ThinkPad Edge E530, camera does not / not found

Similar Questions

• ThinkPad Edge 13 WiFi does not work

  Hello

  I've updated my Thinkpad with windows 8.1. But the wifi driver does not work correctly. After the installation, the device has been diasabled with code 10. I looked for a new driver and found one from Realtek to win 8. After this installation and restarting, the wifi works fine. Restarting the laptop again once the device has been disabled again. I have tried many different drivers - it's always the same: after the first installation and reboot it works, after the second start, the device is turned off again.

  Someone knows how to fix this?

  Thanks in advance!

  Kojak

  Thanks for the reply. I found a solution - it's a windows problem 8.1:

  http://ishamsaid.Tumblr.com/post/54179009758/Atheros-WIFI-problem-in-Windows-8-1

  Concerning

  Kojak

• my camera does not work. Device Manager reports "found driver software for your device, but has encountered an error trying to install Windows" I have Thinkpad E420 Laptap. Syed

  Built-in camera does not work on my laptop Lenovo Thinkpad E420. Device Manager reports "found driver software for your device, but has encountered an error trying to install Windows" I have windows 8 Windows 7 upgrade.

  Appreciate your help. Thank you.

  Syed

  Hi Syed,

  Thanks for the reply with the status of the issue.

  I suggest you try to install the drivers for Windows 7 in compatibility mode and check if it works for you. I saw this troubleshooting procedure described working for other members of the community.

  Step 1: Download the driver for the Webcam from this link of Lenovo.

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS015018

  Step 2: Installing the driver in compatibility mode.

  Make the programs more compatible with this version of Windows:

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Please reply with the status of the issue, so that we can confirm that the issue is resolved.

• Re: Satellite L300 - camera does not work after upgrade to Win7

  As in the subject. Camera does not work after the upgrade to Windows 7. I have tried almost everything found on the Internet. The drivers are installed.

  There is no exclamation point in the system.

  Satellite L300 (PSLB8E)

  Hello

  What happens when you start the webcam app?
  All programs-> Toshiba-> webcam

  Did you install other 3rd software part as for example the Skype that could access the webcam?

  Extra tip: go to BIOS and set it to default, save changes, and then restart the laptop.
  Start Skype for example, check the settings in Skype webcam chose correctly.

  It would be really interesting to know if the other software would be able to use the webcam.

  By the way: have you installed Toshiba face recognition? This software use and access the webcam as well
  Then sometimes it would be possible that this software could block the webcam and webcam tool could not work

• Wireless camera does not work with the new router

  Hello, I'm having a problem with a camera D-Link DCS932L after you set up the EA4500.  The manual of the camera can be found here.

  http://d2okd4tdjucp2n.CloudFront.NET/DCs-932L_A1_Manual_v1.00 (NA) - en.PDF

  It worked fine with my old D-Link router.  The rest of the House has not had a problem with the EA4500.  There is a level of criticality around this camera certail and if I can't make it work, I'll have to return the router.  Configure the redirection of port as 5556 ~ 5559, TCP protocol (but I tried "Both" as well"with the IP address of the camera.  It still does not work.

  I craft but not in networks, i.e. I'm not stupid with tech but port quarrels is out of my comfort zone.  This camera with our old router setup took minutes.  I spent five hours trying to make it work on the EA4500.

  I guess you have the static IP value, or having a reserve of DHCP MAC address for the camera, network OK settings.

  What was the authentication wireless on the old router and that you use the new 4200?

  Is it possible that the camera does not support the encryption used by the 4200, i.e. wpa2-personal?

  Have you tried WEP to see if the unit works then?

• USB 20.0 M pixels 6 LED Webcam Web Cam does not?

  Recently I bought this webcam for my laptop, 20.0 MEGA pixel 6 LED Webcam Web Cam camera computer. In fact, I bought two one for me and one for my son and have not been able to get them to function. When I plug the usb and microphone cable, it tells that the new hardware has been found and it is to install the software of the new device. It complements and says device is ready to be used, but the camera does not work. The microphone works without problem, I tried reistalling the device a couple of times and in different ways without success. I tried unisnstalling, resettlement, adding hardware, etc.
  The camera stands out in Device Manager as a camera USB 2.0 in imaging equipment and records of cable into the USB as a Composite USB.
  Does anyone have ideas to make the camera work? I would really appreciate it!
  Running Windows Vista thanks

  Thank you Robert Charney

  Hello

  If the webcam appears in Device Manager, idon't think that you will need special software for the cable.

  You could try the cam with Live Messenger.

  If it fails, you can get an error message more information.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• BlackBerry 10 camera does not

  Hello

  I've updated my Z10 for 10.2.0.424

  After that Z10 my camera does not work & phone went very slow & suspended.

  Please give me a solution on this ASAP.

  Thank you best regards &.

  Eric E.

  Hello

  Thanks for your support, but I found the problem, it's in my memory card, I removed my memory card, and then restart my phone.

  
  Now my Blackberry Z10 works perfectly and battery backup also Verry Good then the previous operating system...

  Thank you best regards &.

  Eric E.

• WVC210 display of the camera does not

  Hello

  I have a wvc210, the small LCD screen on the camera does not do anything, so I can't determine what IP it works stop. The lights work and it starts ok.

  Any suggestions?

  Hello

  First of all, I'm sorry that you are having problems with the camera.

  My first recommendation would be for you to contact the support center at 866-606-1866 so that we can determine if the device is under warranty and replace it.

  If that's not an option, or you already know the product is supported and given that the device works properly, what you can do is look in the DHCP table and find the MAC address of the camera, in this way you now the IP address that uses and will be able to connect to it.

  In addition, if it is not an option, you can download a network scanner (several free on the internet, as always, Google is your friend), the scanner and find the MAC address.

  Once you have found the address, connect to the device and assign a static IP address so you will always know how to access.

  I hope that was helpful.

• Application of my camera does not work

  Application of my camera does not work, it tells me that something went wrong, whenever I try to take a picture, I don't know what's the problem with him. I built in camera on my laptop, and the app is updated. How can I fix?

  Hello

  It is clear from the description that you have problems with the camera application

  Here are a few things you can try

  Method 1: Download and run the troubleshooter app and check.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Method 2: Synchronize the application license and check.

  To synchronize your licenses app, follow these steps:

  a. on the Start screen, tap or click on Store to open the Windows store.

  b. drag from the right edge of the screenand then tap settings.

  (If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down and then click settings.)

  c. press or click App updates. If you have not connected to the Windows store, sign in using your Microsoft account.

  d. press or click on Sync licensing.

  For more information, see the link.

  What to do if you have problems with a soft

  Method 3: reinstall

  Finally, if all else fails, you may need to reinstall the application. Just right click and click on uninstall. Then install it on the app store

  If the problem persists or you want to help, reply to this message

  Ashwin0

• Camera does not work on oovoo or Skype - Windows 8

  my camera works fine when I got on camera about youcam, but when I go to oovoo or Skype my camera does not work why is this and how to fix

  Hi Chris,

  I would be grateful if you could help me with more information.

  1. You receive an error message/code when the webcam opens on Oovoo or Skype?
  2. What is the number and the model of the computer?
  3. Can you use your camera on photo metro app?

  If this problem is specific to oovoo and Skype, I suggest you try to uninstall and reinstall these applications to solve the problem. Refer to this link: http://windows.microsoft.com/en-ca/windows-8/uninstall-change-program

  I found could help article to troubleshoot the camera transmits on Skype. See using these links:

   

  How can I solve problems with the video call in Skype for Windows desktop?

  https://support.Skype.com/en/FAQ/FA1267/how-can-i-solve-problems-with-video-calling-in-Skype-for-Windows-desktop

   

  What can I do if my camera doesn't work in Skype for Windows modern?

  https://support.Skype.com/en/FAQ/FA12242/what-can-i-do-if-my-camera-is-not-working-in-Skype-for-modern-Windows

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• IdeaPad s10-3s drive easy XP camera does not work

  After the link on the top, I found all the XP drivers for my netbook s10-3s after installation, simple camera does not work. any idea on how to solve this problem? Thank you

  Problem solved
  It's really weird
  Open easy-Lenovo Camera(Make sure you install the drivers first though it wont work after installation) > Device Manager-> right click-> update driver-> click on "No, not this time"-> next click-> Choose 'don't search, I will choose the driver to install'-> choose "USB video device" and then click Next.

  That's all. But I can't yet find AMP.exe to run it so I'm going to Skype to test. Works well.

• Updated to IOS 9.3.5 camera does not work on iPhone 6 Plus

  Hi just recently, I've updated the iOS software on my iphone 6 and then I noticed that the camera does not just black screen in Meanwhile appeared when changed to video work the two camera when choose photo camera does not however any idea how to solve this problem

  You see a black screen or a closed lens

  If you see a closed lens or a black screen when you open the camera app, try the following steps:

  1. Make sure that there is nothing of blocking the lens from the camera. If you use a case, try to remove it.
  2. Force the application to close, then open the camera again.
  3. Restart your device, and then open the camera again.
  4. If your device has a front and rear camera, both cameras by tapping try . If you see the firm objective or black screen on one camera, take your device to an Apple Store or Service provider authorized to obtain assistance.

  Get help with the camera on your iPhone, iPad or iPod touch - Apple Support

• Click camera does not

  Hi all

  I have a 6s model 64 GB iPhone.  For some reason, the click of the camera does not work when you take a normal picture.  If I have a filter or change a square photo, click works fine, its only when I use the photo without filter mode.

  I tried reseting all settings, by turning the lock/keyboard click and outside and adjust the volume of the phone, it just seems to not only work in the scenario above.

  Any ideas on how to fix or is this a known bug?

  Thank you

  Paul

  Hello, you can try to do a hard rest before to backup your data.

• After the replacement of my iPhone screen 6, front facing camera does not work.

  After the replacement of my iPhone screen 6, front facing camera does not work. The rear camera works fine, but when I switch to selfie cam I saw a still image of what was on the camera back; and on snapchat it simply refuses to move to selfie cam. I check to make sure that all connectors are deep-set. Any suggestions?

  If someone else that Apple will replace your screen they screwed up. If Apple has replaced your take screen back to the store.

• Camileo S10 camera does not remember the setting of the image stabilizer

  Hello reader Forum,.

  Is it normal that my Camileo S10 camera does not remember setting image stabilizer?
  I use mostly the 720px setting and stabilizing on but after that the camera is off the stabilizer is off again.

  Greetzz... Ben

  Hello

  This could be possible.
  I remember that the focus does not work if the stabilization has been activated
  So maybe it of the intent of the manufacturer that the stabilizer would be disabled again.

  Welcome them