This error message keeps on popping up, C:\windows\system32\igdumdx32.dll

Similar Questions

• I get the error message at startup missing modul c:\windows\system32\wabqwuny.dll

  what I'm doing. Download this file are what

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• error message regsvr32... C:\Windows\System32\wuang.dll'failed

  I've been blocked?

  Hi jojo2411,

  ·         Exactly when you receive the error?

  ·         What is the exact error message?

  ·         If the computer starts up fine on the desktop?

  Please elaborate on the question so that we can help you best.

• My MS DTCconsole program stopped on my computer, and this error message appears when I start my Windows Vista 64 Ultimate edition. Can anyone help? Yiannis54

  My MS DTCconsole program stopped on my computer, and this error message appears when I start my Windows Vista 64 Ultimate edition. Can anyone help? Yiannis54.

  Hello

  The exact error message would have been very useful because it may be Malware.

  It may be a legitimate program.

  http://support.Microsoft.com/kb/174381

  http://www.fileinspect.com/FileInfo/MSDTC-exe/

  Would that be it: "MSDTC Console?

  And can be malicious:

  http://www.bleepingcomputer.com/startups/MSDTC.exe-15826.html

  It can be a boot entry remains of this Malware.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the problem persists after the scan post back or if it was malware take these startup entries:

  "How to use MSCONFIG in Windows Vista"

  http://www.netsquirrel.com/Msconfig/msconfig_vista.html

  You can also use this free program to do, too:

  "Autoruns for Windows V11.32"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  See you soon.

• Upgrade Windows 10: error called "LogonUI.exe - bad Image C:\Windows\system32\LMIinit.dll.

  I have a Windows 7 Fujitsu Lifebook (5 years). I tried to update to Windows 10 without success. Finally after a Windows7 update and then upgrade Windows 10. Success! Remotely, the company THAT THIS guy decided that I had to update W10, now all I get is "failure in the snp nonpaged area - uvc.sys" the laptop then restarts auto and trying again and again. Looking at updates successfully I see there's a Windows 10 call successful as well as failed. I did a reset to, but who brought me back to Windows 7.  That's life.  However, when I close I now get an error called "LogonUI.exe - Bad Image C:\Windows\system32\LMIinit.dll if the other is not designed to run on Windows or it contains an error." Try to install the program by using the original installation media".

  With all the man hours spent the last week and a bit on this point, I have to stay on Windows 7 and when the thing dies completely invest in a new (if my boss allows me)!

  This my friends, is his last chance, can someone help me.

  Kind regards

  Sue

  Hello

  I realize has the inconvenience that you are experiencing with the installation of Windows 10. I will definitely help you with this.

  I suggest you refer to the suggestion created by Andre Da Costa in the link mentioned below:

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-fix-Windows-10-setup-failure/eba3c864-d9fe-4F8E-9468-81b1f89473ed

   

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.

• Error message at startup [.] ShellClassInfo] LocalizedResourceName=@%SystemRoot%\system32\shell32.dll,-21787

  original title: [.] ShellClassInfo] LocalizedResourceName=@%SystemRoot%\system32\shell32.dll,-21787

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  "Ideas: why make this message at startup ' [.] "ShellClassInfo] LocalizedResourceName=@%SystemRoot%\system32\shell32.dll,-21787" how I can remove it?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  The greatest gift that anyone can give to someone else's time. So thank you for your.

  Nothing I've tried on this Web site or any other does not prevent the error of dll text block whatever the hell it is.

  MS know no more apparently.

  but they don't

  http://support.Microsoft.com/kb/330132

• Whenever I start my laptop, this message appears: DWM - Bad Image C:\Windows\system32\d3d10_1.dll

  Whenever I start my laptop, you'll see this message:

  DWM - bad Image

  C:\Windows\system32\d3d10_1.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support

  Please help me with this question

  Thank you

  Shows generally a problem with DirectX see if this previous answer helps

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/system-error-d3d101dll-and-d3d9dll-are-missing/12b3fd74-1083-4193-BBBC-413fdf11edd7

• I can't in windows at all and a bad picture slui.exe message comes up saying that c:\windows\system32\rpcrtremot.dll is not designed to run on Windows. What is the devil?

  Computer went bad after several problems, but after that I tried to do a restore, went up the wrong at worst... start, computer can not go beyond error message saying Windows\system32\RpcRtRemote.dll... What is with all these DLLs in endangered or get damaged.

  Hi Hurigeorge,

  ·         You're able to boot in safe mode?

  ·         Since when are you facing this problem?

  ·         You did it last changes before the show?

  Method 1:

  Step 1: I suggest to start in safe mode, please see the articles below:

  What is safe mode?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-safe-mode

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: I recommend you perform the clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: Try the SFC scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I hope that helps!

• I have an error message whenever I get online - "C:\Windows\SYSTEM32\cmd.exe__The NTVDM CPU"

  Original title: NTVDM CPU C:\Windows\SYSTEM32\cmd.exe__The

  I get this error whenever I get online, I've switched so I can't download anything really great, unless it's an offline Installer, can I download another computer.

  C:\Windows\SYSTEM32\cmd.exe
  NTVDM CPU has encountered an invalid statement.
  CS:1214 IP:011 d OP:2e63 20 6 d 6f choose 'Close' to end the application.

  I have no idea what that means or what he's trying to tell me, all that I know is I think it has something to do with my command prompt... and that's the extent of my knowledge. Hopefully I can help to solve this.

  Try restarting. Often, he corrects the NTVDM errors.
   
  --
  ..
  --
  "Xemas" wrote in message news: 61bbbc96-ba62-46a7-9ed2-cb4fb30b274e...
  > I get this error whenever I get online, I only have dial-up so I
  > cannot download anything really big unless it's an offline Installer.
  > can I download another computer.
  >
  > C:\Windows\SYSTEM32\cmd.exe
  > The NTVDM CPU has encountered an invalid statement.
  > CS:1214 IP:011 d 6f 6 d 20 OP:2e63 choose 'Close' put end to the
  > application.
  >
  > I have no idea what it means or is he trying to tell me, as far as I know
  > I think it has something to do with my command prompt... and who has the
  > expand my knowledge. Hopefully I can help to solve this.
  >
   
   

• Could not open computer management. I m, like__MMC error message cannot open the file C:\WINDOWS\system32\compmgmt.msc

  I am the administrator total privileage still i'm getting the following error...

  MMC cannot open the file C:\WINDOWS\system32\compmgmt.msc

  It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. Perhaps it is also because you don't have sufficient access to the file.

  I am the administrator total privileage still i'm getting the following error...

  MMC cannot open the file C:\WINDOWS\system32\compmgmt.msc

  It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. Perhaps it is also because you don't have sufficient access to the file.

  Hey Sandy_Nepal

  read the answer below

  http://www.Winhelponline.com/articles/72/1/error-message-when-you-try-to-open-a-MMC-console.html

  http://www.allpostnews.co.UK/II27/compmgmt%20msc%20error%20messag.php

  Walter, the time zone traveller

• c:\windows\system32\nvcpl.dll at startup error.

  I get a c:\windows\system32\nvcpl.dll on Win 7 start up. How can I remove it please?

  Please advise?
   
  Original title: c:\windows\system32\nvcpl.dll error

  Hello Clive,.

  Thanks for choosing Microsoft Community.

  What is the complete error message you get?

  C:\windows\system32\nvcpl.dll corresponds to the NVIDIA drivers or any NVIDIA product. While the research with the Dll file that I fell that this could occur when drivers are not updated or if they are damaged.

  You can try the following methods and check if it works:

  Method 1: turn on the computer in start state clean and check to start the giving questions.
  Clean boot will check if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts.
  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135     
  Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Method 2:
  You can uninstall the card readers NVIDIA graphics and the software of the system and then download the driver and see if the problem is resolved.
  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

   
  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Since my last windows update, whenever I open firefox, I get an error message saying BAD IMAGE on the C:\windows\system32\WRusr.dll file. Can you help me?

  The message I get is:

  "C:\WINDOWS\SYSTEM32\WRusr.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your administrator or the provider of support software. »

  I can't open Mozilla firefox more. I tried reinstalling 3 times already.

  I have reintalled webroot and everything seems fine now.

• Receive message "Validation of C:\WINDOWS\System32\VSINIT.dll failure" error message when trying to run Cisco VPN Client.

  windows\system32\vsinit.dll

  I try to run CISCO "VPN Client" connect from my PC at home for my work PC.

  Then, I get a message:

  Validation failed for C:\WINDOWS\System32\VSINIT.dll

  Any ideas?

  Martin

  Hello

  Run the checker system files on the computer. Link, we can see: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747

  Note that: if he asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker: http://support.microsoft.com/kb/900910 (valid for Service pack 3)

  If the steps above is not enough of it please post your request in the TechNet forum for assistance: http://social.technet.microsoft.com/Forums/en/category/windowsxpitpro

• missing windows\system32\nvcp.dll entry window NvSession boot error

  Any help with this. Windows Vista receives this error message, windows\system32\nvcp.dll missing entry error NvSession startup window, during a disconnection. Recently a user's outlook has been removed to solve another problem, and the problem seems to have started just after that. Thank you

  http://pcsupport.about.com/od/findbyerrormessage/a/nvcpl-DLL-not-found-missing-error.htm

  Stages of difficulty c:\windows\system32\nvcpl.dll is missing and c:\windows\system32\nvcpl.dll errors not found

  See if help above.

  See you soon.

  Mick Murphy - Microsoft partner

• Keep gettig this error message when you try to connect to Firefox, the proxy server refuses connections.

  Redownloaded Firefox and keep getting this error message when you try to connect: proxy server refuses connections

           Firefox is configured to use a proxy server that is refusing connections.
  

   Check the proxy settings to make sure that they are correct.
   Contact your network administrator to make sure the proxy server is
     working.
  

  Go to Options > advanced > network > connection > settings, then choose 'no proxy '.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  It is important that you keep updated IE. The information included with your question indicates that you use IE7; you need to update to IE8 for your own protection. IE9 will be available for Windows XP.

  • http://Windows.Microsoft.com/en-us/Internet-Explorer/products/IE/home