ThinApp Crystal Reports XI

Similar Questions

• Crystal Reports renders not right and toolbar is no longer visible in firefox 21.0

  my application works fine in chrome and internet explore when it comes to crystal reports, but Firefox does not render them correctly. they are disturbed and toolbar is not visible. I use visual studio 2008 for development and crystal reports that accompany it. It works fine on the local system, but have problems when it is deployed on the server online. all my clients are facing the same problem. they use the alternative browser for printing the reports. But I would be happy if Firefox makes correctly. Can anyone help?

  my application works fine in chrome and internet explore when it comes to crystal reports, but Firefox does not render them correctly. they are disturbed and toolbar is not visible. I use visual studio 2008 for development and crystal reports that accompany it. It works fine on the local system, but have problems when it is deployed on the server online. all my clients are facing the same problem. they use the alternative browser for printing the reports. But I would be happy if Firefox makes correctly. Can anyone help?

• VB 6.0 and Crystal Report 8.5

  one of our private applications was developed by VB 6.0 and Crystal Report 8.5. Let me these EOS or produced without license

  Try asking in the forums of Visual Basic:
  http://social.msdn.Microsoft.com/forums/vstudio/en-us/home?Forum=vbgeneral

  Crystal Reports is not a product of Ms. You need to ask them.

• export Crystal report problem

  I have the problem with the crystal in my draft report,

  my project have some points of data, so for that I use the Publisher ck (third-party tool) and the display of the data in the crystal report
  but the alignments and the gaps in the line and tab spaces do not work when I see the report and the export of the report,
  what I can someone help me.
  In my project, I am using vs 2010 and crystal report 2011 support for .net 4.0 framework

  Hello

  What operating system is installed on your computer?

  You can contact the program manufacturer for assistance. Check out the following link.

  http://www.CrystalReports.com/

• I need a copy of Visual Studio 2008 while I have the same version of Crystal Reports that are used by one of my clients.

  Buy Visual Studio 2008

  I need a copy of Visual Studio 2008 while I have the same version of Crystal Reports that are used by one of my clients.

  Can I buy Visual Studio 2010 with MSDN Essentials and then download and use Visual Studio 2008

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  Thank you for visiting the Microsoft answers Forum.

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums

  MSDN forums
  http://social.msdn.Microsoft.com/forums/en-us/VSX/threads

  I hope this helps.

• Error: "could not load the report" while trying to print an invoice with Crystal Reports

  Original title: crystal reports

  I am trying to install a trial version of crystal reports for simply accounting Pro 2007.  The crystal report has been downloaded to computer but when I go to print an invoice I get a message "unable to load the report.

  Thank you

  White

  Hi white,.
   
  Follow the suggestion given in the article below to resolve this issue:
   
  1215058 - error message: "Runtime Error 20525 Unable to load the report"when using CR 9 and OCX
  http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313335333033353338%7D.do

• Crystal Reports driver CR SQLBase - does anyone know where to find that the CD it doesn't install what I see.

  It comes to the help file in the documentation of Visual manufacturing by Infor.  I'm curious to know if anyone knows where to find this driver to update the 'create new Data Source' in the ODBC Data Source Administrator?

  Creating an ODBC entry
   
  Do not attempt to create an ODBC entry if you not have Crystal Reports installed.

  Before you can use the user-defined reports, you must create an ODBC entry for the database so that Crystal can access Crystal dictionaries.

  The method of establishing new connections ODBC differs depending on the version of Windows that you are running. However, you must use the ODBC Administrator to establish this connection. These instructions describe creating an ODBC entry on a workstation running Windows 2000.

  On the start menu, select settings, Control Panel, administrative tools, then Data Source (ODBC).

  The ODBC data source Administrator dialog box appears.

  Click the user DSN tab.

  Click the Add button.

  The dialog box create a new Data Source appears.

  In the list of drivers, select CR SQLBase, provides a Crystal Reports driver.

  If you are an Oracle, SQL Server or DB2 user, select the starting driver by CR and ends with the name of the appropriate database.

  Click the Finish button.

  SQLBase of ODBC driver dialog box is displayed.

  In the Data Source Name field, type LSA SQLBase Dictionary.

  If necessary, enter a description for the DSN in the Description field.

  Enter a default database in the database field. It is the name of the database to which you want to connect by default.

  Click apply to confirm these settings.

  See also

  User-defined help

  Sad that it's my user found the file I was looking for here.

• Using c# to check if the main report contains a sub report in the Crystal Reports Viewer

  Hello

  I currently have a web form application, which displays a crystal report already created using the crystal reports Viewer. In this report, the format is a few pages of the main report, followed by a few pages of the report of void. However, when the user first opens the application, all they see is the main report. Unless they click on the subpage of report the report viewer do not recognize as one of void, even if the user is on the page of report of void.

  I was wondering if there are ways to use the c# code to check if some pages of the main report contains a report without user sup a goes through each page of the report?

  Thanks a lot for your help!

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• I can not install Seagate Crystal reports 6.0 Massage I got is system error configuration configuration is not complete (after 36% of installation)

  I can not install Seagate Crystal reports 6.0 Massage I got is system error configuration configuration is not complete (after 36% of installation)

  Hi elbashkateb,
   
  I suggest you to remove Seagate Crystal Reports from your computer by using the windows cleanup utility. Then download this software again and try to install in clean boot mode.
   
  Download link for the windows Cleanup utility: http://support.microsoft.com/default.aspx/kb/290301  
   
  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Steps to clean boot mode:

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.

  Now, try to install the program and check.
  http://support.microsoft.com/kb/331796 . In addition, see the section on how to restore your computer to a Normal startup mode.

  Hope this information is useful.
   
  Umesh P - Microsoft Support

• Crystal reports visual studio 2013 load report is not

  Hello

  I followed the other forums on the installation of CR and it works in the designer, but when I run the program I get the loading has failed.

  I'm short development on windows 7 and my application pool is a 32-bit active. I'd actually work later, but something happened.

  any direction on it would be grateful

  IM

  Hello

  You can try asking in the Forums, in the linked Thread information CR:

  "is there for visual-studio crystal report 2013?

  https://social.msdn.Microsoft.com/forums/vstudio/en-us/622b4c5f-b944-4e0e-9427-ba7bde875b9c/is-there-Crystal-report-for-VisualStudio-2013-?Forum=visualstudiogeneral

  Microsoft has no support for Crystal reports now.

  http://support.Microsoft.com/kb/317789/en-us

  "Microsoft only supports the program Setup and installation for the Crystal Reports products that are included in Microsoft Visual Studio .NET 2003 in Microsoft Visual Studio 2005 and in Microsoft Visual Studio 2008. All other forms of support is provided by the seller who developed Crystal reports, not by Microsoft. »

  See you soon.

• Crystal Reports on Win7 (64 bit)?

  An application that we use contains the version 8.x of Crystal Reports. We plan to upgrade PC to Win7 (64 bit). Crystal 8.x will work correctly under Win7 (64 bit)?

  I have also a few applications with Crystal version 8.x.  I have no problem with Windows 7-32 bit.  64-bit gives me fits now.  The problem is passing the path to the workgroup system Crystal file through the registry so crystal is able to access the database, which is controlled by the permission of the user.  Another application using Crystal 8.x, using ADO to pass recordset to Crystal runs without any problem.  Thus, it seems to depend on your data access method.  Hope it will be useful to you.  Kind regards.

  =====================================================

  Updated - I found the answer to move the info to the 8.x Crystal via the registry - entries that would normally be in the HKLM\Software\... Key should be moved to the HKLM\Software\Wow6432Node... Key.  The keys to this location are sent to 32-bit programs that run in the 64-bit environment.  So now, I have no problem.

  WARNING: Serious problems can occur if you modify the registry incorrectly by using the registry editor or by using another method. These problems may require that you reinstall the operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk. See How to back up and restore the registry

• Crystal reports XI is compatible with Windows 7

  Hello

  I want to distribute the program that uses Crystal Reports XI on computers with Windows 7. Is this possible?

  For Vista, I have the program runtime, but for Windows 7, I can't find something similar.

  Please advice.

  Anyway Felix here is your answer:
  http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Software&p=Crystal%20Reports%20Developer%20Edition&v=Business%20Objects%20SA&uid=11&pf=0&pi=0&c=Enterprise%20Applications&sc=Business%20Intelligence%20%26%20Data%20Management&os=64-bit Itknowledge24.com

• Crystal Report 8.5 on 64 bit win7/windows 2008 system

  Crystal Report 8.5 on 64 bit win7/windows 2008 system

  My app is a vb app and I am using Crystal report 8.5. It works fine on the 32-bit system and 64-bit Windows 2003 server system. When I run the application even on win7 64-bit or the 2008 64 bit, report does not open. I use vb script to access the database. Part of the code written in the script file VB is the following: Dim objrsRecordSet 'As RecordSet Dim strSQL' As String ' * database connection opened using the parameters passed to the show main Set dbConnection = CreateObject ("ADODB.") DbConnection.ConnectionString Connection") ="Provider = SQLOLEDB; Server ="& mstrServer &" UID ="& mstrUserName _ &"; pwd ="& mstrPassword &" database ="& mstrDatabase &"; "dbConnection.Open dbConnection.CommandTimeout = 200 dbConnection.Properties ("Enable Fastload"). Value = True

  Please help me with this question if someone knows the solution

  Hello

  I suggest you to ask your question at the following link.

  http://social.msdn.Microsoft.com/forums/en-us/vbgeneral/threads

• Crystal Reports XI SP4 with ntdll.dll accidents

  We buyed Crystal Reports XI SP4 and installed on our desktop computer with windows 7 64-bit professional to develop customized reports.

  We installed the driver of iAnywhere advantage Solution Inc. reports.

  When you use the application with this driver, Crystal Reports breaks down and stop working:

  We controlled in Windows Viewer events and we found the following of the crush test log:

  Name of the failing application: crw32.exe, version: 14.0.4.738, time stamp: 0x4fd6ccca

  The failed module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec49b8f

  Exception code: 0xc0000374 - Fault offset: 0x000ce6c3

  ID of the process failed: 0 x 2528

  Start time of application vulnerabilities: 0x01ce3de478baf943

  The failing application path: C:\Program Files (x 86) \SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win32_x86\crw32.exe

  The failed module path: C:\Windows\SysWOW64\ntdll.dll

  Report ID: c10fea22-a9d7-11e2-bdae-d4bed98ca3b4

  Can you help us solve the problem?

  Best regards Mauro Segala

  Hi Mauro,

  Thanks for posting your question on the Forums of community of Microsoft.

  You did changes to the computer before the show?

  Ntdll.dll errors can sometimes mean that a piece of hardware in your computer is faulty.
   
  How to fix Ntdll.dll errors:

  1. reboot your computer. The ntdll.dll error you receive may be due to a one-time, temporary issue and a simple reboot may solve the problem completely.

  2 reinstall the program if the ntdll.dll error only when you use a program.

  3 If the software updates or service packs available, install them too. Software programmers may have identified an issue with the program that caused the ntdll.dll error and then issues a patch.
  Note: third party software that have been installed on your computer are almost always the cause of errors in ntdll.dll.
   
  Also, check if the problem persists in the boot.
  Reference:
  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135
  Note: See "How to reset the computer to start as usual after a clean boot troubleshooting" under more information to prepare the computer to start as usual after a repair.
   
  Visit the links below for assistance:
  http://www.CrystalReports.com/
   
  http://SCN.SAP.com/welcome
   
  Hope this solves the problem.

• Implementation of ODBC for Oracle 11 G XE with Crystal Reports

  Hello

  I am trying to configure ODBC to use with Crystal reports 2013 to connect to Oracle 11 G version XE (11.2.0.0.0)

  I tried to download the Oracle ODBC drivers from site of Oracle, but it did not work.

  It could be that I do not download the proper drivers.

  
  

  
  

  Can someone tell me how to proceed?

  
  

  Thnks

  IQ
  

  
  

  Hello IQ.

  Try to download and install the ODAC / OracleClient, these software can register an ODBC driver in the administration tools, beware of that, Panel 32-bit ODBC is not 64-bit windows.