Satellite M30-S309 - certain proportions on external monitor not right

Similar Questions

• Satellite M30-S309 - where can I get the drivers?

  someone please help me?

  I need the driver for Toshiba Satellite M30-S309 (PSM30U-0QKJ18) and Windows XP. I had been searche since last week, but I can't find it.

  Please something dp

  Hello!

  I m wondering you didn t find the drivers because you can get it on the Toshiba site:
  http://www.CSD.Toshiba.com > download

  Don forged t, click on view all designs, where you choose the category.

  Good bye

• Satellite P100: Can I connect two external monitor to the VGA & DVI port at the same time?

  Satellite P100 comes with two port external monitor. One VGA and one DVI. Can you have two external monitor works at the same time? Can you have two external monitor as well as your internal screen working at the same time (for a total of 3 screen at the same time?

  Here's what I confirm:

  Internal display + display DVI connector
  OR
  Internal display + screen VGA connector

  Is it possible to have:

  Display connector DVI + VGA connector display?

  OR

  Display connector DVI + VGA connector screen + internal display?

  As far as I know, this is not possible and you can use a DVI or VGA port.
  Output signal can be used only a single port for external monitor.

• Satellite M30-S309: cannot change on the local network adapter device

  Hello

  My name is Sebastian and I have a Satellite M30-S309 I can't configure IT the Connection WiFi.
  The drivers its OK (and reinstall) the LAN, but the WiFi RADIO network ok is OFF, have any opportunity to step ON this Board?

  I reinstall the KEYBOARD shortcut, but I think that the app or utility for the Fn + F8 key and the LED does not.

  Any can help me?
  Thanks in advance,

  S.

  You said the LAN is ok, but are you sure that the wireless network adapter has been installed on this laptop. Please check in the area to network adapters Device Manager.
  If the wireless network adapter has been installed, you should see the wireless network card in this area. As much as I k now the Wlan switch on the front of the laptop works only if the wireless network adapter has been placed.

• Satellite L30-149, only works with external monitor and VGA mode

  Satellite L30-149, Windows XP Home Edition

  Yesterday I did face the following problem:

  I swithched on my laptop but I have nothing on the screen. I tried to reboot several times, but it did not help. If I look very carefully, I see the logo of Intel (black text on white on the screen) but nothing else. The logo shows very low.

  I plugged on the external monitor. With that he gives a little more. The Intel logo with the instruction how to reach configuration etc. Then Windows logo but when it should ask the user, the external monitor going to sleep mode and nothing happens after that.

  And an external monitor, I managed to connect to Windows in safe mode and also in VGA mode. In VGA mode, I tried to change the resolution, after that I got black screen again and I had to start.

  Now I wonder if I could do something (update of drivers, etc.) or should I go to the store where I bought the laptop and ask them to fix it. This look like a problem covered by the warranty?

  --
  Upgrade to this message (what happened after that I wrote the above text).

  I turned on the laptop again. I thing the lightning from the room is now better because I noticed that the laptop seems to work (almost) correctly. Windows starts normally, I can faintly see the desktop. This seems to be a problem in the background ligthning. FnF7 does not change the situation.

  Post edited by: mpetas

  > If I look very carefully, I see the logo of Intel (black text on white on the screen) but nothing else. The logo shows very low.

  This sentence is very interesting.
  Sounds like a question of FL-ups!

  It is a small part behind the screen and control the backlight of the screens.
  Usually, this part is not very expensive and the replacement is not complicated to a technician for laptop.

  If your warranty is valid, then everything should be done for free.
  Try to contact the ASP in your country and ask for later handling.

  Greetings and good luck

• Satellite Pro A200-CH7 - flickering on external monitor

  I have a Satellite Pro A200-CH7 and have the same problem with my external monitor.

  It's a Viewsonic VX2262WM of 22 "and I see flashing on the screen. I tried the monitor on another laptop and it worked fine.
  The question is the graphics of cards my Toshiba laptop.

  Hello

  Perhaps twinkle could be linked to bad land?
  Sometimes, this could affect the external display.

  Please check if the problem goes away if you unplug the adapter from the laptop

  Welcome them

• What is it's ok to keep Satellite U500 closed while using the external monitor?

  Hello

  I have a Satellite U500.
  At home, I use a monitor and a keyboard. So I closed the laptop while working at home.

  I can do this, or would it damage the display or otherwise hinder ventilation properly somehow laptop?

  Thank you very much for your answers.
  Thierry

  Hi mate

  Of course, you can close the lid when the laptop is connected to the external display.
  I have a Satellite phone as well and it s connected to the external monitor.
  I also have a USB keyboard.

  I use the external keyboard instead of the internal keyboard for laptop and the cover is too firm

  Don t worried if he of ok!

• Satellite A200-1BJ - no display on external monitor

  Hello

  I have a display problem with my laptop, which is:

  When I connect my computer to an external display (projector - data show - using the rgb or s-video cable), the contents of my computer are not displayed.
  I used F5, Catalyst Control Center, but without success.
  When I connect it with a TV using s-video, I get the message "no signal".
  I think of the existence of the other devices, but the content is not sent to the external display.

  I don't know what the problem is. I need to use my computer and the screen using a projector for my presentations, which is very common.
  The problem is that he used to work, then suddenly it stopped display on external displays.
  I could not understand the problem, then I thought that the settings have been changed accidentally.
  So I formatted my computer back to the factory setting, but my attempt failed and it still does not display on the external monitor.

  My computer specs:
  -Toshiba Satellite A200-1BJ
  -Processor: Intel Core2 Duo
  -OS: Windows Vista editions Home Premium
  -Graphics card: ATI Mobility Radeon HD 2600

  Does anyone know the solution?

  Thanks in advance.

  In your case I would update the BIOS and the display driver. The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Have you tried different cables? Maybe it s faulty or too long.

  Also, be sure to use a rate of resolution and refresh supported for the external monitor display. You can change that in Catalyst Control Center.

• Satellite Pro6100 - external monitor not showing movies

  I searched but couldn't find anything related. I wanted to watch a movie through the external monitor port connected to a projector. I could see all the big screen except the movie itself.
  I checked the laptop screen and the film on this subject but it is not cloned - I just get the border of media player and the buttons but it shows only a black screen, not the film.

  I tried a friend's Tecra 9000 and it shows the film perfectly. What gives?
  Updated the BIOS and I have the latest drivers Toshiba provided and followed all the guides for TV out, monitor, cloning, setting resolution etc, just have not found the magic combination.

  > I checked the laptop screen and the film on this subject but it is not cloned - I just get the border of media player and the buttons but it shows only a black screen, not the film.
  The settings collection can be all problems as suggested by Akuma.
  In addition it is very important that you switch the display on external monitor first before you start the movie!

• Satellite M30-S309 - what is the fastest processor for upgrade?

  I'm looking to upgrade the CPU in my M30 and wonder, what is the processor the faster, in that I can put? I am very familiar with the guts of the PC and I'm comfortable replace myself, I just need to know what the fastest I can get is.

  Any help is greatly appreciated!

  Tom

  Hello

  Until you have created this topic, did you find it?
  [Is it possible to upgrade the CPU or GPU of a Toshiba laptop computer? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=13]

  If you want to risk this update check the specifications of the other portable Satellite M30. If you can find one with faster CPU, maybe it will work also on your laptop.

  But don not forget that the current CPU is tested in your laptop!

  Welcome them

• Satellite A215-S7414 - no signal on external monitor

  I have the model A215-S7414 and the LCD screen is broken,
  So now I have a 2nd moniter "run the image" for my laptop

  The image is available by loading microsoft and F2, F8, F12 logos
  However, to start the laptop I always had disable driver signature enforcement to get to the point where I can access Windows

  I hear the laptop that windows has loaded, but the moniter automatically stops and says 'no signal '.
  the monitor is an Emachine E19T6W

  I ran a start-up repair, don't know if it's relevant, but he says
  "unspecified system configuration changes may have caused the problem.

  so, if you please help me.
  I would gladly appreciate it willingly

  Hi mate

  The only option that could be useful in your case is the use of the FN + F5 key combination.
  If this key combination function, you should be able to switch the video output to an external monitor.

  But if the FN + F5 combination doesn't function then I put t see no other workaround to the release of the video on the external monitor, how do you want to change something if you n t see anything on the screen?

• Satellite A135-S4467 - LCD is dim - external monitor is fine

  I can see my desktop if I shine a screen have screen LCD flashlight and if I plug an external monitor everything works fine.
  Programs and everything works I just can not see the screen on the LCD screen.

  I am new to this so if someone can tell me what to check and how to check and fix if possible he greatly appreciated wioyuld.

  If anyone has had the probklem and what have you to do? Where can I find a repair manual or tips and tricks online.
  My warrentry is 2 weeks out of date.

  Thank you in advance.

  > I can see my desktop if I shine a flashlight on the screen LCD and if I plug an external monitor everything works fine.

  This problem resembles a failure of inverter FL.
  The FL inverter is part hidden somewhere close to the screen.
  It controls the backlight of the display.

  I think that this part needs to be replaced.

  In your case, I recommend you contact the ASP in your country. Why?
  Because first of all, you can order these parts to the authorized service partner and second guys could be very useful and may disassemble the laptop and replace the part.

  Greetings

• Satellite L500: internal display is dead - external monitor is ok

  I haven't used my L500 for about 6 weeks
  I tried to start it yesterday only to find "dead".

  I charged the battery overnight and I tried again this morning to find that my screen does not work.
  I plugged an external display that works, then I tried FN + F5 to switch between screens.

  The pc now only works in safe mode

  Help

  Hello

  It looks like a malfunction of the internal display.

  If the external monitor works properly, then I guess the graphics chip is ok too.

  In my opinion, there must be something wrong with the internal display.

  What do you think?

• Computer laptop 15-ac111TX: external monitor not recognized

  After completing the last HP updates, including a BIOS update computer restarted and now cannot recognize the external monitor. Have you tried another cable and monitor and video card setting never display monitors.

  Already tried a reinstall the video driver

  Hi @olliessbrown,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP ENVY laptop and problems with the HDMI does not properly. Try to use this update all the drivers who might not have are yet.

  Please let me know how it goes.

  Click the thumbs below to thank me for my efforts!

  Thank you.

• External monitor not connected - using mooring T500

  Hello

  I have an external monitor connected via my docking station.  It has worked very well so far.  Suddenly the computer does not find the monitor (no external monitor connected).  I see that the monitor is in power save mode - as it used to be when laptop was off.  When I unplug the signal cable, the monitor is powered - so there is nothing wrong with the power of the monitor.

  The incident happened in the following setting:

  1. I had a CD into the laptop when starting

  2. the Conference on disarmament began tearing before that my profile has been loaded (it looked like)

  3. I closed the top of the laptop when it was happening (normally it works very well and the external monitor appears).

  I'm at a loss what to do here and appreciate many clues.

  Tried to call my local support with no luck.

  CREDS

  Hello

  Found the answer to the problem.  Graphic design has been low (internal).  So I changed it to high performance and everything works fine.

  CREDS