Some of my programs no longer work after installing the new update from microsoft... can't locate the files server etc..

Similar Questions

• My CD/DVD drive no longer works after installing an update for Roxio Burn, (it was working perfectly until after the update).

  Hi, my CD/DVD drive has stopped working after I installed an update for Roxio Burn. I tried uninstalling and reinstalling, updating all windows and my device driver programs, but I just comes up with one, "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ', warning. The DVD/CD player that I use is called TSST corp DVD +-RW TS - H653G

  Hello

  Code 39 means that the driver is corrupted or missing.

  Having too many CD/DVD programs can cause strange problems, especially if they're loading of parts of them.
  Selves at the start because they will be competing for resources. This does not mean that this problem was caused by
  These however is a possibility depending on which and how many you have installed.

  Definitel check with the help of Roxio and their forums - you may need to uninstall Roxio to see if this
  allows the reader to work (not re - install until the issue is resolved).

  -------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Disable new found material pop up - appears after installing a new modem from Verizon

  AFTER YOU HAVE INSTALLED A NEW MODEM FROM VERIZON WITH THEIR HELP, I HAVE NOW FOUND NEW HARDWARE POP UP WHENEVER I START MY COMPUTER.  I WENT INTO MY CONTROL PANEL AND UNDER DEVICE MANAGE DISABLED IT, BUT GO BACK TO A DEFAULT VALUE BECAUSE IT IS ONLY A TEMPORARY DIFFICULTY.  HOW CAN I GET RID OF THIS POP UP?

  I HAVE NOW THE NEW HARDWARE FOUND POP UP WHENEVER I START MY COMPUTER.

  Looks like his driver has been installed by the user instead of for all users, for example by an administrator?   (I don't remember if it is still a feature of the XP.)

  BTW, this is not the best forum to ask for help with hardware and boot, especially for an old OS problems.

  HTH

  Robert Aldwinckle
  ---

• Program does not work after downloading the sp2 and sp3

  After spending hours and hours trying to download sp2 and sp3, I finally got to download completely successfully. for some strange reason when I try to open programs like weather bug and msn messenger they open but close immediately. How can I fix it?

  See...

  Help: I got hacked. Now what should I do?
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Pad at the top of the keyboard no longer works after installing Windows 7

  I have a cl dv7-1273.  Just changed from Vista Home Premium 64 for Windows 7 64.   Win 7 installed OK.  After you install the pad at the top of the keyboard no longer works in the dialogs like this.  When I entered the numbers here I had to use the keypad.  Keys still work in Word, Excel, Evernote, etc..

  Someone on the forum had the same problem of pad during the upgrade to win 8.  They solved the problem by uninstalling Comcast constant guard.   I removed a constant guard and now my keypad work.  Is there something in constant guard that is in conflict with the keys from HP laptop during upgrade to Win 7 or 8 Win.

• Gmail no longer works after reinstalling the operating system

  I posted on a forum for Gmail and no one answered. But on the fact that I can access these gmail accounts via web browser and Microsoft Office, I think there must be a problem with the configuration of Mac. I'd like some suggestions to solve my problem!

  Recently, I have reinstalled the OS El Capitan on my MacBook Pro 2013 retina. Before the reinstall, I could access all my Gmail accounts through the native application of Apple Mail. Since then, I couldn't access any of my Gmail accounts via Apple Mail.

  I tried to disable the two-step verification, but which is not resolve it.

  I deleted all count them several times and follow the steps below, but still can not get added (don't say one of the definitions to be insane is doing the same thing twice and expects a different result?

  Here are my steps that I take every time:

  When I connect, I use my Gmail password.

  Accounts/new Internet account

  Select Google

  Enter my user name and click Next

  Enter my password (not the specific app password, but the password for Google. I tried both and he always tells me that I have to use the Google password.)

  Click next

  The dialog box then says "select the applications you want to use with this account (and the logos of Google lies at the top of this box.).

  My options are:

  Mail

  Contacts

  Calendars

  Messages

  Notes (all logos Mac for those apps)

  All are checked, but I uncheck everything except Mail

  Click done.

  The gray button 'Complete' on

  Finally after that probably 60 to 90 seconds, I get a message through Mac OS that says 'Google account you added'"[email protected] has been added.

  In this box, I gives me the options of 'Not now' or 'enable '.

  If I select 'Enable', then I get the message through Mac OS that says 'Google password required'. I get my password, and the cycle repeats again and again.

  If I select "Not now" then the account appears as 'Inactive' in my list of accounts on the internet. Once I selected, I am immediately invited for the password... and the whole process starts again.

  Facts:

  Accounts are active IMAP.

  Accounts have two factors of authentication disabled. If I turned it on, the same things happen, with the only exception to receive messages and receive through my method to deliver, security code, but once I entered it, it can still access my mail.

  I have four other Gmail account, and what is happening in the same way with them all.

  They are all very well via a browser-based email

  They are all accessible through my iPhone and iPad.

  I can't access any of them through the native mail app Apple.

  They are all accessible through Microsoft Outlook e-mail client (2016)

  I even tried to disable the option to allow 'less secure apps.  I tried it on and outside, and nothing works.

  I'm ready to give up all my Gmail accounts at this point.

  Any ideas (other than to get rid of Gmail!)

  If you have not tried this, after completing the settings, try to delete Internet accounts. Go to Mail/preferences/accounts, and then add the accounts there.

• Wireless connection no longer works after that the virus

  First a browser both stopped working for a month or two, and finally Internet worked from my laptop (although it worked all my other devices). Now after trying to fix my internet system works when it is plugged directly, but is no longer detects wireless connections, and the light doesn't light even when I switch 'on' the wireless switch. Help, please! Thank you!
  Mike

  It's a laptop?  With built in the wireless?   Assuming that so-

  Usually the unit must be included in the same device manager if there is a driver problem.   I suggest you check the BIOS.  The wireless is displayed there?  Turned on?
  I suggest that you update the chip set driver and also try to download and install the driver wireless from your computer manufacturer.   We'll see from there.

• Wireless no longer works after installing OS

  Due to a hardware problem, I had to reinstall the operating system.  I'm running Windows 7 on an Inspiron 9300.  Initially, the PC had XP on it but works Windows 7 for several years and when I tried to reload the drivers from the OEM disk provided with the purchase, I received error messages.  The light Bluetooth enabled / disables the slot and off mode with the FN + F2 but the WIFI light, what has worked before you reinstall the operating system, is no longer lights up.  I can't find that the WIFI in the list of my network.  The driver for the Mobile Intel Chipset or drivers of wireless network will be set up.  I get the message that the operating system is different and on one of the installation of the tent a message that says "OS not found article in the INI (iProInst.ini) file.  Are there drivers available for the wireless network card that works on Windows 7?  The original PC configuration shows that an Intel 2200 Wireless Mini PCI card has been installed.  For any help or suggestion would be appreciated.

  Thank you, Andrew.  I downloaded the driver and it did not work at first.  However, it is ultimately the one I needed.  The I found on the networking forum and the first assignment was labeled 'Read Me First' from a K of Rick in it, he listed the measures to be taken if the BONE had to be fully installed from scratch.  He entered different drivers and the order in which they should be installed.  I found four points of recharge/reinstall in the list, he published and he did it in the suggested order.  The quick set button would not move I received a message from the "is not a supported system.  Setup cannot finish.   The wireless still doesn't work after you install the network driver (R155386) so I scanned the files that have been loaded and are hitched to C:\Dell\Drivers\R155386\XP\Drivers and found the DPInst32 file (there is also a 64 bit one).  It's the driver package installer and after execution of this fact, a series of drivers have been installed and the light launched WIFI.  Once I went to my network implementation and setting up wireless setup, everything works now and I have access to the network.  Thanks again for the answer so quickly and put me on the right track.

  Roger

• Satellite A200 - Webcam no longer works after installing Win7 32 bit

  I have a Toshiba Satellite A200-237 and I formatted my hard drive and installed Windows 7 Ultimate 32 bit once.
  I also installed software Toshiba site (camsoft-20070810084209) of this 1.7 version camera assistant...
  I start the program, but when I want to start the cam I get an error with the message of start the cam. I don't really understand the problem and when I loop upward the CAM system is unknown?
  What can be the problem? I have different version of CASES if so where can finance this?

  On my Satellite A300 (supplied with Vista) I installed the latest version designed for Satellite A500 (Vista version) and it works perfectly.
  I don't know if you can use it on your Satellite A200 but you can try it.

  You can find HERE for your model of laptop Win7 CASE
  CASE I used you can find HERE

  Try it. If it does not let us know.

• Windows Update or automatic updates no longer work after installing SP3?

  Recently I photographed two XP machines. A a Latitude D600 and also an Optiplex 745 with Windows XP SP2. I can deploy SP3 in our process of the image. First run I did. Once installed SP3 updates no longer work. I found this article KB http://support.microsoft.com/kb/943144 and tried the suggestions here and FixIt MS, no luck. Then I thought why not try again maybe all the trial and error messed up something. I reimage but this time choose to do not to install SP3 immediately. Once done I run Windows Update and it works, until it installs SP3 then is no longer functions. I tried the above steps once again, no luck. I then leave the PC for 48 hours to see if the automatic updates the shot but they do not have. By other suggestions online I wrote a small batch file that updates several components of Windows Update (dll) which made no difference, and yes I'm in the last WindowsUpdateAgent. Please any help on this would be welcome. We move away XP but we have still a few dozen or more systems deployment running XP and this question slows down my work courses as I spend time troubleshooting instead of being able to finish and move along.

  Hello

  I suggest you to download and install Windows XP service pack 3 manually and check to see if the same problem happens:
  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  It will be useful.

• Windows Visa Home Premium functions no longer work after installing Norton System Works.

  • I installed Norton System Works. Almost immediately, I have encountered the following problems:
  • 1. it takes anywhere from 3 to 5 times to use the mouse to block a section for copy/cut.
  • 2 Microsoft Office Professional stops when I open a product and click on the Windows symbol in the upper left corner, rather than give me a drop-down list.
  • 3. when the angle by using Microsoft Outlook and open an email, if I click on the 'x' in the upper right, instead of close the e-mail, he leaves the program.
  • Reinstall Windows Visa Home Premium will solve these issues?
  "Bobby1728" wrote in message news: 7337c24e-0c 57-4919-88b 9 - 49dc21c72196...
  a. I installed Norton System Works. Almost immediately, I met the
  following issues:
  .....
  > g.. Reinstall Windows Visa Home Premium will solve these issues?
  >
   
  Unlikely - but removing Norton might! (followed by a restoration of the system back to)
  before you install)
  NSW is now the most overbloated, more... software again
  invented by Symantec.
   
  Before installing Norton - you made sure that your system is in a
  State to receive? -Uninstalled your old AV and run the removal
  program that is almost always necessary before installing a new AV?
   
  Have you had any problems before you install it? -have you had an asset
  infection before installing it?
   
  --
  Noel
   
   

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC

• All USB Ports no longer works after that Windows 7 update error Code 52 Dell Inspiron

  How repairing USB ports when they have all stopped working after updates. Error Code 52 Dell Inspiron 1720. Pilot not signing not recognized.

  You can check the following registry key? :

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ (36FC9E60-C465-11CF-8056-444553540000)

  Is there a 'name' UpperFilters and LowerFiltersin the registry for this key, in the right window?

  If so, what is 'Data' for these names?

• Thunderbird no longer works after installing security update

  After installing 24.4.0 Thunderbird security update (20140316131045) cannot retrieve or send messages of any of my e-mail servers. There is no error message. I can see new messages through webmail.
  Is it possible to uninstall this security update?

  Make sure that your firewall is not blocking Thunderbird.

• Microphone no longer works after installing Windows 7 Ultimate

  I recently installed Windows 7 Ultimate on my laptop Acer Aspire Timeline (exact model Acer Aspire Timeline AS4810T-8480 14 inch HD laptop screen). I noticed that once I installed it, my microphone/sound stopped working. I have no problem listening to the audio, but I think that the microphone was affected. When you use Skype, that is the message that appears: "micro problem: there is a problem with the microphone into your computer." Try plugging a USB headset for this call. I know he's had no problem with my microphone before I installed Windows 7 and had been using Skype without problem. Can someone help me solve this problem? Thank you.

  Hi Ana

  Yes, first you recommend to contact ACER to your hardware mic problem.
  try to update your sound driver from device (right-click on computer management<>
  or download the Audio driver from the ACER site
  If persists
  uninstall the Audio driver and install the driver updated again, reconfigure the Mic and test the question.
  I hope that the problem will be resolved quickly
  concerning
  Nikhil
    

• CD-ROM drive does not work after installing a new game

  Problem with CD-ROM!

  Hello, before a few months my cd-rom doesn't work properly, one of these days, I decided to install the new game, and it shows that my cd-rom will not read the disc!
  OK, I thought: Maby the cd is damaged in anyway so I'll put another cd to see if the problem persists, I had a new cd empty and rolled on the cd-rom and waited but nothing showed... I searched some tips on this problem and here's what I did:
  1. clean the pc with Malwarebytes Anti-Malware and Norton.
  2. re-installed CD-ROM drive (HL-DT-ST DVDRAM GT30N)
  3 downloaded Fixit and troubleshooted CD with it, it says that the disc was not readable, anyway I know it's readable!
  4. download CDCheck and checked the E: pilot, it is what comes out of http://img253.imageshack.us/img253/8175/48433351.jpg

  I don't know what to do next, but after trying it, I think it's a hardware problem.
  If this can help I am running Windows 7 Home premium x 64 on a laptop.
  What can I do to fix this?

  Hi Sergio,

  I suggest you try the steps in the Microsoft article and check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  Registry warning:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  Let us know the results.