Time and date with AM/PM - not military time.

Similar Questions

• Compare the current time and date with last modified?

  Compare the current time and date with last modified?
  
  What is the ideal way due to report at the last modified file with the date and time class? last modifed class in the file value is of type long.

  798642 wrote:
  No no no no, currentTimeMillis() only gets you the time... I need to compare the Date and time.

  You should read the docs more closely. It gives you the current time in time, which includes the date.

• Documents and data with all the storage on iPhone

  A few days ago I tried to send an email with a large attachment. However, it has not been send so I deleted my account from my iPhone. Once I did, I got a message saying that almost all of my storage has been exhausted. I checked to see and I have about 5 GB of available 64 GB. I connected my iPhone to my computer to check which took all this space and 45 GB of my space is being taken up by the Documents and data. I deleted the old messages, imported pictures to my computer and erased, erase my history on safari, check on iCloud, and allows to remove most of my apps that I have read that the removing applications and later re - download. I've also updated to iOS 9.3. It helped very little. Documents and data is now only 43 GB instead of 45 GB. Before that happened, I got about 50 GB of free and now I just 5 GB free after it happened.

  What else can I do to clear more of Documents and data? Should I restore my iPhone to one of the backups that I recorded? Should I take my iPhone at the Apple Store because it happened so suddenly and randomly?

  On the phone, go to settings App > general > storage & use iCloud > manage storage (in STORAGE). Who will provide a list of what applications use data and in what quantity. Tapping on the app with you give the amount of data, the application contains (less himself) and in most cases the ability to delete the application, if you wish. You will not necessarily have to delete the app.

  Once you have completed all the actions, try a forced reboot: hold down the House and on the buttons until the unit turns off. Ignore the cursor off if it appears. Once completed, if it does not start on it own, turn off power with the key On. In some cases, it also contributes to double click the Home button and close all applications before restarting.

  Also, actually iTunes sync erases some of this possibility.

  One last thing, if you have installed whatsapp, there is a known problem cases that it runs in fairly large amount of data storage.

• iPhone Documents and data - storage files do not match

  My iPhone running iOS 9.2.1 6 is showing the storage capacity almost complete when I sync via iTunes on my iMac. It shows (mostly music) data and applications to 51 GB more not less Go 61 of "Documents and data.  And of course, on the iPhone itself under "settings > storage" it shows 112 GB used and only 1.8 GB free.   The problem is, the list of applications and their consumption of storage under this summary shows just the music, pictures and my apps with just the 51 GB total storage.  There is no sign of the 61 GB, nothing for me to remove.  I saw many other threads on this problem and have tried the solutions proposed, including the removal and reinstallation of my email accounts. Also did a reset of the phone together. Any other suggestions please? Thank you very much!

  Did you check the settings/general/storage & iCloud storage use/manage? If you tap the apps listed, you can see the data stored in the "Documents and data.

• I can say and scrolling with touchpad can not zoom in

  Samsung notebook PC series, can point and scroll with the touchpad, cannot zoom or turn

  Hello Shelly,

  1. don't you make changes to the computer before this problem?

  2. is the question confined to the touchpad?

  3. you download and install the drivers of more recent and up-to-date touchpad on the site Web of the manufacturer?

  Follow these methods.

  Method 1.

  This tutorial is designed to help you identify and fix the mouse, touchpad and keyboard problems in Windows.

  Mouse, touchpad and keyboard under Windows problems: http://windows.microsoft.com/en-us/windows/help/mouse-touchpad-and-keyboard-problems-in-windows

  Method 2.

  Steps to zoom.

  1 - Place two fingers on your touch pad about an inch of distance.

  2. slide your fingers on the other while maintaining contact with the surface of the touch pad. The window will zoom in.

  3-lift your fingers off the coast of the touch pad when you have reached your desired magnification.

  Steps to zoom out.

  4 - Place two fingers on the touch pad to maximum distance each.

  5. slide your fingers closer together while keeping in contact with the touchpad. The window will zoom out.

  6-lift your fingers off the coast of the touch pad when you have reached your desired result.

  Method 3.

  Press "Ctrl + Alt + right arrow" to rotate the screen and touchpad 90 degrees.

  Press 'Ctrl + Alt + arrow up' to reverse back to normal.

  Let us know if you need assistance with any Windows problem. We will be happy to help you.

• How can I get rid of a popup telling me I have a virus Zeus.  It locks my screen and try to "erase the history and data, etc." does not work.

  I need help with a popup that locks the screen of my iPadAir2.  Go to the setting and compensation history/data does not work.

  If you have deleted the historical data and Safari Web site, and nothing is resolved, the problem is on the wireless router. Check your router wireless for possible violations.

• Create a Multiple Signature and Date fields with a custom toolbar button

  First of all, thank you in advance!  I'm a newbie script and I trudged my way through with very little experience with the scripts of any kind.  I'm good at taking and other scripts and them forming into something I need, but I can't seem to find something to do what I want.

  Use Adobe Acrobat X, I am trying to create a button in toolbar that I can press to create several signature fields and date with predetermined places.

  Here is the script that I have which strives to create a unique signature box, but I can't seem to understand the exact syntax to have this same button create several fields.  In total, it's 9 signature fields and 9 date fields must be created.  If you can give me just one example of what the button would look like with several scripts?  I'm assuming that I put multiple variables, then in ownership cExec toolbar button that I could just scream all these variables?

  var sigswm = "addField ('sigSWM', 'signature', '0', [108, 198, 494.64, 72])"

  app.addToolButton ({cName: "dotbutton", cExec: sigswm, cLabel: "place Signature and Date blocks",});

  Thanks in advance for any help you can provide.

  Billy Sweeney

  This is what works for me:

  function addSignatureAndDateFields (doc) {}

  Add a signature field and a date field

  var swmsig = doc.addField ('sigSWM', 'signature', '0', [108, 198, 494.64, 72]);

  swmsig.setAction ("MouseDown", "getField(\"dateSWM\").value = util.printd (\"mm/dd/yyyy\ ', Date() ");" ') new;

  doc.addField ('dateSWM', 'text', '0', [162, 72, 234, 54]);

  }

  app.addToolButton({)

  cName: "dotbutton."

  cLabel: "place Signature and Date blocks."

  cExec: "addSignatureAndDateFields (this)."

  cEnable: ' event.rc = app.doc; "

  cTooltext: "blocks of Signature and Date place.

  });

• Almost any time I use the usb climb on my computer (with flash or ipod players) it freezes and crashes windows. I am up to date with drivers with Microsoft and HP, what can I do to stop this?

  I have no problem with the usb drives but in recent times, this happens all the time.  I can go into Device Manager and uninstall my usb drivers and allows that, sometimes, but it's a temporary solution.  I am up to date with drivers with Microsoft and HP, what can I do to stop this?

  Hello

  You can try to use your boot USB storage device and check if that helps. A clean boot helps eliminate software conflicts.

  The following link has steps showing how to perform the clean boot. http://support.Microsoft.com/kb/929135  
  (1) perform the clean boot
  i. Click Start, type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  II. in the general tab, click Selective startup.
  III. under Selective startup, clear the check box load startup items.
  IV. click the Services tab, select the hide all Microsoft Services check box and then click Disable all.
  v. click OK.
  VI. When you are prompted, click on restart.
  VII. after the computer starts, check if the problem is resolved.

  (2) enable half the services
  (3) determine whether the problem returns
  (4) enable half of the startup items
  (5) determine if the problem returns
  (6) repeat the steps above until you find out which program or service is causing the issue
   
  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.
   
  Note: Please make sure that the computer is configured to start as usual by following step 7 of article http://support.microsoft.com/kb/929135 .

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  (i) click Start, type msconfig.exe in the start search box and press ENTER. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  (II) on the general tab, click the Normal startup option, and then click OK.

• I created a custom and registered with a specific name date format. However, when I open a new worksheet, my saved format does not display in the menu drop-down? Am hoping that I don't need to create the same format for each new sheet?

  I created a custom and registered with a specific name date format. However, when I open a new worksheet, my saved format does not appear in the menu drop-down? Am hoping that I don't need to create the same format for each new sheet?

  You must save the spreadsheet containing the new date as a model format and use this custom template for each new spreadsheet where you want that this date format personalized at your disposal.

• my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.

  my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.

  HI - try the following steps:

  On your iPhone close application of activity and also, if it runs in the background, the health app (you can close open apps, including the app shows):

  -Double-click the Home button, and then drag upward on each of the app previews to close.

  It can help to restart your iPhone and your watch. Turn on both devices off the power together first, and then restart your iPhone before restarting your watch:

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

  -To switch on: press and hold the side button until you see the Apple logo.

  If this does not resolve the problem, try next disconnect and rematching of your watch:

  -L'app shows on your iPhone shows backups automatically, including a new when the unpairing via the application.

  -Choose to restore the watch (backup restore) when provided the opportunity during the whole.

  -Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).

  - Pairing your Apple Watch and Support Apple - iPhone

  - Set up your Apple Watch - Apple Support

• A few days, I bought a mac mini which I transferred the data and programs with time machine: programs have been updated except for iMovie, and now it seems that I have to pay for the update: possible? What I am doing wrong?

  A few days ago, I bought a mac mini and I transferred all my data and programs with time machine: all programs have been updated but iMovie (7.1.4)... However, it seems that, to update to the latest version, I have to pay to download on Appstore: is it possible? what I am doing wrong?

  If it were a new mac mini, you need already installed 10.1 iMovie.  Otherwise, but you already have iMovie 9 registered version to your Apple ID, you can upgrade to version 10 for free, but if (as it appears) is an earlier version then you have to buy version 10.

  Geoff.

• Clock-calendar does not maintain the time and date

  The clock-calendar on my laptop does not maintain the time and date after I put it.

  Usually a sign that the bios cmos battery is defective and must be replaced

• I bought a laptop with a copy of the chrages of win 7 and won't let me not updated (didn't know at the time) if I buy the 8 victory will this solve my problem

  I bought a laptop with a copy of the chrages of win 7 and won't let me not updated (didn't know at the time) if I buy the 8 victory will this solve my problem

  You don't want to buy win8 until you have verified first this portable machine provides win8 drivers, or you ran the tool to advise win8 update.

  PS You are sure that your version of win7 is bad, or are you just a «can be victum msg»

  Your laptop has a restore partition hidden, from where you can restore you to factory State?

• time and date do not update automatically

  So I installed windows 8, there is not that long and I notice that my time still stuck after some time and I have to re - sync all the time. This gets really annoying. What can I do to fix this?

  Hi GadyBarak,

  Thanks for posting your question in the Microsoft community forum!
   
  Here are some steps that you can follow
  Method 1:
  Check the status of service time Windows.
  a. the office window, press windows + R
  b. type services.msc in the run window.
  (c) in the services window find 'windows time' and double-click it.
  d. If the service status is stopped, click Start, and then press ok.
   
  Method 2:
  Check if the date and the time zone is set correctly
   
  Try to restart the time service windows and check
  a. click on display time and date in the lower right corner.
  b. Select the internet time tab, and click on change settings and click Update now and press ok.
   
  Method 3:
  Check if the time is set in the Bios from the manual of the computer.

  If you are not comfortable to go to the Woods, contact the manufacturer of the computer

  If you still have questions, contact the manufactutrer from the computer and get the cmos, battery check.

   

  Note: changing the BIOS / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

   

  Hope this solves the problem. You can write back us if the problem persists and we will be happy to help you.

   

   

   

   

• Not able to compare dates with apex in tabular form point and point

  Hello

  I need some help

  Workspace: REEMATEST

  email ID:- [email protected]

  password:-reematest

  Application No.:-52796

  page 5

  I have a table

  create the table trial_master

  (

  Identification number,

  date of act_st_date,

  date of ac_end_date

  )

  I send you the ac_end_date and the id of page 5 page 4

  in a modal popup window

  all employees associated id is displayed as a table

  whose values are fethcing of

  create table trial

  (

  Identification number,

  date of act_start_date,

  date of act_end_date,

  VARCHAR2 (1) flag.

  number of res_id);

  My problem: -.

  on page 4, please see the plsql process

  Impossible to compare dates

  Hi Reema,

  Control your process,

  you compare with the value of the element to Date with date of beginning not with the end date that is why it is updating an incorrect value.

  changing your date in the code below, columns

  in lieu of f03, f04 replaced by State, check the modified process

  DECLARE
  
  L_ACTL_START_DATE  TRIAL_MASTER.act_st_date%TYPE;
  L_ACTL_END_DATE    TRIAL_MASTER.ac_END_date%TYPE;
  
  begin
  
  FOR i in 1 .. APEX_APPLICATION.G_F01.COUNT LOOP
  
  IF  trim(upper(APEX_APPLICATION.G_F04(i))) != trim(upper(:P4_END_DATE))
  THEN
  UPDATE TRIAL SET
      act_start_date = TO_DATE(APEX_APPLICATION.G_F03(i)),
      act_end_date = TO_DATE(APEX_APPLICATION.G_F04(i)),
      FLAG='Y'
      WHERE RES_ID = APEX_APPLICATION.G_F01(i);
  
      ELSIF  trim(upper(APEX_APPLICATION.G_F04(i))) = trim(upper(:P4_END_DATE)) THEN
  
      UPDATE TRIAL SET
      act_start_date = TO_DATE(APEX_APPLICATION.G_F03(i)),
      act_end_date = TO_DATE(APEX_APPLICATION.G_F04(i)),
    FLAG='N'
      WHERE RES_ID = APEX_APPLICATION.G_F01(i);
  
  end if;
  END LOOP;
  
  end;
  

  Hope this helps you,

  Kind regards

  Jitendra