Thunderbird does not shorten hot on the windows of the box.

Similar Questions

• does not check messages when the box is checked

  Spin worm TB 38.2.0 on Windows 10. A check to check for new messages every 5 minutes in the server settings. He does not. Must hit receive messages to retrieve new messages. How can I fix it?

  Matt. I solved the problem by returning to the 38.1 version. Must be a bug in 38.2. Thanks for your thoughts.

• Why Firefox 4.0 does not save passwords even the box is tigged?

  I installed the version of Firefox 4.0 yesterday for the first time. He did not transfer the passwords from IE, only bookmarks. Icuold yesterday save a password, but it doesn't today. When I want to save the password, Firefox don't ask even on this subject. Tool box / Options is tigged. I even tried to take the tigg far and swichts off the Firefox and after you start then putting the tigg in the box, but it did not help. What should I do?

  • Take a look at your Options > privacy > history
  • Make sure that you do not choose "never remember history".
  • If you choose "Use the custom settings for history", make sure that "Permanent Private Browsing Mode" is unchecked.

• CC does not right out of the box.

  My information system is lower in the screenshots, you will see that it grows a 7.4 healthy on the WIE.

  

  
  

  
  

  I have been using more Creative CS5 for 5 years and never really gave me any problems. Its working on my system almost perfectly and the ONLY reason I chose to bite the bullet and download the CC was because I was looking to buy Red Giant plugins. These plugins are more supported at the level of CS5.  Since the download and use of CC last Thursday (today is Saturday) I still have the second error messages the software has been opened. The LAG in Premiere Pro is so bad its unusable (same project in CS5 works perfectly and a new project to create CC has the same problems with lag, Audio and video clock synchronization error Messages)

  
  

  
  

  After effects continues to plant, launch error messages and close without warning. I get the error messages for the fonts that are not yet on my system. (See images) This was a serious waste of my time and money on the last 3 days I can't win back. Below are screenshots showing the error messages.

  
  

  
  

  I spent several hours today only reading the forums and realizing I'm not the only customer to have questions and problems with the CC are very deep. At one point AE could not create a single solid layer without crashing.  Ive rebooted a dozen times and check updates, reinstalled software twice, makes no difference.  Its just taken space upward on my system at this time.

  
  

  If my CS5 works without a hitch, I expect to do the same CC. I'm not a fan, I produce for a living, and so far I've lost my weekend by ensuring that this forum works for Monday morning. Frankly, I'm on the point that I do with CS5 and not even give CC a thought.

  I NEED to hear back from an official of Adobe to get as this resolved quickly with a patch of any shape, or refund for my purchase.

  Thank you

  Christian

  It ended in a session long frustrating distance of 4.5 hours on my system, then a full refund of the amounts spent on CC. Adobe has not given a cr * p on the hours I lost production during the last 5 days. Shame on them. I will not continue or recommend their products more, and I'll look for alternative software that works.

• I have Photoshop cc 2014 but do not get access to scripted models. Ive just updated, but it does not always appear in the box to fill patterns. Anyone know why?

  Although I've just updated my cc photoshop I don't not scripted options model-someone ' one can tell me what could be the reason?

  You do not speak the most recent as the tree, flame and a framework? They moved to the filter > render in the menu bar.

  EDIT: Mark Gene as correct if that was the case. It took him until I did it.  xD

• Thunderbird does not connect with the server

  Another recent problem is Thunderbird does not connect with the server. I don't know if sent mail will go out, but I know I'm nothing receive. My internet connection works well for FF or another browser. I checked my settings and they seem OK. I checked the default settings in Win10x64 and they are correct. Any ideas?

  Although windows 10 is new for us all. How do solve you. I have other solution with very similar issues.

• Thunderbird does not work, but can not be uninstalled to allow the re-setup

  I have recently updated Win10 but now back to win8.1 Thunderbird does not work (the version is 24.5.0) size of the program is 48 MB. I can't access to the program and it does not uninstall using the uninstall feature. Any helpful suggestions would be welcome.

  Make a backup of your e-mail using Mozbackup data or simply make a copy of % appdata%\thunderbird\profiles.
  Reinstall the Tbird. The last of them is Thunderbird 38.2
  But if you prefer to use a former

• Thunderbird does not all files except "inbox." and against the info 'aid', there is NO 'account settings' under 'Tools' & I have the latest version of T.

  Thunderbird does not all files except "inbox." and against the info 'aid', there is NO 'account settings' under 'Tools' & I have the latest version of T. I just need to download the SENT MESSAGES, Inbox not only.

  Re: Where is 'account settings '.
  If you do not see 'Tools', then you do not have your active 'Menu Bar'.
  See picture below on the activation of all the toolbars make life easier.

  Different methods of location of the 'account settings ':
  Via the toolbar "Menu Bar":

  • Tools > accounts settings

  Through the pane of folders:

  • Right-click on the name of the e-mail account in the folders pane, and then select "settings".

  Via "Menu Icon.

  • Menu icon > Options > account settings

  Re: I need to download sent Messages Inbox not only.
  E-mail accounts IMAP see a remote view of the files on the server.
  You subscribe to view these folders in Thunderbird.
  You synchronize directories subscribed for a copy in Thunderbird.
  What you do in a folder for example imap: delete, will occur on the server, so viewing via webmail or Thunderbird folders appear identical.

  However, in your case, it seems that you have created a POP e-mail account.
  E-mail POP accounts can only connect to Inbox server and download server Inbox for the Thunderbird Inbox pop e-mail account.
  It's not a quirk of Thunderbird; This is how all Pop mail represents the work.

  There is a work around to get "sent" in the folder mail sent from server in Thunderbird. You just do it once, because when you send it through Thunderbird, it will put the e-mails in the folder sent TB pop mail account and not on the server.

  Thunderbird creates a "Sent" folder when first send you an email.
  So, if you have not yet sent an email, please send one, even if only to yourself.

  Then, move all inbox emails in the appropriate folders.
  You can create new folders to organize them.

  How to create a new folder:

  • Right-click on the name of the e-mail account, and then select "new folder."
  • Give an appropriate file name and click "create a folder".

  When the Inbox is empty:

  • Logon to the Web e-mail account by using a browser.
  • Move all emails "Sent" in the "Inbox".

  In thunderbird:

  • Click on 'Get the message'

  all the "Sent" emails must get downloaded from the server Inbox anto your Inbox in Thunderbird.

  • Then move all your emails in the 'Sent' Thunderbird folder.

  You should now have all these emails downloaded from the server and display in Thunderbird.

• folder on the external drive does not open in a new window

  on iMac OS 10.10.5, when I open a folder (by double-clicking) on an external drive, the folder does not open in a new window, but in a window that replaces the window that was opened.  I looked for a system setting that controls this (in system PREF), but I couldn't find anything useful.

  If you control - click the folder there is an option to open in a new tab. I don't know of anyway to set up in system preferences.

• One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. The location is the root (2 ports) USB hub: 1-unknown device and Port 2-not used

  Original title: USB device not recognized

  Over the last 2 weeks, I get a message on a USB device.  The message said that one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.  The location is the root (2 ports) USB hub: 1-unknown device and 2-unused Port.  I have no idea what it means.  I hesitated to first click the icon (it does not last very long) thinking it could be a scam.  Can someone help me?  Thank you.

  Hello

  (1) is the specific question of specific USB devices?
  (2) did you of recent changes to the computer before the show?
  (3) have you tried plugging the USB stick on another computer?

  (4) what is the brand and model of the computer?

  I suggest to refer to the following methods and check if it helps to solve the problem.

  Method 1: Hardware devices do not work or are not detected in Windows

  Run Microsoft Fixit mentioned in the article.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: USB Port may stop working after you remove or insert a USB device

  http://support.Microsoft.com/kb/817900

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 How to back up and restore the registry in Windows

  Reference:--

  Advanced troubleshooting tips for General USB for Windows XP problems: http://support.microsoft.com/kb/310575

• Windows XP Pro does not correctly load after the release of the Radeon graphics driver

  Hello

  I have a Shuttle XPC with Windows XP Pro and an ATI Radeon Sapphire graphics card. The entire system is 5-6 years, if that helps my raw description.

  My graphic card Radeon has had performance problems, so I downloaded ATI "autodetect tool" and he did choose the update of the driver concerned. After installation and reboot, my PC load Windows XP, but remains unused in ' grainy 8 colors low resolution version ' of my office. No icons, toolbar or whatever it is well visible. The mouse moves the pointer autour, but does not respond to clicks. The only combination of keys which gives anything is Ctrl + Alt + Delete, raise the usual options (in this case useless) to lock the computer, close the session, stop etc.

  In short, it seems that I'm not really on my desk, even if it loaded my wallpaper by default.

  'Safe mode' or "last working configuration" does not take me anywhere useful.

  How to contact with the system to at least start to change my settings for graphics cards?

  I thank very you much for any help.

  Hello

  I suggest to follow the steps provided and check if it helps.

  Method 1: How to fix a computer that does not start.

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

  More information: Advanced Troubleshooting for General startup problems in Windows XP: http://support.microsoft.com/kb/308041

  Hope this information is useful.

• Hanging Windows desktop and does not, online or off the power. I have to use the task mgr constantly to "shake" the windows to startin

  Original title: Hello I have an xp pro sp3 dell dimension 2400. Hanging of Windows desktop and does not, online and off.

  Hello I have an xp pro, sp3, the dell dimension 2400. IE 8 for the internet.  I use McAfee through my SP which is AT & T. Windows Office suspended and does not, online or off the power. I have to use the task mgr constantly to "shake up" windows start and sometimes, it doesn't work anymore and I have to restart.

  I have used all sorts of anti-virus programs and can ensure that it is NOT a virus. It is not my regestry, all updates are current. I keep a clean machine.

  I have xp of the process and have nothing wrong.

  Sometimes my icons will disappear out of my office, but always come right away. Other times, I get a message that says stop running this script. a script on this page slows down IE run slowly. It is for the most part on Face Book, BUT sometimes also on other sites, like google mail. Yahoo mail, groups and news.

  Any suggestions would be greatly appreciated.

  Thank you! :>)

  Hello I have an xp pro, sp3, the dell dimension 2400. IE 8 for the internet.  I use McAfee through my SP which is AT & T. Windows Office suspended and does not, online or off the power. I have to use the task mgr constantly to "shake up" windows start and sometimes, it doesn't work anymore and I have to restart.

  I have used all sorts of anti-virus programs and can ensure that it is NOT a virus. It is not my regestry, all updates are current. I keep a clean machine.

  I have xp of the process and have nothing wrong.

  Sometimes my icons will disappear out of my office, but always come right away. Other times, I get a message that says stop running this script. a script on this page slows down IE run slowly. It is for the most part on Face Book, BUT sometimes also on other sites, like google mail. Yahoo mail, groups and news.

  Any suggestions would be greatly appreciated.

  Thank you! :>)

  The image (it back up to an external drive as full image) and reinstall Windows XP, update, drivers and everything.  Install any plugins that you NEED to do all that you see here that the bat hurt.  If the problem no longer exists, something has gone wrong with your system from before (corrupt files or your cleaning is not as complete as you think) and if the problem persists - probably something to do with the material. In all cases, you can return to the image if you wish.

  To the extent wherever it is the registry, I must ask, * how * you have come to this conclusion?  Not that I'm defending something - I was wondering what you did to decide who is not your registry database?  (Side: I agree with you.)

  That's what * I * would call cleaning and optimization of a Windows XP machine:

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know using Google (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Windows Live Mail does not open. Contacted the help people who told me to uninstall Windows Live and start over, but my computer won't uninstall it?

  Windows Live Mail does not open. Contacted the help people who told me to uninstall Windows Live and start over, but my computer won't uninstall it? Back to the use of Windows Mail, but now some of my emails are not received by some of their recipients even if they seem to send and there is no error message. It is not a server problem, as everything goes through, if I send directly from their site. Help please.

  original title: Windows Live Mail does not open.

  Hi Fenellacat,

  Here are specific instructions on how to remove and reinstall Windows Live Mail.

  http://support.Microsoft.com/default.aspx/KB/938275

  Matt Hudson
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My Windows Update does not seem to recognize the need for updates

  My Windows Update does not seem to recognize the need for updates to the programs... This has happened for a long time. It will only recognize the updates of Microsoft Security Essentials, but when he checks the updates it points only to the basics of security. I don't know there are updates that Microsoft Updates jumps...

  msft777jf,

  Check the 2nd Tuesday of each month - later in the day. (after 10:00 Pacific time)

  06/06 / 1107:38: 16 pm

• GT Legends installs but when told to restart, windows does not start, necessary to the use of BONE repair

  Hello

  try to install GT legends on a windows 7 64 bit computer, I'm thorough possession of installation and bye the way which this has been done when windows xp was new.  then when you click the icon, it says, you must be an admin, a windows box comes up saying program runing try until a Director is regular. I don't admin and I managed to say you want to restart? I say yes, it restarts then it shows windows startup, but no flags windows or points come on the screen. (after 2 minutes) I turned off the computer by pressing the power button turn it on and I do the repair from windows thing.  and back windows to a State where I don't have GT legends.  so is it possible to install it where no joke my PC

  Thank you

  Given that the request was made when Windows XP was again, you can try running the application in compatibility mode. You can check the link for more information for more information:

  http://Windows.Microsoft.com/en-us/Windows/make-older-programs-run#1TC=Windows-7

  If that does not work, chances are the application depends on some legacy components of Windows XP, which are missing in Windows 7. Therefore, check with the developer to get a version compatible with Windows 7.