Last update of Windows XP and SVCHOST. EXE problems?

Similar Questions

• After the last updates of windows have problems with start up and now drivers

  Hello

  After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

  May 14, last night I had several (automatically) downloaded windows update

  Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

  Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

  Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

  Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

  Thank you

  Hi Jane,

  You have a disk to install Windows 7 with you?

  I suggest you to check the event viewer for error details report.

  Open event viewer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

• Explorer.exe and svchost.exe using too much memory

  I have disabled the automatic updates after the last round of updates, and now, all of a sudden, explorer.exe and svchost.exe use too much memory... enough to interfere with other programs, I try to use.

  Help?

  Windows XP Professional - Svc Pack 3 processor: Intel (r) Pentium (r) D CPU 2.80GHz CPU speed: 2.73 GHz memory: 512 MB

  Why you turn off automatic updates?

  There are between the two options. I just set it to notify. When it is practical, I go to the Microsoft Update slte and use the custom (not Express) option. This gives the user full control of the update of trial.

  You will have a better idea of the cause of the problem using Process Explorer.

  Download Process Explorer.
  For more information about Process Explorer, see here:
  http://www.Microsoft.com/technet/sysinternals/SystemInformation/ProcessExplorer.mspx

  With svchost.exe provide us a list of services using the process. There are number of processes that are using svchost.exe, so we need to know that we provide more targeted assistance. Right click on the process, click on properties and look at the Services tab.

  Solution Explorer. exe has a number of subprocesses. Select the sub-process, click Properties and check the Services tab.

  Have you recently changed all types of starting any service. This often leads to the problem. Users often disable a reflection of service to speed up the system performance. In practice what is done is of one or several programs to malfunction.

  Hope this helps, Gerry Cornell

  Hello

  I inadvertly solves the problem by changing my default from iTunes media player to Media Player.

  Hope this helps someone else!

  Thanks for the link to Process Explorer :)

  Windows XP Professional - Svc Pack 3 processor: Intel (r) Pentium (r) D CPU 2.80GHz CPU speed: 2.73 GHz memory: 512 MB

• Error number: 0x80072EFF; Fixes for Win32 and svchost.exe generic

  I'm trying to solve a problem of message and svchost.exe error Genereic Win32 and need to update windows but get an error number: 0x80072EFF, an inability to connect to the server/website updated.  I am running WinXP SP3 on a desktop computer that came pre-installed with Norton in 2005 but has fonctionnee McAfee for at least 3 years now. The firewall is through McAfee.

  Any help would be greatly appreciated.

  I am running WinXP SP3 on a desktop computer that came pre-installed with Norton in 2005 but has fonctionnee McAfee for at least 3 years now. The firewall is through McAfee.

  Assuming that the computer is not infected, the following should solve your problem from Windows Update:

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. download the tool McAfee Consumer Product Removal, save it to your desktop:http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. double-click on the file that you saved in # 1 a above, to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. now make this triple McAfee fix & restart: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  NB: You have already downloaded step 2 remove the fix tool in my # 1 step b above.

  5. now to reset Windows update by...

  How to reset the Windows Update components?
  [Access KB971058 via Internet Explorer only;] Run the difficulty in the default and aggressive modes]
  http://support.Microsoft.com/kb/971058

  6. restart once again & test.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• My computer will not install the last update of security mpam-fex64 [1] .exe. I have__Windows 7 Home premium X 64 based PC. Does anyone have any suggestions?

  My computer will not install the last update of security mpam-fex64 [1] .exe.  I have
  Windows 7 home premium, X 64 based PC.  Does anyone have any suggestions?  Windows gives me the message that the update failed.  I get the error 66 has code.

  Hello sajanclt,

  It is an update of the Forefront client. I suggest you post in the following Forefront Client Forum.
  http://social.technet.Microsoft.com/forums/en-us/category/forefront

  They will be better able to help you.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Last updated on Windows 7 cause "Crash Dump" on my computer.

  Last updated on Windows 7 cause "Crash Dump" on my computer. Watch journal update KB2264107 and KB2454826 will not settle. I do a system restore to get back. I tried the "auto update" three times.

  
  KB2454826 was fired shortly after its initial release, January 11, 2011. Revised (for example, fixed) versions of KB2454826 have been re-published February 8, 2011.

  NB: KB2454826 is an update Important/recommended, it's always an option, not the security update (from this edition). That being said, we now know that KB2454826 is a prerequisite for the update for IE9. As it will probably be a prerequisite update for SP1 of Win7, too, you probably don't want to hide.
  

  KB2264107 is an option, not the security update. Feel free to hide it.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• My computer turns off during an update to windows xp and now windows xp will not load.

  My computer turns off during an update to windows xp and now windows xp will not load.  It gives me the option of last known good configuration and safe mode startup and normal startup, but it just goes back to the loading screen then flashes a blue error screen then back to display boot options.  I don't have a recovery disc as the laptop does not have a CD-ROM drive or a floppy drive.  I have the product key, but I don't know where or how repair the operating system.

  Contact the manufacturer of your laptop as there must be a way to restore the computer. There may be a hidden restore partition.

• last update of windows install loops to 3 of 3 0% complete

  original title: windows install update last

  Running vista basic and installed latest windows update. install a loop at 3 3 0% complete "." Restart in any safe mode option does not. Pressing F8 also does nothing. Impossible to access the control panel.

  Hi Genval,

   
   
  I suggest you to follow the steps in the link and check if it helps.
   
  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7
   
   

• Try to install 4 ' important'updates on Windows Vista and get error codes: 80070641.

  Try to install 4 ' important'updates on Windows Vista and get error codes: 80070641, who has had a lot of answers posted but none does not seem to work and I tried to install this upgrade for the last 6 months! (I did one where you made sure something is running in the Control Panel, but it works just not - I HATE Vista!)

  Now just got a new error code: 6 to 8.

  The updates, I can't update (!) are:

  1. SQL Server 2005 Express Edition Service Pack 4
  2. Update of security for MSOffice 2007 System
  3. Update for MS 2007 Office system
  4. Update for MSOffice Outlook 2007 Junk email filter

  Unfortunately I'm not technically proficient at all and do not understand the jargon I've read on this site so if anyone has an answer, please could you write it as if you were talking to your grandma who only discovered what a mouse!  ;-)

  Thanks in advance

  Sharon

  original title: error codes: 6-8 and 80070641

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

   

  or please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Why my PC does not install updates? Although located to automatically receive my last update was February 2015 and all others have failed.

  Original title: updates

  Why my PC does not install updates? Although located to automatically receive my last update was February 2015 and all others have failed.  Although I tried to reset nothing help.

  Have also tried to download Windows 10 but computer spends all day looking for updates, but nothing happens.

  As its been almost a year that it is updated, you may be better off to backup your data and backup of your entire system, so you can get back to this point at least if something goes wrong. Then:

  Update your anti-virus software and run a full scan. Then download, install, update and run a full scan with Malwarebytesfree. Keep it free, no need to start a trial etc. Malware can be a cause of failure of the updates, the scan won't take long to run and should report something nasty, if its there.

  Then you can try the following:

  1 convenience store update Windows - http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter

  2 system update readiness tool - http://windows.microsoft.com/en-us/windows7/what-is-the-system-update-readiness-tool

  3 components of reset update - https://support.microsoft.com/en-us/kb/971058

  4. check that "Windows update service" and "Background Intelligent Transfer Service" are listed and running according to the details in this article - https://support.microsoft.com/en-us/kb/2730071 "

  If the above does not help, consider trying a 'repair installation system' - http://www.sevenforums.com/tutorials/3413-repair-install.html if you have windows installation discs, or a 'factory reset' (updated) If your PC came with no windows disk and was preinstalled. NOTE - in case backup your data and your system first in the form of data may be lost if something goes wrong, and data will be lost in the case of a factory reset.

  If you do not want to reinstall again, post back with more details, that is at least what is the error code when the updates fail? (find an update failed in "view history update", right click and click details.) Check a bit to see if the same error code. ). Then someone else can we hope to help more.

• Last update of Windows 7

  The last update of Windows 7 is installed automatically on my pc in the last days. After the reboot, the Internet Explorer connection is blocked. A system restore is necessary to return to the operation. There must be a mistake in the last update.

  You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and it seems to be the cause of this problem for most, if not all, users.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

  I got McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee you don't follow their procedure of fix would have upgraded my PC at risk by not updated and, like other McAfee ads have since explained, the application did not refer to its database of threats correctly [and this could explain part of the variability of the symptoms of failure but all involved loss of internet connection]. Actually, I removed McAfee then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

  - - - - - - - - - - - - -

  If you do not have McAfee then Windows update than kb2705219 can also be a cause as the uninstall that appeared to solve the problem for some users [but I'm not particularly convinced by this]. To uninstall an update - control panel, programs & features, [left side of the window] see installed updates. Wait until the system has finished the research for the list of updates. Select update required, then right click and Uninstall.

• The Remote option for matching seems to have disappeared (file/devices/Remote). This discovered after the last updated at 12.4 and Remote app would not work. Suggestions?

  The Remote for iPhone & Remote app matching option seems to have disappeared (file/devices/Remote). This discovered after the last updated at 12.4 and Remote app would not work. Suggestions?

  Fixed. I removed the Remote, reloaded app to my iPhone and then reinstated the info Apple ID and password in the app all connected immediately. The 'Remote' option is not always present under file/devices/Remote, but everything works well at this point.

• I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. Hard restarting does not help, neither do not connect the camera to MacBookPro. Any ideas?

  I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?

  Try the following. It seems yo may have to let the battery drain is completely:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• Update for Windows Vista and receive error 80070490 & 643 codes; any ideas?

  Update for Windows Vista and receive error 80070490 & 643 codes; any ideas?

  80070490 = permission denied / [a problem initializing or using session variables] or item not found

  80070643 = ERROR_INSTALL_FAILURE

  http://support.Microsoft.com/kb/958044

• important updates for Windows 7 and windows 10

  In the optional updates, I've disabled windows 10. For important updates, I checked several updates security for windows 7 (updates are October; there are updates 42 total now). I click ok and then download. The next screen that appears includes "Download windows 10 get installation files."  I canceled the update. The message on the screen that results is "some updates were not installed cancelled 2 updates. He has also "two important updates selected."  When I click on "Try again", windows download 10 configuration files will reappear. I chose a small update to see if the file would actually download and the next screen is the screen with the message Windows 10.

  What is happening with the update windows 7 security and other files?

  How can I get downloads important and not on the Windows 10?

  Why they made system keeping trying to download windows 10 although I unchecked the box for it in the optional updates?

  Searching for updates is also a question as the guard just wheel spinning. Is something to do with updates for windows 7 and 8?

  You are replying to a thread that is almost a year.  Many things has changed.

  I recommend you just go about it:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-7-update-solution/f39a65fa-9d10-42E7-9bc0-7f5096b36d0c