This Port Replicator is compatible with Satellite M115 S3104

Specifically, is there a Replicator port or the docking station that works with the Satellite M115 S3104?

I don't know if the universal (mark Targus or other) support this laptop.
Does anyone know of one with support for the following:

4 + USB 2.0 slots
Ethernet
Headphone Jack
VGA

and possibly as well support the power supply?

Thanks for any input.

It is not easy to write on a universal docking station and if you need info on this page from manufacturers check or pick up information from your dealer.
The fact is that your computer docking port laptop hasn t on the underside and can not be connected to a standard docking station.
You must use an external.

So, the best solution for you is to use the Toshiba Dynadock with all the ports you need.
More info about Dynadock you will find under http://www.toshibadirect.com/td/b2c/adet.to?poid=408593

What is your opinion about that?

Good luck!

Tags: Toshiba

Similar Questions

  • Re: Portege R600 - port replicator is compatible with regional products?

    Community of greetings from Toshiba,

    I need to buy laptops for several employees who are moving between the United States, the United Kingdom and the Middle East.
    The Portege R600 exist in all 3 markets, but each has a slightly different part number.

    The part number Replicator of compatible Port to the R600 is difference to the United Kingdom, the United States and the Middle East.
    Users would be able to dock their laptops in one of the 3 offices, because they travel extensively between each country.

    What's the Slim Port Replicator II (PA3603U-1PRP) and Slim Port Replicator III (PA3681E-1PRP) compatible with each of the products of the soil of Portege R600?

    United Kingdom Replicator of ports Slim Portege R600-11B (PPR61E-01G00CEN) III (PA3681E-1PRP)
    Middle East Replicator of ports Slim Portege R600-10 b (PPR61E-00F00MAR) 2 (PA3603E-1PRP)
    USA, Portege R600-S4201 PPR60U - 01700C Slim Port Replicator II (PA3603U-1PRP)

    Someone has an experience buy Toshiba products in the Middle East? Or needed to use Docking Stations in offices in several countries?

    Thanks in advance,
    Ted

    (I posted a similar request in the Forum we and receives no answer - http://laptopforums.toshiba.com/t5/Port%C3%A9g%C3%A9-Laptops/Port%C3%A9g%C3%A9-R600-US-UK-Middle-East/m-p/32060#M489)

    Post edited by: TedRNelson

    Hello

    I think that it shouldn't be a problem with the different Portege R600 in combination with the Slim Port Replicator 3.

    Portege R600-11b, R600-10 b belongs to the same series (PPR61E), that the R600 US belongs to the PPR60U, but this should t be a problem.

    As far as I know the different R600 from different regions are not really different (some belongs to the same series) as far as I know there could be a difference between some pre-installed applications and some modules as for example the card wireless network, but this should not affect the use of Slim Port Replicator 3.

    Cheers mate

  • This HARD drive is compatible with Satellite L30?

    I managed to break (don't ask how) my hard drive on my laptop Satellite L30.
    He will have to find another.

    Could someone help me find where I need?

    Bravo guys

    Hi Matt

    Have you tried to search this forum for more information?
    There are many discussions on models of different laptops and I sure that you might find interesting and useful discussions on the HDD for L30 m.

    For example, I found this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=88214

    The guy said that a 120 GB 2.5 SATA HDD was possible.
    I think you could use a bigger HDD as only 120 GB, you can try a 160 GB if you want.

    Cheers mate

  • Satellite Pro M70: What USB 2.0 Port Replicator is compatible?

    Would be grateful if someone could advise me on the purchase of a USB 2.0 port replicator.

    I think the 3 USB 2.0 ports on my laptop Pro M70 are not enough, and that's why I want to buy a USB 2.0 Port Replicator.

    The site of the Toshiba shop specifies USB 2.0 Port Replicator II (UK) with port network, part number: PX1173U-1PRP, price: 49,93 GBP.

    It has 4 USB ports 2.0, which would give me a total of 6 USB 2.0 ports, which would be the absolute minimum I want. (It also has 2 PS/2 ports, 1 serial port RS232 and 1 USB 2.0 port network that takes in charge rates of 10 / 100 Mbps).

    Can anyone tell if it is powered by the laptop, or by it's own adapter?

    Unfortunately, the Web of Toshiba site has advised that it is currently out of stock and are difficult to get in on all the time, as they are the subject of a sort of "green manufacturing" test.

    This prompted me to consider buying a replicator USB 2.0 ports alternative and all I would prefer one with more than 4 USB 2.0 ports, and in fact 6 or more USB 2.0 ports would be preferable. I'm not really interested in other types of ports that are often provided with the replicators of USB 2.0 ports.

    I would be grateful if someone could recommend/Advisor at a replicator USB 2.0 ports alternative that would be compatible with my laptop Pro M70.

    One of my concerns is how the port replicator USB 2.0 Port is powered. I think I would have preferred that the unit is powered by its own adapter, I understand is 5 Volts with 500 milliamps for each port, rather than to the laptop (probably would be less tax on the laptop, with less heating).

    Thank you
    AlanCB

    I can't comment on the question whether the Replicator you mention has its own power source, although I suspect, he does

    However, I have a satellite Pro M70 too and with a similar problem and wanting a hub to connect to all my external printers, Sandy etc using just one connection, I buy PA3390E-1MPM - a hub of Toshiba, Audio/USB multimedia center, which goes a step further and provides a hub not only for USB sources , but also for the speakers etc.

    It has its own power supply to the unit and connects via USB 2.0 to my laptop. It is also stackable with the Toshiba Gigastore 250 GB USB 2.0 external hard drive (PA3392E-1MPS) which I also use for backups, storing external data etc.

    Had the two units for 3 months now and everything works fine. I got headr of some problems with people in loss of access to the hard drive, but it seems that it was never if it has been disconnected by pulling the cord out usb, rather than make a ' Safely Remove Hardware to disconnect the USB device and so far have had no probs at all

    It has 4 ports, more port network and connections from the speakers for the configurations 2/2.1/4/4.1/5.1 full, more Creative software like drivers, more remote control useful to control audio devices. Oh, and also a Surround sound, and EAX

    Maybe a little more of your option, but worth it in my opinion. If you can't find it on the Toshiba site I have purchased from www.insight.com

    Hope that helps
    Steve

  • Portégé R700-14 days - Express Port Replicator II-Compatible?

    Today, I received my TOSHIBA Express Port Replicator II (PA3680E-1PRP) to use with my TOSHIBA Portege R700-14 days (PT311E-023006DU). I seem to be unable to break the laptop easily into the docking station.
    Please let me know if this port replicator docking station is * the right * for the Portégé R700-14 days.

    Thank you
    Bert van Loon

    Hi mostlymedia,

    I searched a bit using Google and I found that Port Replicator II is compatible with Portégé M750 and Tecra A/M/R/S series but no information on Portege R700 :(

    I think you should ask the ASP in your country if it s the right part or not until you make a mistake.

  • Firefox worked, today has not started with the error the version of this file is not compatible with the version of windows you are using.

    Computer is Windows 7 Ultimate 64 bit. Firefox has work fine for over a year on this computer. Nothing has been changed or updated updated except Windows update indicates that it installed updates on August 19. I had computer week before because only out of town, back entrance and began August 18, but Firefox has worked that day. Does not use FF again until today. Today August 22, firefox does not start, shortcut icon changed program not there. Exe in the folder when you click Poster error message says the version of this file is not compatible with the version of Windows, I am running. Exe of Firefox shows created on 20 August. I suspect the update, Windows or FF but lean towards windows, which was spent, who broke things. I noticed that IE 10 updates, updates of .NET framework and the malicious software removal tool have been installed. I tried to restart the computer, has not set. Tried to run as administrator, did not work. I don't want to uninstall FF, at least have to because of all the things I have here, bookmarks, last past passwords, etc..

    Hello

    Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files (not the profile folder, where the bookmarks are stored) and then reinstall Firefox. Please follow these steps:

    Note: You can print these steps or consult them in another browser.

    1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
    2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
    3. Remove the Firefox installation folder, which is located in one of these locations, by default:
      • Windows:

        • C:\Program Files\Mozilla Firefox
        • C:\Program Files (x 86) \Mozilla Firefox
      • Mac: Delete Firefox in the Applications folder.
      • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
    4. Now, go ahead and reinstall Firefox:
      1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
      2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

    Please report back to see if this helped you!

    Thank you.

  • "This issue is not compatible with your device." Why?

    Hello Firefox! I don't understand, why can't I just install Mozilla browser on my Motorola Milestone XT720? I read "this point is not compatible with your device." Why? Please answer me! Thank you!

    http://bit.LY/fennecftp

    Although it would be good to do a datasheet for your phone. I was under the impression that all milestones were 256 MB.

  • During the installation of Microsoft Flight Simulator 2004, the following error occurs: the version of this file is not compatible with the version of Windows you are using.

    Former title: Microsoft Flight Simulator will not install on Windows 7

    I have Windows 7 Home Premium 64-bit.  I try to install MFS 2004.  The first 3 discs work fine, but when I insert disk 4 to complete the installation, I get the following error message:

    "The version of this file is not compatible with the version of Windows you are using.  Check your computer's system information to see if yo need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher. »

    I have a Dell Studio 1558

    Intel i5 - 520 M

    ATI Mobility Radeon HD 5470 graphics card

    8 GB RAM DDR3

    What can I do?

    Hello

    1. which edition of Windows are you using? Is - this edition is 32-bit or 64-bit?
     
     
    Given that the game is compatible with Windows 7, I suspect that the conflict can be 32-bit or 64-bit architecture.
    The link below shows the compatibility of this game with Windows 7.
     
     
    Method 1.
    We must ensure that the edition of the game must correspond with the operating system.
    If you use 64-bit in this game, you need the 64-bit Windows to install it.
    Method 2.
    If the above information matching I you recommend to start the computer in clean condition and then try to install the game.
    See the article below for instructions on how to start your computer in a clean boot state.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
     
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • After the installation of Windows Vista, I get this error: winload.exe tries to load a 64-bit application, but this processor is not compatible with the 64-bit mode.

    I recently installed Windows Vista on my Dell Inspiron 6000. This installation is completed successfully, but when I tried to start, I got an error message:

    Winload.exe

    Attempt to load a 64-bit application, however this CPU is not compatible with the 64-bit mode.

    I've been clean installation Windows Vista Home Premium. I already had Windows XP Media Center 2004. What should I do?

    Thank you

    Ryan

    Hello

    Do a clean install of XP with the XP disk provided by Dell, if you.

    http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm

    If you do not have your XP disk, you can contact Dell and ask them to send you a XP disc.

    They should do this for a small fee.

    You need to change the Boot order to make the DVD/CD drive 1st in the order of startup and startup disk:

    How to change the Boot order in BIOS:

    http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

    "How to replace Microsoft software or hardware, order service packs and replace product manuals.

    http://support.Microsoft.com/kb/326246

    Vista installation was able to destroy this option of relocation:

    And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall XP back on how you purchased your computer.

    The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

    A Dell must rely on Ctrl + F11 at STARTUP to reinstall XP

    See you soon.

  • try to download the audio book gives the error "the version of this file is not compatible with the version of windows your race."

    frustrated, the overdrive software download player!

    I tried everything I can think of to download this audio book. whenever I try, I get a message error that says "the version of this file is not compatible with the version of windows your race. check the system and see if I need a 32 or 64-bit and contact the software publisher. "or something like that. I downloaded the overdrive media console software, but every time that I try to download an audiobook, it gives this message. I tried to change the settings with the "use an older program with this version of windows' software overdrive console in Control Panel with no luck. Anyone have any suggestions. I need help please!

    Hello

    always check the compatibility of vista programs on the link below

    http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

    If a program is compatible with vista you can try right click on the setup.exe, and then selecting run as administrator

    It is not compatible with vista, you can try running it in a previous operating system mode

    This does not work for all programs

    read the information below

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

    ____________________________________________________________

    and read this information MS, too

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-the-program-compatibility-Wizard

  • The version of this file is not compatible with the version of windows you are runing problem.

    IM facing problem installing some software: the error message is below to:

    The version of this file is not compatible with the version of windows that you are running, check your computer's system information to see whether you need a x 86 version or x 64 of this program and then contact the software publisher

    while trying to change the compatibility to windows 7 option does not appear

    Windows 7 will not be included within the compatibility list, because you are already using Windows 7. Your only option is to contact the Publisher of software (the company that built the program) and get a version that works with your computer type (64 bit or 32 bit, whichever one you have).

  • When installing CD collection national geographic Gets the error, "the version of this file is not compatible with the version of Windows that you are using".

    Original title: the version of this file is not compatible with the version of Windows you are using. Check your computer system information to see if you need a X 86 (32-bit) or X 64 (64-bit) version of the program, and then contact the software publisher.

    I have a large CD collection published by National Geographic. The difficulty lies in the installation of the program that displays the pages. Setup of the program ends. ins.  These Photo CD were produced by mindscape. When you try to contact them, they are based in France, and it is impossible to get support for this product. Is it possible to get the installer on the CD to do its job to provide a way to turn the 'pages '?

    Hello malaglinskom,

    In addition to what Azam offered, you may try the following:

    If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.

    If you run Windows 7 Home Premium, try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other software virtualization part 3rd and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

    Hope this information helps.

    Sincerely,

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • NVIDIA GeForce 8400M GT: the driver is installed for this device is not compatible with Windows 7 (from Vista 32-bit)

    Hi all, I am interested in my Sony Vaio AR41L (under Vista 32 bit SP2) upgrade to Windows 7, but when I run the Windows 7 Upgrade Advisor, it tells me that, for the graphics card, NVIDIA GeForce 8400 M GT, the driver "installed for this device is not compatible with Windows 7.

    Apparently, NVIDIA is not a solution and sent people to Sony, and Sony say that they have not updated the drivers for Windows 7 and that we do not know when they expect to do...

    All known and solved this problem?  Any suggestions would be very helpful!

    Thanks in advance.

    someone noted that nVidia will come out a new batch of pilots in the coming days. (once a month)

    It may be desirable to wait outside and continue with VGA Standard at the moment. Help others, tell us which solves your problem. Click useful Vote for those who help.

  • This TV Tuner is compatible with Windows Media Center?

    * Original title: tv tuner

    My platform is Windows 7. This TV Tuner is compatible with Windows Media Center?

    Individual tuner manufacturers set their requirements so it is best to look at the cards, then check that their specifications.

    KWorld, Hauppauge and now all black list of compatibility with Windows 7 but you would need to check the support WMC compatibility sites because there can be a difference.

  • "This version of this file is not compatible with the version of Windows you are using. Check your computer's system information to see if you need a x 86 (32 bit) or x 64 (64-bit) version of the program.

    Hello

    I seem to be having problems when you try to install a program on my Windows 7 that allows to launch on my Windows XP and Windows Vista. I used the tool to solve compatibility problems and selected these settings in the CONFIGURATION file, but nothing seems to work the error message I get is as follows:

    "This version of this file is not compatible with the version of Windows you are using. Check your computer's system information to see if you need a x 86 (32 bit) or x 64 (64-bit) version of the program, and then contact the software publisher. »

    Is it possible to set my computer to allow this program to run successfully? Any solution would be greatly useful.

    Hello Rdforbe,

    The problem is a software that was created for Windows 95, 98, and Windows XP has no way to work correctly with an operating system that didn't even exist when the software was written. However, the error message you get normally means that you have a 32-bit software that you are trying to install on a 64-bit system.

    To find out if your computer is running 32-bit Windows or 64-bit, follow these steps:
    System opened by clicking on the button start , by clicking on the Control Panel, click System.
    Under system, you can view the system type. This will describe if you have 32-bit or 64-bit.

    You can also try compatibility mode.

    If the program is not compatible, then you try to install and run the program in compatibility mode.

    Use the following steps:

    (1) right click on the program

    2) click Properties

    3) click on the Compatibility tab

    (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

    Check out the link here: make sure to run older programs in this version of Windows

    http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

    If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.

    If you run Windows 7 Home Premium, try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other software virtualization part 3rd and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

    I hope this helps.

    Sincerely,

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

Maybe you are looking for

  • Toshiba 40TL838 - sleep timer does not work or works sometimes

    Hello I bought 40TL838 TVand I have problem with sleep clock does not work or works sometimesbut usually, you see on the screen a minute left and TV never turn off I try to change the language and also options the system reset does not help and updat

  • Update problem with win 7 to 8 T510

    I have a T510 just reinstalled Win 7 using the Lenovo recovery and now I'm looking to move to Win 8 to give a try. I'm lazy, so I just uninstalled programs that are specifically highlighted by the Upgrade Wizard of Windows 8 in the process, not those

  • Cannot install Windows XP SP3

    On a HP w / AMD processor that has recently had a clean reinstall, I can't upgrade to Service Pack 3. Whenever I have try it does not start with the exception of Safe Mode. If I try Windows Update I get error 0X8007043C. To a Web page, it said that I

  • When I try to change username, it goes back into the log on screen

    When I tried to change username on my computer, it redirects me to the log on screen and won't let me log on to another account.

  • Break-in input DLL main.cpl error missing (associated keyboard)

    For quite some time now on my Vista 64-bit system, I was unable to open the keyboard properties.  Its icon does not appear in Control Panel and I can not run it through Microsoft Keyboard (which came when I installed Intellitype drivers) When I try t