Time capsule is not displayed but the work of WIFI connection
Hello
I have a Time Capsule 2 giga, which is used as a WIFI router connected to my normal router via Ethernet and an Airport Extreme, main, used as extension. Until today everything worked well.
Now, when I open the Airport utility to display the connection, it shows me that the TC and AE are not registered more (device not found). But I can still access the Wifi and internet via networks, I created, but not the backup.
I unplugged the TC and AE, reconnected them, reset, then the connection worked.
But now it is again.
Does anyone have the same problem?
Concerning
Unfortunately, this issue is not new and has been reported a number of times since OS X Mavericks.
AirPort Utility is based on both the mDNS (aka, Hello) and IPv6 IP protocols to find an AirPort base station.
When access to the airport through the AirPort Utility, try the following, in order, accessibility with the utility check after each step:
- Check the local connection. If you try to access the airport wireless, make sure that you are connected to its wireless network before running the AirPort Utility to administer it. If you are still unable to access it with the utility, temporarily connect your computer directly using an Ethernet cable to one of the base station's LAN ports.
- Try to access the base station using the utility file > configure other... option. Then enter the IP address of LAN - side base station (the default value is: 10.0.1.1) and password of the administrator of the base station.
- Make sure that the base station and your computer are configured for IPv6 link-local only.
- For a Mac: System preferences > network > Wi - Fi or Ethernet > advanced > TCP/IP tab > configure IPv6: link-local only
- For the AirPort Base Station:
Note: You may temporarily connect your Mac or PC directly to the base by Ethernet station to access.- From a Mac: AirPort Utility > select the base station > change > Internet tab > Internet Options... > configure IPv6: link-local only
- Since an iOS device: AirPort Utility > tap the base station > press Edit > tap Advanced > tap on IPv6 > change configure IPv6 to: link-local only > Tap actually
- The base station power cycle. Remove the power branch of the socket adapter and then wait 15 seconds before plugging back in.
- Perform a ' default ' reset on the base station.
- Finally, if you try to access the Airport via an Ethernet connection, make sure that your Ethernet port is NOT configured for Jumbo frames, that is, by using a MTU of 9000 +.
Tags: Wireless
Similar Questions
-
RH9: graphics are not displayed, but the fact of the anchored frame
TCS3/FM10/RH9
I'm a link FM books to my HR project. With the help of FrameSLT, conditionalized my graphics (contained in an anchored frame) on FM so that they are not displayed. It works very well on FM: there is no image and no image is anchored.
However, in the draft HR charts are displayed with sharps; they appear also with sharps in the preview. It's the way that it used to be in RH7. In FlashHelp, the graphics do not appear but the anchored frame is left behind, so I have a large white space where the graphic should be.
I thought that there was a way that you don't have graphics in the project in the first place. View the graphics in the project really slows down the update and generate processes. Why is HR still collect them if the graphic and anchored framework do not appear in the book of FM?
Thanks in advance.
It is about the other 'branch' Settings Conversion settings. The field is called 'Apply FrameMaker building conditional Expression' - check a blog by Matt Sullivan on Roundpeg on its use (http://blogs.roundpeg.com/2010/06/tcs-tips-for-conditional-text/) post
-
Button gif icon not displayed but the icon of the hierarchy tree.
Developer and oracle 10 g database
I was working on windows Xp and oracle10g on button icon and HTree worked very well.
After that, I installed windows 7 pro, in this icon of the window was not displayed.
now, even once, I installed windows Xp and run my existing form there is a problem I m facing Htree menu does not display icon but button is displayed.
I have set all parameters for the icon (gif file).
I checked again all the icons in the extract with Winrar jar filedefine formsweb jar file recreated jar file *.gif files. Jar -cfv icons.jar *.gif copy jar file into java folder edit registry edit regstry.dat it is record group SELECT -1, LEVEL, NODE, icon,S_ID FROM MENU CONNECT BY PRIOR S_ID=S_NO START WITH S_ID=1 order by to_number(s_id) -1 LEVEL NODE ICON S_ID ---------- ---------- -------------------- -------------------- ----- -1 1 MENU menu 1 -1 2 SETUP profile 2 -1 3 Location location 3 -1 3 Department public 4 -1 3 Designation info 5 -1 3 Shift abc 6 -1 3 Divisions house 7 -1 3 Transporter Trans 8 -1 3 Bank bank 9 -1 3 Leave_Type hospital 10 10 rows selected
Published by: 867210 on February 7, 2013 23:46Edit the Registry.dat file
First edit this default path and stop OJ4J and start and run form. default.icons.iconpath= if not working then try this default.icons.iconpath=icons
concerning
-Ahmed -
I try to copy and paste a picture of Word on a MacBook Pro, but it does not show. The cursor moves to the right distance to the bottom of the page and by positioning the mouse on the space shows that it is there, just invisible. I tried to reboot twice.
Thanks for any help!
It is the forum Pages.
Have you tried Microsoft Word for Mac forum?
Peter
-
Images are not displayed but the cargo space
Images are not displayed on any service. There is no empty box with a red X in the upper left. Any space where the image should be. This includes backgrounds and individual images. Even the buttons to link and change the font on this application do not appear to like what any other contours then.
Example: Facebook blue border of the Web page do not show, nor making photos into albums. It is the same with Internet Explorer and Mozilla.
In windows mail images also do not load and are left with empty space. This became annoying when links are included in the images.
Wasn't internet Explorer or whatever it is in the same direction. It has also affected Mozilla Firefox and it affected things offline as well.
I actually thought things on my own by poking around. It proved that under the "accessibility" Menu background images have been disabled for display by a person of limited view. It had been activated, and it turned out she had a far greater effect disabling more than background.
-
Don't know what you want in this space. Content of what?
Make sure you always have the "Bookmarks Toolbar items" on the personal bar
- Make sure you have the 'personal bar' visible: "view > toolbars".
- Check in "view > toolbars > customize" "Bookmarks Toolbar items" are on the personal bar
- If the "Bookmarks Toolbar items" is not on the bookmarks toolbar, then get it back from the window Customize on the bookmarks toolbar
- If you do not see the "Bookmarks Toolbar items" then click on the button "Restore Default Set"
See also:
-
Satellite C70D-A-111 - cannot print using network printer but the work of USB connection
I added this Satellite C70D-A-111 to an existing network that includes a printer.
Other devices can print OK but not this Toshiba.
The message is "printer is in an error state.If I connect the Toshiba to the printer via the USB port, it prints OK.
Can someone point me in the right direction please?
Do you use this printer at home or in your business?
I mean if use you it in your business ask for administrator assistance system. -
Time Capsule will not extend the Airport Extreme network
My airport extreme (do not know what version... can't even find it in the system report) offers a WiFi modem. I have a Time Capsule 4 G which extends the network. This works well for a few years now. Suddenly, the CAP began flashing yellow. Time capsule said Airport utility cannot extend the network and I should make sure the password is correct, that it is in the signal of a network, etc. I went through the settings of the time capsule by ensuring that passwords are correct. It is certainly within the range of the signal of the airport extreme (they are both in the same place as always... Besides, I put my iPhone next to the time capsule and I get a signal strong). I tried a hard reset of the time capsule. Of course, this does not work.
Time Capsule seems to be communicating with the computer very well. I can access it via the Airport utility and reboot. I can access the data on its disk backup. Airport Extreme is to give a signal of good wi - fi connection. I'm still able to pick it up with my computer (even if my computer is far more than the time capsule).
Someone has an idea of what's going on?
Given that the Capsule does not correctly connect unless everything is OK with the AirPort Extreme... I suggest that you turn off the time Capsule for now and check that everything works correctly on the AirPort Extreme.
My airport extreme (do not know what version... can't even find it in the system report)
You say that the AirPort Extreme does not appear when you open AirPort Utility?
If so, press and hold the option on your Mac key while you double-click on the image of the AirPort Extreme.
Model of the AirPort Extreme, you will appear at the top of the summary page. What is it?
Near the bottom of the summary page, check to see if there is a parameter that is displayed for the State. If there is, what is the message next to status?
-
I have a problem in my computer, its not display hidden files and folders. In folder options, I tried to check SHOW the FILES AND FOLDER CACHE and click on APPLY and OK but it does not work. Still hidden files are not displayed. but when I opened again Folder Options the one that is chosen is DO NOT DISPLAY the FILES AND FOLDERS HIDDEN. Several times I did but the same stills. I am logged in as administrator. How can I fix? Please tell me the solution and tell me is it caused by virus or not?
Hi ZohaibJamil,
If you have one machine to another,
Then, click Run, type Regedit, go to the next topic & select export.HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Advanced\Folder\Hidden
Copy the file on the problematic machine, double click on it & select Yes.
If you do not have another machine,
Navigate to the registry entry above & change the values as below:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Advanced\Folder\Hidden
NOHIDDEN - Checkedvalue (2)
DefaultValue (2)
SHOWALL - Checkedvalue (1)
DefaultValue (2)
That's all!
-
I use Firefox as default browser v10.0.2 on Dell XPS8300 Intel Core i5 and Windows 7 Ultimate and Compaq Presario CQ57 IO IO Intel Core i3 and Windows 7 Home. More frequently on the (approximately 90% of attempts) that Dell (50% of attempts) Firefox will not display on the screen when I click the icon. Cannot display other programs when it happens. I expressly say display because I believe that Firefox has started. To work around the problem, I installed Process Explorer on both machines and launch this program first, then click on the Firefox icon. When the problem occurs I see process Firefox.exe in the list of processes; some CPU consumed but, then, no CPU activity. If I click on the Firefox icon, yet another process opens in the list of processes, but with the same answer - some consumed CPU and then no CPU activity. If I have 2 processes running and kill the process from the 1st, the 2nd poster and then everything is normal. If I do not open it treat a 2nd, but kill the 1st process then click the Firefox Firefox is displayed and all then is normal. This problem has occurred since the original on the two new machines installation. I have updated the video drivers on both computers.
OK, let's see if we can solve this problem and make it work for you!
First of all, if you start Firefox in safe mode (restart your computer first, then when you open Firefox, hold down the SHIFT key) it starts more reliable? This is usually caused by a defective module. If this does not help, then restart Firefox, go to the Firefox, then add-ons button and disable your extensions one by one until you find the troublemaker.
Also, try to update to Firefox 11, it has several bug fixes that might make life easier here.
Just as a few troubleshooting steps base to ensure that we have all the bases covered,
Run all Windows updates, install all required service packs, etc.Update all of your plugins (Flash, Java, etc.): http://www.mozilla.org/plugincheck/.
Download and install MalwareBytes Anti-Malware, run a full scan. http://www.malwarebytes.org/. This check allows that there is no virus on your computer, causing problems. You can uninstall this program after having cleaned the infections.
-
How can I make sure my internet cable works even if the icon is not displayed by the clock
I see the wireless connection icon, but I used to see one for the wired connection also. So where is it?
How can I make sure my internet cable works even if the icon is not displayed by the clock?
Click Start > Control Panel > network and Internet > network connections.
Click with the right button on your Local network, and select Properties. In the window properties of LAN make you that these boxes are checked.
[] Display the icon in the Notification area when connected
[] Notify me when this connection is limited or no connectivity.
Click [OK] and get out of here!
Right-click on start and select Properties. On the taskbar and Start Menu click the taskbar tab, and then click the Customize in front of the Hide icon button inactive and it make sure that the option 'always show' for the local network is selected.
HTH,
NASS - http://www.nasstec.co.uk
-
I get emails with pictures and when I send them to others. they open
their place but the images are not displayed. The photos are there when I send a
them. Thank youMake sure that your security software (antivirus) is not blocking attachments.
-
After the upgrade to Firefox 6.0.2 first flash content was not displayed, but now the plugin does not load. Firefox plugin check says Flash is obsolete, but I just downloaded it from the Web site.
Mac OS X 10.7.1
Firefox 6.0.2
Flash 10.3.183.7The current versions of Firefox are 64-bit on OS X, if you need a 64-bit version of Flash with Firefox 6.0.x or you must start Firefox as a 32-bit application to be able to use a 32-bit version of a plugin.
- Closing of Firefox
- Launch the Finder and open the Applications folder
- Make a right click or Ctrl-click the icon of Firefox.app
- Select "Get Info."
- Select or deselect the option "open in 32-bit mode".
- Close window "Firefox Info"
- Restart Firefox
-
I have a small handy device the company Sony. The name of the template is - Cybershot. It is 10.1 megapixel with screen 7 cm square. When I connect it to my PC of countertop, it is not displayed on the PC screen. I have already installed the software, I received with the device of the company. For a few months, he was allowed and eventually I had my PC formatted by a technician and then, he stopped the display. I asked the technician if he ruined the camera software, he said no, he has not touched the camera software. I bought the new USB wire to fix the problem. But it is still not resolved. Can someone give me the reason why the camera is not displayed on the screen of the PC?
Hello Manu,
1. have you checked if the camera software is present on the PC?
2. are you able to connect other USB devices to the PC?
3 have you tried to connect to other USB ports?Open the list of programs by clicking the Start button, click Control Panel, clicking programs, and then clicking programs and features.
You can try the following methods
Method 1: As the PC was formatted, the software of the camera could have been uninstalled. If you cannot find the software of the camera, I suggest you to install.
http://eSupport.Sony.com/us/p/select-System.pl?PRODTYPE=7Method 2: If this does not help, connect your camera in a different USB port and check the status.
Install a USB device
http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device
What to do when a device is not installed correctly
http://Windows.Microsoft.com/en-in/Windows7/what-to-do-when-a-device-isn ' t-installed-correctlyMethod 3: follow also, troubleshooting of this article:
Troubleshoot camera connectionhttp://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems
Follow the steps and let us know if this helps. If the problem persists, answer and we will be happy to help you.
-
Hello, I downloaded a new Web site, but all the svg files are not displayed on the browsers. When I opened it in Muse with the "Preview in browser", its fine! can someone tell me please where is my problem? (Sorry for my English!)
Hello
Could you please check this thread, it might be useful
Maybe you are looking for
-
I bought an IMAC in January. Now MacPro won't updates. Help! Vicky L. < personal information under the direction of the host >
-
My iPhone 6 s + began to remove photos from photo stream when I remove them from the film
This habit never to arrive and if I understand correctly this is not supposed to happen. Any suggestions?
-
Reflection of purchase Satellite C855-226 - need to know more
Hi all This is my 1st msg here :) I think buying C855-226 to 529 and Saturn then offers C855 - 2 EV at 477, which is very cheap and most of the boxes ticks for me who are: price, hd capability, CPU, ram max, the thing that I dislike is the size and w
-
Help: E INTERNET EXPLORING down
I have a Compaq Presario V2000, which was made in 2004 and there is never any problem with this laptop. Now all of a sudden when I connect to E Internet Explorer it gives me an error message that indicates that internet Explorer cannot display this w
-
I recently deleted, uninstalled, arrested as many apps as I could to try to get in inconsistent application to run on my Acer One 7, B1-730 HD. Now, I need to rebuild things. I realize that nessasary apps have no uninstall. But I want to assure you t