Date and time of change in Windows XP?

Similar Questions

• Why my computer date and time keep changing at 01/01/2008

  My friend has a computer problem.

  The date of his computer does not change since 01/01/2008, today's date. After the formatting as system, it is facing the same problem. He tried to change the date through the configuration of the BIOS. But after the reboot, the date is still helping 01/01/2008.Please. He got windows 7 ultimate SP1. Thank you for your patience for reading this.

  There is a battery on the motherboard that stores configuration information, including the date and time.  It seems that if this battery should be replaced.  Check motherboard of your friend or the system manual for more details - the battery is usually very inexpensive and easy to replace once found.

• Date and time of change of batch

  Mac running El Capitan with the latest version of Photo

  When I try to batch change date and time on some old 50 photos that have been digitized on days different and downloaded in the library of my pictures the results aren't good. The days and hours can vary a lot.

  When I checked and changed a lot of photos that have been taken or analyzed the day everything seems to work fine. Why? Is there a simple work around?

  If you do not change the dates butare, added dates for digital photographs (Digital Photos do not have EXIF/IPTC data then do not use the control change time data - using the user script Script: batch change Date and time on a fixed Date )

  LN

• Why my computer date and time keep changing to 01/01/2003

  I change the date and time of my lap top, according to the laptop for a while and turn on the date and time continue to change to 01/01/2003. I have not so much time to change, but... his problem keeps up to date of the.

  Looks like your laptop CMOS battery needs to be replaced.  It is not the same battery that powers your laptop.  It is usually a battery of lithium-manganese dioxide of small coin shaped that resemble the shows big battery.  You should consult your instructions of the manufacturer on how to access and what type of battery is needed to replace it.

  A simple call to your computer manufacturer should provide all the necessary information.
  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Open a session and the date and time of errors in Windows Vista

  Cannot logon on.keep try and finally, through the use of the Media Direct button get a date and time messagethat eror arein error and then F2 screen system and year, correct date and time, then regular diary on the works. If I logout using the closing of the same happen when I try to go back on, screen white, persevering, error message about the date and time, etc.
  If I get off using 'sleep' can come back on the next time I do not know if this is recommended all the time.

  Hello

  Method 1:
  You can check the link provided and check:
  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  Method 2:
  You can update the BIOS (Basic Input/Output System)... You may need to contact the manufacturer of the BIOS update

  WARNING OF THE BIOS:
  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• Date and time of changes every time when I turn on the computer.

  Why dose date computer and changes each time I turn it on time

  Original title: modification date and time of the computer

  Usually because the battery cmos is a failure

• Date and time of change every morning to 01/01/2006

  every day the same problem. I have change the date, time and set the time zone (London), it works fine all day. Next day, back to 01/01/2006. Help, please...

  You shut down your machine at the end of each day?
  If so, you probably have a dead motherboard battery.
  Go to your computer manufacturer's website and download the manuals for your computer.  One of them should explain how to change your battery.

  HTH,
  JW

• IDS 4215 date and time change after restart

  Hello

  I am facing problem with cisco IDS 4215 (version 6.0), date and time of change in the device after reboot. What is the command to save the configuration. record or write mem does not work.

  Amarjeet Singh

  Once the date and time changes are applied Cisco IPS CLI, they should have been saved. No additional step of "savings" manually is necessary.

  Also, have you thought about Configure NTP on IPS server. IPS synchronizes time with NTP server, if there is no difference.

  I suggest you contact Cisco TAC and report the problem of equipment.

  Kind regards

  Sawan Gupta

• Date and time display on the workspace

  Is it possible to display the date and time on the workspace window?

  An example of a control that you can add to the workspace to display the date and time on your host PC is attached. I created it by following the instructions on this page. If you want to make any changes or customize it more, this document can help you get started. I based off of decoration - free label template, so that I could completely customize the behavior of the control.

  To use this control, simply copy \National Instruments\NI VeriStand models 2011\Display to .

  

• Photos do not sort by time when the Date and time are adjusted

  I'm the combination of images of my friends with those friends, using Mac Photo of OS X V10.11.4. Because the dates of our cameras vary, I used "Image, set Date and time" to change the dates of the imported pictures. When the dates and times are adjusted, the photos are sorted by date no time. Added photos changed the given date are sorted at the end, regardless of time stamp. The sort options in the pictures leave much to be desired.

  Where are you seeing this? All the photos are sorted by date/time, the photo has been added to the library - Photos (years/collections/moments) are sorted by date/time pictures

  You can select the photos of interest and create your own album of them and then sort but title ascending or descending or by date

  LN

• HP 8600 by USING WINDOWS XP PRO - HOW to REMOVE ADMIN BLOCKS ON the CHANGE SETTINGS of DATE and TIME.

  MOST OF MY SETTINGS IS "LOCKED". DO NOT KNOW WHY. HOW CAN I REMOVE THE LOCKS TO ZERO HOUR, DATE, ETC?

  Locking the settings would be monitored through the EWS (built-in web server) to the printer.  The lockout is really designed for printers Officejet to prevent others to perform printer changes that could affect the behavior of the printer.  For example, to keep the date and time the Fax value see him exactly receive time.

  Get the IP address of the printer by pressing the network icon at the top of the screen.

  Enter this IP address into the address bar of a web browser on a computer.  Printer status page should load.  If you receive warnings of certificate, choose the option that allows you to continue anyway.

  Click settings and then go into settings of the administrator on the left.  Many of the features of the façade are ordered here.  Make sure everything is checked except control lock.  Once it is defined, click on apply.

  Power off the printer for at least 1 minute and power then turn it on again to force the new setting to take effect.

  You can also try to set the date and time under preferences on the left of the settings page, but it seems that the problem of locking is more widespread than the date and the hour.

  The Admin settings page should look like this screenshot when it is set up the way it should be.

  

• Satellite Pro 6100 - how to change the date and time in the BIOS

  Hello

  I received a satellite pro 6100 that had not been used for some time. Windows does not work then he reinstalled with the good drive.

  When I try and windows 'enable', I get the error 32777 and the laptop is unable to connect with the activation servers that a google leads to believe me that the date and time are incorrect in the bios.

  I know that Press esc to access the bios but there is no option to change the date and time in there. I put the date / the correct time in windows, but this does not seem to synchronize with the bios. I've updated to the latest version of the bios, but this is not enough.

  How can I change or update the time in the bios?

  Thank you

  Hello

  I doubt this time and date setting BIOS does affect Windows activation time Windows doesn t affect it in my opinion. There must be another reason for this problem.
  You can activate Windows by phone?

  Normally the date and time in the BIOS can change you if you mark the date or time, and then press on + or - to change this. Sometimes you have to press PageDown/to the top according to the model of BIOS or laptop.
  Usually in the configuration of the BIOS you will find a brief info how changing the values.

  Check this box!

• Changes of date and time when you go to the line

  On the date and time to start on the computer is fine.

  When I go to the line for a unknown reason date and time moves forward 12 hours. This happens not always as some time it will be presented one, two or three days without change.

  Very frustrating because it affects the majority of the applications where the date and time are referenced.

  I'm missing something in the settings of date and time.

  [Moved from the forum comments]

  Hello

  -What operating system is installed on the computer?

  If you have installed Windows 7, you can run this Microsoft Fixit and check if that helps.

  Difficulty of broken desktop shortcuts and common system maintenance tasks: http://support.microsoft.com/mats/system_maintenance_for_windows/?wa=wsignin1.0

  Additional information.

  Set the clock: http://windows.microsoft.com/en-in/windows7/set-the-clock

  Thank you.

• cannot change the date and time in the system restore

  How can I change the date and time in the system restore? When I try to create a new restore point, I can't change the date and time, the system automatically date and time in.

  System Restore will always set the date and time of any restore point created at the effective date and time of the machine.

  If you want to restore your computer to a date and an hour earlier, you must select restore from a restore point that was created at the earlier time.  This article explains how.

  With the help of the Windows Vista system restore
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  My apologies if I misunderstood your question.  Why should change you the date and time when a restore point was created?  The only possibility of achieving a fictitious date and time will result in a change as actual date and time Windows or in the Bios, either option with unforeseen consequences.

• Date and time system continues to change each time the system starts.

  I noticed that the time and date of my home PC gets changed every time the system is booted. The default date is set for Jan. 2008, when in fact it should be July 2014.

  Also, my PC became slow death. I use Windows 7 on 1 GB of RAM, 250 GB PC. I used last my home PC 2 years back, but there has always been someone to use it.

  It shows the OS disk to 7 GB of free, when in fact I never installed or anything unnecessary stored on the disk of BONE; Whatever unnecessary programs were there, I uninstalled them recently, keeping just a few essential ones. After uninstalling, it shows to 7 GB of free, when in fact it should be more than that.

  I use Avast anti-virus, which I think is unnecessary, that its not to protect my PC and as other programs, too, is quite dead slow.

  The system is infected by viruses? Manually, I checked the system for viruses and clean the system of all unnecessary and, program files, but I'm still not sure whether it is a virus or a PC problem.

  I am a COMPUTER analyst, and's just done it 2 days that I use my PC at home. I could format my PC, or where applicable be buy Windows 8 with a new processor.

  Please advise.

  Thank you and best regards,

  Ralph Davidson.

  Hello

  You really need a minimum of at least 2GBs of RAM to run Windows 7 well enough.

  As you have only 1 GB of RAM, which seems to be one of the reasons why it is slow.

  Increase the physical RAM or try ReadyBoost:

  http://www.bleepingcomputer.com/tutorials/using-Windows-ReadyBoost-to-increase-performance/

  Looks like you have some problems.

  Wrong Date/time

  If after you set the Date and time, and then stop and restart your machine and the time returns to the year 2008, and she did this whenever you reset, then restart the PC you have a CMOS battery has failed in the motherboard.

  They cost about $5 and are easy to replace.

  How to replace a CMOS battery.

  http://www.computerhope.com/issues/ch000239.htm

  ________________________________

  For hard disk space:

  This free program allows you to see what is taking place.

  http://www.Jam-software.com/treesize_free/

  Also check how much space system restore uses:

  http://Windows.Microsoft.com/en-us/Windows7/how-much-disk-space-does-System-Restore-require

  _____________________________________

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  _____________________________________

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  ____________________________________

  And for general maintenance on your machine:

  You should have used Malwarebytes in previous advice here on hard drive

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware and if necessary make mode safe mode with networking: AntiMalware and if necessary do in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  'Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows/Advanced-startup-options-including-safe-mode#1TC=Windows-7

  _______________________________________

  And also scan with the free version of SUPERAntiSpyware

  http://www.SUPERAntiSpyware.com/download.html

  SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

  SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

  ______________________________________

  THS is a very good program to scan your system to remove adware, etc.:

  http://www.bleepingcomputer.com/download/adwcleaner/

  AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

  _____________________________________

  And just to be sure, nothing is lurking in the background:

  'TDSSKiller Rootkit Removal Utility download for free'

  http://USA.Kaspersky.com/downloads/TDSSKiller

  @@@@@@@@@@@@@@@@@@@@

  Make sure you have the latest updated drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  What are the other steps, which does not include some of the above:

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It would be a good idea also run the System File Checker tool to check that everything is correct in the system files.

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  See you soon.