This "Recovery disc" option will work with my PC?

I have a client who is an emergency wants to start to use their computers again (a HP Pavilion p6347c windows 7 Home premium 64-bit, product #: ay614aa #aba), so I have to stop chasing dead ends and ask them to buy a new PC - if it's what ultimately will happen anyway.

The SATA hard drive is dead. I installed a new, but we need the recovery disks to reinstall the OS Win7. I was all prepared to order on Friday evening on the HP site recovery disc, I was on the screen to enter a credit card number and I stopped to confirm the purchase by the customer, and when I got home, the hp recovery disk order online site had declined, until ' Sunday 26 9:00 AM CST. But this time has passed and the site is still not up. I have a bad feeling.

My work depends on not wasting any more time. I need to know the following:

(1) the Web site will go online at any time in the next 24 hours? (was supposed to be lifted this morning)

(2) my "build NUMBER" is "a1nav6pra2". The link
http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 4120...
I intend to use to order my recovery discs says:
"windows 7 64B a1nav6pra1 + supp 7 recovery kit.
That is to say. "a1nav6pra1" instead of "a1nav6pra2". The gap of a figure is a problem?

(3) HP recovery discs check the hardware to ensure that the material matches. I replaced death hard drive HITACHI (HITACHI 640 GB 7200 RPM SATA-II 16 MB of buffer "HDT721064SLA360") with a new SATA hard drive (SEAGATE st3500641as-rk, 500 MB, 16 MB cache, 7200 RPM).
Is there a reason the recovery disks will not be installed on this drive?

Thanks for any help!

You can also call HP to the 800-474-6836 and ask to order a set of disks. The disks should work even with the gap of a figure. Sometimes, the recovery discs are reluctant to a hard drive that is smaller than the original disc to factory.

You can also order the recovery of ComputerSurgeons.com disks

Tags: HP Desktops

Similar Questions

  • This PSU and GPU will work with my dell inspiron 660?

    Hello

    I got my dell inspiron 660 earlier (2 years ago) and was thinking of upgrading the PSU and GPU (I'm not a big PC gamer so cheap products, I chose will be much used) anyone of you could tell me if it would be compatible with my inspiron and between them. And if not could you tell me some compatible CPU and GPU, my spending limit is £90.

    GPU - Asus GeForce GT 610

    PSU - power supply 600W Sumvision power X 3

    Thanks in advance,

    I think that the 660 has a 300W power supply.  What is the Min requirements for the GT 610?  I think you could slamming in there without having to upgrade the power supply at all.

  • If I purchased this computer about 4 months ago I can support windows 7 free? and the 64-bit system will work with windows 7

    If I purchased this computer about 4 months ago I can support windows 7 free? and the 64-bit system will work with windows 7

    This is the Forum for Windows Update.

    How does the Windows 7 upgrade Option?

    The Windows 7 upgrade Option is available through participating PC manufacturers on some PC and Microsoft on any purchase of packaged product Windows Vista. The Windows 7 upgrade Option applies to Windows Vista Home Premium, Business and Ultimate editions. Your upgrade to Windows 7 will be the comparable version: so you will get either Windows 7 Home Premium, Windows 7 Professional (upgrade to Windows Vista Business) or Windows 7 Ultimate, respectively. The Windows 7 upgrade Option program works on June 26, 2009 through January 31, 2010.

    http://www.Microsoft.com/Windows/buy/offers/upgrade-option.aspx

    Above Microsoft link has info for the Options to upgrade Windows 7 from participating computer manufacturers.

    Read the info here to see if you qualify.

    http://www.Microsoft.com/Windows/buy/offers/upgrade-FAQ-option.aspx

    FAQ about the upgrade is at the link above.

    http://www.Microsoft.com/Windows/Windows-7/get/Upgrade-Advisor.aspx

    Windows 7 Upgrade Advisor.

    http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

    Railways upgrade to Windows 7 at the link above.

    For any other question of Windows 7:

    http://social.answers.Microsoft.com/forums/en-us/category/Windows7

    Link above is Windows 7 forum for questions on windows 7.

    Windows 7 questions should be directed to the it.

    You are in the Vista Forums.

    See you soon.

    Mick Murphy - Microsoft partner

  • This external modem will work with Satellite L500-1XL, running Windows 7

    Hello

    When in Spain, I need to use the dialing up to the internet through Telefónica.
    I guess that the L500-1XL is not an internal modem?

    This external modem will work with the L500-1XL running Windows 7?

    Thank you very much in advance for your help.

    A

    Hello

    You re right Satellite L500 doesn t have an internal modem, so you need an external.

    I think you can buy every modem that is compatible with Vista. Alternative ask your favorite computer dealer or authorized service provider

    A friend got good experience with USRobotics 56K modem like this:
    [USRobotics 56K USB Faxmodem USR5637 | http://www.amazon.co.uk/USRobotics-56K-USB-Faxmodem-USR5637/dp/B0019LZCEI/ref=sr_1_1?ie=UTF8&s=electronics&qid=1269253039&sr = 8-1]

  • This power supply will work with my PC?

    This power supply will work with my PC?  I have a Compaq Presario SR5816F

    http://www.Newegg.com/product/product.aspx?item=9SIA4CP1GF8726&cm_re=power_supplies_500w-_-9SIA4CP1G...

    http://www.Amazon.com/solid-gear-series-ATX12V-SDGR-500BX/DP/B00FF7VEJE

    JCGood1984, welcome to the forum.

    The computer should take a standard ATX power supply unit (PSU).  I suggest to measure the existing PSU and compare measures in the links.  If the measurements are the same, it should fit.  I don't know anything about the brand, however.

    Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

  • "This installation disc is not compatible with your version of Windows.

    I have a center of Lenovo think that I got from a friend. When I tried to install Windows 7, I get a pop up window that says: "this installation disc is not compatible with your version of Windows.

    Contact Lenovo and get a set of discs of recovery/restore the system if you want to reinstall the version of Windows that comes with it.  Now, your most likely problem is that you have a record of 64-bit and you try to install it inside the XP which is a 32-bit operating system.  Will not work.

  • Cannot boot from the Windows 7 installation DVD. Error when installing XP "this installation disc is not compatible with your version of windows. To upgrade, you need the correct installation disc.

    Please help me

    Why my cd not DVD boot? will have a difficult time install my win7 home ed I have xp and the note ""this installation disc is not compatible with your version of windows. " To upgrade, you need the correct installation disc. For more information, see your computer system information. To install a new copy of Windows, restart (boot) your computer using the installation disc, and then select custom (advanced option). "always keep flashing... I already did your post, but I cant stand dvd always turn to windows xp? and my driver working I just installed win xp months ago

    Hi the prey,

    ·         What is the brand and model of the computer?

    You should check the settings of the computer BIOS (Basic Input\Output System) to boot from the CD/DVD. Check the manual or the support of the computer Web site for the same.

    Note: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.

    Run the Windows 7 Upgrade Advisor to see if your computer is compatible to install Windows 7.

    Windows 7 Upgrade Advisor - download - Microsoft Windows

    See also:

    Installation and reinstallation of Windows 7

  • Will 1st gen magic mouse will work with the new Mac Mini?

    #1

    I'm going to buy a new Mac Mini and one of the options is to add a second magical mouse of gen. I have a first gen magic mouse. I guess this first mouse magic gen will work with the new Mac Mini, but I want to check.

    The old mouse Apple and any other generic pc mouse will work fine with the Mac Mini.

  • Microsoft SyncToy will work with Windows XP?

    Original title: Windows backup & recovery software.

    Microsoft SyncToy will work with Windows XP as backup & recovery or only spiritual utility Windows 7?

    Hi Daryl,

    Which version of the Microsoft SyncToy software you want to install?

    SyncToy 2.1 is an application that synchronizes files and folders between locations.

    It is generally used for sharing files, such as photos, with other computers and create backups of the files and folders.

    If you want to install Microsoft SyncToy 2.1 on Windows XP, you can download it from this link:

    SyncToy 2.1

    Hope the helps of information.

  • I get an error message that my memory is low, but when I go to delete files from my recovery disc it will not allow me too.

    Original title: recovery Partition

    Stays of complete recovery partition may not free up any space. I get an error message that my memory is low, but when I go to delete files from my recovery disc it will not allow me too. There are 6 total folders on my drive:

    Dell, Program files users tools and windows sources.

    The Windows folder and the program are the most important concerts of 6-7 piece. But when I try to delete them or move only to the recycling it is bin-error right and says Destination folder access denied and I need permission for this action... Any idea would be deeply appreciated. Thank you

    I apolgize if I look tense. That's the way I read your phrase... > if I try yo run an app download anything I get this error...

    I suggest that you contact the manufacturer of your computer. Ask to speak to a technician and explain to that person of the situation.

    I'm afraid that I have no idea why your recovery partition gives you message "not enough memory" If you have never touched him.

    Maybe you'd wait for people with better computer skills to help you.

    Thank you.

  • My speakers Altec Lansing ADA745 will work with my 530 s the new Dell Inspiron PC?

    My speakers Altec Lansing ADA745 will work with my 530 s the new Dell Inspiron PC?

    I watched updates of the audio driver for my pc and am not sure which one I need or you can even use it.

    Although "4.1" speaker systems are very common, the ADA745 should work without problems on a new system.  I have no connection to the ADA745 info but I guess it would connect everything as you are currently connected to the old PC.  New systems PC audio supports up to 7.1 speaker (with the most common 2.1 or 5.1) systems.  There is no drivers for speakers, however, you need to define the types of speakers in the control panel (e.g. article 4.1, and if this isn't an option, try the 5.1 and see if works well).   Printed with the new PC installation worksheet should detail the audio connections and if not, there is a copy of the Dell manual loaded on your PC and it has the details on the back panel connections.

    In Vista, the sound control panel is accessible by Start/Control Panel/hardware and sound/Sound.

  • Upgrading the video card and power supply, these will work with my system?

    Hello, I am wanting to update my graphics card as my current one is finally fall behind on current games, BF3 beta is a restless nighmare and BC2 must be smooth running low (ick). I was satisfied with the weaker graphics for now, but its time for an upgrade. In any case, I think I have my selected updates and I just want to confirm that they will work with my computer until I pull the trigger. My current equipment:

    HP p6180t

    http://h10025.www1.HP.com/ewfrf/wc/product?product=4010451&LC=en&cc=us&DLC=en&lang=en&tmp_track_link...

    Intel Core2 Quad 2.83 GHZ

    8.00 GB RAM DDR3

    Vista 64-bit

    Creative Sound Blaster X - Fi Audio Xrteme

    1.5 GB NVIDEA GeForce GT230 [DVI, HDMI, VGA]

    I plan on upgrading the graphics card on an Asus NVIDEA GeForce GTX 560 (Fermi)

    http://www.Newegg.com/product/product.aspx?item=N82E16814121446

    And the power of a passionate Corsair 850W 80 + CERT (I know this is perhaps an exaggeration, but I can update to motherboards in the future to run two SLI cards and do not want to upgrade again)

    http://www.Newegg.com/product/product.aspx?item=17-139-009&SortField=0&SummaryType=0&PageSize=10&PUR...

    I removed the side panel to check the dimensions of the new card and it looks like it fits. The only thing that could be a problem of release the cables SATA for the hard drive and hard drive because they are both plugged into the two slots, I don't think that the two superiors would be no problem at all. Depending on the thickness of the new card is also, it may be very close to the sound card that is spaced only a slit above the graphics card. I have another location available PCIe x 1 go back one level more that I should be able to plug the sound card in if there is no problem.

    My question is that these two will be compatible with my system? (physical limitations side)

    Also, can I change which SATA plug the hard drive and disc plug in, without having to reformat? Is it just unplug and plug in the new housing? (setting power off + unplugged of course) Basically passing SATA0 and SATA1, SATA2, and SATA3. Or do need to be filled in order? (0 then 1 then 2, etc...)

    Finally, If I can't move the sound of a standard card, do I need to do anything other than the physically move when the computer is turned off and unplugged?

    Any help is appreciated, thanks!

    John

    jkalbin,

    You have thought through all scenerios. Move the sound card does not any problems. The hard drive should stay in header SATA 0.

  • Adobe Camera Raw 7.4 or 8.7.1 will work with Adobe Photoshop CS 5 version 12.1 x 64 bit on a Mac OSX version 10.7.5 Lion.I'm having differculty opening Raw RAF files on camera Fuji X100s.Many thanks for your help there.

    Adobe Camera Raw 7.4 version later version 8.7.1 will work with Adobe Photoshop CS5.5 extended version 12.1 x 64 bit with Mac OSX

    10.7.5 lion. I cannot open raw files RAF on my newly acquired X100S Fuji camera. Thank you very much

    With this version of Photoshop, the latest version of Camera Raw, you can use is 6.7. If the update of your Photoshop or by subscribing to the creative cloud is not an option, you can then use the free DNG Converter provided by Adobe. The latest version of the DNG Converter is 8.7.1. I'm not familiar with the Mac OS, so I'm not sure if your OS is compatible with the latest version. You can download it and try it.

    Adobe - Adobe Camera Raw and DNG Converter: for Macintosh: Adobe DNG Converter 8.7.1

  • InDesign CS5 will work with MacOS Sierra?

    Has anyone tried to see if InDesign CS5 will work with MacOS Sierra? I have creative cloud and CS5 on my machine, but due to some of the things that I have to work that only work with CS5 to CS6 I have to keep my old software. I hesitate to upgrade to Sierra until I know if InDesign CS5 will work or not.

    If anyone has tested this, I would be recognizing the return flow, thank you.

    It really depends what you do with it, and a large part of the framework has changes in the operating system for how the application is designed to run in. Your workflow can cause problems when the application works for others or you might be able to use it, but keep in mind has more no support for CS5 Adobe or Apple, so do not expect to solve any problems that you can discover.

  • It will work with former apple TVs remote?

    I just wanted to see if this new remote will work with previous Apple old tv. Anyone know? Thank you

    N ° the older Apple TV does not work with the new type of controller.

Maybe you are looking for

  • New iPod touch - how do I know what generation is it?

    I just bought an iPod touch 32 GB new (color gold) and want to know what generation it is before ordering an online deal.  How can I find out the generation?  No model or serial number apparently...

  • My recovery CD does not work, says bad Machine

    I have a recovery CD that I used throughout. I used this CD before, but now when I try to use it it gives me the error message bad camera. I took it for repair and after that hats when I started having this problem. Am suspecting that they installed

  • pasword

    Hello again how toopen the blockdiagram password That's if we do not want other people to see my giagrm block how can I insert a password? I saw a few vi which have these options thanks a lot Thank you

  • 64(c) KB970892 installation error code

    whenever it installs get a message that failed

  • HP G72 laptop: hp Go mobile CD/dvd does not

    My laptop HP G72 has to a cd/dvd player that does not read inserted DSK. OS: Windows 7 Home Premium 64 bit' product number: XG988UA #ABA. Serial number: [Personal Information deleted]. This drive worked until about two months ago, but now does not re