Thunderbird no longer works after installing security update
After installing 24.4.0 Thunderbird security update (20140316131045) cannot retrieve or send messages of any of my e-mail servers. There is no error message. I can see new messages through webmail.
Is it possible to uninstall this security update?
Make sure that your firewall is not blocking Thunderbird.
Tags: Thunderbird
Similar Questions
-
Hi, my CD/DVD drive has stopped working after I installed an update for Roxio Burn. I tried uninstalling and reinstalling, updating all windows and my device driver programs, but I just comes up with one, "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ', warning. The DVD/CD player that I use is called TSST corp DVD +-RW TS - H653G
Hello
Code 39 means that the driver is corrupted or missing.
Having too many CD/DVD programs can cause strange problems, especially if they're loading of parts of them.
Selves at the start because they will be competing for resources. This does not mean that this problem was caused by
These however is a possibility depending on which and how many you have installed.Definitel check with the help of Roxio and their forums - you may need to uninstall Roxio to see if this
allows the reader to work (not re - install until the issue is resolved).-------------------------------------------------------
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================================
After the foregoing:
References to Vista also apply to Windows 7.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The DVD player does not work after installing Windows 7
http://support.Microsoft.com/kb/975270/The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry settings for your
CD/DVD drive someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays
all devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Tap to click and three fingers slide no longer work after El Capitan update - MACBOOK AIR early 2014
Things no longer work after the update are:
1. TAP to click (I checked it on SYS PREF > TRACKPAD > tap-to-click)
2 finger three windows
3 Thre finger of several files and text selection.
I have selected three fingers slide accessibility and options of the trackpad iv done 4 fingers to mision statement and app expose, but the problem is that these feature mission statement and the rest three fingers still work. :@
It was just beautiful in yosemite please give a solution.
Please read this message before doing anything.
This procedure is a test, not a solution. Don't be disappointed when you find that nothing has changed after you complete it.
Step 1
The goal of this step is to determine if the problem is localized to your user account.
Select the feedback connections* and log in as a guest. Do not use the Safari connection only 'user comments' created by 'find my Mac '.
While signed in as a guest, you will have access to your documents or settings. Applications will behave as if you use them for the first time. Do not be alarmed by this behavior; It's normal. If you need any password or other personal information in order to complete the test, save, print, or write them before you start.
Test while signed in as a guest. You have to re-create your trackpad settings. Same problem?
After testing, log on to the guest account and in your own account, disable it if you wish. The files that you created in the guest account will be automatically deleted when you log out of it.
* Note: If you have enabled 'find my Mac' or FileVault, then you cannot activate the guest account. The login 'User comments' created by 'Find my Mac' is not the same. Create a new account to test and delete it, including his home folder, after testing.
Step 2
The goal of this step is to determine if the problem is caused by changes in the system of third party that load automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.
Please take this step regardless of the results of step 1.
Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.
Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.
Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.
The login screen is displayed even if you normally connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.
Test in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of steps 1 and 2.
-
Notifications no longer work after the latest updates.
As the title suggests, notifications for email, applications, pop etc. is no longer at the top right and no audio playback. He grew up in another forum, so I'm posting here too.
And before ask you, yes notifications are turned on and the audio clips are selected in the sound theme.
Hello
You are facing problems with notifications on Metro and audio applications after installing the updates.-Updates you installed recently?-You have all updates are installed on your computer?Method 1: I suggest you run the troubleshooter App from the link and if it helps.
http://go.Microsoft.com/fwlink/?LinkId=268423
Method 2: I also suggest you to follow the steps from the link and check if the problem persists.
What to do if you have problems with a soft
http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-appI hope this helps. -
The Styles of bindings are no longer works after the new update. (2015.1)
The Styles of bindings are no longer works after update of the MUSE 2015.1.
Hello, would you be able to send your Muse file so that we can investigate more? When I tried to reproduce the problem, I am not able to see it with a whole new file of Muse.
Please send your application to [email protected], with "attn:Jason" in the subject line and a link to this forum topic. If it is greater than about 20 MB, please use a sharing as Dropbox service.
-
I use Vista Business, I installed the update of important security for Vista (KB977165), after installing and restarting my computer, I received an error message that Windows has stopped working and then I get a black screen. I rebooted in safe mode and did a system restored. So currently I did not update.
This happened to someone else? Is it I can do it fix it?
Hello
Since you get such a serious mistake, I would use the free incident reports.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Windows Update or automatic updates no longer work after installing SP3?
Recently I photographed two XP machines. A a Latitude D600 and also an Optiplex 745 with Windows XP SP2. I can deploy SP3 in our process of the image. First run I did. Once installed SP3 updates no longer work. I found this article KB http://support.microsoft.com/kb/943144 and tried the suggestions here and FixIt MS, no luck. Then I thought why not try again maybe all the trial and error messed up something. I reimage but this time choose to do not to install SP3 immediately. Once done I run Windows Update and it works, until it installs SP3 then is no longer functions. I tried the above steps once again, no luck. I then leave the PC for 48 hours to see if the automatic updates the shot but they do not have. By other suggestions online I wrote a small batch file that updates several components of Windows Update (dll) which made no difference, and yes I'm in the last WindowsUpdateAgent. Please any help on this would be welcome. We move away XP but we have still a few dozen or more systems deployment running XP and this question slows down my work courses as I spend time troubleshooting instead of being able to finish and move along.
Hello
I suggest you to download and install Windows XP service pack 3 manually and check to see if the same problem happens:
http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3It will be useful.
-
Blue screen after installing security update KB2419640
After I installed Windows 7 security update KB2419640, I get a blue screen after reboot and finally do a system restore. Can someone explain how to get this update to work? I have tried several times now and it installs by is kind of lonely. Don't know what else to do.
TIA
See this post in the Windows Update forum: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/10eb9b57-aada-4c49-acf1-b81f016b1ed0
Never be afraid to ask. This forum has some of the best people in the world to help.
-
Pad at the top of the keyboard no longer works after installing Windows 7
I have a cl dv7-1273. Just changed from Vista Home Premium 64 for Windows 7 64. Win 7 installed OK. After you install the pad at the top of the keyboard no longer works in the dialogs like this. When I entered the numbers here I had to use the keypad. Keys still work in Word, Excel, Evernote, etc..
Someone on the forum had the same problem of pad during the upgrade to win 8. They solved the problem by uninstalling Comcast constant guard. I removed a constant guard and now my keypad work. Is there something in constant guard that is in conflict with the keys from HP laptop during upgrade to Win 7 or 8 Win.
-
TV - USB box does not work after installing windows update
The President complied,
I installed following updates on Apr. 18
Meadia Leadtek-Streaming and broadcast-ubs devices 2860 devices.after that my Rolf failed to initialize usb tv box, it worked normally. Please help me.
Now, I found the solution. If anybody face this problem, he could download this driver from following link
http://home.eeti.com.tw/web20/eg/download.html After you run this usb tv box utv3 driver will run smothly.
-
Wireless no longer works after installing OS
Due to a hardware problem, I had to reinstall the operating system. I'm running Windows 7 on an Inspiron 9300. Initially, the PC had XP on it but works Windows 7 for several years and when I tried to reload the drivers from the OEM disk provided with the purchase, I received error messages. The light Bluetooth enabled / disables the slot and off mode with the FN + F2 but the WIFI light, what has worked before you reinstall the operating system, is no longer lights up. I can't find that the WIFI in the list of my network. The driver for the Mobile Intel Chipset or drivers of wireless network will be set up. I get the message that the operating system is different and on one of the installation of the tent a message that says "OS not found article in the INI (iProInst.ini) file. Are there drivers available for the wireless network card that works on Windows 7? The original PC configuration shows that an Intel 2200 Wireless Mini PCI card has been installed. For any help or suggestion would be appreciated.
Thank you, Andrew. I downloaded the driver and it did not work at first. However, it is ultimately the one I needed. The I found on the networking forum and the first assignment was labeled 'Read Me First' from a K of Rick in it, he listed the measures to be taken if the BONE had to be fully installed from scratch. He entered different drivers and the order in which they should be installed. I found four points of recharge/reinstall in the list, he published and he did it in the suggested order. The quick set button would not move I received a message from the "is not a supported system. Setup cannot finish. The wireless still doesn't work after you install the network driver (R155386) so I scanned the files that have been loaded and are hitched to C:\Dell\Drivers\R155386\XP\Drivers and found the DPInst32 file (there is also a 64 bit one). It's the driver package installer and after execution of this fact, a series of drivers have been installed and the light launched WIFI. Once I went to my network implementation and setting up wireless setup, everything works now and I have access to the network. Thanks again for the answer so quickly and put me on the right track.
Roger
-
Programs do not work and then MSO1033 and Outlook.NK2Outlook appeared on my desk and I wonder if I should find a way to put them where they belong and everything will work well...
Hello Avalia,
Please provide us with some information about the programs that do not work.
With information available to us so far, you can run the restore to the date where the programs were working well.To restore the operating system to an earlier date, follow these steps:
1. click on the system restore starts, type in the Search box, and then click System Restore in the programs list.
2. If you are prompted for an administrator password or a confirmation, type your password or click on continue.
3. in the System Restore dialog box, click choose a different restore point , and then click on Next.
4. in the list of restore points, click a restore point created before you started having the problem, and then click on Next.
5. click on end.
The computer restarts and system files and settings are back to the State they were in when the restore point was created.
Here is a link to the system restore if you want more information
http://support.Microsoft.com/kb/936212/
Please let us know if it helps.Thank you and best regards,
Abdelouahab Microsoft responds to the technical support engineer -
Control of Toshiba Satellite A100: Buttons no longer work after the Xp update
Toshiba satellite A100 iOwn and use Windows XP Edition family.
After installation of windows update a few days ago from the functional buttons on the left side of the keyboard stop working - I can use the top running internet explorer or windows media player, but the other 3 buttons do not respond.I tried to run the system in the previous point, but it gives me error...
Utility Toshiba for the buttons has been downloaded and reinstalled but still not resultDownload and install CCleaner tool. This windows registry repair tool. It s for free. Repair you the OS.
Download the right modules common to you notebook series from Toshiba page, then reinstall it.After new control restart if the Toshiba control buttons functions!
-
DRAC5 remote console no longer work after 51 Java Update
Hello world!
After the usual Java (at 51 update of Java 7) update the remote console does not start no more. The java application launcher shows a "unable to launch the application" - error. Here are some details:
The DRAC firmware version: 1.65 (12.08.16)
java.lang.SecurityException: missing required permissions manifest attribute in the main container: https://drac.example.com:443/plugins/vkvm/avctDRAC5Viewer.jar
at com.sun.deploy.security.DeployManifestChecker.verifyMainJar (unknown Source)
at com.sun.deploy.security.DeployManifestChecker.verifyMainJar (unknown Source)
at com.sun.javaws.Launcher.doLaunchApp (unknown Source)
at com.sun.javaws.Launcher.run (unknown Source)
at java.lang.Thread.run(Thread.java:744)I hope that Dell will provide a fix as soon as POSSIBLE.
OK - there is a work around:
The DRAC5 systems add to the 'Site Exception list' (this can be done in the Java Control Panel in the "Security" section).
However, it would be nice if Dell would fix this in any upcoming firmware version.
-
Thunderbird does not work after installing Win 10 and the mobile profile of Win 7
I've installed Tbird 38.3.0 on a new Dell computer with Windows 10 on this (8 GB of RAM, 1 TB harddrive). I then followed these steps to put my old profile from the old computer to Windows 7:
1. copied my profile on the Windows 7 computer on an external drive.
2 installed Tbird on the new computer Windows 10 38.3.0, but has nothing to do with it.
3. following the instructions on the site of Thunderbird on the displacement of a profile:a) Use the Profile Manager to create a new profile on the Win 10 computer. b) Copy the profile from the external drive to the new profile folder c) Use Profile Manger to tell Tbird to open the new profile
4. start Tbird.
I see my files with email in them, but there are problems:
1. None of the Tbird dialog boxes open when I choose a command in the menu bar (including the new Message).
2. I can't get Tbird to display the contents of a folder in the Home tab. There is only the accounts and the advanced features of the Inbox, display in the right pane, next to the folder tree. The only way to see the contents of a folder is right-click and choose open in a new tab.
3. when I click or double-click on a folder, the contents of the file does not replace the previous folder. TBird on the Windows 7 computer, clicking a folder displays the contents of the new folder.
4. sometimes when I Alt + Tab of Tbird, then Alt + Tab, moving the cursor of the mouse on the messages in the Inbox tab causes the message object, Date,... to disappear, leaving blank lines.I tried to uninstall Tbird and reinstall it, but this does not solve the problem.
I tried to reboot Windows 10 but that does not solve the problem.
I don't seem to be able to download email and preview in the messages pane, but I can't open it in a separate window.A lot of people seems to be able to run Tbird on Win10, so it should work. Any ideas on why it does not work and what I can do about it?
Thank you very much in advance!
go to add-ons.
remove the addon of lightning.
restart - everything should be good.
If you still need the addon of lightning, install it again - it should give you a new version.Please tell us that all is well
Maybe you are looking for
-
Satellite A300 - my stucks laptop on BIOS when USB is inserted
Hello! I have a problem with my Toshiba Satellite A300. I had burned linux on a USB and tried to boot from usb. So when the laptop open, I inserted the USB and you press F12. The pc just stuck on Toshiba - Leading Innovation Screen.In the past, that
-
Difficulty to write emails, when I add text, the new text deletes the following.
When I wrote an email and I want to add text to change a previous entry, the new text deletes the following. For example: New buildings replacing old buildings in the neighborhood that was built in 1935. Water's edge If I want to add the word, say, ,
-
This download is there yet. It seems to be the same, this is the first time that I wrote the code at the end. I still download, allowing to update at the stop. It is not usually this many Microsoft Downloads. Full text of update: a security update
-
After a Windows XP update, I now get a blue screen saying windows has been shut down
He advocates disablinng options memory BIOS (which I don't know how to do), and I can't go in safe mode to learn how. The technical information States: STOP: 0X0000007E (0X805C49B8, 0XF7A202B4, 0 X 80000003, 0XF7A1FFB0) The computer is a Dell Inspir
-
Hello guysI have two methods in AppModuleImpl.1. to apply ViewCriteria2. to set WhereClauseOn my JSF page, I have two links,1. research - that calls SetViewCriteria and refreshes the viewObject2 link to define where clause based on the text of the li