Thotkey failed error

How do I solve this problem

Wow!

A large amount of details! :)
OK just kidding

But do you really think that someone would be able to help you if you post only: + Thotkey, failed, error how to solve this.

Perhaps you could post details on your laptop model, operating system installed, the error message, etc.

Tags: Toshiba

Similar Questions

  • THotkey failed on Satellite Pro A120

    I have a portable Satellite Pro A120SE Solo T1350. During startup, I get an error message "THotkey Failed error code: 0 x 00031402, 0x00000002". Forums, I understand that I must uninstall the Toshiba Hotkey utility and download a new piece of software from the Web from Toshiba site. Only problem is that I can't identify my model or a piece of software needed on the Toshiba site. Can anyone help please?

    Hello

    It might be a good idea to post here, everything on the forum which is on this small silver sticker on the bottom of your machine.

    There are all the necessary data that you get the drivers of your need. So just after things and maybe we can do something. ;)

    Welcome them

  • 'Thotkey' failed

    I suddenly started up the following message to the start-
    Failed to retrieve the "Thotkey. Error code 0 x 0031402, 0 x 00000002.
    Can anyone advise me on the corrective measures please.
    concerning
    Geraint

    Hi Geraint,

    Thotkey.exe is the utility responsible for controlling the actions of the "keys" on Toshiba laptops.

    I would recommend that you re-install the utility 'key hoy' CD tools & utilities or by downloading the correct version for your laptop from the Toshiba web site downloads section.

    HTH

  • iPhone more outgoing 6s "Call Failed" error - network Airtel

    Recently, I brought the iPhone 6 s more than the United States and use it in India Airtel network. Since the last 1 week or two, I guess that since the time he had an update iOS 9.2.1 I started to have this "Call Failed" error whenever I tried to make outgoing calls. This happens all the time, but sometimes only. When it happens that he does not make outgoing calls for at least an hour or more. Ultimately some how outgoing calls start working again on its own sometimes and sometimes it starts to work 10 minutes after the function "reset all settings". I checked with Airtel carrier several times and they have confirmed that no problem with the network. I put Airtel myself another SIM card in the iPhone, and even this sim did not work during down time. At the same time, I put my sim card into another Android phone, and it works perfectly without a sim card. This leads me to believe that there is a problem with the hardware/software phone itself and not any problem with the carrier. Anyone had any permanent resolution of these intermittent failures?

    Try resetting your device. This will not erase your data stored on that device.

    • Press and hold the sleep/wake button
    • Press and hold the Home button
    • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

    Alternatively, you can go to settings - general - reset - Reset all settings

    Restore your device to factory settings. Please note that this will delete the data on your device.

    Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

    If these steps do not work, contact Apple and ask for help. Maybe it's a hardware problem.

    https://www.Apple.com/support/iPhone/contact/

  • Check read the code 0000 T500 failed error even with a new hard drive

    Hello

    My T500 was slammed very hard one day, once I reboot, he worked for half an hour and gave up. I tested via the BIOS, he gave me code 0000 read failed error check.

    I presume that the HD is dead, inserted an a healthy Interior and works very well for a few hours and give up once again, tested by BIOS gave me the same error code.

    I was wondering what problem could be?

    best,

    Sy

    Yuanshi wrote:

    I presume that the HD is dead, inserted an a healthy Interior and works very well for a few hours and give up once again, tested by BIOS gave me the same error code.

    You can also prove that it is a SATA interface error by testing two hard drives in a box USB or Firewire. If you can live without portability, then perhaps this is also an option to use the T500 in the future.

  • Outlook express - section server failed, error Ox8OOCCCOE - can it be fixed?

    When I try to send or receive mail through Outlook Express it says connection to the server has failed - error 10060-ProtocolSMTP Socket, Port 25 secure (SSL) Yes-Error 0x800CCC0E anyone have an answer?

    1. This account has already worked?
    2. Please post any error message in its entirety. You can left click on it to highlight then right click to copy and then paste in this thread.
  • KB973475 failed, error = 0 x 80070643

    KB973475 has figured on the list of updates for the installation of the yellow shield several times and it always fails.  This msg is out of the log file. "WARNING #: installation failed, error = 0 x 80070643 / 0x0000057A ' maybe I don't even need it?  I get failure for KB974554 too.
    I am running XP sp 3 on a Gateway desktop computer.  Thank you, Kenny S.

    See the section "How to get help" of http://support.microsoft.com/kb/973475

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • My icon on the bar at the bottom that says "updates are ready to be installed" I click on it. Comes up saying download failed, error 0 x 643

    update fails
    error code 0 x 643
    Retry and still does not work

    See the following article:

    When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
    http://support.Microsoft.com/kb/923100

    See you soon!

  • Vista SP2 Installation fails (error 800706BE Code) via Windows Update

    I am running Windows Vista Business (32-bit) SP1 and I noticed that Vista SP2 is available for download by manually checking in Windows Update last night.  After having seen that it is a large download (more), I started the download, left my PC and left the House.  When I got home, my screensaver was away and when I attamped my password to disable the screen saver and see where I was in the process of updating, my password did not work.  Then I did a hard reboot but then could not connect under my admin user account.  I've then logged in as my wife (standard user - no password) and went to Windows Update where I noticed that the SP2 for Vista Installation fails (error 800706BE Code).  I spent most of last night and all today so far tried to solve this problem.  There are several problems here... When I click on "Install" in Windows Update, I get a message of "is not necessary: 1 update" (even when I look in the installed updates it says that the update failed).  If it is not necessary, then why is it listed as an important update that must be installed?  Endless loop... In addition, I'm not a password reset for my connection because I have a password saved on a flash drive.  Then I tried using all the older passwords that I remembered and none worked.  Shift caps lock was not on either.  I've logged in as my wife, went to the Microsoft Download page and eventually find the link to download the standalone version of SP2 Vsita, but after downloading the massive file, I didn't have the right to install it because I can not connect as an adminstator!

    (sigh) Can someone please help with this?  Thank you

    Naveen,

    Thank you very much for your suggestions!  Your suggestion of restarting, press F8 and choose "repair your computer" worked.  I was able to do a system restore and I chose a date where my old password was still in use (I had just been invited to change a few days before I tried to download Vista SP2).  In addition to losing my cookies and automatically complete IE8 - everything is back to normal.  I have not yet tried a 2nd try to SP2, and I'm very hesitant to do it now!

    Thank you once again!

  • Restore failed - error code = 0 x 241

    I'm trying to fix Acer Aspire 5552-7803 friend and ended up having to order a set of recovery disc for $20. The problem is that when I try to launch the restore of the default factory, he charges through the first two recovery disks, then on the third, I get an error message that says "restore failed - error code = 0 x 241 (WIMApplyImage impossible to apply the image: Windows cannot verify the digital signature for this file.). A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or that could be... "The rest is obscured by the box and you can't scroll to read.

    I've read several posts that say they had the same problem, but have yet to find a real solution. I completely cleaned the disk and did a 'Clean' on diskpart with a Win7 repair disc. It is possible that the disc is damaged, but with the accounts that I have seen, I would not buy a new drive and then find out that the drive wasn't really the problem.

    I could really use some suggestions. Help, please.

    Thank you

    I think I finally found the problem. I tried to install an evaluation version of Windows 8 and got a slightly different, but the similar error message and google it. The first instance of the problem that I found was a solution, saying that the guy has discovered that he had a bad memory stick. I removed one and retried the recovery disks and it always failed. I swapped the memory stick and tried again, and now I'm almost finished with the full reload. I think that was the problem and I'm hopeful that we're back in business... Now to make shopping for memory.

  • Once a day, I lose all network connectivity on my Windows XP SP3 laptop. When I try to ping something I get this error: "PING failed, error 1450' code"

    Hello, those in about 3 days, I lose network connectivity on my laptop with Windows XP SP3. When I ping no matter what page of the console I get the following error message: show PING failed, error code 1450. I tried to use the option of repair in my area, but it did not help. Computer restart resolves the problem, but I'd like to avoid doing. What should I do to solve the problem?

    original title: loss of network connectivity

    Since this happen in two different ISP, try to reset your modem or router and also contact your ISP support. Some ISPS will set a rule and limitation of their user, but in your case, discuss it with your ISP, or contact technical support for your PC manufacturer.

  • Update for Windows XP (KB2567680) security has failed - error Code: 0 x 80070003

    Security update for Windows XP (KB2567680) failed - error Code: 0 x 80070003 I tried to install update 3 - 4 times but it continues to not be updated, can someone please tell me what to do.

    You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
    http://support.Microsoft.com/kb/910336

    When you search for available updates on the update site, you see the Error 80070002 0 x or 0 x 80070003
    http://update.Microsoft.com/windowsupdate/v6/showarticle.aspx?articleid=17&LN=EN&IsMu=false

    Error message when you try to download the updates on the Microsoft Windows Update Web site or from the Microsoft Update on a Windows XP computer's Web site: "0 x 80070003".
    http://support.Microsoft.com/kb/916248

    Some have had success with

    1. stop the service automatic updates, clear the contents of the DataStore and Download folders and restart the automatic updates service.
    Stop the automatic updates Service.
    Click Start, choose Run, in the run box type services.msc.
    Click OK.
    Right-click the automatic updates service.
    Select Properties.
    Under Service status, click on stop.
    Click OK.

    2 remove the contents of the DataStore and Download files.
    Click Start, choose Run, in the run box, type %windir%\SoftwareDistribution
    Click OK.
    Delete the contents of the DataStore files so download

    3. start the Service automatic updates
    Click Start, choose Run, in the run box type services.msc.
    Click OK.
    Right-click the automatic updates service.
    Select Properties.
    Under Service status, click Start.
    Click OK.

    This procedure will erase your history on the Windows Update Site.

  • What is PXE - 61 media test failed error and the error PXE - MOF? What is the solution for this error? It's a lenovo with windows desktop

    I have a lenovo computer. I began as routine but unfortunately it says error:-what is media test failed error PXE - 61 and the error PXE - MOF? What is the solution for this error? It's a lenovo with windows desktop computer? How do I prevent this.

    Kala

    Hello Mohan,

    ·         You did changes to the computer before the show?

    These errors often occur if there are incorrect BIOS (Basic Input\Output System) settings.

    Method 1: Check if the computer startup options are changed in the BIOS. You can set the hard drive as the first boot device. In addition, make sure that this option "Wake on LAN" or one similar to it is off.

    Method 2: Load default BIOS (Basic Input\Output System) settings, and then restart the computer.

     

    Important : Change/update BIOS can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.

  • PING: transmit failed, error code 5.

    Hi chris,

    I also have similar problem like this.  my network connection is ok & its working fine, but I'm not able to ping giving following error

    C:\>ping 192.168.1.25

    Ping 192.168.1.25 with 32 bytes of data:
    PING: transmit failed, error code 5.
    PING: transmit failed, error code 5.
    PING: transmit failed, error code 5.
    PING: transmit failed, error code 5.

    Ping statistics for 10.22.22.1:
    Packets: Sent = 4, received = 0, lost = 4 (100% loss),

    C:\ >

    And disconnect it from the network showing connection

    error display:-connection stetus: unknown "the dependency service or group could start.

    When I go to start 'network location awareness' serivece in error 1073741288.

    In all this I have network surfing condition smoothly. but not able to connect to the local network % showing ping disconnect on the taskbar.

    Help me please to this problem...

    Patricia

    Hello Patricia,

    Thanks for posting your question on the Forum of responses of Micrsoft.

    I don't know exactly the question that your question was separated from the previous thread.

    What you ping? Another computer on your network? You are in a domain environment?
    Are all the computers on your network, Windows Vista or Windows XP?

    One thing, you can check to go in the registry.

    1. open the Start Menu > run and type regedit and press the Enter key

    2. navigate to the following location
    HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Control/Lsa
    3. Locate the restrictanonymous key

    4. double-click on the key, set the value to 0 and press OK
    5. exit the registry and restart your computer for the changes to take effect.

    If please reply back and let us know if this helps with your error.

    Thank you

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Update for Windows Vista Service Pack 2 (KB948465) repeatedly fails - error Code 80246007

    Update for Windows Vista Service Pack 2 (KB948465) repeatedly - fails error Code 80246007.  BITS ok - Microsoft 'Fix' detected 'problems' and 'fixed '.

    them, but the update continues to fail.  Any help would be appreciated.

    Hello

    Perform the steps from the link below and see if it helps.

    How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

    Hope this information helps.

Maybe you are looking for