MIDI clock problem

Similar Questions

• Satellite P200 - unexplained MIDI file problem message

  Satellite P200 - without any sound media playing I regularly get the pdf file following poster "If you have problems with playback MIDI files please perform following steps.»

  I have no problem with the sound, DVD, MP3 etc.
  No explanation and how can I stop it?

  I always put t understand when this message appears.
  Can you please be more detailed description of the problem?

• LM3S8962: SPI clock problem

  Hello

  I'm working on a project using the star LM3S8962 evaluation kit and a 4-channel analog digital converter 24-bit Texas Instruments ADS1274EVM.

  I want to get the data sent by the ADC with the LM3S8962 using the SPI bus.

  I have all of the example provided by the following link for my case: http://decibel.ni.com/content/docs/DOC-7701

  The ADS1274EVM provides 2 pins for SPI communication: DOUT1 and SCLK.

  When it becomes a clock on the SCLK pin, it starts to send data via DOUT1 pin, there is no pin slave select.

  If I'm right, I don't have to connect:

  -PIN SSICLK for the LM3S8962 with SCLK of the ADS1274EVM pin

  -PIN SSIRX for the LM3S8962 with the pin of the ADS1274EVM DOUT1.

  The ADS1274EVM is powered independently of the LM3S8962, so I connect VA WINE GND as shown on the http://decibel.ni.com/content/docs/DOC-7701page.

  I write because it does not work: the ADS1274EVM sends no data given that I cannot get a clock signal of the SSICLK of the LM3S8962 pin that allows the ADS1274EVM start the conversion

  I think that him 'ARM of SPI create Configuration reference VI' configures a clock that is sent through the LM3S8962 SSICLK pin, but it does not work as expected.

  Can someone help me please? Thank you

  Luke Y.

  Hi Luke,.

  I just tested the example and had no problem generating a clock on SSICLK.

  I join the project I did with LV 2009 SP1. I hope that you could test and tell us if it works.

  Kind regards

• derived clock problem?

  I am tring to derive a clock to 25 MHz using an NI PXI-7842R and labview project will not allow exact clock

  But when I try to do the same thing for a PXI-7830R target, I'm successful.

  What is going on?

  I choose a base of 40 MHz clock

  for 25 MHz, the multiplier is 5 and the divisor is 8

  When I right click on the clock of new derivatives, I get only the possibility to enter a new frequency of the clock.

  Why doesn't the tool let me simply specify the multiplier and divisor?

  I'm using Labview version 2010

  That should work just fine.  The structure of the case will add some overhead to the total runtime of the circuit, but at 50 MHz, these costs should be minimal and you should not encounter many problems of timing.

• Pavilion dv6 2170 clock problem after replacing the CMOS battery

  Hello world. Sorry for my bad likely English

  OK, so the problem started since I changed my laptop CMOS battery. and to be honest it wasn't whit any problem the clock when I replaced it but I if this may be the cause of another problem that later I figuered what the problem was because of the RAM.

  in any case, I changed the Rams and this problem has been resolved. I just set the clock of the BIOS and rebooted the system. After awhile I figuered that windows clock is not fair. I restarted again and saw the BIOS clock. It has been reset for 2009! even when the laptop battery and power supply are attached the BIOS and windows continues to change clock! I even changed my windows and I replaced the CMOS battery with the former, but nothing helped. It seems really strange, but I don't think it's maybe a hardware problem there a driver or something for the CMOS battery... need your help! Thank you!

  You mentioned that the BIOS has been reset for 2009? This means that there is a problem with the current or any leak and the BIOS has been "reset" back at the root of the plant. I'm afraid you have shorted something when you changed the battery not be grounded.

  Worst case is that there is physical damage to your motherboard and there is nothing you can do about it, probably broken a capacitor - who cannot hold a charge to prevent the reset of the BIOS clock.

  However, you can try this.

  Completely, unplug your computer, remove the laptop battery, etc... Then browse 'Guide' your computer for the "hard physical reset" for your CMOS. I don't know what it's like on a laptop, I only did it on desktop with riders. Be sure to follow the directions precisely.

  -Make sure you are properly grounded. touch the metal parts that is grouned before touching anything on your computer.
  -the hard reset should be done for at least 30 seconds, this ensures that the power is completely served the system. Then you can set this back.

  Try this a couple of times, first without removing the CMOS battery and 2nd time after remove CMOS battery and placing it in.

  Good luck.

  BTW, you can also try running without your new memories (if there is more than 1 stick, try them separately). In fact, I would probably try first before doing a hard reset CMOS. The reason why I didn't say earlier, it's because I have assumed that you already tried this.

• Alarm clock problem

  If there is a problem with the alarm clock since 4.4.4 updated and it's still in 5.0.2. When I try to clangw, sound alarm clocks it opens Commander file stock not his! 4.4.4 usually after phone restart everything has worked for awhile, but now in 5.0.2 is not fixing problem. Any ideas how can I get in stock clocks sounds? Or mount it at all?

  You could erase the default values for applications in the settings-applications-all.

• BlackBerry Smartphones Spinning clock problem

  Here, I had a problem relates to a spinning clock that always appears when I lock the keyboard.

  When I bought the first of all, it was not.

  I thought that may be due to some applications that I installed, but I have not installed these heavy applications. My 9700 memory is always around 88 mb. and I uninstalled for some of them.

  I just did a battery pull, but still it does not get rid of the spinning clock

  Your memory active cleaning? Turn it off, you do not need.

  Options > Security > advanced > garbage collection

• After 1.4 update clock problem

  Hello

  I am a user of Palm Pre Telcel (Mexico) and I have problems with the clock on my device since the 1.4 update.

  It is always 1 or 2 minutes before every day.

  Someone knows how to fix this?

  I have network disabled time...

  Thank you!

  I replied to your other post for this problem, we try not to cross-post here, thanks.

  TreoAide

• macbook pro 5.4 Mid 2009 problems

  I'm trying to keep this thing as long as possible, but I have discouraged.  It is overheating, screen extends from nowhere, over and over again, trackpad isn't well moving the mouse.  I had some extra ram installed, but who did not help, but it is running a little faster.  I had a peek inside, it is not dusty and the fan is not dirty.  trackpad clicks on to the bottom, so I guess that the battery is not swollen, even if it probably needs to be replaced at this point.  I run a virus scan - OS X malcol found tonight - don't know what problem this is.  I have upgraded the OS to el capitan.  I bought a mouse for him and it seems to work very well, but I don't know if has nothing to my MBP.  screen grows with or without connected mouse.  view enlargement and shrinkage of himself I'm typing this!  CrazyTown!  any ideas what might be happening here?

  I don't know why iPad, iOS 8.1 is out there.  I'm typing this from my Macbook Pro sick.

• Battery MacBook Pro Mid 2009 problem

  I got a used Macbook Pro Mid 2009 model.

  Works very well with OS 10.11 but the battery life is bad I think

  only the runways for 90 min and then it is empty

  I watched the news, and that's what he said

  Manufactur: DP

  DeviceName: bq20z451

  Pack lot Code 0

  The PCB batch number 0

  Firmware version 3

  Hardware revision 2

  Review of cell 100

  Fee info

  Remaining 267

  Fully charged no.

  Charge no.

  Full charge capacity 1602

  Cycle Count 903

  Normal condition

  Battery installed Yes

  AMPERAGE (ma)-1193

  Voltage (mV) 10967

  Is it just the end of the battery?

  And what would be a replacement of the battery in good condition for this?

  Thank you

  Hello! The battery is old and has almost reached 1000 charge cycles, which means that it may soon become useless.

  I have seen many users asking link to OWC here on the forum and I have seen a lot of positive feedback on this manufacturer, so if you plan to replace the battery, you should consider the OWC part in option.

• Skype clock problems

  Hi all. I use the latest version of Skype and is now, for some reason, running three hours behind my computer clock. [Ex; my computer say 11:00 and Skype will say that the message is sent at 08:00.]

  I get messages the same way. My friend will answer to something I said, and it will appear under mine, but also say that he has been sent three hours before. Essentially, Skype works fine it's just wildly incorrect time display. I followed a suggestion here and checked that Skype has been set on time - my computer is it. So I'm not entirely sure what's going on.

  Does anyone have a solution?

  ZephyrNocte wrote:
  

  That's what is said about the time: line TZ;

  * Time: TZ: UTC - 7, Server: 1461004250, Local: 1461015051

  This translates to:

  Server time: Monday, April 18, 2016 18:30:50 GMT

  Local time: Monday, April 18, 2016 21:30:51 GMT

  This means that the time on your computer is set to a wrong time zone.

  https://community.Skype.com/T5/Windows-desktop-client/chat-time-is-all-wrong/m-p/4334829/highlight/t...

  You must set the correct time zone on your computer.

  http://www.SevenForums.com/tutorials/944-time-zone-change.html

• Clock problem

  Instead of 'AM' or 'PM', my clock has my name!  It has apparently been so for a while, but I never noticed until I tried to set a time within an application and found that I can't indicate whether the time is AM or PM - it is still my name!

  Hey Ed :),.

  Have you tried going to

  Control Panel,
  region and language,
  by clicking on 'additional settings' in the first tab
  and go to the tab "time"?

  You can change the AM and PM tags it. It looks like someone tried trapping you and changed the registry or the application of time management so that your name will appear. I don't see why windows would by default.

  -Alex

• HP pavillion a6720y clock problem

  The time on my HP Pavilion a6720y desktop PC display is seriously wasting time.

  I think I need to replace the internal battery, but I'm not sure if us a solution. Also, not sure where to find the battery once I find.

  Standard button battery is a CR2032.

      

• Julian and Logic Pro problem

  art of sound of hope will read this

  Thanks for your help with before Julian.

  Julian will not be synchronized with the logic

  I read the guide and the external clock selected and the keys and I got the right port enabled in logic and synchronization enabled but now zillion don't sync at all. He did it for a while but then it stopped working the Middle session and now nothing works well.

  am I missing something?

  Thank you

  Hello...

  I had a similar problem when I had my Zillion... This has worked great and synchronized to the logic but then after a few days it has stopped responding to the midi clock and I couldn't work out why.

  Fortunately, the solution is pretty simple once you know the trick...

  Do a hard reset while the Zillion is not connected to Midi...

  HARD RESET

  A hard reset will take care of all of the default settings just like the soft reset procedure, will also receive notes in all scales of the user to a height value of C2.

  Demarrer start with the power off, hold down the - key and switch on the device.

  Press and hold the - key until the display shows serial number units.

• Error trying to synchronize Audio and MIDI...

  43 087 recognition of the sample rate.

  Check for conflicts between Logic Pro X and the external device.

  I have a MacBook Pro from early 2011
  Quad Core 2.2 GHz with 8 GB of RAM

  I have a fairly new 2i2 Focusrite Scarlett, which I was happy to discover is class compliant should so no driver.

  Everything was fine until the last update of logic.

  Now, I get the above error sometimes after only a few seconds of reading.

  I get a similar error message in GarageBand.

  I checked the rate of sampling in the logic is the same as that defined in the Audio MIDI Setup.

  I sent Focusrite who suggested the rampage preferably several files which made no difference.

  Then they suggested re-installing logic that will be my next move unless anyone has any other ideas?

  And OS (OSX) as well updated, or only the logic?  If the operating system has changed to a degree, you also look at this. In the past, there were several problems between logic and the operating system that sometimes requires an update of the operating system to fix the problem.

  That said... Make sure that you have removed these two files, but first, shut down the computer and unplug the Focusrite.

  Restart the computer.

  Then:

  In the Finder, choose go > go to folder from the menu.

  Type ~/Library/Preferences in the field 'go to folder '. (Note: type exactly)---> ~/Library/Preferences

  Press the Go button.

  Delete the file com.apple.logic10.plist from the Preferences folder. Note that if you set custom shortcuts, it will reset to the default values. You can export your custom key as a preset before performing this step. See the user manual Pro Logic for more details on how to do it. If you are having problems with a with Logic Pro control surface.

  then delete the file com.apple.logic.pro.cs from the Preferences folder. Note: be sure and delete the two files.

  If you do not use any custom key commands do not worry on this part, preferably the files will be rebuilt next logical start.

  Then, restart the computer (there is a reason for that) leaves settle, plug the Focusrite, wait a minute, logical to start and go to preferences audio logic, adjust the peripheral input and output on the Focusrite, set the buffer to 256 I/o.   Go into settings of synchronization/MIDI tab and disable all sync to MIDI clock .

  You can disable the automatic update to OSX system preferences, under ideal conditions, the operating system does not have to be updated with a USB or Firewire device connected.