Thin client recommendation or Advisor

Similar Questions

• T610: thin client, multi-imaging platform

  Hi all

  IV ' e hoping to put this in the right place and someone can help or point me in the right direction.

  I'm looking for information on Thin Clients and Device Manager (HPDM), specifically on best practices on building and image capture, cross-platform and imaging would be advantageous.

  I am currently using HPDM Imaging for my thin clients t5470 and t5470e, t610, t620.

  I'm looking for a few docuemntation on recommended Configuration of HP for Imaging. is it to make a "gold" image or it can be pre-determined by HPDM like Microsofts SCCM or WDT?
  
  It would be fantastic if I could get it down to a single Image of WES7 for most of my Thin Clients if possible.

  Thanks in advance.
  J

  HPDM provides no functionality of creating an image, tt just do capture and deploy.

  The factory image include all drivers are built by HP R & D WES, there should be no one who can help you, but as far as I know there is no document to save the steps in detail. I suggest that you raise a ticket to impact to HP for help.

  MDT can not be used to deploy the image provided by HP. When building the image, no matter it is an original image or Thinupdate captured image, HP has done little customization in/after imaging process. I don't think that MDT can identify and carry out even these customizations.

• Windows xp works on VESA PC Thin Client eBox-2300

  I need to know if its possible will work windows xp on VESA PC Thin Client eBox-2300
  Here are the specs
  processor == Vortex86 SoC (System on Chip)
  main memory is 128 MB of SDRAM
  It uses a card compact flash for a hard drive thinking about upgrading to 2 giga
  Windows xp runs by chance on it?
  Thank you

  Hello

  It does not support the full version of Windows XP. According to the manual, you can install Windows XP embedded, but you will need to contact the manufacturer for assistance on this.

  For help I recommend that you report this problem in Windows Embedded Standard.
  http://social.msdn.Microsoft.com/forums/en-us/category/EmbeddedWindows

• How to find the properties of thin client, PC?

  Original title: Thin Client

  Hello

  How to find the properties of Thin Client, PC.

  When I check the properties of my computer it shows properties of a server

  and also I check with cmd Systeminfo it shows also the connected server properties

  Hi Yogi,

  Thanks for posting your query in Microsoft Community.

  According to the description of the issue, I recommend you post your query in the TechNet Forums. TechNet is watched by other computing professionals who would be more likely to help you.

  TechNet Forum

  Hope this information is useful.

• Thin client SSL VPN (WebVPN) on SAA

  I try to config Thin - Client SSL VPN (WebVPN) on the command-line use ASA and ASDM

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a008072462a.shtml

  the link applies to ASDM 5.2 and ASA 7.2

  I want to config with ASDM 6.3 and ASA 8.2.

  I try the command line and I can not find command: port-forward

   port-forward portforward 3044 10.2.2.2 telnet Telnet to R1
  
  Do you know how to do with this command ?
  
  I dont find much info about thin-client ssl vpn.
  
  thanks
  
  Duyen

  Hi Alex,

  It can be configured by going to Setup > remote access VPN > clientless SSL VPN access > political group and change your WebVPN users group strategy, as you can see:

  

  If I can give you an opinion on it, I would recommend using smart-tunnel-port forwarding because it is getting out of date and you will be able to get the same results with chip-tunnels.

  More information on smart-tunnels:

  http://www.Cisco.com/en/us/docs/security/ASA/asa82/configuration/guide/WebVPN.html#wp1218044

  Kind regards

  Nicolas

• Thin client for virtual desktop

  This Thin Client would agree to operate the virtual office?

  HP GY227AT; Thin client HP Compaq t5730 - Tower - 1 x Sempron 2100 + / 1 GHz - RAM 1 GB - no HDD - Radeon X 1250 - Gigabit Ethernet - Win XP Embedded

  What is the minimum/recommended specification for a thin Client Solution typical?

  Rgds,

  Jamie

  Welcome to the Forums - if you are referring you can use this Thin Client with VMware View, the answer is Yes according to the compatibility guide - http://www.vmware.com/resources/compatibility/search.php?action=base&deviceCategory=vdm

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• flexible thin client T520: T520 Thin Client, how can I join a domain?

  I need to put my thin clients on the domain.

  Do not click no right, no "system" in the control panel... How to loosen things up I can do a basic administration?

  Not quite what I needed.

  I am logged on as administrator

  There is no 'System' icon in "All Control Panel items" to interact with.

  in the Explorer, 'Computer' is not right clickable, so there is no contextual menu from the drop-down list select 'properties '.

  NETDom is not a valid command of the high - command prompt = yes.

  Is what I found to work through experimentation;

  From a command prompt, type "explorer".

  This opens a window of the Explorer, which lists the 'C' and 'RAMDrive.

  (Just by clicking on the start menu, and the computer in the conventional way, shows that "RAMDrive").

  From there you can right click on "Computer" and put in place the familiar 'Control Panel>>System Control Panel items'

  "Then it's the usual"edit parameters"in working to change group settings" area.

• HPDM: HPDM can't see any of my thin clients

  A few months ago, I set up a server HPDM on Win 2012r2 and light HP 12, mainly mt245 clients. I could see all the thin clients with HPDM, I even used it for the Image of each of them.

  Yesterday, I went to add a new abd mt245 the image. All TCs went from HPDM and it does not find it again. I tried to walk to the beach. I tried to manually add as well as at the foot of the range of the exact IP that the TC has to say things. I ping the TC from the server and vice versa.

  The Windows Firewall is turned off completely.

  Any thoughts?

  Thank you

  Travis

  Well. I thought about it. I forgot to click on the name of the gateway on the left. Stupid sound is not automatically select one on its own.

  Travis

• Thin Client T5000 series password reset

  Hello, I bought a few days there are some thin clients to someone.

  These has always his password to get into the bios.

  All thins are T5000 series.

  Dous anyone know how to remove this password? / or clear all default settings?

  -J' looked for a reset jumper, but did not. One jumper is near the audio output, but I guess that's not what I'm looking for.

  -removed battery CMOS for a few minutes, did not help (maybe I should consider longer?)

  Thanks in advance,

  Drosaert S.

  Thanks Hanspuppa, that worked.

  Suddenly, I realized that, as you say, some capacitors may still have some fees top just after their closure.

  So I left the Jules Destrooper unplugged for a whole night, and after that I removed the CMOS battary for 1 hour. That's all.

  Thanks for your help...

• Thin client HP t520: thin client HP t520 occultation

  Recently, we purchased a few t520 Thin Clients and cannot be shadown using 4.6 SP4 HPDM.  We shadown t510, 5730 and 5740 devices regularly.  With devices t520, the task starts, send, process, and ends, but never opens the shadow session.

  Good news - I got it working.

  Devices t520 necessary an update of the Agent.  Once the Agent has been updated, and VNC enabled - I could also shadown.

  Thanks for your help!

• Thin client HP 420: thin client usb problem

  We test a workstation 420 and everything seems to work fine except when you are connected to an RDP session to our server 2012R2 farm, usb storage disks/keys are not recognized.

  Everything seems to be ok on the thin client in local resources and the USB is recognized when a usb diagnosed.

  Other usb devices are thin dongles, wireless, keyboard / mouse, etc.

  Any thoughts on how to get them recognized in windows Explorer

  So nobody here knows something about thin client HP configurations

  Spoiler (Highlight to read)

• HP t620 Flexible Thin Client: Windows 10 IoT Ent. Client light-load Multi Touch

  Customers light t620 (Std/MORE) running 'Windows 10 IoT Enterprise for Thin Clients' supported multi touch? Or alone only?

  Having a hard time finding a definitive answer online.

  Thank you

  The answer is Yes.

  See Page 5... http://WWW8.HP.com/h20195/v2/GetPDF.aspx/c04312126.PDF

  "Smooth, immersive experience with technologies like advanced multi-touch and Windows® 10 applications"

  -Keith

• Thin Client T520: Hp Thin Client Test without account 'user '.

  Hello

  My problem is that I created a new account user without administrative privileges for a long time and yesterday, I deleted the user account original (I still have the administrator and the new), but the customer never resumed. I can see the mouse, but it does not start.

  I have the Lightweight Client T520 with Windows 8.

  According to the message that you have posted, I wish to confirm that the operating system could be damaged and need to re - install the operating system on the workstation again to make it work

  This Thin Client device comes with various types of operating system by default, as shown below:

  

  Here is the link to this page: http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=6875922 & lang = to & cc = us

  I don't see Windows 8 (32 bit) operating system on the HP Support Site's list

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

• 4.7 HP Device Manager: HPDM finding Thin Clients

  I'm trying to implement HP Device Manager 4.7 on a newly configured Windows 2012 R2 server.

  I am replacing a Server 2008 R2, where HP Device Manager works perfectly on our network.  In fact, if I uninstall HPDM on the new server and reinstall it on Server 2008 R2 I can always access all thin clients.

  The only difference I see in the facilities which is for some reason any gateway in HPDM is not a subnet mask.  Research of the device are not lacking, they don't sell anything or simply continue indefinitely until I have Cancel.

  Any help would be great.  Thanks in advance.

  Just to confirm: you did turn with HPDM 4.7 on Server 2008 R2 successfully, but not the right to 2012 R2 server?

  Is your Windows 2012 R2 server with more than 1 NIC card? Could you please assign a specific NIC loca in the Gateway Configuration window and see if that fixes the problem?

  Otherwise the logging level value please DEBUG and post the gateway.log when start HPDM Gateway

• Shado task does not connect to the Thin Client

  Trying to hide a T520 on HPDM 4.6SP4 thin client, when I run the task of shadow, I retrieve a VNC connection on the server HPDM and not the thin client. T520 thin clients are ThinPro 5. This happens on the T510 Smart thin clients zero Core as well. I'm guessing there's a conf file that may have a value defined by mistake, but didn't find it.

  Dear customer,

  Welcome and thanks for posting your query on the Forum from the HP Support

  Looks like you are facing difficulties regarding the task of the shadow copy in the HP Device Manager

  1 shadow task uses the built in VNC server for the HP Device Manager software

  2. If you have installed a separate VNC software on the server of HPDM, there could be a conflict

  3. also please check under "services.msc" to find out how many services VNC running concurrently

  4. If you find that several services VNC please disable those who is not necessary

  5. Please goto Add / Remove programs and uninstall VNC Viewer is installed separately

  Hope this helps, for other queries in response to the post and feel free to join us again
   
  * Click on the button white Thumbs Up on the right of say thank you *.
  Make it easier for others to find solutions by checking a response "accept as Solution" if it solves your problem.
   
  Thank you
  K N R K
  Although I am an employee of HP, I speak for myself and not for HP