ThinApp Acrobat DC AcroCEF.exe problem

Similar Questions

• SE error message "Acrobat has encountered a problem and needs to close" when you use Acrobat Reader

  Original title: golfer188

  When I try to load or use Acrobat Reader, I get a message that Acrobat has encountered a problem and needs to close.   The problem seems to be related to the fix to windows installation I get a message asking if the patch installation is correct or who are permitted.   If I try to remove Acrobat Reader I get the same message and deletion does not continue.   If I try to download a new Acrobat Reader installation stops with a message that Acrobat Reader is already installed.   What should do?

  Try this program because it is very good at removing stubborn programs.
  http://www.revouninstaller.com/

  Then, you can try and reinstall the player or use another that people like.

  http://www.foxitsoftware.com/PDF/reader/Reader3.php

  I hope this helps.

• I have the Windows cannot find C:\WINDOWS\system32\rundll32.exe problem and I do not have my disk

  I have the Windows cannot find C:\WINDOWS\system32\rundll32.exe problem and I do not have my disk

  Hello

  • When you receive this error message?
  • What were the changes made before the issue started?

  Try the SFC scan on the computer.

  SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.

  Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC/scannow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.

  Reference:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• I have the ie3sh.exe problem on my laptop, can you tell me what I have to do and this causes a problem with LAN for internet

  I have the ie3sh.exe problem on my laptop, can you tell me what I need to do, and this causes a problem with LAN to the internet.  What happens on another laptop not this one.

  Hello

  ·        Which is exactly the problem that you face with iesh3.exe?

  ·        When you receive the error message that is related to iesh3.exe?

  ·        You did changes to the computer before the show?

  ·        This issue you are facing with internet?

  ·        What is the full error message that you receive?

  Method 1: I suggest you to run the Microsoft safety scanner to ensure that the system is free of infection by the virus:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Method 2:  I would say as you put the computer to boot and check which application is causing the problem:

  http://support.Microsoft.com/kb/929135

  Note: after a repair, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Post back with the required information so that we can help you further.

• I have install AdobeProDC yesterday and now I can't convert my email in pdf format.  I have the following message: Acrobat PDFMaker has detected problems in the installation.  Please repair/reinstall Acrobat.   How can I fix this?

  I installed Adobe Pro DC yesterday and now I can't convert my email in pdf format.

  I have the following message: Acrobat PDFMaker has detected problems in the installation.  Please repair/reinstall Acrobat.   How can I fix this?

  Try to remove Acrobat DC with the tool from here: Download Adobe Reader and Acrobat cleaning - Adobe Labs tool , restart the computer and reinstall Acrobat Pro DC.

• Adobe Acrobat has encountered a problem and needs to close.

  Just recently when I run the application Acrobat X after about 10 seconds I get this error, "Adobe Acrobat has encountered a problem and needs to close.  " We are sorry for the inconvenience."  I can create PDF files and open PDF files for 10 seconds.  I did a repair of Acrobat, I tried a new user account, and I'm disbled all I left a number of questions.  I still get the same error I have no idea what to do.  Any suggestions?

  J.R.
  

  You gave me an idea.  I removed the Adobe PDF printer, then repaired Acrobat... now everything is fine.  Thanks Will!

  J.R.

• In acrobat Pro DC installation problem

  This is the error when I installed acrobat pro DC. Please let me know how I can install it

  Exit code: 7 please see specific errors below for troubleshooting. For example,.

  ERROR: --------------------------------------

  Summary -------------------------------------- -

  fatal error 0, 1 error (s)

  -Payload: Adobe Acrobat 15.8.20082.0 Adobe Acrobat\Setup.exe_15.008.20082 DC

  -ERROR:

  Third Adobe Acrobat\Setup.exe payload Installer failed with exit code: 1603

  Hi neegams86146922,

  Please see this KB document in order to get this issue resolved Re: exit code 7 and error 1603 when trying to install acrobat pro DC..

  Let me know if you are still having a problem.

  Kind regards

  Nicos

• TFncKy.exe problem after upgrade to XP SP3 on Satellite A200

  Hello

  After upgrade of XP SP3, I have problem with TFncky.

  _System_:
  A200/PSAE7
  -XP Pro (2 x with OS selector, 1 OS XP XP main, 2nd XP for games)

  _Problem_:
  After booting XP from my main XP installation I always get an error message pop up stating that there is no prob with TFncKy and TFncKy should be stopped. As "signature of the problem" I get the following:

  + AppName: tfncky.exe AppVer: 3.22.0.0 ModName: ntdll.dll +.
  + ModVer: 5.1.2600.5512 Offset: 00012ace +.

  With one of the following keys on keyboard always results in above described error pop up but key are functional:
  WinLogo, DEL, HOME, PGUP /-DN, END, right SHIFT, FN + keys F etc.

  My second installation of XP (Lite for games) short smooth after SP3 upgrade: no error TFncKy error message.

  As my second XP runs without any problems after SP3 I'm not sure if the proplem is related with + tfncky.exe + or + ntdll.dll +.

  BTW:
  What driver package includes "tfncky.exe? Toshiba controls?

  Thanks in advance for any information or advice for this problem!

  Best regards
  Andreas

  Hello

  the problem was already discussed in another thread: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=18082

  The last message was probably the solution for the whole of the case. The mentioned user that "TfncKy.exe" belongs to the Toshiba Hotkey utility that only needs to be removed and reinstalled for this problem.

  In addition, it would be wise to check the registry with CCleaner for example before you reinstall the Hotkey utility.

  See you soon

• Building exe problem

  When you try to build an .exe, I got the following error...

  Error 6a held at AB_Source_VI.lvclass:Close_Reference.vi-> AB_Build.lvclass:Copy_Files.vi-> AB_Application.lvclass:Copy_Files.vi-> AB_EXE.lvclass:Copy_Files.vi-> AB_Build.lvclass:Build.vi-> AB_Application.lvclass:Build.vi-> AB_EXE.lvclass:Build.vi-> AB_Engine_Build.vi-> AB_Build_Invoke.vi-> AB_Build_Invoke.vi.ProxyCaller

  Possible reasons:

  LabVIEW: File generic i/o error.
  =========================
  NOR-488: IO abandoned operation.

  Have no idea why... the vi works perfectly, but cannot generate the .exe.

  Help, please.

  I used the LabVIEW 8.x. (build Advanced Menu) file structure

  Problem sovled.

• I got a Message from SeqEdit.exe problem when it is inserted expression, is this a bug?

  I have tried to insert a phrase in the browser of the Expression to evaluate limits, but whenever I chose "insert" he displied a problem SeqEdit.exe post and quited TS.

  The problem was always with the same phrase. There are 3 seals files to show the problem. Is this a bug or I do something wrong?

  I'll appreciate your help.

  H.P.

  Here's a quick solution to be able to use the browser of the Expression to insert functions. (Once you add the CheckLimits() function to remove the final closing ')'. Fill the rest of the function with the expected arguments 4 and then add a closing ')'.

  This is the prototype of CheckLimits

  CheckLimits (number value, number, low number, String comparisionType, Boolean, optional doNotCopyToResults = TRUE)

  Kind regards

  Steven Zittrower

  Technical sales engineer

  National Instruments

  http://www.NI.com/support

• error code 1 occurs with the construction of the .exe (problem VI) attached

  The problem that I have been with a particular project was published several times by others.  I read through many threads related to this (or rather related to it).  I tried some things but not all.  I finally started turning off sections of my code to see if the error disappeared.  I have followed the attached VI.  The error code is also attached.  Can someone analyze this VI and see what might be the problem?  It uses .NET objects, so I don't know exactly what the compiler is looking for.  I would point out that this isn't my VI, but the one I copied from the forum here.  As far as the e-mail, the VI works very well in development mode, but obviously I desire a standalone application.

  Also note that I have created a new project and dropped this VI on the first level VI and he built a .exe very well, which makes no sense to me. Maybe someone can shed some light on this issue.  When I tried to return to the initial project, it doesn't have the build.  If you have disabled all instances of this VI in my project (using a diagram to disable), generates the project without an error.  Thanks in advance for your help.

  Reese

  Well, I found a solution, but I still don't know why the original VI would not build in my application.  I just created a new VI copied each code section of the original, little by little, build and then copy some more until all has been copied to.  It built without error every time.  It's a head scratcher, but the only thing I can think is, given the original VI was not my code, there may be a current compatibility issue.  But even once, he worked in a new project, so I'm not sure.  The lesson that I learned from this (and I know better), is not to wait until the end of your project in order to perform a build.  Lesson learned!

• What can I do to correct "RUNDLL32. EXE' problem?

  CANNOT ACCESS THE CONTROL PANEL. RUNDLL32. EXE' POPPING UP. WHAT SHOULD I DO?

  Hey Sissy,

  1 have you made changes to your computer recently?

  2. What is the operating system installed on your computer?

  I suggest you to follow the steps from the link and check if it helps.

  Method 1: Run check file system (CFS) analyses and checks to see if it helps.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Note: SFC system gives an administrator the ability to scan the files all protected to check their versions. If the System File Checker detects that a protected file has been replaced, it retrieves the correct version of the file in the folder cache (% Systemroot%\System32\Dllcache) or the Windows installation source files and then replaces the incorrect file. System File Checker verifies and repopulates the cache folder also. You must be logged in as an administrator or as a member of the Administrators group to run the System File Checker. If the cache folder is damaged or unusable, you can use the sfc/scannow, sfc /scanonceor sfc /scanboot orders to repair its contents.

  Method 2: Scan your computer anti-virus using the Microsoft Safety Scanner, then check if it helps.

  Microsoft safety scanner

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 3: If the problem persists, perform a system restore and check if that helps.

  System Restore For Windows 7

  System Restore for Windows Vista

• CheckSUR.exe - problem with Windows Update - 80073712.

  Hello, I'm apparently missing these 4 files since my last update, and I'm unable to download anything else. Already tried the fixes posted here, but nothing. I really don't want to reinstall Windows. :(

  =================================
  Preparation of control system was updated.
  Binary version 6.1.7600.20593
  Package, Version 7.0
  2010-03-04 13:53

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store
  (f) CSI Payload file missing 0x00000000 WatWeb.dll x86_microsoft-windows-s... ideologies - webcontrols_31bf3856ad364e35_7.1.7600.16395_none_39bc056e339474f4
  (f) CSI Payload file missing 0x00000000 WatWeb.dll amd64_microsoft-windows-s... ideologies - webcontrols_31bf3856ad364e35_7.1.7600.16395_none_95daa0f1ebf1e62a
  (f) CSI Payload file missing 0x00000000 WatAdminSvc.exe amd64_microsoft-windows-s... ivationtechnologies_31bf3856ad364e35_7.1.7600.16395_none_89cb1e5f7a64822b
  (f) CSI Payload file missing 0x00000000 WatUX.exe amd64_microsoft-windows-s... ivationtechnologies_31bf3856ad364e35_7.1.7600.16395_none_89cb1e5f7a64822b

  Summary:
  Seconds executed: 87
  Found 4 errors
  CSI Payload file lack Total count: 4

  Hello, I'm apparently missing these 4 files since my last update, and I'm unable to download anything else. Already tried the fixes posted here, but nothing. I really don't want to reinstall Windows. :(

  =================================
  Preparation of control system was updated.
  Binary version 6.1.7600.20593
  Package, Version 7.0
  2010-03-04 13:53

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store
  (f) CSI Payload file missing 0x00000000 WatWeb.dll x86_microsoft-windows-s... ideologies - webcontrols_31bf3856ad364e35_7.1.7600.16395_none_39bc056e339474f4
  (f) CSI Payload file missing 0x00000000 WatWeb.dll amd64_microsoft-windows-s... ideologies - webcontrols_31bf3856ad364e35_7.1.7600.16395_none_95daa0f1ebf1e62a
  (f) CSI Payload file missing 0x00000000 WatAdminSvc.exe amd64_microsoft-windows-s... ivationtechnologies_31bf3856ad364e35_7.1.7600.16395_none_89cb1e5f7a64822b
  (f) CSI Payload file missing 0x00000000 WatUX.exe amd64_microsoft-windows-s... ivationtechnologies_31bf3856ad364e35_7.1.7600.16395_none_89cb1e5f7a64822b

  Summary:
  Seconds executed: 87
  Found 4 errors
  CSI Payload file lack Total count: 4

  This is to update KB971033 for Windows 7 , correct? I highly doubt that the sfc/scannow can replace missing or corrupt content.

  ** You try to uninstall KB971033 or remove the files associated with it? **

  If no, then suggest that you click the link above for KB971033 and then click on the link for the version for your system architecture
  (32 or 64-bit), it's on the article.
  Save update, allow him NOT to run if they are presented with a choice .

  Then, Configure Windows 7 to clean the boot .
  When you have restarted the clean boot state, run that the manually downloaded copy KB971033 that comes to get, not the copy that has been downloaded automatically by Windows Update.
  If you are prompted to restart.
  Cancel the boot minimal steps now.

  Done the above solve the problem of update?
  If this isn't the case, please run CheckSUR once more and send the log again.

  MowGreen Services consumer safety update

• Last update of Windows XP and SVCHOST. EXE problems?

  Hello. My PC runs XP SP3 (HP Media Center) 3G of ram. It worked very well lately without any problem whatsoever. This morning I started as usual. I noticed the familiar Microsoft Update 'yellow shield' in the lower right of the task bar. I flew over the mouse over it and it read "download updates 0%. He never got above zero (or I couldn't open Update window). I pulled up the Manager tasks and SVCHOST. EXE has been hogging 99% of my CPU. I have everything closed and stopped and restarted. After the reboot (thinking it was a problem of Windows Update), I went on the Microsoft Windows Update site and clicked on 'Express' updates to try to update manually. He began cycling (search?) updates and soon SVCHOST. EXE, roared back to life and pegged the CPU at 99% of use (effectively maxing out the CPU at 100%). Page Update MS has never reached the point where it stated that I needed updates... He kept just cycling and research. Once the SVCHOST. EXE is happening (I tried this update 3 - 4 times today) it does not stop (if I close the window of Windows Update or not). I need to stop and restart. When I stopped, I see a prompt "end program" for RUNDLL. EXE that (when I try to 'end') translates into a prompt "unresponsive". I have to leave the program to close. As a precaution I've scanned with MSE, Malwarebytes, Spybot and SuperAntiSpyware and all were clean. No problem with MS Security Center is. I never saw my computer behaves like this before. At the time of this post, it seems fine except when I try to update on the Microsoft Site. Is there a bug or a problem with the last update?  Any thoughts appreciated. Thank you.

  Install KB2846071 for IE version 6: http://www.microsoft.com/en-us/download/details.aspx?id=39519
  Or update IE 8 version: http://www.microsoft.com/en-us/download/internet-explorer-8-details.aspx

  New info: the best way is to KB2870699.  He has the problem with high CPU.
  http://TechNet.Microsoft.com/en-us/security/bulletin/MS13-069

• Windows XP svchost.exe problems. Cannot find the latest updates for windows xp.

  Hello, this is my first time on the Microsoft Community page.

  I have a very strange problem with automatic updates svchost.exe and windows. I know that automatic update of windows, has been known to cause problems on XP and there is thus CPU utilization of memory leaks. Last night, I tried to install the latest windows XP updates, with automatic tool. The tool hanged during the process. Not sure why exactly. I never had a problem with it. I've been running Xp SP 3 for more than five years. In any case, I rebooted my system and checked to see if the updates actually treatment. They do not have. Then I went to the windowsupdate.microsoft site. I was trying to these updates. The scan never completed, he just constantly checked, for about 45 minutes. I decided to do some research. I found the C:\Windows\SoftwareDistribution folder "fix" online. He kicked, I renamed the file. And then disabled auto updates and restarted my computer. After windows starts, I re-activated automatic updates and waited. Nothing happened, so I did some research more. I noticed that svchost.exe uses about 25% the use of the processor. Normally my treated systemidle is 99%. I used Process explore and isolated the wuauclt.exe under the svchost.exe file. When I disable automatic updates executable, it is up to a full 99%.

  I'm not sure why it uses 25%, when I look at the actual use of the memory for the wuauclt.exe, it is only using about 17 k of memory. Which is quite low. I have not turned on microsoft update, starting in the configurations of parameters at windowsupdate. I know that in the past, that has been a problem and swallowed up system resources.

  Any advice would be helpful. Thank you in advance.

  There are a lot of threads on this forum - and many others - this problem - just try to do a Google search for UPDATES of XP SVCHOST - hits now more than 8 million.

  But to save you the trouble of tracking down the fix OK here is the short version

  1. disable automatic updates using Control Panel icon

  2. restart the computer - SVCHOST is now not going crazy

  3. check which version of Internet Explorer you have installed IE8, IE7 or IE6

  4. download and install - the links below - the good update for Internet Explorer.

  Assuming you have Windows XP 32 bits here are the direct download links:

  IE8: IE8-WindowsXP-KB2898785 - x 86 - ENU.exe
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=41404

  IE7: IE7-WindowsXP-KB2898785 - x 86 - ENU.exe
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=41442

  IE6: WindowsXP-KB2898785 - x 86 - ENU.exe
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=41458

  5. Once installed, you can reactivate the automatic updates and using Windows Update.

  Note: The bug also affects access via Windows/Microsoft Update Web site.

  KB2898785 is the "Cumulative Security Update for Internet Explorer" (December 10, 2013)

  There is a bug in the function of automatic update under XP running the SVCHOST process at full CPU load (100% or 50% or 25% depending on the number of CPU cores you have). If you have a Quad core CPU the bug works the CPU at 25% (a carrot out of four) and eventually battles through a conclusion - but if your computer is a single old Celeron or Pentium bug works the CPU chip at 100% load for many, many h/solid.

  Faster your processor and RAM than you seem to make a radical difference to the actual times are waiting for you maybe search for updates complete. Most of the old core systems were never designed to deal with this kind of situation and can easily overheat. This is especially true of laptops and desktop systems older where the radiator can be partially blocked with fluff and hairs of animals - which could cause blockages or stops!

  Microsoft said last month that the updates of Internet Explorer are treated differently from all the other updates - which is originally the XP update engine run so slowly as to appear frozen. If the update service finds that you don't have the latest version of IE that is currently available, it starts to search the entire tree of updates of IE to see what it takes - rather than offering just the cumulative current update for your system.

  But if you manually install the update yourself update Internet Explorer service is fully updated and is not search for updates of IE. But until Ms. fix it will still occur whenever a new update is published.

  MS said that intend to prune the IE updates database so that only the main cumulative updates have been offered when a search has been launched - it did not in time for the update as it should of November and obviously has not arrived or worked either in time for the December Update!

  MS say they hope to have a fix before the January updates are released (Patch Tuesday) - that the problem will be activated once the next update Cumulative of IE is released.