Thunderbird is locked after update. cannot read old/new messages

Similar Questions

• Server version 308 cannot read the new 318 of the repository version

  Hello
  
  I installed OBIEE 11.1.1.5, the client gave me its SPR, but when I tried to open this message appears:
  "Server version 308 cannot read the new version 318 of the repository.
  
  What should I do to open the rdp Protocol?

  You must update the RPD to the latest version using ua.bat of \OFM\Oracle_BI1\bin\

  Pls mark as correct

• Windows Mail cannot receive or send after update-'cannot find server '.

  Original title: Windows Mail cannot receive or send after update

  Use Windows Mail with Vista OS. Has been very well until we had an update last night and now not receive or send and the login box asking username and password keeps popping up. An error code is displayed that says cannot find server. Please advise?

  Hello

  Faced with this problem only with Windows Mail?

  I suggest to go through the following points and check the settings in Windows mail.

  Troubleshoot problems with Windows Mail.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  Working with Windows Mail in Windows Vista.

  http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-Windows-Mail

• Firefox for android 20.0 after update cannot locate the exit button. Help, please.

  No tab out to Firefox android 20.0 after update previous version it will output tab. Help, please.

  Is the solution in this thread help: where's the Quit button?

• Since the Thunderbird 38.0 update my computer crashes whenever I start Thunderbird. CAUSE: the sounds associated with a new message notification?

  I am able to use it in Windows safe mode but that is awkward. My computer works fine in normal mode as long as I do not open Thunderbird. Is it possible to go back to the old configuration of Thunderbird. I love the program but it is not very good like that. I tried running Thunderbird in its safe mode by pressing the SHIFT key, when I started to Thunderbird, but it came not in safe mode and the computer froze.

  Wayne Mery said

  rcharlie said

  I had this problem too. He has not happened since I disabled the new message alerts (not only sounds, but the popup and tray icon). It was freezing at startup only when there are new messages so he could get when I started upward. At least one of the freezes have shown the popup in part drawn on the screen, until all of the computer does not meet all, but hold the power button.

  rcharlie, I think your problem is different. I helped someone a few hours ago with similar symptoms where helped to disable alerts. And then, we determined that alerts could be activated IF we have disabled hardware acceleration to tools | options | Advanced | in general.

  rcharlie, what it do work for you?

  Yes. Or rather, the test message, I sent with hardware accel disabled and alert activated has not crashed the computer. Will update if it crashes again.

• Classic No. Lockscreen after update 10.3.2 blackBerry messages

  Hello

  Since the last update 10.3.2 I can´t see all of the locksreen messages. I´v already tried all stteings available on:

  http://helpblog.BlackBerry.com/2015/07/how-to-set-a-lock-screen-message-using-BlackBerry-10-OS-10-3-...

  and also any suggestions on this Web page:

  http://helpblog.BlackBerry.com/2013/12/stay-updated-using-BlackBerry-10-lock-screen-notifications/

  But I still can´t to see all messages on my lockscreen. The only thing I can see is the clock, and the taskbar from top.

  If there is no solution, is it possible to downgrade your software easily?

  Would be great if anyone of you has a tip for me

  This will show you only new messages and notifications, not those that you've already read.

  Also, if you are connected via your company, and they have disabled the lock screen notifications, you will not see them.

  And finally, if you have not set a password on the device, you might not see them either.

• "the paint cannot read this file" message when you open the file from the internet

  painting windows xp

  I have problems with my painting. When I try to open or to save a file in the internet paintfrom it is said: Paint cannot read this file, this is not a valid bitmap file, or its format is not currently supported

  How do you try to do this?

  Try the click with the right button on the image and choose Save image as, and then save it to your desktop. Then go into file-> only open paint and select the image on your desktop.

• Windows Live Mail - Cannot open tabs "New Message" or "Reply" etc.

  When I try to reply or open a new message, the window does not open. The only way I can open it is to go on internet explore, and then open a page or refresh a page; That the answer or a new message appears.

  I don't know what to do, he started a few weeks ago.

  Thank you

  You have probably installed Bullguard security software. An update just before Christmas began to cause the symptoms you see. They should disappear if you disable the BG anti-spam filter; the official remedy is upgraded to Bullguard v.12:

  http://Forum.BullGuard.com/Forum/15/cannot-create-new-email-or-rep_93060.html

  Noel

• Cannot automatically download new messages and auto answer with out-of-Office message must manually check for new messages, so he can do

  I use Mozilla Thunderbird 31.3.0. I know how to create a message filter, to implement a response message automatic, but impossible to get Mozilla to automatically download new message and auto reply with the message in the filter, unless I have manually check for new messages, this is the only way to make it work. I looked online and can't seem to find an answer to that particular question. According to everything I found, I have the right boxes checked in the server settings: automatically check for new messages at startup, check new messages, check for new messages every x amount of minutes. It's one thing to have leave my computer and open Thunderbird for this works, but having to manually check for new messages get the AutoReply to work defeats the whole purpose of having an automatic response, because I use them for vacations, holidays, etc. I wondered if there are security settings that cause this problem, but if so, I don't know what changes to do to them. Thanks in advance for any help. It drives me crazy.

  I find it a little odd that Thunderbird does not mail on the calendar, you may have an add-on or antivirus program that prevents this.

  Now shift while you start Thunderbird will begin with disabled modules to check if the messages are automatically.

  By air is to the right, use the autoresponder Verizons. This link might help with this http://www.verizon.com/support/residential/internet/highspeed/account+tools/email+tools/questionsone/85621.htm#
  You say that not having is not such a context in Thunderbird is something that needs fixing. This idea comes across because Outlook has such an option. what most people don't know of it only works with Exchange server. There is no "vacation response" in the specifications of the mail server so every server implements differently.

  As all cars have a radiator, you can't take any radiator, and simply put, they are subtly different even if they perform the same purpose. Goes same for stakeholders of vacation, they perform the same function, but they differ between brands of e-mail server software.

  Thunderbird leaves the server end to expose the feature, because they are really the only ones who understand what they were doing. Outlook exposes the option and especially greys out.

• Thunderbird starts slowly after update

  I've recently updated Thunderbird version 31.4 and since then TB starts very slowly. What happens is that when I click on TB icon in the Quick Launch bar, the borders of tuberculosis appear but nothing else. After about 20 seconds the rest of tuberculosis appears, but until that what is happening I just the four borders around an empty space. Is there something I can do for TB take less than 30 seconds to be in place and working properly?
  Out of curiosity why just the borders appear and put the empty space for 20 seconds?

  When your problem has been resolved, can mark this thread as "solved" Please?
  Thank you.

• No alerts on the iphone when it is locked after updated 9.2.1 to level

  Hello world. Since I upgraded my iPhone iOS 9.2.1 I don't get more iMessage or SMS notifications when my phone is locked. My iPad is becoming like my Apple Watch notifications, but the phone does not vibrate or play the sound signal. The screen also doesn't appear when the message arrives.

  Oddly enough when my phone is unlocked the notifications occur, which means that I hear the sound of incoming text.

  I checked all the basics like providing notifications for messages is configured, do not disturb is turned off and the phone is not cut. I tried to disable the notifications and restart the phone and then the reactivation. I also tried a hard reset of the phone as well.

  I know that this right broken after the put 9.2.1 update so TI changed tweaks, I'm not aware of the or there is a problem with the output. Everyone knows about this problem? Anyone know what is the most important a fix?

  Thank you!

  pdxor_jeff wrote:

  Hello world. Since I upgraded my iPhone iOS 9.2.1 I don't get more iMessage or SMS notifications when my phone is locked. My iPad is becoming like my Apple Watch notifications, but the phone does not vibrate or play the sound signal. The screen also doesn't appear when the message arrives.

  If your phone is locked and you have a Apple Watch and you have a wrist detection enabled, you will get sound/vibration on your phone. You'll get on the watch. This has actually been the case since the watch was released. If you want to get the acoustics/vibration on both devices, you should disable the detection of wrist in the Apple Watch app on your phone. This causes several other disadvantages, including not being able to use Apple pay of your watch and enter a password each time you want to access the watch (another by looking at the main screen).

• C:\ drive locked after update of Windows 8

  Earlier this morning I went to turn on my computer (Custom built Asus with Windows 8. Pro 64 - bit), I was greeted with the BSOD saying "a problem occurred" without any technical information. After a while he started finally to the "Boot Menu" he wouldn't let me refresh or reset the PC saying that the 'hard drive has been locked', most of the other startup options will not work. So I took out the hard drive and attached to my laptop (I have a SATA USB cable). He said I need to format the hard drive before accessing the drive, also "disk management", says the Partition type was 'RAW '. I didn't lose my data, so after a little more research, I put in a disc of Windows 7 and selected "Repair PC" and let it solve the problem. He said something like "repair hard disk. I let it run for a few hours, when it was done I took the drive and restarted my computer. It started normally with the windows logo 8 but when that ends, he goes to a black screen. I went to the "Boot Menu" but now he allowed me to update my computer. So, I updated my computer. This is where my current problem started. Once the update the computer restarted, he gave me a choice of two operating systems to open two of them saying "disk 1 of Windows 8. I chose the other and he went to the login to my profile screen. I logged in and it started the first time boot screen. After he 'Got things ready' it opens the start menu, that had "Desktop" "Windows Store" "Internet Explorer" and "Skype" (Skype was no logo just the name and a small cross in the corner). I went to the office (where I got what looked like safe mode), which has a black background with the model number of widows 8 in the corner and the only shortcuts to my steam game that were on my other hard drive (which was already disconnected) and a shortcut called 'Deleted Applications' Internet from there , I went to my computer and tried to access the C:\ drive when I try to open it says something like "can't access C:\. "I took the car back out and plugged into my laptop where I get the same message. That's where my expertise ends. A great help.

  Thanks for the help-

  Sky Hawk Bressette

  Hello

  Try these methods and check if that helps:

  Method 1:

  Try to enable the built-in Administrator account and check if it helps.

  Enable and disable the built-in Administrator account

  http://TechNet.Microsoft.com/en-us/library/hh825104.aspx

  Method 2: Check if you can take possession of the drive in safe mode. Try the following steps:

  1) start from the Windows 8 DVD
  2) click Next
  (3) select repair your computer

  (4) select troubleshooting
  (5) select Advanced Options
  (6) select command prompt

  (7) type - Bcdedit/set {bootmgr} displaybootmenu Yes (note the spaces)
  (8) type - out

  (9) restart

  (10) to the start screen, select F8
  (11) to select Safe mode with networking

  This can then be turned off when you are finished.

  (1) run by the lower left corner (Admin) command prompt right-click when Start appears.

  (2) type - Bcdedit/set {bootmgr} displaybootmenu not (note the spaces)
  (3) type - out

  Method 3: If the problem persists, follow these steps:

  1. start your drive of Windows 8

  2. do not click on 'Install now', click on repair your computer

  3. click on Advanced Options

  4. click on more Options

  5. click on diagnose my PC

  6 wait for the restart of your computer

  Check if your computer has now unlocked a HDD. I hope this helps.

• Pages M.I.A. problems: cannot read old docs Pages. Send heroes and advice.

  My beloved MacBook Pro (2011) crashed ugly, people from Apple (like you guys and girls) helped me to do a clean install, which cleaned up

  the seeds, but some important/sentimental data has been lost. Some of them can be recovered and some of them will be

  need to be rebuilt. I know that I will need to replace at a given time.

  My biggest concern is the inability for the news Pages to read the docs of Pages earlier. I need to keep my files available not only to the

  suggested ten years given by the IRS to think, but in perpetuity in the case where something goes south and a cluster-f arises. The last time this happened,

  I converted my docs for the software which not to be named because I had a shot at longevity with this software.

  If there is someone to AppleLand who can advise, please, please do. Maybe send a few recommendations for beer or wine.

  I might need them. Chocolate, too.

  metta940 wrote:

  My beloved MacBook Pro (2011) crashed ugly, people from Apple (like you guys and girls) helped me to do a clean install, which cleaned up

  the seeds, but some important/sentimental data has been lost. Some of them can be recovered and some of them will be

  need to be rebuilt. I know that I will need to replace at a given time.

  My biggest concern is the inability for the news Pages to read the docs of Pages earlier. I need to keep my files available not only to the

  suggested ten years given by the IRS to think, but in perpetuity in the case where something goes south and a cluster-f arises. The last time this happened,

  I converted my docs for the software which not to be named because I had a shot at longevity with this software.

  If there is someone to AppleLand who can advise, please, please do. Maybe send a few recommendations for beer or wine.

  I might need them. Chocolate, too.

  Well there is NOT an another SALES ARGUMENT for apple products.

  Go forward - possibly print to PDF and paper - all the documents you need.

  They installed at the same level you were on – or higher?

  On the only software that recognizes you may shoot in old documents/spreadsheets for IRS - or other social issues - LotusNotes now IBM.

• Netflix locked after update

  Since the update 1412 Netflix on my dashboard crashes after playing for a while. It happens immediately, more like 20 minutes in a film. Just completely, it freezes and must be turned off. Worked fine before the update. Does anyone else know this?

  
  

• After update, cannot access web sites

  We have Vista. After December 31, each time that windows is up-to-date, we lose internet access to almost all sites. With Firefox, we can get Yahoo and Yahoo mail. With explore, we get nothing. Always says "the connection has expired. Yet, we have a laptop with windows 8.1 seeping internet without problem on our home network. I did the system restore on the vista PC and that solved the problem of the internet. But the next day there was another update, and once again no internet access. Again, I must do the system restore to fix. Is there a way to fix this?

  Hello

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  'Remove an update - Windows 7'

  http://Windows.Microsoft.com/en-us/Windows/remove-update#1TC=Windows-7

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

  "How to hide or restore the updates of Windows hidden in Windows 7 and Windows 8"

  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

  _____________________________________________

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.