for myself and not for HP

• Thin Client T5550: Central management program

  Operating system: Microsoft Windows CE 6.0

  Hello everyone. A few days ago, I asked a question on the HP Device Manager and the answer I got was that HPDM can't stand Windows CE 6.0.

  And given that HP can't stand my thin client operating system, it is unnecessary for me to sit for hours to learn how to manage the HPDM.

  Question:

  Are there other programs for central management AS HPDM can I use to manage my thin clients of?

  Best regards

  Linus.

  In terms of Thin Client, HPDM is the single management tool published by HP.

  In your case, are all of your thin clients running with Windows CE? If so, you can use the old version of HPDM (4.4.3) who fully support this.

  If your thinclients are with different operating systems, it is best to contact the special support team.

• Thin client HP t610 thin WW: thin client

  Installed an update a few months ago, and everytime I turn on the thin client, he begins to initialize.  After that initial "starting Windows" screen it starts at the end of the update of Windows saying:

  'Stage 3 of 3 '.

  "Configure Windows update."

  '32% complete '.

  "Do not turn off your computer.

  If stays there for a few minutes, then it starts to close.  But it restarts the computer and is stuck in this loop, until I have turn off the workstation.

  NSMerrick, welcome to the forum.

  I think that you will get more responses to your question if you start a thread here.  They are the members who know the better your Thin Client.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• This computer can't connect to the remote computer. ONLY 2 people it out 200 users...? baffeled by WindowsXPe Thin Client RDP connection

  Here's the situation.  We have 2 TS servers running WIN2K3 and 200 users with Thin Clients.  We'll call it the first server A and b of a second.

  They normally connect to an IP address and they will be directed to the server A or B according to the load.

  However; users can still select the specific TS server, they want to connect to.

  If user 1 and user 2 cannot connect to Server B.  They get the error listed above in the title.  However the user 1 and 2 can connect to A server.  If they say:

  192.168.123.2 the two of them get

  192.168.123.3 the two of them cannot get.

  I deleted the user de.3 A profile and it still can't get.  I have checked no orphan key inHKEY_LOCAL_MACHINEMicrosoft\Windows NT\CurrentVersion\ProfileList

  I checked the settings in TSCC. MSC, I' checked worm Licensing by user and they are good, I gave them full administrator privileges and still not pass via the serveur.3, they adhere to all groups within the ORGANIZATIONAL unit that they can connect to TS, they were able to connect to her very well this back on Wednesday.  It is not a firewall issue and port 3389 has been verified in the case otherwise he would not just these two on each CT they try.

  Again, they can get utilisant.2.

  In the event de.3 Viewer I can see users connected CORRECTLY but then it pop their right.  There is no other error message when connecting, just the success Message in the security log.

  Let's bounce servers tonight so I'll have to turn it back on and I pray that they can later log on this server, but I'm baffeled.  Why only 2 people would receive this question and most (not sure how many others there may be, but I know 30 people connected today on this server and worked out of it) people are not getting an error.

  The thin client on their desktop is not the issue, because the error follows them any CLIENT LÉGER, they are connecting from.

  Short of this re-boot and short to delete accounts and recreate them, ideas?

  Found the problem.  I did not remove the key to all the indicated previously.  I should have done that for this user since her CentralProfile Key was empty when she had to be filled in by the system.  Removed his Key specific SID for listed above point and viola.  User can connect.

• Thin client based on Linux T610

  Bulletin Board Hello!

  Just a few questions here I can't find via Google, manual and read other messages of the forum...

  We are trying to use a t610 with the Linux-based operating system and are facing obstacles, a little...

  I saw on the thin clients based on "Windows", after making a change to something, you have to 'Commit' changes...

  Is it possible to do it on a Linux machine? It seems that the operating system partition is read-only?

  Also, is it possible to navigate through the files and folders of this type of thin client?

  I see the terminal in "Administrator" mode and I can't type-nav files and folders through the text editor, but I am a semi-perte to do things this way...

  I know it of maybe a stupid question, but is there a way to recreate the image on this thin client to an OS based on "Windows"?

  The main problem I encounter is an add-on/extension in firefox is not 'stick' in my firefox browser...

  I installed the extension again and after I restart the browser, he is gone and my settings are back to "original"...

  I take a guess here, but I guess whenever this customer "reboots" the start of an image?

  One last question, is there of the "manuals" for those customers based on Linux?

  I see most or all aid seems to aim at Windows and would like to just a reference...

  Thanks for reading!

  Brandon

  If you're talking about the HP ThinPro OS-

  Before you can make changes to the file system, you must run this command from the terminal - "fsunlock". When you are finished, 'fslock' locks the system files again. There isn't another tool file explore included I know in ThinPro. Command line and the Notepad tool are the only real ways to navigate through the file system. If you need help with something, don't forget, it's basically a lighter version of Ubuntu, with a few extra utilities and GUI provided by HP. The nuts and bolts are identical to a version of Ubuntu, so I took a bit of insight of Ubuntu forums online for the problems I've had.

  Regarding your problem of browser extensions, depending on how you do this, you can configure connections to allow them to configure their own settings, or use HP ThinPro settings. If you've not allowed Firefox to create and use its own settings in the file system, nothing don't you change inside the browser will stick. I have not tried to install a browser extension, but I'm sure that this is your problem.

• Thin Client PC with Windows Embedded Standard 7/8 requirements?

  Dear support,

  Could you help us do I need a VDA or SA if we use

  Thin client, PC with Windows Embedded Standard 7/8?

  Thank you.

  Hello

  I suggest you to post the question on the TechNet Support link below. It is the team dedicated to the issue that you are facing.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking&filter=AllTypes&sort=lastpostdesc

  Do not hesitate to write us if you have problems with Windows

• Use of thin client Sun Ray 3i with view 5

  Hello

  everything is almost in the title, after wipe UN "I'm sorry for that but I can't answer your question" with the support of SUN/ORACLE I turn to you.

  
  

  I pay project to use these beautiful thin client with view 5, I'd like to, so just know if someone knows how to deal with these beasts the. Because it is there not Windows os type or other embedded.

  I thought that it was doable, but comment on...

  
  

  Anyway thanks in advance!

  Hi Padua,

  I just threw a glance to discover compatibility matrix. A priori the couple discovers 5.x and Sun Ray 3i is well supportati ( http://www.vmware.com/resources/compatibility/search.php?deviceCategory=vdm and you're looking for Oracle as the partner name).

  Then, you can find some info in the docs of Oracle (see Chapter 19):

  • http://docs.Oracle.com/CD/E25749_01/E25745/HTML/index.html

  Good luck!

  A +.

  Franck

• Zero Client vs. Thin Client

  I spent days trying to figure why my USB printers randomly stop working with my Zero Client/Linked Clones. I support the case open with VMware and Teradici. Anyway, as I continue to troubleshoot, I started to wonder, would I have the same problem if I was using a thin Client. It really makes me think, so I decided to make this post.

  I would ask you all, who is using zero Clients, that is using thin Clients (which models) and why?

  In my case, I'll settle for those using Zero Clients and Thin Clients that support PCoIP hear and I would like to exclude things like VDI Blaster and all types of jobs reallocated.

  I'm curious about the advantages/disadvantages of each.

  Thank you

  Mike

  I have two scripts VBS permanently running, one as an administrator and the other as the user.  The admin script periodically stop the spooler service deletes the spooler files (if they are old) and then restarts the service.  In our environment, all local USB printers are printers Dell.  The second script (which runs under the logged in user) periodically checks to make sure that the default printer is correct (ensuring that it's Dell). If a user moves from one client to another (where the default printer may need to be different), the script will change the default printer.

  If you are good with scripts, you should be able to adapt to your environment.  Otherwise PM me and I can help you.

  https://github.com/jftuga/VMware/tree/master/vmware_view_zero-client_printing

  -John

• flexible thin client T520: T520 Thin Client, how can I join a domain?

  I need to put my thin clients on the domain.

  Do not click no right, no "system" in the control panel... How to loosen things up I can do a basic administration?

  Not quite what I needed.

  I am logged on as administrator

  There is no 'System' icon in "All Control Panel items" to interact with.

  in the Explorer, 'Computer' is not right clickable, so there is no contextual menu from the drop-down list select 'properties '.

  NETDom is not a valid command of the high - command prompt = yes.

  Is what I found to work through experimentation;

  From a command prompt, type "explorer".

  This opens a window of the Explorer, which lists the 'C' and 'RAMDrive.

  (Just by clicking on the start menu, and the computer in the conventional way, shows that "RAMDrive").

  From there you can right click on "Computer" and put in place the familiar 'Control Panel>>System Control Panel items'

  "Then it's the usual"edit parameters"in working to change group settings" area.

• HPDM: HPDM can't see any of my thin clients

  A few months ago, I set up a server HPDM on Win 2012r2 and light HP 12, mainly mt245 clients. I could see all the thin clients with HPDM, I even used it for the Image of each of them.

  Yesterday, I went to add a new abd mt245 the image. All TCs went from HPDM and it does not find it again. I tried to walk to the beach. I tried to manually add as well as at the foot of the range of the exact IP that the TC has to say things. I ping the TC from the server and vice versa.

  The Windows Firewall is turned off completely.

  Any thoughts?

  Thank you

  Travis

  Well. I thought about it. I forgot to click on the name of the gateway on the left. Stupid sound is not automatically select one on its own.

  Travis