Designjet T2300: Error 59.3 Designjet T2300

Similar Questions

• DesignJet T2300: 09.6:10 error code

  Could not find this error. Anyone know what it is?

  Hello

  The error means that one of the CIS is faling.

  CIS E to be exact

  Try reseating the cable, if you still have the problem, replace it.

  Here is the part #.

  Element CN727 - 69010 CIS - located under the glass plate - for Designjet printers

• DesignJet T2300 firmware update error

  When you try to update the firmware I get the error message: manifest of updating the Firmware file does not.  The firmware update was interrupted.  Firmware version is IG_02_00_15.1

  Any suggestions?  (just unboxed this plotter today!)

  Never mind... set to update to the latest firmware using a USB key instead of the network.

  All right.

• HP Designjet T2300 PS printer: HP Designjet T2300 gas station problems

  I work for a small engineering firm. We have owned a large scale printer Postscript HP Designjet T2300 plotter for about five years. We rarely have problems with it, but a few days ago, we started to have problems with the service stations of the tracer. Whenever we turn the plotter hear us a loud clicking noise coming from the area of the station.

  We initially received error code 21.2:13. I contacted HP support and they had me run diagnostics on the service station. They returned with the error code of 21:13. I was told that I needed to replace the service station.

  I disassembled the side cover right to access the service station. When you turn on the plotter, as it has gas carrier station inializes goes ahead all the way and continues to click. I got out the service station Assembly and disassemble to see if I could fix it. Badly cleaned ink necessary spittoon & one of the metal clips used to stop the carrier to move too far to the front had popped out.

  I've cleaned all the ink level and I replaced the clip. I reassembled the Assembly and reinstalled in the plotter. After the reboot, I can still hear the rattling noise. The motor that moves the carriage of station service before doesn't seem to work properly. It does not stop when it reached the front of the gas station. She continues to advance the carrier and click on gears.

  Is there a sensor or something built that is supposed to stop the carrier to service station when it is moved to the front as it has supposed to go? Is my only option to replace the entire service station?

  Thank you!

  Hello

  If there is a click on the service station, provided is because a part broke.

  Your best option is to replace the part number

  CH538-67040 gas station - includes the fall detector and the spittoon of station service

• Designjet T2300 product CN728A: could not install Designjet T2300 mfp firmware

  Hello.

  I tried to upgrade the firmware to the Designjet T2300 MFP (CN728A).

  I tried with: network, usb, thumb stick.

  It does not at all.

  The current firmware is: IG_02_00_15.1 and I want ot update at: IG_09_00_00.4

  Should I update to the previous firmware: IG_06_00_00.2, first?

  Yes, try the update to firmware IG_06 first before the update of the firmware IG_09.

• Factory\HARD reset HP DesignJet T2300

  Hello! I have HP DesignJet T2300 with lost password. How factory\hard reset this device or enter the service menu (I hope, hard reset is in the menu)?

  If you click on the key icon and scroll to service mode, enter 3174 and scroll to reset access control.   I hope that this resets the password I've ever had to try before.

• DESIGNJET T2300 STUCK at 94% during initialization

  HI, my DESIGNJET T2300 STUCK at 94% during initialization. Anyone know what I can do to make it take off?

  Here's something that might work. Remove the loaded paper. Remove all the ink cartridges and print heads. Now, turn on the printer and see if it get to the place where it asks to install some of these supplies.

• Problem copying with HP Designjet T2300 PostScript CN728A

  Someone at - it an idea on why when the printer above comes out "sleep" mode, trying to copy anything the printer will produce a block of black ink A3 size.

  If you stop the copy job, perform a new analysis the document it prints normally.  It seems what happens when coming out of sleep mode.

  Ideas everyone.  Firware is to date.

  Image attached as an example.

  

  Hello tomsocr

  The HP Designjet printer product series is commercial printers and it's HP consumer forums. As such it is there not a lot of users familiar with printers Designjet (hardware or software). I suggest you post in the HP Business Support forum for a better chance to find a solution.

  You will find the Designjet Commercial Council here.

  http://h30499.www3.HP.com/T5/printers-Designjet-large-format/BD-p/BSC-414

• Designjet HP T2300: T2300 no magenta

  Magenta fades gradually in printing. After reset and aligning the printheads magenta appear for one or two runs then fades. Same thing happens when copying and printing.
  
  I tried 2 new printheads without result. New inks as well.
  
  Magenta appears on the impressions of calibration and internal test print.

  Hello

  Try to replace the print head and ink cartride again.

  If they are under warranty, call HP for replacement.

  If you still have the same problem, you may have problems with transport. Contacts of Flex and transport FCS.

• Designjet T2300 CN728A of product: designjet t2300 freeze when loading paper

  Hello.

  When we pass the rolls of paper, #2 roller #1 rollers, it loads the paper roll #1, long (1.5 meters) and the display freezes at "loading the roll #1. Nothing else happens, the screen is it freeze.

  To get out of the freezing, I opened the #1 roll cover and close it.

  If I unload roller #2 and use one roller #1, it works fine.

  Does anyone have an idea about the problem?

  I tried to upgrade the firmware IG_09_00_00.4 and iget the message that the file is not correct (I don't remember the exact words), or that there is not enough space on the hard drive.

  The plotter have now: IG_02_00_15.1

  Should I upgrade first the previous version: IG_06_00_00.2, and then IG_09_00_00.4?

  either version: MU_01_02_32.6?

  Thank you.

  Hello

  Update to IG_06_00_00.2, then IG_09_00_00.4, as you mention.

  Then test the only printer support.

  Disconnect the printer from the network

  Print the demos from the front panel or copies made him take the paper from the printer control panel

• Designjet T120: HP T120 error BA7F11E0 designjet

  We have a HP designjet T120 when power on/off, this (BA7F11E0) error message appears on the screen immediately.  No movement of transport or initialization is performed. Just the error and nothing else. Pls help.

  Thank you

  Hello

  Try to isolate the printer, remove the printhead, inks, connectivity cables and turn on the printer.

  If the error persists, it may be a problem with the APC hand.

  Best regards

  Mike G

• Designjet t125: designjet t125 blue screen error B332347C

  Hello.

  I was ask to get this error:

  When you feed the plotter that blue screen appears with this code: B332347C

  I can't find the service manual for this, if anyone can help me?

  HELO try this solution
  You need to replace hp designjet encrypted t520 chip on the motherboard inside the plotter
  You can buy it on ebay http://www.ebay.co.uk/itm/HP-Designjet-T520-Blue-Screen-Error-Solution-Encrypted-chip/282223353841

• HP Designjet T1300 error 08:04

  Hello!

  I have a T1300 Designjet, a few years old (2010 I think) and I have printed a few rolls of paper on it. (5-6)? There are a few firmware updates he has begun to show 08:04 error message. He asked me to update the firmware, if the problem persists (does it well). I have the new firmware (?) IG_04_00_05.2.

  Sometimes I have to reboot 10 to 15 times before I can print. Sometimes it goes to error if I don't use pace for an hour or two. Sometimes he goes to error in the middle of printing, or just by turning or when ever. Sometimes it starts immediately and I can print all day with no problems.

  Any ideas?

  Now, I checked again for the new firmware. the printer says there is new firmware, but he went to 08:04 error mode in the audit.

  Now after 4 restarts, the printer started to install the new firmware. at the end of the installation program stops and when restarting, the printer starts at 08:04 mode.

  Restart the printer again and again. Allways 08:04 code. What is 08:04 code means?

  OK... updates history:

  Today first MS_01_01_23.1 was installed and after this IG_04_00_05.2.

  No newer firmware available.

  I will update this if it doesn´t enter the error mode more...

  Today, I finally had the time to print again. The T1300 always happening in error mode 08:04.

  Help!

  I've never seen an INVERTER causes a hardware failure, but I saw them will interrupt power.  I unplug it and try it this way for a test.   Can you connect a computer directly to the printer without going through your network and see if it starts and prints normally then?

• DesignJet 5500: firmware update error

  The firmware on my printer is: S.03.12D

  I went to this URL:

  http://h20566.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=82219 & swLangOid = 8 & swEnvOid = 181

  and downloaded the firmware under Windows 2000, even if I have Windows 7 64 bit on my computer because I thought that the firmware was just download to the printer, so it should matter what OS is on the computer.

  I downloaded S.56.07 February 3, 2009

  I downloaded the firmware to the printer file and it improved up to 97% and then gave the error message below.

  An unexpected error has occurred. Make sure that the firmware you are using is a valid firmware file.

  I have a Designjet 5500 and I went from dye in ink UV, if that matters.

  The printer seems to be ok, but it would be good to know how I can upgrade the firmware.

  Yes, a connection between the computer and the printer is recommended.

  Version of the OS is not the problem here, but exact number of the product will make a difference, so please use the actual peripheral product number.

• DesignJet 5500: print head print test very good page, but I still get the error message to replace the printhead

  On my DesignJet 5500, I rswitched the ink tubes, printheads and printhead cleaners dyeing anti-UV, 81 to 83.

  I got an error message saying that the black print head needed to be replaced so I bought another head black printing and after that, I was able to print a test page that shows all the colors (image quality page?).

  Magenta not give not any code of error before, but now I get an error message saying that the printhead magenta must be replaced, even if magenta print well on the printed test page.

  Hello

  The printer give you a warning when the health of the print head is low, but it will continue to print.

  If the problem has been solved after all print head replacement can be that a print head cause others to fail

  Or, just a few bad print heads