This GB giant sucking sound

Ok. No snapshots are present, but now my virtual machine starts using a hard file (no hard file is available in spotlight)

and takes 121 GB on the hard drive of my MacBook and is unshrinkable!  The Win XP Pro VM is only 50GB total size, in

a macbook 250 GB OS X 10.5.6.

I am a great user of network in an academic institution to 50,000 employees who is trialing the Office of vmware fusion

for our company and the support has been less useful and less at the command prompt.

Thank you

These files do not exist on my mac; I checked again just now... Please consult the Bulletin of responses and screenshots in our mutual e-mail chain.

Thank you

On 2 February 2009, at 06:08 VMware Technical Support wrote:

    • Please do not change the subject line of this email if you want to

answer. **

Hello Michael,

Support request 1154049095.

Please follow the steps below to resolve this issue.

1. try to find the following files in spot and remove it from your Mac.

one) Windows XP Professional - 000001.vmdk

(b) Windows XP Professional - 000002.vmdk

(c) Windows XP Professional - 000003.vmdk

(d) Windows XP Professional - 000004.vmdk

2. restart your mac.

3. start the merge.

4. click on VM & gt; settings & gt; Hard drives.

5 check if you can see a check mark before pre allocated Disks.Uncheck space pré-alloué in this window and click on apply 6. start the Virtual Machine and try to reduce the virtual machine.

Please do not hesitate to contact me by replying to this email if you need more information. If the problem is resolved, please confirm the closure of the 1154049095 of application for support.

Kind regards

Simo.

Technical support for VMware Fusion

For the submission of applications for Support Online

http://support.VMware.com/selfsupport/

Knowledge base to correct this information by product http://www.VMware.com/kb Forums of Discussion VMware Fusion http://Communities.VMware.com/Community/VMTN/Desktop/fusion

I tried to locate these files. Below is my answer 1/28. The screenshots I sent you do not display these files. Please see our mutual e-mail chain. Delete the existing hard? Will be the entire hard drive vm crash if I do?

On 28 January 2009, at 17:31, Michael Adolph wrote:

& lt; Photo 2. PNG & gt;

Hello

A search of spotlight for files you listed did not find an any of them. The screenshot above shows the result of a search for "hard". Should I delete these?

Thank you

On 27 January 2009, at 07:43, VMware Technical Support wrote:

    • Please do not change the subject line of this email if you want to

answer. **

Hello Michael,

Support request 1154049095.

Please follow the steps below to resolve this issue.

1. try to find the following files in spot and remove it from your Mac.

one) Windows XP Professional - 000001.vmdk

(b) Windows XP Professional - 000002.vmdk

(c) Windows XP Professional - 000003.vmdk

(d) Windows XP Professional - 000004.vmdk

2. restart your mac.

3. start the merge.

4. click on VM & gt; settings & gt; Hard drives.

5 check if you can see a check mark before pre allocated Disks.Uncheck space pré-alloué in this window and click on apply 6. start the Virtual Machine and try to reduce the virtual machine.

Please do not hesitate to contact me by replying to this email if you need more information. If the problem is resolved, please confirm the closure of the 1154049095 of application for support.

Kind regards

Simo.

Technical support for VMware Fusion

For the submission of applications for Support Online

http://support.VMware.com/selfsupport/

Knowledge base to correct this information by product http://www.VMware.com/kb Forums of Discussion VMware Fusion http://Communities.VMware.com/Community/VMTN/Desktop/fusion

Hello

A search of spotlight for files you listed did not find an any of them. The screenshot above shows the result of a search for "hard". Should I delete these?

Thank you

On 27 January 2009, at 07:43, VMware Technical Support wrote:

    • Please do not change the subject line of this email if you want to

answer. **

Hello Michael,

Support request 1154049095.

Please follow the steps below to resolve this issue.

1. try to find the following files in spot and remove it from your Mac.

one) Windows XP Professional - 000001.vmdk

(b) Windows XP Professional - 000002.vmdk

(c) Windows XP Professional - 000003.vmdk

(d) Windows XP Professional - 000004.vmdk

2. restart your mac.

3. start the merge.

4. click on VM & gt; settings & gt; Hard drives.

5 check if you can see a check mark before pre allocated Disks.Uncheck space pré-alloué in this window and click on apply 6. start the Virtual Machine and try to reduce the virtual machine.

Please do not hesitate to contact me by replying to this email if you need more information. If the problem is resolved, please confirm the closure of the 1154049095 of application for support.

Kind regards

Simo.

Technical support for VMware Fusion

For the submission of applications for Support Online

http://support.VMware.com/selfsupport/

Knowledge base to correct this information by product http://www.VMware.com/kb Forums of Discussion VMware Fusion http://Communities.VMware.com/Community/VMTN/Desktop/fusion

Take a look at: setting says HD there is a snapshot, but there is no

Tags: VMware

Similar Questions

  • Unable to save changes to the sounds. When registered and then double checked, change moved not. This applies specifically to sound for the navigation to start windows Explorer. I'm putting it to zero. »

    Unable to save changes to the sounds. When registered and then double checked, change moved not. This applies specifically to sound for the navigation to start windows Explorer. I'm putting it to zero.

    Unable to save changes to the sounds. When registered and then double checked, change moved not. This applies specifically to sound for the navigation to start windows Explorer. I'm putting it to zero.

    ====================================
    After making your change did you left click... Apply / OK?
    John Inzer - MS - MVP - digital media experience

  • As I installed this, I have no sound, the icon shows his cup and it does not allow me to turn on the sound

    Since I did the update of El Capitan I have no sound, the icon shows the sound is muted, but it does not get the sound.

    Try resetting the SMC.

    Reset the management system (SCM) controller on your Mac - Apple Support

  • This new firefox sucks, it crashes every day. Can I revert to the last version?

    It freezes and does not work well, then I go back to the old, or should I just use internet explore?

    I had 4 FF works well with all the stuff to stop it being stupid, then stop stuff just started one day working on it. And this seems to be after new versions of the new version of firefox shit shit now. Its as Mozilla has begun to operate somehow stopping distance. Clearly, Mozilla has been infiltrated by paid shills designed to destroy the FF and promote Google SpyChrome.I install NEVER Google SpyChrome.But another use Firefox 3.6 FF died.

  • Playing audio file recorded back - where is this feature in the sound recorder in Windows 7?

    Hello

    In past when I was with Windows Vista, I used sometimes to save my own speech and then read it, sometimes backward, with Windows 7, I noticed that 'play back' is an option in the recorder provided with Win 7, I was wondering if there is a way to play audio backward in Windows Media Player, or recorded another way to play audio backward with the tools provided with Windows 7 Home Premium.

    Hello

    The reverse-reading feature is more included. You will need investigate third-party products to take advantage of this feature.

    Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  • How can I cancel? This access point sucks

    I hate this, .i wanted to create my own stuff and it is impossible to fInure out, I come to cancel but could not find the option too

    Cancel see answer #1 in https://forums.adobe.com/thread/2023066 - includes a link to Chat from Monday to Friday

  • Can't print emails Yahoo. Is this a Firefox problem?

    Can't print emails Yahoo. Is this a Firefox problem? I can click on print and e-mail opens in a new window, but when I click on print in the upper part of this new window it sounds right. The only other option on this window is "close this window".

    A fact used to knit before and recently stopped printing?

    To test how Firefox works no 'custom' on your system, could you experience in two minutes?

    Create a new Firefox profile

    A new profile will be your plugins installed by system (for example, Flash) and extensions (e.g., security suite toolbars), but no themes, other extensions or other customizations. It should also have databases of completely fresh settings and cool a cache folder.

    Out of Firefox and start in the profile using Start Manager > Search box (or run):

    firefox.exe -P
    

    Any time want to switch profiles, exit Firefox and return to this dialog box.

    You will click on the button create a profile. I recommend using the suggested default location (do not click the button to choose a different folder). Then launch Firefox in the new profile that you have created.

    You can get the print in the new profile dialog box?

    If so, it is probably a problem with one of your files, settings or extensions. If not, your installation of Firefox is maybe damaged. Rather than insert pages of instructions at this point, could report you on the results of the test first?

    When you return to the Profile Manager to return to your normal settings, you might be tempted to use the button to delete the profile. It's a little too easy to accidentally delete your 'real' profile, so I recommend you to resist the temptation. If you don't want to clean up later, I suggest to make a backup of all your profiles first in case something go wrong.

  • Desktop PC: cannot hear any sound from my computer

    My sound does not work in Windows 10. No sound at all from YouTube videos, music and media players, Windows system sounds, etc.

    Have you tried a few different devices (headphones/speakers)? There could be a problem with the hardware with one of these devices. Also, keep in mind that most of the computers do not have built-in speakers, you don't need to have a connected device to hear anything.

    If you have already tried a few different pairs of headphones and speakers, the first step in troubleshooting I recommend is the easiest: restart your computer. Sometimes a single application can take control of your audio device and do not let all the other apps use, but you can release this control by restarting.

    Here are a few others not you can try:

    • Run the audio troubleshooting tool in Windows
    • Make sure that your device is connected to the appropriate port on the computer, and if you use powered make speakers you they are plugged into a working outlet
    • Set the default audio device to make sure that your computer sends the audio output of the device
    • If your computer comes with 10 Windows installed, you can restore the driver of its origin in the HP Recovery Manager, or to update the driver through Device Manager
    • If you upgraded your computer to Windows 10, you can update the audio driver in Device Manager

    These solutions and much more are explained in detail in this document: HP-no sound from the computer desktop.

  • 550-215na Pavilion: no sound from the rear audio input jack

    Hello

    I recently bought a new PC and I immediately ran into an audio problem that I can't understand. I get no sound at all from the rear audio input jack. I'm getting sound before making, and the plug rear mic works. When I plug something into the rear socket, a message appears grateful that there is something. When I checked the sound settings while it is plugged into the rear outlet, the equalizer is moving, which indicates that he gets his. But nothing comes out when I plug headphones or speakers in. I can exclude a fault with the speakers and the headphones, because they work very well to come forward. All the drivers are up to date.

    Any help would be greatly appreciated!

    Hi there @PrimoFigs,

    I hope you find your experience of positive Support Forum! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you get no sound from your speakers when connected to the rear audio ports. I'm happy to give you a helping hand with this.

    Have you tried to connect another device to this port, whether it of a different set of speakers or earphones, headphones just to test if one of them works?

    What it is connected to the front port at the same time? If so, then disconnect this device and try again the rear port and let me know if there is a change.

    Also try this: desktop HP-no sound on speakers (Windows 8).

    Please let me know if any of the work of tip for you suggestions and if we don't solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

  • Satellite M840-B500: utility of disk protection HARD and low sound

    I have a Satellite * M840-B500 * portable.

    1 Toshiba * HDD protection utility * appeared in its characteristics.
    but it was not installed when I got the laptop.
    I downloaded the HDD protection software against download of Toshiba Europe
    but during the installation of the software it says that this feature is not available in this model.

    2. the sound of the laptop is very low, even if the 'srs premium sound hd' is enabled. All audio drivers are up to date.

    I bought the laptop from the UNITED Arab Emirates and now I am in India.
    Thanks in advance

    > 1. Utility of Toshiba HDD protection was included in its features, but it was not installed when I got the laptop.

    Sorry mate, but what do you mean by appeared in its characteristics?
    If the HARD drive protection utility is not installed by default, the laptop does not seem to be equipped with a sensor HARD drive protection.

    > 2. The sound of the laptop is very low, even if the 'srs premium sound hd' is enabled. All audio drivers are up to date.

    There are not a lot to do to ensure that all volume controllers have the highest value.
    You can do this in Control Panel-> sound-> the Read tab
    You will find various reading devices. Right-click on the device (speakers) and choose Properties.
    Here you can set the volume level

    Of course, you can click on the small speaker icon in the toolbar display volume control

  • No sound on the Satellite X 200 after installing XP

    Hello!
    I installed XP on my Satellite x 200 LC10DC everything works but no sound...

    I watched if it is a problem of missing driver but after downloader and test different driver does not work its still...
    In my driver manager, I find 2 missing driver, unknown device and PCI device and I don't know how to fix them.

    Could you help me guys?

    Hello

    The problem is that you need install Win XP patches before you install the audio driver XP!

    Install it first * patch KB888111, KB835221 and * Microsoft Windows and then after new reboot, you need to install the audio driver compatible XP.

    After this short intervention, the sound should work very well!

    Good bye

  • Acute left of the touchpad Pro S - sound satellite

    This portable (less than 3 hours out of the box) emits a high-pitched noise very low but boring.

    A google search suggests is not uncommon in the range of Toshiba laptops, but I found no "patches".

    Any ideas? Thanks for any help.

    Hello!

    What laptop Satellite you have exactly?

    It's not easy to say what the reason is for this, but sometimes the sounds are due from the HARD drive. Then maybe you should check the drive using the Drive Fitness Test or you start the laptop without HARD drive and go into the BIOS. You hear the sound without HARD drive too?

    Good bye

  • Satellite C75 - A - question installation sound driver

    Hello

    I have this 3 drivers:
    -Driver sound (conexant)
    -Accessory audio Toshiba (Toshiba)
    -Sound studio DTS (DTS Inc.)

    I know that I need to install the sound driver but other 2 need me it?

    I read a few bad reviews:
    -on improving audio toshiba all level/sound quality
    -DTS sound studio remarks inappropriate lift/lower noise level

    Note: my laptop is C75 - A Satellite

    > I know that I need to install the sound driver but do I need 2?
    The other two tools are recommended too. Why? These tools improve laptop audio appearance.

    > When I try to install the audio accessory toshiba, I run the toshiba Extractor application then I have the YES/no pop-up windows. I click Yes then nothing, no installation.

    In my opinion, something goes wrong during the procedure of the extract.
    I recommend you to decompress the package first using 3rd party software such as WinZip or WinRAR.
    I guess you tried to run the exe (for example TC00533100E.exe).

    It is a compressed package. Right click on the exe file and select Extract here.
    This exe file is decompressed and in the package, you would find another setup or install.exe file that could be executed just to start the installation procedure.

    I think this should work for you.

  • Satellite U200 - no sound with Win 7

    Hi all

    I've recently updated my wifes u200 to Windows 7, but for the life of me I can't work.

    Device Manager displays sound like work. If I click on the icon in the tray sound system, it shows the moving bars of top down, as they should, but no sound speakers. The speakers or the headphones no sound.
    In addition, the small toggle on the side switch does not work.

    I tried both the drivers W7 standard drivers for Vista, but nothing works. Any help much appreciated.

    Hello

    Have you checked if the 'secret' has not been activated?
    You should check this in Control Panel-> sound settings.

    You must also remove the sound card in Device Manager and should reboot the device.
    Windows 7 will restart and will ask and recognize the sound card automatically.
    Then you can test the sound.

  • Satellite Pro L300 - no sound with Win7 64

    I have the laptop according to:

    [Satellite Pro L300-1AF | http://uk.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?PRODUCT_ID=1058007&DISC _topSpeed = 1 & service = UK]

    I installed Win7 on the laptop, and now I can't get any sound. When you set the volume control, the level display changes on the operating system, so I guess everything is ok with the connections. I tried many different drivers, including the currently recommended drivers, as well as all the previous pilots (including drivers for different versions of the VICTORY, as suggested on some forums) after many hours trying to solve the problem, nothing seems to work.

    Any ideas or suggestions?

    Hello

    This means that the sound card is properly installed in Device Manager and you don t have no yellow exclamation?

    Perhaps portable speakers are silent. Simply press the combination of keys FN + ESC enable/disable sound.

Maybe you are looking for

  • ON WINDOWS HP SYSTEM RESTORE

    Any restore point I want to go back on the application of SYSTEM RESTORE, a RESTORATION INCOMPLETE window appears on the screen after trying to adopt this procedure Hail Mary.

  • Method to determine if the device is in DST?

    Hi, I looked around, but I'm not... Is there a standard (or algorithm) method to determine if a device is in time, regardless of its current time zone? (I develop in 4.2.1 but I would appreciate a solution for a later version of the operating system)

  • Error 0xc00000a5 in Google Chrome problems

    error 0xc00000a5 in Chrome. What that? How could I solve it? Thank you Yol

  • Tool text blocks Photoshop every time.

    Before today, I've never had a problem with photoshop. But whenever I click on the text tool in photoshop, it crashes, I tried to use a common solution by resetting all the tools and then crashed to photoshop as well. I have no external plug-ins for

  • Cursor: expressions Pick Whip

    I just started my own project with some elements of this tutorial:TUTORIAL | AfterEffects film titles | 3D looking for cloud particles - YouTube style(At 21:00 that he puts in a new adjustment layer control Slider (control) 2 times, and then he chang