ThinkPad P50 can no longer be in the BIOS of the screen to start using "enter" and "F1".
I just got a new Thinkpad P50 with Windows 10 Pro. It came originally with a 256GB SATA SSD m2 Windows 10 Pro has been installed. I was initially able to enter the BIOS settings by organizing "enter" during boot where it displays a message like "to interrupt normal startup upward, press ENTER. I know it worked before because I went to check on the parameters of virtualization to enable them.
When you start up Windows 10 Pro, I immediately used the backup Windows and recovery to take a complete image of the system and created a Windows repair disc too. Then I swapped the 256 GB SATA SSD m2 for a 512 GB SSD M.2 NVMe and used the Windows repair disk to restore the system on the new SSD 512 GB image. The process of restoration is completed successfully and rebooted, but at this point, the system would not restart with the mistake 'INACCESSIBLE BOOT DEVICE '. After much tinkering, I finally made a "reset my PC" where it appears to re - install Windows and now it starts very well on the new 512 GB SSD NVMe M.2. Although not as smooth a process as I would have liked, but at least I've made progress.
HOWEVER, now when I start the machine, and I see the message "press ENTER to stop the beginning upward," message, pressing enter does nothing and it immediately starts Windows. The only way that I can return in the BIOS settings is:
(1) start Windows
(2)-> "settings".
(3)-> «update & security»
(4)-> "valuation".
(5)-> "restart now."
(6)-> "troubleshooting."
(7)-> 'advanced options '.
(8)-> "the UEFI firmware settings.
(9)-> "restart."
Yes, it's a 9-step process to restart the machine in order to enter the BIOS settings!
How can I get this back to where holding 'enter' will make me in the BIOS settings when starting upwards?
Reset BIOS default configuration, save it, full stop, restart. Your functions should now be restored
The data of the user of the BIOS has been corrupted by the change in boot disk.
Tags: ThinkPad Notebooks
Similar Questions
-
This just happened to new start-up of three days. Prior to this time everything worked very well. Also it some dialog boxes asking to click to launch an application platform that we know nothing about. We have looked for answers and went to the Control Panel, easy access and off Magnifier. But it is magnified. All icons and applications and the magnified programs.are. No new programs have been installed, no fonts won't changed, none of the DPI changed by us. . Some have suggested to go into the registry, but I'm not here. There are available restore points to restore. I don't know why there are no restore points. Even went in safe mode and couldn't find the restore point. Our solutions may be next = copy data, use the restore disk, and all reinstall. GOSH, there must be an easier than treatment... Or go to the computer repair shop. Suggestions? Please, I beg you!
I am not literate live windows, the problem is on a computer hp laptop that belongs to my wife. My computer is old desktop with xp. I just do e-mail, word processing and accounting and taxes, etc. Nothing very sophisticated. My experience started with the BACK and readers of diskettes, then on all readers, then for win 3.11, 95 and xp. I don't like vista. I'm waitng for win8 get a new box. Thank you.
On Saturday, February 18, 2012 23:24:44 + 0000, decafeinepeuvent wrote:
One of the answers was suppsoed to you also. Sorry, I guess that I have selected the wrong answer area.
Thanks for responding!
You're welcome, and I saw your other answers you have chosen
doesn't matter much.You might want to try adjusting the resolution anyway.
Ken Blake, Microsoft MVP
-
Original title: suddenly I can not connect to the Microsoft Community
I present this post on a second computer. Up to a few hours, after I installed Windows Live Movie Maker, I can no longer connect to the Community MS on my other PC. When I click on 'Sign In' to the MS Community Home Page, I get only a blank, even if his tab page says "connect to your Microsoft account.
I think the problem is in IE because I can sign correctly using Chrome or Firefox.
Can someone shed some light on this problem and we hope to provide a solution?
I have a similar problem on this computer and I am trying to solve the problem. I managed to connect to the Microsoft Community forums by opening Internet Explorer InPrivate browsing. This is only a workaround until I have solve the underlying problem.
PIN Internet Explorer in your taskbar, do a right click on the new icon in the taskbar and select start InPrivate browsing. You can then enter the web address of the Microsoft Community and it should open the community forum. If you click on connect, you will be presented with the Login Page. Unfortunately, please follow this procedure complicated, whenever you want to connect to the community.
On this computer I can connect to other services that require registration to the Microsoft Account for example TechNet. The problem is only with the Microsoft Community forums. What version of IE are you using?
A suggestion if you are using Internet Explorer 9, 10 or 11.
Access your profile. Make sure that you have connected. Click all Threads, click on the star to the top right of the screen (you need to press F11 to see if you're reading full screen), click the scroll right to add it to Favorites, and then select Add to Favorites bar. Change the long name for something memorable, and you can immediately access your son in your Internet Explorer Home Page.
-
Whenever I install automatic updates, I can no longer connect to the internet.
Whenever I install automatic updates, I can no longer connect to the internet. I perform repressive restore, this solves the problem, until the next update. It already has cost me over $ 300 and now I can is more updated windows if I want to keep my internet connection?
Hi Beverly,.
Welcome to the Microsoft community!
After the description looks like after installing the updates you can't access the Internet. We need additional information about this problem. Please answer these questions to help you best:
1. What antivirus do you use?
2. what happens when you try to connect to the Internet after installing updates?
3. the updates are installed on the computer?
Provide us the details of the update that you have installed.
For more information, see:
See the Windows updates are installed
Method 1:
After you install the updates, check if you are able to connect to Internet in Mode safe mode with networking.
Step 1: Networking Mode safe mode starts Windows in mode safe mode and includes the network drivers and services needed to access the Internet or other computers on your network.
Check out this link to start safe mode:
Start your computer in safe mode
More information on:
Startup options (including safe mode)
Step 2: If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: Once you are done with the boot, followstep 3in the article by putting your computer to normal startup.
In addition, visit these links and try the steps listed in the link provided and check if that helps.
Windows wireless and wired network connection problems
Why can't I connect to the Internet?
http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
Hope this helps and provide us more information if you need more assistance.
-
can you help to reset the iPhone 6 +? used of the year and the month. Now, when you update, it asks activation and I can't remember anything! Arouca and verification is in stock
To activate you need your Apple ID and password. If you forgot their date on https://iforgot.apple.com.
-
Web pages can be made to fit the screen
Web pages can be made to fit the screen
You can zoom in and out:
-
Help send emails
I can't send emails with the server that I use to receive. Can you tell me how to find my server going.Your provider of messaging service for this information.
-
How can I fix the screen because everything is horizontal and not vertical poster?
How can I fix the screen because everything is horizontal and not vertical poster?
Hello
Please tr
- Press and hold Ctrl + Al bot
- Press the enemy (left or right because I do not know what sense on your screen)
Hope this helps
-
What can be done so that the screen saver images is displayed in a specific order?
What can be done so that the screen saver images is displayed in a specific order? (I have about 100 photos in the folder I want to use, but they are always displayed in a random order).
Hi c. Singman,.
The random order of the images is by design. Read the following article about the installer:
http://www.Microsoft.com/windowsxp/using/Setup/learnmore/tips/Smith1.mspx
I hope this helps!
-
Can show us scrollbar on the screens where more content is present
Hello
Is there an API that can show a scroll on the right bar where drag us and see the content of the next page.
the purpose of this is that the user must know the amount of content on the home page itself is present in the rest of the screen.
The user must have click on scrooBar to view all the content.
Please help me on this, if this is not possible let me know is there an another way of representing the scroll bar.
Thanks in advance
Ratna
As far as I KNOW, there in no direct api for this.
Concerning
Bika
-
Hello everyone, today I am trying to install adobe cc desktop, but I can't. What is the problem? I use firefox because I'm not with the chrome download
Please see system requirements | Adobe Illustrator
-
I bought LR 5 outright a few months ago and upgraded to LR6. I don't want to subscribe, simply download the new version of LR. How can I do this, all the screens seem to take me to the creative cloud.
Hi Pamela,.
Please download Lightroom 6 from this link:
Digital photography software | Free download Adobe Photoshop Lightroom CC trial
After that get it serialized by following this link:
Adobe Photoshop Lightroom Help | Serialize Lightroom trial to activate like Lightroom 6 CC
Hope this will help you.
Concerning
Megha Rawat
-
How can I get rid of the razor tool after use.
I am a new user. I can't get rid of the razor tool after use. Help
Press a to return to the normal cursor. or use the tool window.
-
Can I load software from the creative cloud both a Mac and PC that I own?
Can I load software from the creative cloud both a Mac and PC that I own? Is this the same annual license costs?
Yes, you can use applications desktop cloud creative on two computers at once, regardless of the operating system of the individual associated with the composition of the creative cloud.
-
You can edit vmx file while the virtual machine is running? And is it safe?
You can edit vmx file while the virtual machine is running? And is it safe?
Hello
Moved to the forum of the Virtual Machine and the guest operating system.
If you edit the VMX while the virtual machine is powered on change is not levied until the power off then power on (not reboot) and there is a good chance that the change will be deleted when turn you off the system. So it is not safe to do so.
Best regards
Edward L. Haletky
VMware communities user moderator
====
Author of the book ' VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.
Blue gears and SearchVMware Pro items - top of page links of security virtualization - Security Virtualization Round Table Podcast
Maybe you are looking for
-
Why iCloud is not in my mail?
I have a MacBook Pro and a Mac Pro. I want to synchronize some mailboxes between the two men. I thought I'd do that via iCloud. iCloud appears on the left column in the Mail on my MacBook Pro. But iCloud does not appear on my Mac Pro. I suppose
-
How to get music on my iPod? Is this possible? Help please I spent hours to try!
-
How to set the cluster error in postexpression?
Hello I created a c language #-driver that returns a 0 for the pass or - 1 for failure in the functions 'int MyFunction(). Now I use this function for teststeps. Question is: How can I use this returnvalue to set the cluster error? So that one - 1 ca
-
USB 3 exit front USB 2 motherboard?
I want to add two USB 3. ports at the front of my Antec Sonata case. My motherboard is an Inter that came with the USB 2 (http://www.intel.com/p/en_US/support/highlights/dsktpboards/d865gbf) technology, but I found an add PCI card which will be relea
-
I updated my windows media player 10 or 11, and the information album site is messed up. It won't change my album information. Please fix the site.