ThinkPad T430s cannot start because

Similar Questions

• Outlook cannot start because DCIMAN32.dll is missing

  Whenever I want to open Microsoft outlook the following textbox is displayed. * The program cannot start because DCIMAN32.dll is missing on your computer. Try reinstalling the program to fix this problem *. Then when I click ok, Outlook opens. Also when you use Internet Explorer, the window open flashes quickly, any suggestions?

  Thank you for your help

  Hey,.

  And have you tried to reinstall Outlook, such as mentioned in the error message?

• Satellite M30: Windows cannot start because a file is missing

  Error message: Windows cannot start because a file is missing.
  \Windows\system32\config\system

  You can repair from ordinary cd and use "r" for repair.

  How to use recovery cd for this... It does not work.

  Hello

  It's not easy to use the repair mode because the recovery image file CD. The other way is that you try to start the operating system is the safe mode and look if the lack of files exist in the C:\I386 folder. If not, well I think that the only way is to recover the system with the recovery CD.

  Good bye

• Tecra M9 - TPSMain.exe cannot start because CpePerf.dll was not found

  Hi and help,

  searched the Web and found other discussions of the forum with similar questions.
  Tried all suggestions, nothing worked. I'm not very good on the computer but you can find my way. In any case...

  After connection messge pop messages - up in succession, similar to: TPSMain.exe cannot start because CpePerf.dll was not found then: TPSoddctl.exe cannot start because CpuPerf.dll not found

  Computer works very well but Power Saver start is not automatic and can't select it from the Panel... "" Toshiba power saver does not work. "
  so select the power options... "could not start because the CpuPerf.dll is not running.
  Did all the research on the net and followed all the tips... i.e. unistall saving in safe mode, uninstall toshiba common utility can uninstall fatal error 0x7e

  Then download Ccleaner, inspections, uninstall with Ccleaner same fatal error.
  In support of Toshiba and tried to install Power Saver... same problem will not install.

  Thus help help help if possible.
  Computer works well but popping up messages are annoying and I'd love to sleep to extend battery.

  Tried the system restore, even though I doubt that it affects the files... Another problem "cannot complete system restore"... tried this several times and cannot restore the system either... What is happening?

  any help please
  Tim

  Hello

  I think you can solve this problem, recover the laptop.
  But that would mean that the whole HARD disk should be formatted and would be installed everything again, I put t know if this is an option for you

  It turns out that something will not with the Toshiba Power Saver installed and, consequently, the popup message.
  Usually new installation of GST should help. But it was not and I m wondering why

  Maybe this is s question really an OS since system restore help (to the previous state) didn t

  He s strange question right now I can suggest only a new recovery

• Program cannot start because wlidcli.dll is missing. Try reinstalling the program to fix this problem.

  I'm trying to set up parental controls for my son.  I get this error at all times and must go to the process in the Task Manager to get the message to stop appearing.  I installed twice things of all Live essentials - all of them even if I don't want or need all - and still get this error message.

  When I go to the website of parental controls and select WLFS in the box for additional controls and then click user account from my son a pop-up message appears and disappears so fast, that I do not see what is the error message.

  How can I fix it?

  Thank you

  Original title: program cannot start because wlidcli.dll is missing.  Try reinstalling the program to fix this problem.

  Hello

  It is possible that you setup parental controls are corrupt. To resolve this issue, follow these steps:

  1. Uninstall Essentials by using the CMD line parameter. Please follow the steps in this link:

  How to uninstall Windows Essentials through the CMD line parameter

  2 remove the Windows Live folders on the following directories:

  C:\Program Files\Windows Live
  C:\Program Files\Windows Live Files\Fichiers

  Note: If there is more than one Program Files folder when you open the C drive, and then double-click Program Files x 86 instead.

  3 reinstall Windows Essentials. Please refer to this article for the download link:

  Windows Essentials 2012

  Thank you!

• The program cannot start because MSVCR110.dll is missing on your computer.

  HP Pavilion g7-2235 dx notebook PC.

  USB ports not working do not.

  Not installed Adobe Reader.

  The program cannot start because MSVCR110.dll is missing on your computer.

  Try reinstalling to resolve this problem.

  Reinstallation does not work.

  Any ideas anyone?

  Thank you.

  There are three files to download.

  vcredist_arm.exe

  Vcredist_x86.exe

  VCRedist_x64.exe

  Should I try any or all of them?

  Thanks a lot again.

• I get an error message: "the progran cannot start because DEVOBJ.dll is missing on your computer.

  When I start my computer my screen is all black and the message says 'the progran cannot start because DEVOBJ.dll is missing on your computer. Try reinstalling the program to fix this problem' I don't see even the Start button if someone knows what's going on please help.

  Take a look at the following:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/devobjdll-is-missing-cannot-login-reinstall/5080677a-DB05-4A34-B36F-d0c3329c2dd0

  I would also like to launch a full scan with your antivirus

• This program cannot start because "php_mbstring.dll is missing. Have tried reinstalling program 6 times.

  Running a program based on php and keep get notification this program cannot start because a file is missing on my computer.

  Hi SAM6423,

  The question you have posted is better suited to the MSDN forums. You can ask your question in the help link.
  http://social.msdn.Microsoft.com/forums/en/categories/

  Hope the helps of information.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The program cannot start because MSVCR80.dll is missing on your computer. Try reinstalling the program to fix this problem. Where can I get this program?

  Pop Up-

  The program cannot start because MSVCR80.dll is missing on your computer.

  Your response-
  Try reinstalling the program to fix this problem.
  Question-
  Where can I get this program to download?

  Hello

  If the problem is with iTunes, uninstall everything according to the instructions from Apple:

  «Remove and reinstall iTunes, QuickTime, and other software components for XP»

  http://support.Apple.com/kb/ht1925

  It is also the same list of what to remove what is in the link above from Apple:

  http://pcsupport.about.com/od/findbyerrormessage/a/MSVCR80-DLL-not-found-missing-error.htm

  Or try this program to remove it:

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  "Resolution of problems with iTunes for Windows Update"

  https://discussions.Apple.com/docs/doc-6562

  If the advice already given does not, please contact Apple for assistance.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  ____________________________________________

  If the problem is not with iTunes, there is other information about this error on the link pcsupport.

  See you soon.

• test of strength of dirt the program cannot start because OpenAL32.dll is missing

  test of strength of dirt the program cannot start because OpenAL32.dll is missing

  Hello

  Did you change your computer before this problem?

  You can follow the suggestions and check out them.

  Method 1

  Check to see if the problem exists in a clean boot state.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: after you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a.Click Startand then click run.

  b.Type msconfig and then click OK.
  The System Configuration utility dialog box appears.

  c the general tab, click Normal Startup - load all device drivers and services, and then click OK.

  d.When you are prompted, click restart to restart the computer.

  Method 2

  If the problem exists, you can uninstall and reinstall the program.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Note: Make sure you have the installationd disk before you uninstall the program

  See also:

  How to manually remove programs from the add tool / remove programs

  http://support.Microsoft.com/kb/314481

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

• Cannot start because of missing or damaged file: \Windows\AppPatch\drvmain.sdb.

  Everything was fine when last stopped.  Then this error message.  Cannot get to anything that will open any program or allow me to run a CD.  Cannot start because of missing or damaged file: \Windows\AppPatch\drvmain.sdb.  Cannot run CHKDSK or use reinstall the CD because there is no place to run is.  Cannot get to Norton to uninstall.  Help!

  Hello

  If we can start safe mode?

  If so, we can perform Clean Boot Troubleshooting:

  http://support.Microsoft.com/kb/310353

  http://support.Microsoft.com/kb/316434

  If this isn't the case, then we might need a Windows XP CD in order to move forward.

  Let us know.

  Best regards

  Matthew_Ha

• [Trying to open the computer management] The program cannot start because MSVCR100.dll is missing from your computer. Try reinstalling the program to fix this problem.

  The program cannot start because MSVCR100.dll is missing from your computer. Try reinstalling the program to fix this problem.

  I get following error when I try to open the computer management in windows 7, the error is as follows.

  The program cannot start because MSVCR100.dll is missing from your computer. Try reinstalling the program to fix this problem.

  Where can I find this dll file and help me to download and install.

  I'd install the Microsoft Visual C++ Redistributable dll, which is necessary for the projects generated with Visual Studio 2010.

  Download the files below according to your operating system version. I would setup versions because they may be needed for different programs. Check in programs and features, you show that you have installed Microsoft Visual C++ 2005 Redistributable and Microsoft Visual C++ 2008 Redistributable? If this is not the case, download the links here.
   
  Package redistributable Visual C++ 2005 (X 86)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=32BC1BEE-A3F9-4C13-9C99-220B62A191EE&displaylang=en
   
  Visual C++ 2005 (x 64) redistributable package manager
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=eb4ebe2d-33c0-4A47-9dd4-b9a6d7bd44da&displaylang=en

  Package redistributable Microsoft Visual C++ 2008 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 86)
  http://www.Microsoft.com/download/en/details.aspx?ID=5555

  Package redistributable Microsoft Visual C++ 2010 (x 64)
  http://www.Microsoft.com/download/en/details.aspx?ID=14632

  Thank you

  Marilyn

• Program cannot start because MSVCR71.dll is missing

  I have Windows Office home and Student 2007 and a 64-bit system.  When you try to open a pdf file in Windows Live Mail, I received this message: the file does not have a program associated with it for performing this action.  Install a program or, if such is already installed, create an association in the default programs control panel.  The program cannot start because MSVCR71.dll is missing on your computer.  Try reinstalling the program to fix this problem.  In addition, after trying to update Adobe Reader, the update has failed because of lack MSVCR71.dll.  Where and how can I get this file missing?

  You may need to resave MSVCR71. DLL or scanner and update/replace it.

  1. First Explorer to make sure that there is a copy of MSVCR71. DLL in the folder c:\Windows\System32. Alternatively, click Start and typemsvcr71.dll. It should be the only thing listed above. Right click, Properties should check its location in c:\Windows\System32.
  2. Click on the Start button and type cmd. Make a right-click cmd , inscription at the top of the list and run it as an administrator. Provide the credentials if necessary.
  3. Re-register the. DLL, type regsvr32 msvcr71.dll . If that solves the problem, you are finished.
  4. If the problem is still there, run a System File Check in the same window CMD. Typesfc/scannow

  This will take a few minutes. A clean update system should bring back something that looks like this:

  C:\>sfc/scannow
  Start scanning system.  This process will take time.
  Start of the phase of verification of the scanning system.
  Full check of 100%.
  Windows resource protection did not find any breach of integrity.

  Could you try it and report the results?

  • If this proposal of solution solves your problem, please go back and mark as answer for others to consider.

• the program cannot start because AegisE2.dll appears during startup

  Whenever it starts windows 7 I get this message. the program cannot start because AegisE2.dll is missing. Someone knows how to solve this problem. Ive done a (sfc/scannow) and cleaned the registry, but nothing works.

  [Original title: Mike Jenkins]

  This seems to be the DLL belongs to your wireless network card.

  I suggest visit your PC manufacturer's Web site and install the latest version of the software or driver related to your Wi - Fi connection or the network and uninstall the current from your PC and restart your PC and install the one you download.

• "Error system, the program cannot start because missing d3dx9_43.dll.

  Original title: error

  So I built a new computer and I was about to play my favorite game, legends, League then suddenly a message said, "an unknown DirectX error occurred and league of legends cannot start. Please make sure that your video card is to use the latest video drivers from the manufacturer. Know the name of my graphics card, ASUS GEFORCE GTX970, I went to their website and downloaded their latest driver. but who did not work, just made another pop up message that says: "system error, the program cannot start because missing d3dx9_43.dll.

  I tried several methods, but many of them do not work and I really need help to solve this problem. Now when I try both messages are in pop up. be really annoyed, I tried another game, Counter Strike Global Offensive, it's the same thing, he has done it before, but it doesn't have a pop-up, it just does not open.

  "I have tried several methods, but many of them do not work.

  This does not tell us what you tried, so I'll start at the top.

  d3d9_43.dll is one of the 'new' DX files, and you have a fresh install of Win7, you need to update DirectX

  (even if the "latest" DX files come from 2010).

  Download DirectX end-user Runtime Web Installer from the official Microsoft Download Center

  DX files can be damaged. In this case you can remove the suspicious file in System32 and sysWOW64 and run the Web Installer to replace this file or reinstall all files DX using the full DirectX Redist (June 2010), which will overwrite all DX files (Web Installer does not overwrite existing files).

  The second option is often necessary because you don't always get a specific file mentioned in the error.

  Download details - Microsoft Download Center - DirectX Redist (June 2010)

  .