Portégé R700-14 days - Express Port Replicator II-Compatible?

Similar Questions

• Re: Portege R600 - port replicator is compatible with regional products?

  Community of greetings from Toshiba,

  I need to buy laptops for several employees who are moving between the United States, the United Kingdom and the Middle East.
  The Portege R600 exist in all 3 markets, but each has a slightly different part number.

  The part number Replicator of compatible Port to the R600 is difference to the United Kingdom, the United States and the Middle East.
  Users would be able to dock their laptops in one of the 3 offices, because they travel extensively between each country.

  What's the Slim Port Replicator II (PA3603U-1PRP) and Slim Port Replicator III (PA3681E-1PRP) compatible with each of the products of the soil of Portege R600?

  United Kingdom Replicator of ports Slim Portege R600-11B (PPR61E-01G00CEN) III (PA3681E-1PRP)
  Middle East Replicator of ports Slim Portege R600-10 b (PPR61E-00F00MAR) 2 (PA3603E-1PRP)
  USA, Portege R600-S4201 PPR60U - 01700C Slim Port Replicator II (PA3603U-1PRP)

  Someone has an experience buy Toshiba products in the Middle East? Or needed to use Docking Stations in offices in several countries?

  Thanks in advance,
  Ted

  (I posted a similar request in the Forum we and receives no answer - http://laptopforums.toshiba.com/t5/Port%C3%A9g%C3%A9-Laptops/Port%C3%A9g%C3%A9-R600-US-UK-Middle-East/m-p/32060#M489)

  Post edited by: TedRNelson

  Hello

  I think that it shouldn't be a problem with the different Portege R600 in combination with the Slim Port Replicator 3.

  Portege R600-11b, R600-10 b belongs to the same series (PPR61E), that the R600 US belongs to the PPR60U, but this should t be a problem.

  As far as I know the different R600 from different regions are not really different (some belongs to the same series) as far as I know there could be a difference between some pre-installed applications and some modules as for example the card wireless network, but this should not affect the use of Slim Port Replicator 3.

  Cheers mate

• What docking station / Port Replicator is compatible for the Satellite P70-A-104

  Hello

  does anyone know what model port replicator (name of Toshiba for docking station?) adapts to Toshiba P-70-A-104?

  Your
  Stephan.

  Hello

  As far as I know that this Satellite has port replicator, so you can use an external device, such as Toshiba Dynadock (universal docking station).
  More info about Dynadock you can find on the pages of Toshiba. As a small preview check please
  http://www.Toshiba.EU/accessories/laptops/docking/universal-docking/pa5082e-1PRP/
  http://www.Toshiba.EU/accessories/laptops/docking/universal-docking/pa3927e-1PRP/

  If you have any other questions you are welcome.

• Satellite Pro M70: What USB 2.0 Port Replicator is compatible?

  Would be grateful if someone could advise me on the purchase of a USB 2.0 port replicator.

  I think the 3 USB 2.0 ports on my laptop Pro M70 are not enough, and that's why I want to buy a USB 2.0 Port Replicator.

  The site of the Toshiba shop specifies USB 2.0 Port Replicator II (UK) with port network, part number: PX1173U-1PRP, price: 49,93 GBP.

  It has 4 USB ports 2.0, which would give me a total of 6 USB 2.0 ports, which would be the absolute minimum I want. (It also has 2 PS/2 ports, 1 serial port RS232 and 1 USB 2.0 port network that takes in charge rates of 10 / 100 Mbps).

  Can anyone tell if it is powered by the laptop, or by it's own adapter?

  Unfortunately, the Web of Toshiba site has advised that it is currently out of stock and are difficult to get in on all the time, as they are the subject of a sort of "green manufacturing" test.

  This prompted me to consider buying a replicator USB 2.0 ports alternative and all I would prefer one with more than 4 USB 2.0 ports, and in fact 6 or more USB 2.0 ports would be preferable. I'm not really interested in other types of ports that are often provided with the replicators of USB 2.0 ports.

  I would be grateful if someone could recommend/Advisor at a replicator USB 2.0 ports alternative that would be compatible with my laptop Pro M70.

  One of my concerns is how the port replicator USB 2.0 Port is powered. I think I would have preferred that the unit is powered by its own adapter, I understand is 5 Volts with 500 milliamps for each port, rather than to the laptop (probably would be less tax on the laptop, with less heating).

  Thank you
  AlanCB

  I can't comment on the question whether the Replicator you mention has its own power source, although I suspect, he does

  However, I have a satellite Pro M70 too and with a similar problem and wanting a hub to connect to all my external printers, Sandy etc using just one connection, I buy PA3390E-1MPM - a hub of Toshiba, Audio/USB multimedia center, which goes a step further and provides a hub not only for USB sources , but also for the speakers etc.

  It has its own power supply to the unit and connects via USB 2.0 to my laptop. It is also stackable with the Toshiba Gigastore 250 GB USB 2.0 external hard drive (PA3392E-1MPS) which I also use for backups, storing external data etc.

  Had the two units for 3 months now and everything works fine. I got headr of some problems with people in loss of access to the hard drive, but it seems that it was never if it has been disconnected by pulling the cord out usb, rather than make a ' Safely Remove Hardware to disconnect the USB device and so far have had no probs at all

  It has 4 ports, more port network and connections from the speakers for the configurations 2/2.1/4/4.1/5.1 full, more Creative software like drivers, more remote control useful to control audio devices. Oh, and also a Surround sound, and EAX

  Maybe a little more of your option, but worth it in my opinion. If you can't find it on the Toshiba site I have purchased from www.insight.com

  Hope that helps
  Steve

• This Port Replicator is compatible with Satellite M115 S3104

  Specifically, is there a Replicator port or the docking station that works with the Satellite M115 S3104?

  I don't know if the universal (mark Targus or other) support this laptop.
  Does anyone know of one with support for the following:

  4 + USB 2.0 slots
  Ethernet
  Headphone Jack
  VGA

  and possibly as well support the power supply?

  Thanks for any input.

  It is not easy to write on a universal docking station and if you need info on this page from manufacturers check or pick up information from your dealer.
  The fact is that your computer docking port laptop hasn t on the underside and can not be connected to a standard docking station.
  You must use an external.

  So, the best solution for you is to use the Toshiba Dynadock with all the ports you need.
  More info about Dynadock you will find under http://www.toshibadirect.com/td/b2c/adet.to?poid=408593

  What is your opinion about that?

  Good luck!

• Portege M750 on plu III Advanced Port Replicator

  The Portege M750 works on Advanced Port Replicator III more (PA3474E-1PRP)?

  Hello

  I discovered that the Express II port replicator is compatible with the Portege M750.

  I searched a bit on google and found this link to an Advanced Port Replicator III over the datasheet. But it s only in German.
  http://www2.inmac.de/inmac_assets/PDF/German/e569412_datasheet.PDF

  However, the M750 Poretge is not listed as a unit compatible and taken in charge.
  So I guess that more Advanced Port Replicator III cannot be used with protected M750 toghterer

  Welcome them

• Port Replicator to the United Kingdom will work with US Portege R830?

  A Port Replicator to speed in United Kingdom Hi (PA3838D-1PRP) will be compatible with the laptop Portege R830 American version?

  I guess you're meaning that this port replicator
  http://www.Toshiba.co.UK/discontinued-products/pa3838d-1PRP/

  It is mentioned that this Port Replicator is compatible with Portege R700 and Portege R830 series.
  European, along with Americans and Australians are very similar to each other so the port replicator, must be compatible.

  But I guess you need an AC wall adapter for plugging the European system in the United States

• For Satellite Pro U200 port replicator

  Can anyone confirm which (if any) of the port replicator are compatible with the Satellite Pro U200? If I understand correctly, one of the USB models should be used, but all those I looked at only list the U300 as being compatible. Maybe it's just because the U200 is now discontinued, but I want to check before you buy.

  Adam

  PX1173E-1PRP USB 2.0 Port Replicator II (Ethernet / EU Version) must be compatible with the Satellite Pro U200 series:

  Check this box:

  [USB 2.0 Port Replicator II (Ethernet / EU Version) | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/individualOptions.do?service=EU&OPTION_ID=95636&to shibaShop = false & SelCategorie = 4697 & tab = 1 #1]

  I hope I could help

• Tecra M7 & express II PA3680E-1PRP port replicator do not work together

  Hello

  I ve a Toshiba tecra M7 in recent years and have just bought a brand new sealed express duplicator II model PA3680E (docking station) but unfortunately it does not work and a new replacement, sent by the provider does not work.

  What's happening:
  With docking station connected to the start; nothing happens, and the Green dock light stays off.

  Windows when I put the tecra m7 on the dock it connects and disconnects immediately then will not reconnect. The power of power port, the lan port and the power switch work on the dock, but I understand that these are just happening through connections. The Green led power lights up also for less than a second.

  For example, when I do a connection hot, windows is connection chime followed immediately by a chime of disconnection and restores, also all USB connected devices flick-on and immediately off the coast.

  I ve tried under the original Toshiba windows XP install (with the latest Toshiba) and a fresh install of windows 7 (fully updated with all the update from Toshiba). BIOS is the latest available 3.50 (also tried 1.70 & 3.20 bios). tried bios USB legacy on and outside.

  Can someone please help

  Hello

  > With docking station, connected to the start; nothing happens, and the Green dock light stays off.

  The green light that is placed near the eject button it lights up green during normal operation and must be extinguished if the phone has been disconnected.

  If the led does not light green, so I guess that the laptop is not connected correctly.

  If you connect the laptop for the first time to the port replicator, a message should appear stating the device connected to the port replicator are ready to use.

  In my opinion, there could be a problem with the pins or connectors, but the question is what may be touched connector: on the side of Tecra or port replicator

  However, I think that go you to your dealer and need to test another.

• Portege R700 and Win 7 Port Replicator Support

  Hello

  Just one running Windows 7 Pro 32 bit on a R700 and use speed duplicator Hi? Not a party PA3838D-1PRP.

  I read on a site of exercise there is no Windows 7 drivers for port replicator.

  Thank you

  As far as I know you don t need any special port replicator driver. If this port replicator is defined as compatible for your laptop model and that you use original Toshiba recovery image it will be recognized automatically and you will be able to use all the available ports on this port reflector.

• Tecra A10 - 1GV and Docking Stations: Dynadock vs Express Port Replicator II

  Hello Forum;

  Official Toshiba site proposes to use the Docking Station Express Port Replicator II for laptop A10 1GV.

  I need for my construction work 2 monitors.

  My question: can I use with the Express Port Replicator II two additional monitors at the same time (there are 2 connectors (DVI and analog VGA/RGB). Is it possible to create two different images in this way?
  Some have said, that after a connection with the DVI - D VGA connector is turned off.

  Someone at - he experiences?

  On the other hand Toshiba offeres the Docking-station "Port replicator USB Dynadock U" -.
  This docking station is only connected via USB with the laptop. According to the data sheet - it provides an analog and a digital monitor with different views at the same time, up to 1920 x 1200 pix., extra headphones and 6 x USB 2.0. more network connection

  This official docking station works with all USB-connect computers, but in the compatibility list does not mention the Terca A10 and gives only a declaration of compatibility for the series Toshiba NB200 from Toshiba.

  Someone out there experimenting with this docking station?

  What would be the best way to work with two monitors + the computer screen?

  Thanks for all the good advice.

  Michael

  Hello

  As much as I know Express Port Replicator supports the simultaneous use of RGB & DVI only if the laptop itself also supports the simultaneous use of RGB & DVI.
  So if the Tecra A10 1GV would support the use of RGB and DVI port simultaneously then Express Port Replicator should support too.

  The Port USB Dynadock Port Replicator support VGA or DVI port. I didn't find the Dynadock, which was equipped with two ports together.
  The Dynadock can be connected to all computers with USB 2.0 and it beautiful s expansion.

• Tecra A9 - connection of two external monitors using Express Port Replicator

  Hello

  I have a Tecra A9 and Express Port Replicator.
  I'm trying to connect 2 external displays, one connected to the output of the laptop and the other connected to the docking station (notebook lid closed, do not use the laptop screen).

  I can't get to work, anyone know if this is possible?

  Hello

  I think you want to connect a VGA monitor and the other to DVI port.
  Is this good?

  Well, I found this doc:
  http://APS2.toshiba-tro.de/KB0/TSB7B0201000CR01.htm

  Depends on used Tecra A9, if you can get a picture on the DVI port on the Express Port Replicator (PA3508E-1PRP) or not.
  The DVI port on the on the Port Replicator Port Express is supported only on computers with graphics card ATI or nVidia.
  If you have a DVI INTEL graphics card port on the on the Express Port Replicator only is NOT supported.

• Use of Tecra M11 on Express Port Replicator II

  Hello all, I wonder if the Group of experts can help with a small problem Im having with my Ministry of the Interior

  My kit is a Toshiba Tecra M11 with Win 7 Enterprise, that I use with a port replicator Port Express and I just upgraded to a Lifebook Seimens, also with a cradle of home. The way I like to work is to use the laptop to connect Central company on the internet by VPN network and then use my PC at home to connect to the laptop via DRC - if I can use the screen Monitor wide and large keyboard (my job is very large Excel spreadsheets). It worked well with the Siemens and especially work with Toshiba, but for a small problem.

  After I have logged on to the network and connected to the laptop, I want to put the lid down, then put the laptop and its cradle of home from the road on a shelf. This has worked with Siemens, but whenever I have try with the Toshiba it puts the machine to sleep as soon as the cover closes and the DRC on the main PC session is suspended. The Toshiba is mounted on its cradle of home throughout this process. Computer laptop & cradle to host both the main pc are all connected by a wired connection to the same router netgear

  How to stop what is happening, that is how to use the device on its base of home with the lid down?

  concerning

  Mark
  Bristol, UK

  In the Windows power plan settings, you can choose the action to COVER closed. The default setting will stay and that is what you have described. So I recommend disabling this option for each Windows power profile.

  Otherwise, follow the instructions posted by Akuma. If you make an update of the BIOS, unplug all devices and close all running programs before doing this.

• Tecra M11-LaTeX runs slow on external monitor using Express Port Replicator

  Hi all

  I am having trouble with my Tecra M11 with an external monitor, through an Express Port Replicator II.

  It is very accurate, but I am running texlive 2010 on my laptop to write a thesis. Whenever I use my laptop screen feature is very good, and it works very fast, no lag when I compile my document. As soon as docking it into my docking station at work to use it on a big screen, whenever I use the same program, it slows down a lot, finally causing the crash program. Its frustrating to lose a lot of your thesis like this! When I connect the external monitor directly to the laptop, it works fine again.

  Something goes wrong in the docking station. Anyone know how I can fix this? Im a little confused and ideas. Maybe I pilot or something im unaware of. My docking station is maybe defective?

  Thank you

  Jake

  Port replicator port on which do you use? VGA or DVI?

  It won't be easy to provide the answer to your question. It is not possible to test all the software available with docking station and research solutions.
  I would say: bad luck.

• Tecra A11 & Express Port Replicator II - USB problems

  Hello

  I'm having a problem with a port replicator that I simple couldn't have resolved for months. I'll try to explain this as best I can.

  We have a Tecra A11, which seems to work fine running on Windows 7 Professional. When the Tecra A11 is pluged in an Express Port Replicator 2, not USB ports in the port replicator's work at all. Very good cell phone fees and the LAN switches on the replicator fine, but the USB ports simly does not work under any circumstances. It would also be interesting to note that the green light next to the "eject" button lights never really.

  I downloaded and installed the latest series driver for Windows 7 from the Toshiba support page which has no effect. We had 2 replacements for Toshiba because they also agreed that the previous, we had were not woring correctly, but this obviously was not the case because we still have the same problem with our 3rd unit. The Tecra A11 was sent back to Toshiba with case notes clearly describing the question, and he was sent to us "no fault found".

  Unfortunately, we don't have any other laptops to test on the port replicator. but I'm seriously suspect that the problem lies in the laptop, rather than the port replicator. For any idea or suggestion will be greatly appreciated.

  Kind regards

  Steve.

  Hello

  According to your message, you are not sure if the problem is related to the defective laptop Tecra or express port replicator.
  Hmm theoretically the problem might be related to defective express port replicator or Tecra.

  If found some information on the USB ports and the repliators port:

  + Make sure that the element of Legacy USB in the BIOS emulation is set to "Enabled". This feature only works for the keyboard and mouse. Also note that the keyboard and mouse must be connected before you start the computer. A USB mouse, keyboard or the floppy drive connected to the Port Replicator via any other connection that a hub of the first level, will not work until the operating system has started. +

  I also recommend to check the version of the BIOS; If the most recent BIOS is available, then you need to update this