Time Machine-not enough space error

Similar Questions

• Backup Restore Time Machine: not enough space

  Hi all, I am a neophyte tech so forgive me if I'm not clear. I will try to explain the problem as best I can:

  I have an old MacBook 2009 running Mountain Lion. A few months ago, my brother gave me his old Pro and so my MacBook 2009 fell by the wayside. I used an external hard drive with that old computer as my backup time machine, but as I tried to transfer a lot of documents and photos and update of dropbox and download photos of google and to understand each of these things as I went along, I totally messed up the MacBook. Just... things are weird... nothing was, where it used to be and my photos were gone and Yes, much of this is probably down to me trying to understand a bunch of new programs at once, BUT what I want to do is to restore it to the way it was using a time machine backup.

  So, I googled around and I know when I start it up until I'm supposed to press Ctrl + R and choose the backup that I want, but when it gets to the part where I select a destination and click the only option (the Mac HD), an error message appears with a yellow flag saying "this disc is not enough space to restore your system.

  Now, I don't really know what that means, but what I want to do is to get rid of the current way, this computer is completely and attach it to the way it was when I did the last Time Machine backup.

  Someone help me please... this stuff is so frustrating when I can't figure it out for me and I am sure that there is an easy solution. I read a lot about partitions etc. but I don't know what all of this means that even.

  Thank you in advance!

  Alexandria

  Boot into Recovery now command + R to start. Choose disk utility and erase the boot volume, it should be named Macintosh HD, unless you renamed it. When the erase is quit disk utility and choose to restore from your Time Machine backup. OS X: on OS X Recovery - Apple Support

• cannot make back-up = not enough space. error code 0 x 80070070.

  cannot make back-up = not enough space.  error code 0 x 80070070. does take 60G, but I have 400G external HD. !  What should do?

  The error pops up because there is not enough space in the system reserved partition...

  Download and run the Aomei Partition Manager...

  http://www.disk-partition.com/partition-software.html

  Then, run it.

  The goal is to take a small amount of C to the FRONT of the C partition and add it to the system reserved partition.

  So, select C and the RESIZING option.

  Remove about 200 MB and apply the change. No matter if it's a little more than 200 mb.

  It will take some time to apply because everything has to be mixed on C.

  When you're finished, return to the Partition Manager and select the system reserved partition and the ability to RESIZE.

  Add the free space on the partition system and apply the change BUT does NOT give a letter of the system reserved partition.

  Once rebooted, you should be able to continue your work and get some people make mistakes...

• mmap:not enough space error

  I use mmap for the cache and I often get the following errors:

  BDB0126 mmap: not enough space

  
  

  BDB0061 PANIC: not enough disk space

  
  

  Unable to join the BDB1546 environmennt

  The cache size is 100 MB in 4 segments. How an I solve this problem.

  It requires no contiguous memory.   I suggested to reduce the number of segments not increase them.

  Thank you

  Mike

• Unable to create restore point not enough space error code 0 x 80070070

  My D recovery drive is almost full. I have over 900 GB on my c drive and I have 600 GB free on an external drive. always says not enough space. What is the remedy. Thanks Frank

  Looks like it has to do with one of the partitions on your hard drive.

  Go to start > Control Panel > system and security > administrative tools > computer management > disk management. From there you should be able to see what drives you have connected and all partitions (reserved for the IE system, recovery, etc.)

  Can you tell me what operating system the computer brand you use and on your drive C: drive, which partitions there (and how many MB each partition has?

• Cannot install XP service packs - not enough space error

  Hi, Gilchrist, I lost my XP Pro according to the headder. When I try and reinstall it from the original disk, XP pro installed. The problem is when I try and install SP2 or SP3 States screen that there is not enough hard disk space. He reads that 2012 mb instead of the 6.45 GB. All ideas now to overcome this obstacle.

  Best regards.

  * Title *.
  Problems reinstalling with XP pro after April 21 of McAfee update debachle. Inability to read 6.4 GB hard drive.

  Have you contacted McAfee Support help yet?

  The foregoing despite...

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that another repair facility (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the appropriate removal tool before installing updates, Service Packs Windows or IE upgrades and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Or start a new thread in this forum for further assistance: http://social.answers.microsoft.com/Forums/en-US/xprepair/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• "Not enough space" error windows install during the installation of Windows vista SP2 software

  Original title - cannot install Windows Installer 3.1 on Windows Vista Home Edition

  I use windows vista home with service pack 2 installed. I have a custom made software. Before installing this software, I need to install 4 i.e. cystal reports, dotnet, report viewer and Windows Installer 3. I was able to install the first 3, but the windows installer fails, it is said to be "saturated". I also tried MSI 4.5 but of no use. My software runs well on Windows XP. The interesting thing is that I return this software a year and I installed it on vista and it worked fine. Now I have re-installed windows vista on my computer and had updated. Now this problem. Could there be a reason why some update to windows vista, I installed now wasn't there last year that causes the problem. Can anyone help.

  Hi tbilal22

  
  Windows Installer 4.5 comes pre-installed with Windows Vista and Windows Vista SP1. Please refer to the article for more information-

  http://support.Microsoft.com/kb/942288

   

  It is possible that the old software, it is not compatible to be used with Windows Vista SP2. I suggest you try software installation by using the Windows Vista or XP on Windows Vists SP2 compatibility mode and check if you are able to solve the problem.

  Compatibility mode is used if a program written for an earlier version of Windows does not work properly. Then, you can use the program compatibility Wizard to change the compatibility of the program settings. To manually change the settings of a program, use the individual program's compatibility tab

  You can check the link for assistance on compatibility mode - mentioned below

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

   

  I hope this helps.

• Time Machine backup fails because "there is not enough space on the «DiskStation «»

  My backups regular TimeMachine to DiskStation stopped working a few months ago.  I thought it was because I ran out of space but now I installed an extra 1 TB RAID and I always get this error message.

  Here is the chronology of events that led to the error message.

  16/01/10 23:09 - Backup started manually (1.47 TB TB 2.45 available):

  

  16/01/10 23:11 - preparation of backup... (1.47 TB TB 2.45 available)

  16/01/10 23:15 - "backup: zero KB of 63.8 MB, calculating time remaining..." »

  16/01/10 23:22-2.1 MB saved 63.8 and the first estimate of the remaining time: 'about 4 hrs.

  

  16/01/10 23:50 - now 2.3 63.8 MB MB, 16 hours left (I'm ready for bed).

  16/01/10 23:55-5 minutes later and it backed up 419 MB!

  16/01/11 00:55 - an hour later and it is up to 6.72 GB but the gas target increased to 7.39 GB (I went to bed)

  16/01/11 06:50 - next day morning and it's up to 23,76 GB and the goal is now to 26.13 GB

  

  16/01/11 18:49 - I go home at night and it failed.

  

  

  

  Here is the view viewfinder of the TimeMachine file that I am trying to backup (note, a lot of disk space):

  

  This is the view of the Inspector of it:

  

  System details:

  -MacBook Pro 2013 with OS X 10.11.2

  -LAN WiFi Pace 2Wire998 router with DiskStation connected by Ethernet, MacBook Pro by WiFi

  -Synology DiskStation DS411slim with 4 x 2.5 "hard drives installed.

  A device third-party network attached storage (NAS) or a router is unsuitable for use with Time Machine, especially if it's your only backup. I know that's not what you want to hear. I know that Time Machine accepts the device as a backup destination. I know that the manufacturer says the device will work with Time Machine, and I also know that it usually seems to work. Except when you are trying to restore and find that you can't.

  Apple has published a specification for network devices that works with Time Machine. No third party provider, AFAIK, does meet this specification. They all use the application of Netatalk incomplete, obsolete Apple Filing Protocol.

  Apple does not endorse any device third-party network for use with Time Machine. See this support article.

  Network backup, use as destination an Apple Time Capsule or an external storage device connected to another Mac or a 802.11ac AirPort base station. Only 802.11ac base stations support time Machine, not older model.

  Otherwise, use Time Machine at all. There are other ways to save, although none of them are nowhere near as effective or as well integrated with OS X. I don't have a specific recommendation.

  If you are determined to continue to use the device with Time Machine, your only remedy for any resulting problem is the manufacturer (who will blame Apple, neither you nor anyone else but herself.)

• Cannot convert Server 2008 R2 Machine get error: Instant The VSS cannot be stored, because there is not enough space on the source volumes or because the source computer does not all NTFS volumes. Error code: 2147754783 (0x8004231F).

  I have a couple of server 08 R2 machines where the P to V conversion fails.  I did some research and the problem seems to be related to the system reserved Partition that has 0% available 100 MB free space.  Conversion fails with the error below.

  VSS snapshots cannot be stored because there is not enough space on the source volumes or because the source computer has not all NTFS volumes. Error code:
  2147754783 (0x8004231F).

  
  

  Someone had this problem and came to the top with a solution or to get around?
  

  
  

  Thanks in advance
  

  Guessed it.  My snapshots Appassure did not also exist with a similar error, so that's what I did to solve it.  My servers now converted without any problem.

  1. Open disk management.
  2. Look at the partition of the PRS and see if it is 100% full.
     • If Yes, proceed to step 3.
     • If this is not the case, check if there are readers who have no more of 300 MB free (minimum requirement to use VSS).
  3. Click a drive, select properties and then select the instant snapshots tab.
  4. Ensure that all shadow copies are disabled and no limit on all players.
  5. Go to the partition of the SRP and assign the B:drive letter.
  6. Open the B: drive via disk management, and then locate the folder System Volume Information. Note: if necessary, change the folder options so that you can view hidden files, folders and drives.
  7. Right-click the System Volume Information folder, and then select Properties.
  8. On the Security tab, click Edit, and then add the group with full control everyone in the folder.
  9. Open the System Volume Information folder (you should see log files are full), open a running as an administrator command prompt and then type the following commands to unload the filter driver.
     • B:
     • B:\>FLTMC UNLOAD AAFSFLT
  10. Navigate to the System Volume Information folder, and then type the following commands:
      • B:\>CD System Volume Information
      • B:\System Volume Information > AALOG_ DEL * (this will remove all of the log files, and then re-create a new)
      • B:\System Volume Information > CD\
      • B:\>FLTMC LOAD AAFSFLT
  11. Close the command prompt window.
  12. In Windows, right click on the reserve system folder and remove the Group everyone.
  13. In Disk Manager, remove the B: drive (and click Yes when prompted with a warning window).

• Why I see Runtime Error R6016-not enough space for thread data?

  All of a sudden when I try to launch Google Chrome, I get "error R6016-not enough space for thread data? ' like Chrome stops. Plenty of hard disk, disk defragmented, no viruses or malware. Never seen this message before.

  I think you're on the right track to reinstall Chrome... but they have a method of choice for the best results and that the information is here:

  http://support.Google.com/chrome/bin/answer.py?hl=en&answer=111899

  Just FYI, running sfc/scannow won't help, but it will waste your time and you will not be able to determine which file is causing the problem because...

  When sfc/scannow runs successfully, you will see a start and complete message in the Event Viewer log system.

  It can take a long time to run and slow down your system.  When it starts and stops correctly you can only see events like this in the case where the system log viewer:

  Event type: Information
  Event source: Windows File Protection
  Event category: no
  Event ID: 64016
  Analysis of file File Protection Windows has been started.

  Event type: Information
  Event source: Windows File Protection
  Event category: no
  Event ID: 64017
  Windows File Protection file analysis completed successfully.

  There is no information about what he did or what he did not.

  Even if sfc/scannow finds something to do, you will not know about it.

  That's why try again more than a waste of time.

• Not enough space on the store of data error

  I just created a new virtual machine and the data store has 1 GB free, but when I try to turn on the virtual machine, I get the error ' not enough space on the data error store '.

  What is the minimum data required to power the virtual computer space? I thought that 1 GB is a lot of space...

  That is also correct long as you do not have a defined reserve, because don't forget the size of the by vm vmkernel swap file is equal to the memory assigned to the virtual machine minus the reserve memory.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Not enough space on temporary disk error

  Run database query error. [Macromedia] [SequeLink JDBC Driver] [ODBC
  Socket] [Microsoft] [ODBC Microsoft Access driver] not enough temporary space
  disc. I am running CF MX 7 on Win2k3.
  
  So far, the only solution is to restart all processes of CF and rinse implementing caching in the CFMX 7 server settings. Anyone have an idea what is wrong?
  
  Here is the error on all of my Web pages that run a database query.
  
  [Macromedia] [SequeLink JDBC Driver] [ODBC Socket] [Microsoft] [ODBC Microsoft Access driver] Not enough space on temporary disk.
  

  Hello

  I agree with this http://support.microsoft.com/kb/165041/en-us here. I've done this before and modify my registry settings. I did it the year last on the same server that is gave me this question today. But this time I emptied the Cache of CFMX 7 which he sorted. Is there a logical explanation why it worked as opposed to the registry update?

  I may sound pedantic on this subject but in search of answers. :)

• Get the error code 0 x 80070070, "a snapshot cannot be created for the following reason. There is not enough space on the disk

  Original title: I get a "not enough space on the disk for the snapshot" msg... whart is a "cliché" how much space do I need? 1. on the drive, I'm backup? 2. the disk I'm backup to?
  I can't do a backup. the msg I get is:
  "Cannot create a shadow copy for the following reason."
  "There is not enough space on the disk (08 x 80070070).
  that is exactly a "cliché"?
  How much space do I need?
  1. on the drive, I'm backup?
  (I have 3,41 GB free on 224gigs)
  2. the disk I'm backup to?
  (I have 636 concerts!)
  Thanks for any clarification you can give,
  justFranc

  Hello

   
  
  1. what operating system is installed on the computer?
  2. you have any third-party backup software installed on the computer?
  
  Start the shadow copy volume service and see if the problem persists.
  a: click Start > run
  b: type Services.msc in the start search box and click on enter.
  c: Are now looking for a shadow copy volumeservice, double-click it to open it.
  d: make sure that the Service is started and set to Automatic.
  
  Shadow copy is a technology included in Microsoft Windows that allows taking manual or automatic backup copies or snapshots of data, even if it has a lock on a volume that is specific to a precise moment in time on regular intervals.
  There should be more space on the backup destination media to take successfully no matter what data should be backed up from the source backup media.
  
  Hope this information helps.

• I get an error message not enough space, I can install adobe on drive (D) instead of (C)

  The computer I have has a concert of 1oo "C" drive, it is full, I get an error message when I try to download and install, that there is not enough space on C.  That I can install it on D?

  It depends on what 'it' is.  If 'it' is a CC product...

  Change for Applications installation location

  With the application of CC open, select the gear icon in the upper right, and then choose Preferences.  In the preferences of the screen select creative cloud and then look for the drop-down list installation location

• B2496824 Player 7.1 + Win 10 (split volume) error: not enough space on the disk

  Hello!

  I have the following configuration:

  Host: Windows 7 x 64 professional

  Host: Samsung 840 EVO 240 GB SSD with 48 GB of free

  Comments: Overview of Windows 10

  Comments: 60 GB VMDK, spread across 30 x 2 GB vmdk, which are NOT previously affected

  Description of the problem:

  I do upgrade from Windows in the Win10 system, and then at one point I had a warning of VMware Player, which is not accessible VMDK #009

  It's the NEWSPAPER, which States that vmdk #009 running out of space... which is very strange, considdering that I have 40 GB free in the guest OS and 48 GB free in the HOME... and the VMDK is an expansion of volume

  2015 04-15 T 10: 47:20.827 + 02:00 | VMX | I120: MsgQuestion: msg.vmxaiomgr.retrycontabort.rudeunplug response = 2

  2015 04-15 T 10: 47:20.827 + 02:00 | VMX | I120: DISKLIB-LIB: RWv failed ioId: #46815 (13) (13).

  2015 04-15 T 10: 47:20.827 + 02:00 | VMX | I120: DISK: drive e/s on scsi0:0 failed: there is not enough space on the file system for the selected operation (13)

  2015 04-15 T 10: 47:20.827 + 02:00 | VMX | I120: # dumping contents of iov #.

  2015 04-15 T 10: 47:20.827 + 02:00 | VMX | I120: WRITE

  2015 04-15 T 10: 47:20.827 + 02:00 | VMX | I120: startSector = 37601304

  2015 04-15 T 10: 47:20.827 + 02:00 | VMX | I120: numSectors = 8

  2015 04-15 T 10: 47:20.827 + 02:00 | VMX | I120: numBytes = 4096

  2015 04-15 T 10: 47:20.827 + 02:00 | VMX | I120: numEntries = 1

  2015 04-15 T 10: 47:20.827 + 02:00 | VMX | I120: entries [0] = F53A8000 / 4096

  2015 04-15 T 10: 47:20.841 + 02:00 | VMX | I120: VMXAIOMGR: retry on write ' C:\Users\mkirk\Documents\Virtual Machines\Windows 10\Windows 10 - s009.vmdk ': there is not enough space on the disk.

  2015 04-15 T 10: 47:20.841 + 02:00 | VMX | I120: VMXAIOMGR: System: err = 700002 errCode = 112 freeSpace = 51699863552

  2015 04-15 T 10: 47:20.841 + 02:00 | VMX | I120: VMXAIOMGR: ' C:\Users\mkirk\Documents\Virtual Machines\Windows 10\Windows 10 - s009.vmdk ': writing s = 825058708480 n = 4096 = 1 IAF = 0

  2015 04-15 T 10: 47:20.841 + 02:00 | VMX | I120: VMXAIOMGR: v [0] = F53A9000:4096

  2015 04-15 T 10: 47:20.844 + 02:00 | VMX | I120: VMXAIOMGR: retry on write ' C:\Users\mkirk\Documents\Virtual Machines\Windows 10\Windows 10 - s009.vmdk ': there is not enough space on the disk.

  2015 04-15 T 10: 47:20.844 + 02:00 | VMX | I120: VMXAIOMGR: System: err = 700002 errCode = 112 freeSpace = 51699863552

  2015 04-15 T 10: 47:20.844 + 02:00 | VMX | I120: VMXAIOMGR: ' C:\Users\mkirk\Documents\Virtual Machines\Windows 10\Windows 10 - s009.vmdk ': writing s = 825058708480 n = 4096 = 1 IAF = 0

  2015 04-15 T 10: 47:20.845 + 02:00 | VMX | I120: VMXAIOMGR: v [0] = F53A9000:4096

  2015 04-15 T 10: 47:20.846 + 02:00 | VMX | I120: VMXAIOMGR: retry on write ' C:\Users\mkirk\Documents\Virtual Machines\Windows 10\Windows 10 - s009.vmdk ': there is not enough space on the disk.

  2015 04-15 T 10: 47:20.846 + 02:00 | VMX | I120: VMXAIOMGR: System: err = 700002 errCode = 112 freeSpace = 51699863552

  2015 04-15 T 10: 47:20.846 + 02:00 | VMX | I120: VMXAIOMGR: ' C:\Users\mkirk\Documents\Virtual Machines\Windows 10\Windows 10 - s009.vmdk ': writing s = 825058708480 n = 4096 = 1 IAF = 0

  2015 04-15 T 10: 47:20.846 + 02:00 | VMX | I120: VMXAIOMGR: v [0] = F53A9000:4096

  2015 04-15 T 10: 47:20.848 + 02:00 | VMX | I120: VMXAIOMGR: retry on write ' C:\Users\mkirk\Documents\Virtual Machines\Windows 10\Windows 10 - s009.vmdk ': there is not enough space on the disk.

  2015 04-15 T 10: 47:20.848 + 02:00 | VMX | I120: VMXAIOMGR: System: err = 700002 errCode = 112 freeSpace = 51699863552

  2015 04-15 T 10: 47:20.848 + 02:00 | VMX | I120: VMXAIOMGR: ' C:\Users\mkirk\Documents\Virtual Machines\Windows 10\Windows 10 - s009.vmdk ': writing s = 825058708480 n = 4096 = 1 IAF = 0

  2015 04-15 T 10: 47:20.848 + 02:00 | VMX | I120: VMXAIOMGR: v [0] = F53A9000:4096

  2015 04-15 T 10: 47:20.850 + 02:00 | VMX | I120: VMXAIOMGR: retry on write ' C:\Users\mkirk\Documents\Virtual Machines\Windows 10\Windows 10 - s009.vmdk ': there is not enough space on the disk.

  2015 04-15 T 10: 47:20.850 + 02:00 | VMX | I120: VMXAIOMGR: System: err = 700002 errCode = 112 freeSpace = 51699863552

  2015 04-15 T 10: 47:20.850 + 02:00 | VMX | I120: VMXAIOMGR: ' C:\Users\mkirk\Documents\Virtual Machines\Windows 10\Windows 10 - s009.vmdk ': writing s = 825058708480 n = 4096 = 1 IAF = 0

  2015 04-15 T 10: 47:20.850 + 02:00 | VMX | I120: VMXAIOMGR: v [0] = F53A9000:4096

  2015 04-15 T 10: 47:20.851 + 02:00 | VMX | I120: VMXAIOMGR: retry on write ' C:\Users\mkirk\Documents\Virtual Machines\Windows 10\Windows 10 - s009.vmdk ': there is not enough space on the disk.

  2015 04-15 T 10: 47:20.851 + 02:00 | VMX | I120: VMXAIOMGR: System: err = 700002 errCode = 112 freeSpace = 51699863552

  2015 04-15 T 10: 47:20.851 + 02:00 | VMX | I120: VMXAIOMGR: ' C:\Users\mkirk\Documents\Virtual Machines\Windows 10\Windows 10 - s009.vmdk ': writing s = 825058708480 n = 4096 = 1 IAF = 0

  2015 04-15 T 10: 47:20.851 + 02:00 | VMX | I120: VMXAIOMGR: v [0] = F53A9000:4096

  After copying VMDK #009 in a new file

  and after running the tool of restoration Performance of Samsung,

  Windows 10 VM is now back in business!