Thumbnail at the bottom of the PC got blurr! Need help

Similar Questions

• all the deleted variable envoirment need help

  all the deleted variable envoirment need help

  Hey Hamid,

  I suggest you perform a repair of the system. Followf operations from the link provided and check.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212?WA=wsignin1.0

  Important: Remember to backup all important data before doing the repair.

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• Windows 7 64 bit worked very well and when was time to save I get the cyclic redundancy check, I try several times and made the same thing I need help please

  worked very well and when was time to save I get the cyclic redundancy check, I try several times and made the same thing I need help please

  Hello Hans,.

  Thanks for choosing Microsoft Community!

  According to the description of the problem, you have problems when you use the backup on Windows 8 feature.

  Please answer these questions to better understand the issue and help you:

  1. are - what you're talking to backup and restore functionality on Windows 7?

  2 have you made any changes to the computer before the show?

  It is perhaps to cause bad sectors on the hard drive, run the disk check to repair bad sectors

  Check your hard drive for errors:

  http://Windows.Microsoft.com/en-us/Windows7/check-your-hard-disk-for-errors

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  For more information:

  Backup and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions

  Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

• My hp s3321PC Virginia-PC on safe mode and has been hacked, I don't have the recovery CD, I need help to restore at least it ' s factory settings. Thanx

  My hp s3321PC Virginia-PC on safe mode and has been hacked, I don't have the recovery CD, I need help to restore at least it ' s factory settings. Thanx

  See the manufacturer's web page for detailed instructions on 'Factory Restore'.

• I am trying to download Adobe premiere pro cc 2015 but it just says: error writing to the location of the temporary file, I need help!

  I am trying to download Adobe premiere pro cc 2015 but it just says: error writing to the location of the temporary file, I need help!

  Clear your temp and tmp directories.

  Close your cc desktop app and restart as admin (win) or root (mac) user.  Next, install your cc applications.

• The latest version of Lr does not work with the last WIN10, I need help

  The latest version of Lr does not work with the last WIN10, I need help

  Finally I understand it by putting at level c ++ Redistributable Package, surprisingly it works. Anyway, thanks for your answer...

  Good day!

• Hi Mr President, last week I have a crash on my computer. Yesterday I installed PSE12... but I can't open the program, please I need help/support for this. Thanks a lot for helping me, Roland

  Hi Mr President, last week I have a crash on my computer. Yesterday I installed PSE12... but I can't open the program, please I need help/support for this.

  Wath can I do?

  In the box: PN 65224809, product key 1057 -.

  Please can you tell me wath is you solution?

  Thanks a lot for helping me

  Best regards, Roland Cuypers

  [email protected]

  Post edited by: Sandeep Singh removing serial number

  Hi rolandc65772962,

  Sorry for the inconvenience. Please provide us with the complete error message you get.

  Kind regards

  Sandeep

• I can not restore all the missing profile I need help and I want to reinstall my firefox browser

  whenever I installed the firefox browser app and once installed it say cannot load the missing profile I do not know what to do and want to installed my firefox evil bowser and I need help please and thank you.

  Hi, see How to run Firefox when your profile is missing or inaccessible and let us know how its going

• Need to view daq reads per second but only to record a reading every 10 minutes. I would also like to record the date and time, at the same pace. Need help

  Need to show daq reads per second, but only to record a reading every 10 minutes, need help

  You are also looking to taste to 1 Hz data acquisition?

  My approach would be to use the DAQ acquisition to time your loop display reading each acquisition, then use the loop counter to control the logic of your writing to file.  For 1 Hz and 10 minutes write I would use 'quotient and remainder' I / 600; If rest = 0, then write the data point.

  For the date and time, under Calendar palette use the time get in seconds food a DateTime Format to a string.

• I forgot the password of admin, need help. (unique number)

  I have a problem with my computer. I have access to a guest account, but the account admin I need to access an administrator account on my computer, I have a guest account and I have access to cmd, but I cannto run administrative.

  I also use an ibuypower drilling rig. If the spamming f8 does not bring in safe mode. They have their own menu f11 but I don't know how to operate it.

  Can someone help me get into the hidden administrator account or recover the password of my account admin? Thank you.

  Hello

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  http://support.Microsoft.com/kb/189126/en-us

  Tools third password

  Some third-party companies claim to be able to bypass the password that have been applied to files and features that use Microsoft programs. For legal reasons, we cannot recommend or endorse any of these companies. If you want to help to break or reset a password, you can locate and contact a third party company for this help. You use these third-party products and services at your own risk.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• Having a few issues with the functionality of Windows, need help.

  The question I want to have all started with Windows media player, it kept giving me an error whenever I tried to say something about some dll and she had to be reinstalled so I went in the programs and features Panel and took office and uncontrolled Windows media player in the media tab. I restarted my pc and when I am returned to features to reinstall media player it gave me an error message indicating an error has occurred. Not all features have been changed. Well, I restarted my pc again and it says failure configuration windows updates, returning to the changes before the logon screen appears.

  He did exactly the same thing every time I try to get media player back, gives me this error and is unable to set it up. Need help please, I'm frustrated and don't know what to do as I use media player as my default player. I'm running Windows 7 Ultimate x 64-bit with service pack 1 installed.

  (Moved to programs)

  Personally, if Id had malware on my pc, after a clean analysis Id make sure pictures of data, documents, etc. are saved.

  After that, you can try creating a new account admin test, and if it leaves you then try to install WMP for this account.

  With some malware is hard to know what that its alteration, but it sounds like it may have fiddled with your security access settings.

• No index on the primary database. Need help with "COUNT OFF"; option

  11 GR 2 11.2.0.3 under linux

  Hi everyone,.

  It's an honor to be with you guys.

  I have a big question here and I am unable to decide on a permanent solution.

  We have a primary database that is configured to have a logical expectation.

  The logic of the day before was not built by me. But I'm now support...

  So as the title suggests, there is NO primary index / unique + not null on a large number of tables in the database of emergency primary/logic. But the application logic guarantees uniqueness values rather than null.

  Here is where the problem starts.

  Guys request DO NOT want us to create an index on the primary database.

  According to my understanding, because the database lack of clues, the apply SQL must do a full table scan whenever it changes / remove data. It is a very expensive process and consumes a lot of time. This takes hours together to apply a minute with a value of newspapers on the logic of the eve... A huge lag is created during the hours and is not acceptable.

  So as I told you earlier, the guys request do not want an index on the tables not supported.

  They use the database pending logic exclusively for information purposes and it's like production for them...

  
  Let me give an overview...

  According to the document on the creation of the logic of the day before for 11.2 as below

  http://docs.Oracle.com/CD/E11882_01/server.112/e41134/create_ls.htm#SBYDB4730

  Step 1 to find tables without identifying unique logic in the primary database.

  Query the DBA_LOGSTDBY_NOT_UNIQUE view to display a list of tables SQL may not apply be able to uniquely identify. For example:

  SQL> SELECT OWNER, TABLE_NAME FROM DBA_LOGSTDBY_NOT_UNIQUE

   2> WHERE (OWNER, TABLE_NAME) NOT IN 

  3> (SELECT DISTINCT OWNER, TABLE_NAME FROM DBA_LOGSTDBY_UNSUPPORTED) 

  4> AND BAD_COLUMN = 'Y'; 

  The above query has 1040 tables in a particular schema. All the these have no index is not null primary / unique.

  
  Now according to the step 2 as below, we have an option to add a disabled RELY primary key constraint.

  Step 2 Add a disabled RELY primary key constraint.

  If your application provides the rows in a table are unique, you can create a primary key disabled RELY constraint on the table. This avoids the overhead of maintaining a primary key on the primary database.

  Can someone explain what this RELY constraint is disabled and how to function and help please?

  
  I have a few questions about the constraint to RELY.

  (1) change current plans of optimizer on primary for the execution price?

  (2) can help to boost the performance of SQL apply without creating index on the logical standby database?

  (3) it will change current plans of optimizer logical pending for the SQLs running?

  What are the options that I need to increase the performance and table scan complete engine AVOID SQL apply on the logic of the day before?

  Thanks a ton for reading my post.

  
  Kind regards

  Abhishek

  In fact, I've implemented a key primary rely disabled on primary and unique index on the logic of the previous day.

  The logic of Eve runs lightning fast now

• Remove the scaling of fonts - need help with FindChangeList.txt

  First the whole question: is there a utility or a method that will allow me to convert a saved query F/c the kind of writing required by the FindChangeByList.jsx script?

  As:

  text

  {"findWhat: '-'"}

  {"changeTo: '" ^ = "}

  {includeMasterPages:true, includeHiddenLayers:true, includeFootnotes:true, wholeWord:false}

  Find out all the space-dash-space and replace it with an en dash.

  (It comes just to refresh your memory... in fact, it is not the text string I need to help, but find/changes formatting.)

  I need a quick way to go through a document and remove any instance of glyph local scale or style. That is, to turn again to 100% horizontal and vertical. This is necessary for the correct exit to EPUB (fixed provision).

  A script would be great, but who, a way to write about this kind of implementation in the form of instructions to add to FindChangeByList.jsx would serve me well in the long term, as I have other similar types of doc-all of the formatting I often need to make default

  Thank you

  AM

  For your first question, you can use the find/replace registration script...
  http://InDesignSecrets.com/find-change-scripting-goodness.php

• Change the advanced title (I need help)

  OK, so I'm working on a project of my own and need help. I know how to see through title so that only my title shows through the text shows my video but now I want to take this title with the below video and put that on top of another video clip. So for those who do not follow:

  Clip 1 to see through text, but you can't see the video under the title of the text. Now how take clip 1 with title and just the title with 1 under the clip on another clip of overlay?

  I hope that makes sense... I don't know if there is a specific name for this action, but I'm completely new to first adobe and I'm trying to understand this

  put a matte key track on your video, then assign the text above it matte. See if that if what you are looking for.

  -Bob

• I am angry and disappointed in the Canon. I need help. ix6820

  Just got my ix6820 so I could print the newsletter 11 x 17 my Mac. There is no mac os x software or drivers in the box or on the canon Web site. There are drivers for the ix6520 and the ix7000 but not the ix6820 so I can not get the printer installed on my iMac. I then proceeded to open windows on the parallel to try to install it there just to try to find a workaround and be able to use the printer. No luck. The software would not install without error message. Then I go back to the site Web of guns for windows drivers and there is none for this printer and windows. Again, I found the drivers for the other two printers for windows, but not the ix6820.

  Of course the gun isn't a big enough company to have technical support open on weekends I guess which is ridiculous for me, so I have to wait until Monday.

  If anyone can guide me through the installation for my mac os x or point me in the right direction, I would be really grateful.

  Here's what we understood. The printer is new and has not been published officially Canon again. They were delivered to stores and shops have begun to sell them before they were supposed to. Once I got through a CSR, he had me go to the replacement site guns were all the drivers and software.