IX4 - 300 d - Raid 5 - unreadable files

Similar Questions

• IX4 - 300 d / General SIN: How can I move large files between different folders?

  Hi @all.

  My new IX4 - 300 d arrived yesterday

  After doing his RAID-things all night, now I want to move my files from my old NAS to this one.

  I do this using Copy-supported by the ix4 - 300 d, which work fine.

  A big problem for me: I want to reorganize some large files / directories (> 200 GB), so I have to cut and paste the files from one folder to another (all on the ix4 - 300 d, but with different user groups).

  When I move files between subfolders in a folder of the sin, it works fast enough - I think here that the transfer will be treated directly by the nas server.

  When I do the same thing between subfolders in different folders (which appear as various network drives in windows Explorer), it seems that the transfer is managed by my pc or laptop - and it is very slow...

  I tried to move the files on my network environment (all folders are subfolders of a server: ix4 - 300 d) because I thought the problem was in my network mapping, but it does not work faster.

  How will I know my ix4 - 300 d to move the files directly (without the "help" from my pc)?

  Another idea for me was to do it via ftp, but my ix4 - 300 d only refused my connection (have to try a little more)

  Please help me

  I "solved" the problem by creating a copy of the temporary employment with the manual removal of duplicates once the task is completed. The copy job run all night.

  For future problems, I must think of an another "file management".

  Thanks for your response!

• IX4 - 300 d - cannot copy files between actions or the ext disk. USB

  Hi forum!

  I can't work for the life of me how to move files between the shares on the NAS. I can access my computer fine actions. I have a USB HARD drive connected to the front USB port and I want to copy some files from the HARD drive to a shared folder on the NAS, but when I'm in the content browser that I have no option to copy, and there is no functionality of drag - move. That I going nuts or something blatantly obvious lack?

  I want to copy data from USB directly as it is a few TB of data and copying on the LAN will take ages. It's going to be a regular thing, but I can't really put in place a copy job, because it is not the same type of data or file locations every time.

  Help, please!

  Thank you!

  Matt

  Hello MattDobson,

  You will need to map the actions:
  https://www.Google.com/webhp?SourceID=chrome-instant&ion=1&ESPV=2&IE=UTF-8#q=how+to+map+a+network+sh...

  And move the data in this way, the Ext HDD will appear as its own share, but can be mapped as others.

  The content in the UI Viewer is not designed to move data.

  You can find documentation and downloads for the ix4 - 300 d here:
  https://Lenovo-na-en.custhelp.com/app/cust_alp/p/1189, 1193/session/L3RpbWUvMTQ0MDUyNTY3OS9zaWQvZWNDc...

  You can download the Storage Manager Lenovo via the link above, and which should help you to map actions.

• migrate from Raid 1 to Raid 5 with IX4 - 300 d

  I am considering buying an IX4 - 300 d.

  But what I want to know: I might consider commissioning with 2 drives in RAID-1 and later on the road buy a 3rd drive to upgrade my RAID-5.

  Is this possible on the fly, which means that I can just put in the drive of the 3rd, and I can upgrade to RAID-5 without data loss?

  (Yes, I would definitely have a backup before doing this, but I want to go create a new RAID-5 and have the backup copy of the backup data)

  And I'll be able to upgrade my drive later RAID-5 3-4 drives?

  Sorry, but I think there is no way to change the RAID level "on the fly"...

  That means backup your data, Notes users and their share of privileges etc. better as all you network configuration and start from scratch.

• IX4 - 300 d frozen at 69% during file system repair

  My Lenovo/Iomega IX4 - 300 d had the file system error, so I made the repair in offline mode, but he has been slain all night att 69% and Internet, SSH or the LCD on the front respond to anything...

  Obviously, I have no choice but to restart the thing, but I * am * curious if others have seen the same thing and if a cause is known?

  I copied the data manually, rebuilt the file system, in turn copied the data and after a reboot it now seems to work...

  Do not know what is the default process, but it was not stable yet in the last 8 hours since I made the Ext4 file system manually!

  I was just curious if anyone else had this behavior too...

• questions ix4 - 300 d

  I just posted this to the thread of IOmega network storage before realizing there is a thread of Lenovo Network Storage here. Any help is appreciated!

  -----------------------------------------------------------------------------------------------------------------

  Hello, I'm new on the NAS and setting just has started up a new ix4 - 300 d with 4 x Seagate NAS 3TO (ST3000VN000) in RAID 10. It took about a day to end and everything seems fine, showing the ability of 5.4 to under the disk management page. Windows 7 (ultimate 64-bit) can see the device, but I cannot map it to a drive: I can't create any action, and it gives me the error "the selected function is not available because of the State of the pools.". I searched online and this seems to be a common problem, but I can't find a useful answer.

  Also, what format of file ix4 - 300 d is to create on the hard drives? I used the diskpart utility to clean each drive before installing the base on what I read on the web. Thus, all the readers had no partitiion or file format. Is this a problem? But I guess that's fine since the RAID 10 has been successfully created.

  Thank you in advance for your help!

  WXY,

  I'm not aware of any spirit of RAID 10 specific questions on the ix4 - 300 d.

  I would go ahead and re - create your RAID 10.

  If the problem persists, you can submit a ticket for support here:
  https://Lenovo-na-en.custhelp.com/app/ask/

  Or, if you wish, you can first submit the ticket and ask for the health of your drive (s) to be checked.

  If it happens again, I think that one or more drives a questions stay synchronized.

• IX4 - 300 d add HARD drive

  I bought an IX4 - 300 d without hard disk and first I install a Raid 0 with 2x1To HDD. Now I add a new 1 to HDD and change for Raid 5, the ix4 recognize my new HARD drive and show TB of space in the State of the system, buy I can't use this space...
  The IX - 4 d 300 does not use that extra space.

  Any idea?

  concerning

  Readers need to be of the same manufacturer, otherwise the unit can accept them. This is because having discs with different specifications can cause problems with the RAID.

• ix4 - 300 d not accessible over the internet or Storage Manager lenovo

  Hello

  I bought Lenovo ix4 - 300 d for a long time now and it was fine up to that of a few weeks, all workers

  I ping the NAS drive to the IP address and all that is fine back.

  I did a lot of research online and have tried just about everything I can find on the subject to try to resolve what I will list below.

  • Hold Reset button 4 seconds (reboots but no change)
  • Hold Reset button 15 seconds (reboots without change)
  • Reboot the router / modem (no change)
  • To connect to a new network (no change)

  I can see the ix4 - 300 d in my area of windows network but cannot access a file because it requires a username / password. Shows NAS in "the other" and "computer."

  It is in 'computer' that the NAS is asking me user credentials.

  I want to completely reinstall the software on the NAS, but I am struggling to find the .tgz to.

  When I have the software is as simple as plugging the USB on the front of the NAS and then boot from USB?

  I could do with help as soon as POSSIBLE because this drive must be used for backups of the company.

  Kind regards

  Nathan Langer

  Vizion5 Creative Media Agency

  Hello digitaliss,

  You will need to contact your local support directly to a film recorder, you can do so here:
  https://Lenovo-EU-en.custhelp.com/app/answers/detail/A_ID/14722

• Password by default Ix4 - 300 d

  Hello

  I have recently buy an ix4 NAS storage - 300 d.

  But I don't know what is the default username and password.

  Hello shahab_shv,

  There is no default username or password.

  You can find the manual for the ix4 - 300 d here:
  https://Lenovo-na-en.custhelp.com/app/cust_alp/p/1189, 1193/session/L3RpbWUvMTQzNjgxMDUxOS9zaWQvU2ZTN...

  Looking for the manual for the word "reset" and you'll find instructions on how to perform a reset of the safety.

• ix4 - 300 d activate gmail

  Hello

  I tried to turn on notifications of e-mail in the ix4 - 300 d, but the testmail is never sent. I use gmail-Server smtp (smtp.gmail.com). How can I configure the e-mail settings to support this?

  Comes to be noted - smtp settings are not required since mail sent through lenovo... Good solution.

• ix4 - 300 d does not start after factory reset and clear disk - HELP!

  Hi all

  I did a rest from the factory of my ix4 - 300 d. Sellected the quick erase option.

  He is now hooked up with "lenovo" on the screen.

  I've tried so far:

  remove all disks

  No network cable

  RESET button on the back (5 to 20 seconds)

  and a lot of power cable in and out

  removed the battery on the Board for 30 minutes...

  Help...!

  Hello VizBiz,

  If you have tried to start with all the removed drives and NAS does not start, I recommend to contact local support and asking an imager:
  https://Lenovo-AP-en.custhelp.com/app/answers/detail/A_ID/18133/session/L3RpbWUvMTM2NjU5MDgxMS9zaWQv...

• Considering ix4 - 300 d need your advice

  Hello:

  I intend to buy the ix4 - 300 d.

  But I have a few questions which need advice.

  Issues related to the:

  1. can I use it to back up my sites, facebook and Twitter data?

  2. is there a special procedure to use Seagate 3TO ST3000DM001 hard drive?

  3. should I update the firmware immediately?

  4. it seems that the warranty is 3 years. Someone did it before using it? How long can you recover your device?

  Thank you.

  Yes, it will be an advanced shipment so we will send you a replacement first unit, and then you will receive intsructions to create a shipping label and ship back us the defective unit in the same shipping box that was sent to you.

• damaged or unreadable file

  My problem with these files unreadable or corrupt, it's that they are connected somehow to my iTunes application. He's been close a months ago that my problem with iTunes started. The app will not retain the library on the app between sign - on. I did the following (not necessarily in this order):

  1 uninstalled iTunes (in order of iTunes, yes every step) and reinstalled iTunes at least 3 times. I even upgraded to the most recent upload Saturday hoping that a fix or something.
  2. I posted on the apple forum. Not an answer. Many points of view. Boo.
  3. I ran the disk check. Also several times.
  4 restart the computer in "safe" mode Tried to delete the files. Always 'impossible to delete corrupt or unreadable files.
  My music files are stored on an external hard drive, so I have not lost any music. I know! And it plays fine on iTunes if I load a file or 2 to listen to, but can not sync with iPod. I am short of ideas also ask google to search. Can someone give me something that I have not tried?
  I am very good following the directions. The only security I have on the computer is MSE. In March, I had major problems & someone to malwareremoval.com with me through a process of 2 weeks of cleaning of a viral attack. We moved most of the files on the disk "D" to help drive "C" CPR. Very good worked til about a month ago.
  My computer is old. Around 1999. Updated to XP and have MS update. Also recently (Sept) access is returned to the humble DSL fiber optic internet. It was a gesture of 1000 miles. Don't know if that has anything to do with it.
  Thanks for your help!
  Shellie

  Without knowing which file he thinks is unreadable or corrupted, it is difficult to solve.  You could try downloading/running "Process Monitor".  This will display all the disk access and whether or not they are successful.  Of course, it will throw a lot of information to you that you will have to sort through, but must indicate failed disk access attempts...

  Process Monitor: <> http://technet.microsoft.com/en-us/sysinternals/bb896645 >

  If you know which files give you bad, then "Unlocker" delete often otherwise UN - delet.able files:

  Unlocker: <> http://www.filehippo.com/download_unlocker/ >

  HTH,
  JW

• Unreadable files on E: (NTFS) when you start Windows XP.

  Original title: unreadable files on E: (NTFS).

  start windows xp... I get the prompt checking file system on E:. Segments of the file 268, 269, 270 and 271 are unreadable. (I suspect that it happened when my printer has been incorrectly disconnected the other day) I can solve this problem?

  Hello

  ·         The quick check for E: drive runs every time that you start the computer?

  ·         Is the E: drive an external?

  You can run a full disc on your machine check & check if the problem persists.

  How to perform disk error checking in Windows XP

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• ix4 - 300 d: first building Raid-5

  Hello

  So, I installed WD 3 x 4TB records and asked to do a 5-Bay Raid. After 2 hours, the progress is only 3%... This means it will take almost 3 days to build the initial array of Raid-5, with no data?

  Thank you.

  Crrispy,

  Lenovo different NAS have different ranges of temp.

  If the firmware related these temperatures and not related error, you are in the normal range.