Similar Questions

• Problems of conversion of PDF to MS Word document.  I managed to convert 4 files and now the subsequent files generate a "Conversion failed" error when you try to convert the file.  I have a big manuscript and I separated each chapter to assist with co

  Problems of conversion of PDF to MS Word document.  I managed to convert 4 files and now the subsequent files generate a "Conversion failed" error when you try to convert the file.  I have a big manuscript and I separated each chapter to help the conversion; as I said, the first 4 pieces without problem, then the conversion failure.  I tried to convert the document integer and same result.  Specifically, I bought the feature export to Word.  Please help.  I had initially export the Word Perfect PDF document and attempting to pass PDF to MS Word.

  Hi sdr2014,

  I'm sorry to hear that your conversion process is at a standstill. It seems that the problem is not specific to a single file, you have been unable to convert anything, since the first four chapters of a correct conversion.

  So, let's try this:

  If you want to convert via the ExportPDF site, please sign out, clear the browser cache, and then reconnect. If you use the drive, please choose Help > updates to ensure that you have installed the latest version.

  Please let us know how it goes.

  Best,

  Sara

• Problema al Extender en disco esxi 4.1

  A saludo a todos los compañeros of este foro.

  Paso a mi explain problema: Tengo virtualizado bajo Vmware Esxi 4.1, a Server 2008 64 bit R2, in el cual tengo back discos duros (office), 30 GB C: y 120 GB D:. Problema mi ha venido a raiz that el espacio in the unidad C: (disco del sistema), quedo muy pequeño. Entonces, procedi a MV e incrementar el tamano para a 80 GB, en the config of the MV. Al iniciarlo posteriormente, vi in the system, the administration of Equipos en, as el disco C: seguia a 30 GB pero that tapeworm 50 GB mas particionados, pero sin iniciar in el mismo disco.

  Reading en Internet, procedi a unite las back particiones, mediante misma tool del Windows 2008. Al reiniciar MV, in the administration of equipos, el disco duro C: is 80 GB, pero UN disco como muestra if lo veo por el explorador, el disco duro con sigue UN size of 30 GB y espacio 0Ko I have.

  Why el Explorador de Windows me sigue showing el tamano antiguo y tanto el administrator of discos, como el diskpart me than muestra el disco-tiene 80 GB?... What me falta hacer o what he done wrong?

  Of photos, the guia thank me orientar can a delivery este problema.

  Saludos,

  Daniel

  Hola

  The problem would be in Quebec no is extendio el volumen en windows, mira following link:

  The partition size is extended, but the file system remains the original size when you extend an NTFS volume

  http://support.Microsoft.com/kb/832316

  How to extend a data volume in Windows Server 2003, Windows XP, in Windows 2000 and in Windows Server 2008

  http://support.Microsoft.com/kb/325590

• Help please, conversion devices for ESXi .ovf hard

  We have just installed ESXi and it's my job to import all our VMServer devices to the ESXi.

  I have read several forums/blogs different on the conversion of the .vmx .ovf using ovf tool, as well as I have read about VMware Converter as well but haven't tried this as yet, everyone knows success with this.

  The ovf tool I can convert successfully to a .ovf file but when it came time to import on the ESXi Server I get the following error.

  "The OVF package cananot be imported on the selected host.

  The FVO contains an IDE hard drive, which is not supported: disk 1 "

  Anyone have any suggestions for a solution to this problem?

  Thank you in advance.

  Pauldg

  For the source to try it with the other and then access the VMX file and for the use of VMware Virtual Machine infrastructure destination and on the next screen, you will get the screen to connect to your ESXi host.

• Problems with conversion of number chain

  I try to display a receipt, after that some items have been added.

  The application works well for an article, but when I add more than one, it displays a different value of what should be.

  I also have problems in the display of the element of the second and third.

  Can someone help me solve this vi?

  Thanks in advance!

  I found the error. The mistake was made in the conversion of a string to a number. I just used Fract/Exp chain to the number, and it fixed the problem I had.

• Problem with conversion

  OK, I read like 20 posts that appear to be similar, and after following the instructions I'll always have the same problem.  I downloaded a .flv.  Converted to .wmv using separate software.  Now I plug my e280v2 and start SMC.  I import the file and click on convert.  The conversion bar reaches 100%, but the other bar stops at 49%.  It does seem to matter how long I leave it there, it will not be completed.  I am extremely frustrated at this point.  Any help will be most appreciated.

  Thank you

  Tim

  Try to convert it to .avi and .wmv not using your other software. As .avi v2, where v1 to prefer it .wmv.

• Terrible problems of conversion of the site to meet the new version of Muse (and other important observations)

  Dear all

  I was very pleased with the new version of sensitive Muse.

  I had downloaded the pre-release version and tested it and presented my comments as a good obedient of Muse Web site designer, after all, we must all contribute to get the best system that actually works.

  Is the day of release and I've updated Muse via my desktop CC application.

  I watched videos Adobe make reference to liberation, that everything online and even read through the excellent series of video training sensitive to themes of Muse.

  Only some of my clients gave me their business with the understanding that I would like to convert their sites Adaptive desktop, Tablet and phone versions to fully responsive as soon as the new version is out.

  A customer has a big launch very soon which also requires the contents of the site changes so I decided to tackle this site first.

  I made a copy of the site and opened it and it converted or whatever Muse only when you open an existing site in the new face.

  I changed all the settings, site, properties etc etc in the offline version of the page.

  Then, I have worked to make the Master suited page.

  It is then that my nightmare began.

  Nothing seemed to work as described and the biggest problem was the clamp that was so slow, late, dried, etc., it was almost unusable.

  In any case, after 18 hours, the page master has been made and when you preview in the development tools Google Chrome seemed reasonable enough.

  Why 18 hours you might ask, well partly because of the clamp problem mentioned previously, but the entire system is extremely inefficient in the way it works with so many questions to consider whether to apply or not apply to each object and a constant in Google Chrome preview as you could not trust what has been is displayed on the screen of Muse.

  Next challenge was to convert the content of the home page. It wasn't a page complex and only consists of 6 pieces - pictures, text and a button on the State.

  I have applied all the settings and slide the clamp to slightly reduce the width of the browser, that when I had to move showed major problems on the page immediately:

  • Huge empty spaces appeared
  • The objects did not adapted as it should and that I had seen in so many videos - so, for example, if a block of text was next to an image they immediately went massively out of alignment when you drag the clip
  • The finished status button on the margins of the page
  • Etc etc.

  In any case, after 6 hours of tearing my hair that I give up and contacted Adobe.

  They began a session remotely and said I had everything set correctly and that Muse wasn't as the developers had planned.

  Finally, they said by e-mail on the .muse file, which I did, and of course I'm sitting here with a looming deadline and still no answer on how to solve the problems, which no doubt all my other existing sites will not have when I come to convert.

  Other problems discovered during my tests to date are:

  • Right click for very slow service
  • Slow to open library (more despite being told you can download several items from the library when you try to load too, a lot (by Muse) everything freezes Muse and you force a fence via the Task Manager)
  • Adjusting the position of the breakpoint by right clicking on the breakpoint window very slow, late development and jerks (IE just like the clip)

  In addition, I was absolutely horrified to see that there were other issues, especially since many objects react at all:

  • Image do not respond in the envelope
  • Compositions of
  • Slideshows
  • Forms
  • Google maps has only reactive width no height as well
  • Google Map inserted via insert HTML while I updated sensitive width, there is not (I guess the code must be added to make all insert sensitive html and some guidance on what could be this code would be useful Adobe, including a video on the subject feature Muse is so limited you must add a large number of html).
  • YouTube has only reactive width no height so completely useless
  • No effect of scrolling on Muse reactive
  • In addition, virtually all 3rd party widgets Muse themes et al. do not work with response as they say they are waiting for Adobe to undertake the necessary work on base first. So any site that uses widgets cannot be converted (and almost all do so because of the lack of functionality of Muse)

  This Muse is not really sensitive and it is useless to creation or conversion of sites until it is.

  Also, I was extremely disappointed to see that despite me and a lot of other designers asking some features via the Forums Muse he had not been included. This includes, but is not limited to:

  • Draw ellipses (& circles) and polygons that you can in InDesign in forms or frames of image
  • Site search function
  • Images do not clearly appear in the Muse until preview
  • No password protection function
  • Form always using reCAPTCHA 1 not 2
  • No installation on the forms file upload
  • Slideshow of legends still not discoloration with images
  • No idea if all the SEO issues as I cannot finish a site and scan

  What a disappointment is complete.

  So, for me, sorry Adobe not usable as a form builder free site responsive until much more work has been done, hopefully very soon.

  Kind regards

  Mike

  I just spent two weeks, putting in place a sensitive muse site. I am gray, tired and frustrated. I was so excited to make this project work.

  I wish I had read these articles earlier.

• Problema conexao ao 5.1 ESXI host using IP address

  Good afternoon!

  Enfrentei ler um problema ao try connect ao console ESXI. Beauté na tela dinna host ESXI as o mesmo não distãncia IP.

  "Then fled ao"configuration management network " para configurar o IP, para a minha surpresa access estava indisponivel o para o meu usuario root, nao conseguia joints o IP.

  Then sobrou a configurar por linha comando option. After some tempo, um colega para resolver o problema precisou realocar o meu para VMKernel interface devida. Problema esta IA, fazer isso, houve o why?

  Then para voces entenderem better, o cenario e este aqui:

  1. Servidor com interface to enable gerencia IBM;
  2. A team of suporte e love por joints o IP without Configuration Management Network;
  3. Apparently a suporte o IP joints esqueceu team - but why nao era possible joints o IP da forma normal, pelo esxi host?
  4. A team of only, the faz joints nome o suporte e ip e demais configuracoes using o do ESXI console.
  5. List of Ao as interfaces, one ""Management Network; " " era presented, however, neste host ping ao address 127.0.0.1 localhost o mesmo não estava running.

  Then pessoal, estou Querenda hear what it happened neste don't host ESXI, afim sanar registaram problemas no futuro.

  Desde ja Agradea§o!

  Fabio,

  UM problema e possible a members interface (VMKernel port) ter sido removed do group members ports, through e of da comando voce poderia verificar linha an existencia da mesma utilizando o comando esxcli list of network ip interface.

  Uma vez não exista essa interface, possivelmente voce nao let configurar o IP do through configure networking, ja nao existía uma porta para ser configurada.

• Problem DELL MEM pack on ESXi 4.1 installation

  Hello

  I'm having a problem with one of the host ESXi 4.1 when I try and install the pack MEM DELL EqualLogic.

  Error:

  Installation of packages: cross_oe... # [100%]

  Encountered error VisorSetupError:

  The error data are:

  Message - could not clean up staging of dir/tmp/stage: [Errno 20] not a directory: "/ tmp/stage/oemstage/usr/lib/ext/dell/srvadmin/var/lib/openmanage/log".

  Errno - 17

  Description - there was one creating destination ESXi installation error

  The command, I am short of connection Putty is below:

  esxupdate - bundle == dell-eql-mem-esx4 update - 1.1.2.292203.zip

  It works fine on the other five guests.

  I checked free space on the disk, and there is plenty of space.

  / Suggests ideas please?

  Thanks for your help Julien but for lack of time, I just took a host profile and rebuilt the hosts.

  Kind regards

• Conversion to the ESXI - 23 error format failed

  Hi all

  I'm trying to convert a VMWare Server instance in an instance ESXI using vCenter Converter Standalone. The tool cannot obtain the hardware information for the selected system. I tried a lot of different things, including the opening of the virtual machine in VMWare Fusion and assignment of a different type of operating system, it reboot several times, creating a new snapshot, check the permissions and more.
  The most recent error message I get from the tool is:
  2013 02-27 T 04: 56:32.315 - 08:00 [02116 "Default" info] creating vmx file Analyzer

  2013 02-27 T 04: 56:32.315 - 08:00 [02116 info 'Default'] [BaseParserImpl::Parse] Config info is not cached

  2013 02-27 T 04: 56:32.317 - 08:00 [02116 info "Default"] \\vm-nas\USBDisk2\DLP 11.6 VMs\Enforcedemo_V11.1\Enforcedemo_V11.vmx analysis

  2013 02-27 T 04: 56:32.366 - 08:00 [warning 02116 "Default"] invalid serial port file type thinprint

  2013 02-27 T 04: 56:32.972 - 08:00 [02116 info 'Default'] [, 0] Sysimgbase_DiskLib_OpenWithPassPhrase failed with "the parent of this virtual disk could not be opened" (error code: 23)

  2013 02-27 T 04: 56:32.972 - 08:00 [02116 info 'Default'] [, 0] error 23 opening disk \\vm-nas\USBDisk2\DLP VMs\Enforcedemo_V11.1\Enforcedemo_V11-000002.vmdk 11.6.

  2013 02-27 T 04: 56:32.972 - 08:00 [02116 info 'Default'] [, 0] error 23 opening disk \\vm-nas\USBDisk2\DLP VMs\Enforcedemo_V11.1\Enforcedemo_V11-000002.vmdk 11.6.

  2013 02-27 T 04: 56:32.972 - 08:00 [error 02116 'Default'] [BaseDiskSetComputer::DoOpen] OpenDisks failed, error mntapi: 370

  2013 02-27 T 04: 56:32.972 - 08:00 [error 02116 'Default'] [BaseDiskSetComputer::AnalyzeErrorAndThrow] error occurred while opening game of diskettes, MNTAPI_ERROR = 370 MNTAPI errorType = 2 errorCode = 23

  2013 02-27 T 04: 56:32.972 - 08:00 [02116 info "Default"] scheduled timer cancelled, succeeds StopKeepAlive

  2013 02-27 T 04: 56:32.972 - 08:00 [error 02116 "Default"] unknown exception when calling VMOMI method queryComputerInfo

  2013 02-27 T 04: 56:41.137 - 08:00 [info 05048 'Default'] [Converter.Worker.DiagnosticManagerImpl] generate LogBundle.
  I think the problem here is error 23, "the parent of this virtual disk could not be opened." Does anyone have an idea on how can I fix?
  Any help would be greatly appreciated.

  Andreas.

  When you run the virtual machine no * full * disc is read (or written) but the readings of Converter * full * disc, that is why you can run the virtual machine without error or until you try to use the place broke. Make a copy of the virtual machine in the other place and try again. HTH

• NFS problem after upgrade to vSphere, ESXi 5.0 5.1

  Hello community,
  I installed / updated on a Dell r.620 Server ESXi 5.0 5.1 vSphere
  I also have an ESXi installed 5.0 an another r.620 Dell both connected to a Snyology Racksation via NFS. (at different volumes)
  Now, I have the problem that I can't install an OS (Windows XP, Windows 8, Windows 7) located on an NFS share in a new created virtual machine.
  I am not connected without vCenter, just with the vSphere Client direct connected.
  The system boots, but I can not choose to install the operating system on the new created VMDK but then nothing happens.
  I also tried to format the drive before installation, formatting breaks down after 15 minutes with the message: "unable to format the drive...". 0 x 80070057 ".
  When the virtual machine is on the local storage of the VM to the server, everything works fine.
  I can also install and start virtual machines on the same NFS with an ESXi 5.0 share.
  Formerly installed VMs can also start. All hung on the windows logo screen and the German Embassy "Comuptereinstellungen werden übernommen"... for over an hour...
  The same virtual machines work fine on the ESXi 5.0, located on the same NFS share.
  But on the NFS share, I can write and read the data with the Client vSphere (on configuration-> storage) with no problems, so I guess that there is a problem with the NFS, permissions etc volume.
  So I guess there must be a problem with the NFS share on vSphere Host 5.1.

  Does anyone have an idea what is the problem?

  Thank you very much!

  No worries

• Problem with sh scripts on ESXi 5

  I recently had to solve some problems with delays during renumerisations and restarts due to RDM which is attached to a host ESXi 5 discs. See this article for details http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1016106. Since I had a large number of RDM disks and needed to run the commands on each host I thought that I would write a script. I created the following scripts (just a subset here), but are there problems when it runs:

  Perennial.sh

  esxcli storage device base setconfig d naa.60000970000292600424533033434642 - perpetually reserved = true
  esxcli storage device base setconfig d naa.60000970000292600424533033434643 - perpetually reserved = true
  esxcli storage device base setconfig d naa.60000970000292600424533033443041 - perpetually reserved = true
  esxcli storage device base setconfig d naa.60000970000292600424533033443133 - perpetually reserved = true

  and

  perennial_verify.sh

  esxcli storage device base list d naa.60000970000292600424533033434642 > > storage_list.txt
  esxcli storage device base list d naa.60000970000292600424533033434643 > > storage_list.txt
  esxcli storage device base list d naa.60000970000292600424533033443041 > > storage_list.txt
  esxcli storage device base list d naa.60000970000292600424533033443133 > > storage_list.txt

  I put the files on a data store and gave them execute permissions and they seem to work, however when I run the scripts, they give an error at the end of running something on command not found or something. It does not run all the commands as well. Finally, when the perennial_verify.sh is run more than once something happens in the file storage_list.txt - he had me puzzed for awhile - he showed that the file was different from zero in size, but when I did a cat or less that he would say that the file is not found. Finally I tried to copy the file down in the browser of data store and found that there was a printable character appended to the end - possibly a return carraiage. Now I can not rename the file or delete it - it is impossible to remove. If anyone has any advice on running sh scripts and the correct way to pipe the output to a file I know you more.

  Thank you

  Ed

  What is the exact error do you receive when you try to delete?

  Rather than redirect the output for each order, simply redirect the script in the log file, which will capture the entire script.

  ./perennial_verify.sh > storage_list.txt

• Problema importazione macchina fisica in esxi 4.0

  ROM importare una macchina semplice winxp pro, not this particolari sono cose sopra, unico dettaglio, hdd 500 GB, suddiviso in 2 partizioni mentre 250 e di, of da he datastore Dove andra a finire macchina in versione virtualizzata, e di 160 GB.

  Premesso che mean dei dati e di solo 10 GB, ho used "a caldo" con utility 4.1, Jessica doing prove di ridimensionamento della partition (100 GB, 50 GB, it minimo che viene here), importazione con takes success, my quando vado ad avviare macchina virtuale posso vedere nella console solo una schermata nera con a cursore in alto a sinistra e di fatto if no starts.

  Wrong qualcosa? ForSE it problema e nel resize del disco?

  Grazie by any help...

  Usually not e it resize it problema, sicuro che hai no impostato magari a cambio di controller disco? Con versioni ESXi 4.x you can e successive utilizzare an IDE controller, in modo che sia Republic nativamente da Windows XP.

  Inoltre, installi I have vmware tools alla fine della di server procedure?

  Prova a usare he converter 5.0 standalone.

  Ciao,.

  Luca.

• VIB problem custom in 4.1u1 ESXi 5 upgrade

  Hello

  In a HP ML350 G6, I started the upgrade and was confronted with an error message regarding the 3rd third-party drivers that will be removed and could adversely affect system

  stability if deleted wrongly.

  The drivers are:

  OEM-VMware-ESX-Drives-net-vxge

  OEM-VMware-ESX-Drives-SCSI-3W-9xxx

  I used iso that I download from HP.

  How can I solve this problem and update without problems?

  Thanks in advance

  These two drivers have been installed with ESXi 4.1 Update 1. Unless you have a special Setup to your guests and you use these drivers, must register to continue installation by forcing the upgrade.

  André

• Problem adding a data store ESXi 4.1

  Here is my configuration:

  Two hard drives in RAID 1 for ESXi (250GB)

  Four hard drives in RAID 5 for VMS (2.73 TB)

  I read that you can have a store more than 2 TB of data. What I want to do is keep the existing 5 RAID, create two LUNS and add them as two warehouses of data separate (I guess that's the best way to work around the limitation of size). It does not really matter to me whether two LUNS of equal size or if one 2 TB and the other is 730 GB, just what is easier, I guess. My problem is that I don't know how to create LUNS. I looked into the utility Configuration RAID Adaptec BIOS, but I can't do anything other than the basis of creation and deletion of tables. Can anyone lead me in the right direction? Thank you.

  You will need to go through the documentation for the RAID controller. Many but not all will allow you to enter a virtual LUN table or terminology of the disks vary according to the manufacturer. If you do not have this option, you must create two RAID 1 volumes.