Time clock change year. __

Similar Questions

• Satellite P100 - time clock keeps changing

  The clock on my Satellite P100 continues to change (running Win XP MCE) randomly during the day while it is running.

  When I start the PC in the morning, clock's time similar to when I turned off the day before.

  I use my PC in my office connected to the power supply. For the first months of ownership I left battery off the computer because I wanted to preserve his life. I don't want to run on battery and go through a process of charge-discharge throughout the day while I'm working. I was wondering if this could be the problem and now keep the main battery plugged all the time but the clock still continues to change.

  The clock doesn't change by specific hours, but at some point almost randomly sometime before the correct time. Sometimes a few minutes, sometimes hours.

  I installed and run all of the last anti-virus, spyware etc etc and nothing is detected.

  Looks like my faulty CMOS/RTC battery?

  This is my work computer and I can't afford to be without it for more than a day. I don't want to go back with all my data on HDD business.

  Someone knows how it is easy to replace the RTC battery yourself (I know it will void the warranty)-I am an experienced PC "Builder" and fortunately can disassemble computers etc.

  I hope that someone can offer some advice. Why Toshiba is not a help line that you can ask for help?

  Hello

  Maybe it's not a RTC battery problem, but the problem of BIOS?

  I found this Toshiba on a resource conflict real time clock in the L100 and P100 notebook Device Manager
  http://support.toshiba-tro.de/KB0/TSB7301SU0005R01.htm

  It is very interesting, if this resource conflict could have a bad influence on the time of windows.
  Check it!

• External sample clock change takes a lot of time on the SMU-5186

  Hello

  I use the external Lv - niScope EX Clocking.vi example to define SMU-5186 using an external sample clock.  However, it takes a long time, 5-6 minutes, before I can get the first block of data acquisition.

  Then I run the example 'niScope EX Acquisition.vi Configured' to switch to dashboard clock. There are also 5 to 6 minutes on the first acquisition.

  I think maybe the SMU-5186 made some calibration when I change the source of the clock.

  Anyway is to ignore the calibration? Or make it faster?

  Thank you very much

  Yiming

  Yiming,

  Delays in acquisition are caused by calibration routines that must be performed on the engine to sample (ADC) every time that changes sampling rate.  This ensures our justified precision specifications.

  I don't know if you've noticed also calibration of Power-Up, which will take 5-10 minutes to complete when the unit is turned on.  This is mentioned in our specifications at page 18:

  http://www.NI.com/PDF/manuals/373257b.PDF#page=18

  I hope this helps.

  Nathan

• Standard user changes time clock to circumvent the time limits set in the parental controls, how to stop this?

  Original title: clock change

  I put deadlines for my daughter in the parental control. my daughter just changed the clock time to get around this. It has a standard user account and I have the password to the administrator account, which she could not possibly know that I keep changing. How does do and how can I stop this happening?

  The date and time system can be changed using a control panel applet - timedate.cpl file.

  If you have the administrator account, you can refuse his user account access to the said folder.

  1. go to start > type cmd > press and hold shift + Enter (this will open CMD with Admin Access)
  2. on your type CMD in the command below

  Cacls timedate.cpl /p : n

  3. press ENTER.

  The command will refuse access to user account in the file so that it could not change the time and date.

• Date and time of change in Windows XP?

  So I have a Windows XP desktop computer. I shut down my computer, unplug it, put on an hour later, nothing happens. But sometimes if I let him stop for too long, as day 4 or more, it will be displayed this error message on the image below:

  http://img541.imageshack.us/img541/2831/img9347b.jpg
  I set the time for the computer at the right time, but after leaving it too long, stop the computer reset the time until the year 2000, but nothing else is touch (my files, settings, etc.). Although this doesn't bother me, just click on OK each time this summons and that changes the time thereafter, but I want to know is there a way to solve this problem.
  In addition, as I said, I always disconnect my computer when he was arrested. Maybe the battery into the computer (I saw one time when I opened the case to another computer) is not charged enough?
  Thanks for the reply.

  It is certainly because you have to replace the battery of the time clock (RTC) real (also called the CMOS battery or the BIOS battery).

  If you have a desktop/Tower computer, battery replacement is easy and inexpensive.

  If you have a laptop, it may be easy & inexpensive or it could be difficult and expensive.

  Typical desktop/Tower battery is a "coin cell" battery number CR2032 available at your convenience corner or pharmacy (USA):

  

• Satellite Pro M30 - real time clock shows wrong time

  Hello!

  most of the time I am using my Toshiba satellite pro m30 without the battery with the energy of the power system. the battery is stored somewhere outside of the computer for a month the real time clock shows a bad time if the computer is started after a period of time.

  I think my cmos battery is going to die soon.

  someone has an idea, how this cmos battery can be changed by myself?

  Thank you
  Reinhard

  Hello Reinhard

  I agree with you. It is time to replace the CMOS battery. It is not easy and the machine must be dismantled. If you are not familiar with the procedure for disassembly, it can be dangerous. A small mistake can result with damaging material.

  If you want to do it alone, you do so at your own risk. Be sure to use the right battery. Maybe you won't believe, but if you use a battery hurt it could cause battery explosion, or other damage.

  I'm not 100% sure, but the RTC battery must be placed on the left side near the touch pad. If you want to only please be very gently. The laptop parts are very sensitive.

• My Airport extreme and Time Cap. both lasted 14 months, what happens with that. Time to change brands?

  My last two routers in Apple both lasted 14 months more I had an arrival of DAO. Of course, both just went out of warranty. My current A.E. seems must be reset to zero every day even if it is shows that it works, my devices loose their connection. Rebooting solves the problem for a short period. Hard and soft resets it have done and that does not help.  Now, the yellow light flashes and the utility Airport says that it may be overheating. I just it's time to change brands.

  Your Apple router is covered by the Applecare, extended warranty on a computer, ipad, or apple TV.

  The program is quite generous... you can buy an apple TV now (Gen3 is fine) and buy on what is cheap apple care. It covers all airport bought up to 2 years earlier. So take your defective AE at the apple store... Buy Apple TV and its applecare... do not open the Apple TV... Get your replaced AE... Then, get a refund on your Apple TV. It's a little sneaky, but only if you don't have applecare...

  In the European Union or many other countries... There are in your laws of the consumer that Apple must meet the provisions of warranty... And 14 duration of life is not good enough.

  There are many problems with the current series of AE and TC.

  Constantly wireless of does not... power outages of power.

  My first TC was like yours... not quite DOA, but it was defective out of the box and lasted a week total.

  Secondly, one was poor wireless. My oldest Gen5 AE and Gen4 TC have been much faster.

  Third go was very well. (At least on this point).

  If you want something better watch the top selections here. You will find the AE list... a long long way down.

  http://www.SmallNetBuilder.com/tools/charts/router/bar/113-5-GHz-DN-c

• HP4530s: HP4530s - time to change the thermal paste

  Hi all

  can you please help me to decide if now is the time to change the thermal paste on my processor on laptop HP 4530 s. I have this laptop for almost 5 years now and lately I noticed significant overheting. Of course, the fan is always on. Home, take a look at the screenshot of Speedfan application. As you can see Core 0 (I guess that's the CPU and sometimes reaches more than 60 ° C).

  Since the fan was cleaned not so long time ago, I thought I'd give laptop to some experts to disassemble, remove the radiator and change the thermal paste. I've seen many of these videos on you tube.

  I have win 7 pro installed on this laptop and is mostly used for surfing the web, MS office and youtube.

  What is your opinion?

  Thank you!

  Thank you for your help Hüffer. I also found on many places that these temperatures are almost normal. However, given that the laptop is almost five years I decided nevertheless to change thermal past and for cleaning the air in detail.

  Is there not a lot of dust in the fan or heat sink. My firend exchanged thermal paste and after the test, the results are given in the following picture. Core0 temperature never exceeds 50 C. The test is carried out after an hour with the same content to youtube. The lapopt is not really hot on the side left (where are placed HDD and the heatsink) more. I think it was the right thing to do, something like a review.

  

• Windows time always changes

  Hello

  Lately, I have a problem with my vista sp2. The exact time is 29 March 2013 12:23 AM. Yet, if I stop vista for an hour or more, when I restart the PC time system strangely transformed in March 11, 12:00. I have reset on the exact time, but if I stopped it, it will change again for another time, say 2 agusts 2013 23:00, and so on.

  I if it stops and it reboot after a few minutes, the time is correct.

  Comprehensive analysis of MSE can't find anything.

  I am confused, can someone help me?

  Thank you

  Low battery can keep the date and the time of change of random dates and the times. The information you have provided your motherboard is six years old (and the battery was built before the motherboard), two scanners showed no malware, so I think it's time to replace the battery.

  Jim

• Using AS2 to get the time and change according to result

  I need to make any changes to a flash projector which was built recently that changes of what is played according to the time of day. It is used to announce the breakfast or lunch/dinner for a restaurant. Previously we had put in place so that the time change happened at 5 in the morning and 10 o'clock in the morning. The code is below. The restaurant wants to change the time switch to be now at the half. I know how to extract the hours and minutes to do.

  This is the code that I've been using

  var currentHours:Date = new Date();
  var currentMin:Date = new Date();
  
  
  timeInHours = currentHours.getHours ();
  timeInMin = currentMin.getMinutes ();
  
  
  var today: Date = new Date();
  shownow = now.setMilliseconds;
  
  
  
  
  If (timeInHours > 4 & & timeInHours < 11) {}
  breakfast_mc._visible = true;
  breakfast_mc.play ();
  dinner_mc._visible = false;
  dinner_mc.stop() ;
  / / trace (timeInHours);
  } else {}
  breakfast_mc._visible = false;
  breakfast_mc.stop ();
  dinner_mc._visible = true;
  dinner_mc.play() ;
  / / trace (timeInHours);
  }
  trace (timeInHours);
  trace (timeInMin);
  Stop();
  Clips of film of breakfast and dinner have this code in them, as well as at the end of each cycle, it checks the time and switches.
  I found this code on Flash Kit, and wanted to try to change it, my hope, was so that he could generate a delay of 24 hours 1604 or 1029 I could then do a comparison <>/ with, but this function adds the numbers then 16:15 = 31 and 12:19 = 31 also. Does anyone have any suggestions on how I can do this
  ? I need time to change at 05:00 and 10:30.  There is a possibility that they will want to extend out to include the day of the week as well. Now I just need the fractional hours for works well.
  function checkTime()

  {

  dat var = new Date() ;

  var h = dat.getHours (); / / 24-hour format is already...

  mn var = dat.getMinutes ();

  / turn to the last limit of 15 minutes /

  //mn = Math.floor (minutes/15) * 15;

  
  

  / / OPTIONAL - add zeros to the hour and minute

  if (hr < 10)

  hr = "0" + hr;

  if (mn < 10)

  mn = "0" + mn; / / remove these last 4 lines if the zeros not significant not due not
  
  
  retour hr + mn ;
  }
  
  
  usage example:
  time = checkTime();
  trace (time);
  Any suggestions are welcome. Thanks in advance!

  If you want to do something when the user time is between 05:00 and 10:30, use:

  var d: Date = new Date();

  If ((d.getHours () > = 5 & d.getHours ()))<10) ||(d.gethours()=""><>

  No matter what

  }

• I have used IE first time in 3 years. I have READ the screen without my glasses. I didn't know that Firefox FONTS were 'low' tried almost everything to get Firefox fonts look as "BOLD" and clean. Failed. Ideas please.

  I have used IE first time in 3 years. When I did, I could READ the screen without my glasses. I didn't know that Firefox FONTS were 'low' tried almost everything to get Firefox fonts look as "BOLD" and clean. No luck.

  How can I get Firefox to DISPLAY a more clear and clean police as Word? I choose different fonts in Firefox and sizes and nothing is really happening.

  You have clearly Type is defined on your system?

  • See-> http://support.microsoft.com/kb/306527

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• Several times during ≥ 3 years the number pad on my keyboard stopped working.

  Several times during ≥ 3 years the number pad on my keyboard stopped working. This problem has covered ≥ 2 different versions of OS X, the most recent event: El Capitan, first event: Lion or Lion of Mt.; door only on the pavement &. [DOT] & ENTER [the top row keys are OK because r =, /, *, -, +, & ENTER.]

  Machine was born @ 2012; the details are below & pulled... iMac > material file.

  Model name: iMac

  Model identifier: iMac12, 1

  Processor name: Intel Core i7

  Processor speed: 2.8 GHz

  Number of processors: 1

  Total number of Cores: 4

  (By heart) L2 Cache: 256 KB

  L3 Cache: 8 MB

  Memory: 16 GB

  Boot ROM version: IM121.0047.B23

  Version of the SCM (System): 1.71f22

  Serial number (System): D25FX1WLDHJT

  Material UUID: 1AAD5CA2-316C-5453-9A0A-2A0F3F2B8946

  I pressed @ each assortment of keys & combination of buttons & have not been able to restore a digital key function. What happened to 2 x before. Whenever I accidentally pressed the super-secret key combination to induce the restoration. I suspect the same or similar to the combination, I pressed to screw it up in the first place. I looked in the various pages of PREFERENCE: keyboard > sources of input, and al. Notice to lovers in the Department for help. My only condition is please do not too stupid to me. Thank you, community.

  Please make an appointment at the Apple Store - Genius Bar store and bring it into service. If you are in the United States or is unable to make an appointment in this way, contact your Apple store.

• Skype phone with none his first time in 4 years. Not muted.

  I have a Skype phone pair phone 6.0 dect, and lt went Mute while talking. Everything done to get itback. Reset computor alsol first time in four years. STI has phillips. Ive rest sounds all over the place. IM lost, HE signed yet.

  (deleted number)

  Hello

  Check with the support of Skype and their forums.

  Skype - Support
  https://support.Skype.com/en-us/

  Skype - Forums
  http://Forum.Skype.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Password - Windows XP is invites me for a password for the first time in 6 years

  Windows xp wonder for the first time in 6 years for my password. I forgot. Help

  To the pc startup or restarting the pc, key to tap the F8 (safe mode), select access xp in safe mode.

  Select this option to enter xp like 'Administrator', once under xp, open user accounts, delete it

  password, out xp & restart the pc.

• Why my computer date and time keep changing to 01/01/2003

  I change the date and time of my lap top, according to the laptop for a while and turn on the date and time continue to change to 01/01/2003. I have not so much time to change, but... his problem keeps up to date of the.

  Looks like your laptop CMOS battery needs to be replaced.  It is not the same battery that powers your laptop.  It is usually a battery of lithium-manganese dioxide of small coin shaped that resemble the shows big battery.  You should consult your instructions of the manufacturer on how to access and what type of battery is needed to replace it.

  A simple call to your computer manufacturer should provide all the necessary information.
  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.