mmap:not enough space error

Similar Questions

• cannot make back-up = not enough space. error code 0 x 80070070.

  cannot make back-up = not enough space.  error code 0 x 80070070. does take 60G, but I have 400G external HD. !  What should do?

  The error pops up because there is not enough space in the system reserved partition...

  Download and run the Aomei Partition Manager...

  http://www.disk-partition.com/partition-software.html

  Then, run it.

  The goal is to take a small amount of C to the FRONT of the C partition and add it to the system reserved partition.

  So, select C and the RESIZING option.

  Remove about 200 MB and apply the change. No matter if it's a little more than 200 mb.

  It will take some time to apply because everything has to be mixed on C.

  When you're finished, return to the Partition Manager and select the system reserved partition and the ability to RESIZE.

  Add the free space on the partition system and apply the change BUT does NOT give a letter of the system reserved partition.

  Once rebooted, you should be able to continue your work and get some people make mistakes...

• Time Machine-not enough space error

  Hi all

  I had to unplug my computer and move it to another room and now after all hang up, I get this message "not enough space for full backup". There are about 150 GB to 2 TB disk space as it is filled with iTunes and Time machine backups.

  I guess it's because ever since I hooked everything back up Time Machine think it is made the first backup of everything rather than pick up where he left off when he made the last backup?

  Please tell me that I shouldn't let it save it for the first time again. It took an eternity to accomplish this last time as the computer kept going to sleep.

  Thanks for any help,

  Al

  Start with 18 in the 1st article linked.

  Troubleshooting of Time Machine

  Solving the problems of Time Machine

• Unable to create restore point not enough space error code 0 x 80070070

  My D recovery drive is almost full. I have over 900 GB on my c drive and I have 600 GB free on an external drive. always says not enough space. What is the remedy. Thanks Frank

  Looks like it has to do with one of the partitions on your hard drive.

  Go to start > Control Panel > system and security > administrative tools > computer management > disk management. From there you should be able to see what drives you have connected and all partitions (reserved for the IE system, recovery, etc.)

  Can you tell me what operating system the computer brand you use and on your drive C: drive, which partitions there (and how many MB each partition has?

• Cannot install XP service packs - not enough space error

  Hi, Gilchrist, I lost my XP Pro according to the headder. When I try and reinstall it from the original disk, XP pro installed. The problem is when I try and install SP2 or SP3 States screen that there is not enough hard disk space. He reads that 2012 mb instead of the 6.45 GB. All ideas now to overcome this obstacle.

  Best regards.

  * Title *.
  Problems reinstalling with XP pro after April 21 of McAfee update debachle. Inability to read 6.4 GB hard drive.

  Have you contacted McAfee Support help yet?

  The foregoing despite...

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that another repair facility (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the appropriate removal tool before installing updates, Service Packs Windows or IE upgrades and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Or start a new thread in this forum for further assistance: http://social.answers.microsoft.com/Forums/en-US/xprepair/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• "Not enough space" error windows install during the installation of Windows vista SP2 software

  Original title - cannot install Windows Installer 3.1 on Windows Vista Home Edition

  I use windows vista home with service pack 2 installed. I have a custom made software. Before installing this software, I need to install 4 i.e. cystal reports, dotnet, report viewer and Windows Installer 3. I was able to install the first 3, but the windows installer fails, it is said to be "saturated". I also tried MSI 4.5 but of no use. My software runs well on Windows XP. The interesting thing is that I return this software a year and I installed it on vista and it worked fine. Now I have re-installed windows vista on my computer and had updated. Now this problem. Could there be a reason why some update to windows vista, I installed now wasn't there last year that causes the problem. Can anyone help.

  Hi tbilal22

  
  Windows Installer 4.5 comes pre-installed with Windows Vista and Windows Vista SP1. Please refer to the article for more information-

  http://support.Microsoft.com/kb/942288

   

  It is possible that the old software, it is not compatible to be used with Windows Vista SP2. I suggest you try software installation by using the Windows Vista or XP on Windows Vists SP2 compatibility mode and check if you are able to solve the problem.

  Compatibility mode is used if a program written for an earlier version of Windows does not work properly. Then, you can use the program compatibility Wizard to change the compatibility of the program settings. To manually change the settings of a program, use the individual program's compatibility tab

  You can check the link for assistance on compatibility mode - mentioned below

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

   

  I hope this helps.

• Why I see Runtime Error R6016-not enough space for thread data?

  All of a sudden when I try to launch Google Chrome, I get "error R6016-not enough space for thread data? ' like Chrome stops. Plenty of hard disk, disk defragmented, no viruses or malware. Never seen this message before.

  I think you're on the right track to reinstall Chrome... but they have a method of choice for the best results and that the information is here:

  http://support.Google.com/chrome/bin/answer.py?hl=en&answer=111899

  Just FYI, running sfc/scannow won't help, but it will waste your time and you will not be able to determine which file is causing the problem because...

  When sfc/scannow runs successfully, you will see a start and complete message in the Event Viewer log system.

  It can take a long time to run and slow down your system.  When it starts and stops correctly you can only see events like this in the case where the system log viewer:

  Event type: Information
  Event source: Windows File Protection
  Event category: no
  Event ID: 64016
  Analysis of file File Protection Windows has been started.

  Event type: Information
  Event source: Windows File Protection
  Event category: no
  Event ID: 64017
  Windows File Protection file analysis completed successfully.

  There is no information about what he did or what he did not.

  Even if sfc/scannow finds something to do, you will not know about it.

  That's why try again more than a waste of time.

• I get an error message not enough space, I can install adobe on drive (D) instead of (C)

  The computer I have has a concert of 1oo "C" drive, it is full, I get an error message when I try to download and install, that there is not enough space on C.  That I can install it on D?

  It depends on what 'it' is.  If 'it' is a CC product...

  Change for Applications installation location

  With the application of CC open, select the gear icon in the upper right, and then choose Preferences.  In the preferences of the screen select creative cloud and then look for the drop-down list installation location

• Cannot convert Server 2008 R2 Machine get error: Instant The VSS cannot be stored, because there is not enough space on the source volumes or because the source computer does not all NTFS volumes. Error code: 2147754783 (0x8004231F).

  I have a couple of server 08 R2 machines where the P to V conversion fails.  I did some research and the problem seems to be related to the system reserved Partition that has 0% available 100 MB free space.  Conversion fails with the error below.

  VSS snapshots cannot be stored because there is not enough space on the source volumes or because the source computer has not all NTFS volumes. Error code:
  2147754783 (0x8004231F).

  
  

  Someone had this problem and came to the top with a solution or to get around?
  

  
  

  Thanks in advance
  

  Guessed it.  My snapshots Appassure did not also exist with a similar error, so that's what I did to solve it.  My servers now converted without any problem.

  1. Open disk management.
  2. Look at the partition of the PRS and see if it is 100% full.
     • If Yes, proceed to step 3.
     • If this is not the case, check if there are readers who have no more of 300 MB free (minimum requirement to use VSS).
  3. Click a drive, select properties and then select the instant snapshots tab.
  4. Ensure that all shadow copies are disabled and no limit on all players.
  5. Go to the partition of the SRP and assign the B:drive letter.
  6. Open the B: drive via disk management, and then locate the folder System Volume Information. Note: if necessary, change the folder options so that you can view hidden files, folders and drives.
  7. Right-click the System Volume Information folder, and then select Properties.
  8. On the Security tab, click Edit, and then add the group with full control everyone in the folder.
  9. Open the System Volume Information folder (you should see log files are full), open a running as an administrator command prompt and then type the following commands to unload the filter driver.
     • B:
     • B:\>FLTMC UNLOAD AAFSFLT
  10. Navigate to the System Volume Information folder, and then type the following commands:
      • B:\>CD System Volume Information
      • B:\System Volume Information > AALOG_ DEL * (this will remove all of the log files, and then re-create a new)
      • B:\System Volume Information > CD\
      • B:\>FLTMC LOAD AAFSFLT
  11. Close the command prompt window.
  12. In Windows, right click on the reserve system folder and remove the Group everyone.
  13. In Disk Manager, remove the B: drive (and click Yes when prompted with a warning window).

• IOException: error = 12, not enough space when the duplication of external process

  Hi all
  
  I've encountered the question as:
  
  java.io.IOException: cannot run program "/ usr/local/bin/sudo ': error = 12, not enough space
  at java.lang.ProcessBuilder.start(ProcessBuilder.java:460)
  at java.lang.Runtime.exec(Runtime.java:593)
  at java.lang.Runtime.exec(Runtime.java:466)
  ...
  Caused by: java.io.IOException: error = 12, not enough space
  at java.lang.UNIXProcess.forkAndExec (Native Method)
  to java.lang.UNIXProcess. < init > (UNIXProcess.java:53)
  at java.lang.ProcessImpl.start(ProcessImpl.java:65)
  at java.lang.ProcessBuilder.start(ProcessBuilder.java:453)
  
  When I tried to call an external script by Runtime.exec. I checked the physical memory and swap, two of them were more than 2 GB at the point where the exception was thrown. The same exception was thrown by the other processes external duplication of wire...
  
  Everyone please throw me some lights on this issue? I have seen no exception OutOfMemoryError either from my application.
  
  Thank you and best regards.

  You're out of swap space. Nothing to do with local memory, heap, OutOfMemoryErrors, etc.

• Not enough space within the CC Installer error.

  Hello

  (1) purchased annual presentation of creative cloud

  (2) downloaded, installed the creative cloud

  (3) failed to install Acrobat Pro XI, it shows that there is not enough space

  (4) installation directory modified in the settings

  (5) I tried "repeat."

  (6) shows the same error

  (7) exit the program Creative Cloud

  8) launched again with admin rights, tempted to "repeat" installation

  (9) problem remains.

  Live Adobe support is not an answer.

  Phone support is 39 USD / incident (nice!).

  Thanks in advance for your help.

  Alex.

  Receipt of answer, but what they could help to was:

  (1) it is recommended to install all the Adobe products on the C drive (where the operating system is installed)

  According to your questions:

  (1) on my RAM disk only 270 MB of free space (I have 6 drives well and lots of space on others)

  (2) change the installation with the settings menu directory did not help a

  Solution:

  As I used the symbolic links to install Adobe Reader on RAM disk (if not impossible) to push (900% +) my daily productivity, I have to

  (A) uninstall all adobe products

  (B) remove all symbolic links to these

  (C) Manage fresh install again.

  Thanks for trying to help.

  Alex.

• vSphere Host Update Utility - ERROR: not enough space on the boot partition

  I get the following error when I run the host update utility

  ERROR: Not enough space on the boot partition

  The boot partition doesn't have enough space to store initrd.img.

  Expected free space (MB): 50, found: 44

  I can free until you reach the required amount?

  Send the output of this command:

  DF h

  And the version of ESX 3.x

  See also this KB (there are a few tips on where space can be lost):

  http://KB.VMware.com/kb/1016511

  André

• Not enough space on the store of data error

  I just created a new virtual machine and the data store has 1 GB free, but when I try to turn on the virtual machine, I get the error ' not enough space on the data error store '.

  What is the minimum data required to power the virtual computer space? I thought that 1 GB is a lot of space...

  That is also correct long as you do not have a defined reserve, because don't forget the size of the by vm vmkernel swap file is equal to the memory assigned to the virtual machine minus the reserve memory.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• ORA-273xx OS OS system error message: not enough space in CAR 11.0.1.7

  Hello world
  
  We have Oracle RAC on HP - UX 11.32 with two knots after a while that one of the nodes had shot and you cannot issue an order until the server is restarted.
  
  
  Here is a log of messages in the queue alerts.
  
  ERRORS
  =======
  Process m00D died, see the trace file
  Boot process failed, error of the battery:
  Errors in the /u01/app/oracle/diag/rdbms/ecmprd/ECMPRD2/trace/ECMPRD2_psp0_9389.trc file:
  ORA-27300: OS dependent operating system: fork failed with status: 12
  ORA-27301: OS Error Message: not enough space
  ORA-27302: an error occurred at: skgpspawn3
  M007 died the process, see the trace file
  
  
  
  Trace file
  ============
  2011-01-18 15:03:19.980
  Boot process failed, error of the battery:
  ORA-27300: OS dependent operating system: fork failed with status: 12
  ORA-27301: OS Error Message: not enough space
  ORA-27302: an error occurred at: skgpspawn3
  
  2011-01-18 15:13:20.135
  Boot process failed, error of the battery:
  ORA-27300: OS dependent operating system: fork failed with status: 11
  ORA-27301: OS Error Message: Resource temporarily unavailable
  ORA-27302: an error occurred at: skgpspawn5
  
  
  
  I think it's the limitation or problem of operating system kernel. no luck that we stuck with bad engineer as we took a week, but no action until now I try now he climbs, we open bu SR.
  
  Anyway any idea that will really help
  
  DB v 11.1.0.7
  
  
  Thank you

  Hello

  See the TechNote MOS:

  * Troubleshooting error ORA-27300 ORA-27301 ORA-27302 [579365.1 ID] *.

  Thank you
  A H E E R X

• Not enough space on temporary disk error

  Run database query error. [Macromedia] [SequeLink JDBC Driver] [ODBC
  Socket] [Microsoft] [ODBC Microsoft Access driver] not enough temporary space
  disc. I am running CF MX 7 on Win2k3.
  
  So far, the only solution is to restart all processes of CF and rinse implementing caching in the CFMX 7 server settings. Anyone have an idea what is wrong?
  
  Here is the error on all of my Web pages that run a database query.
  
  [Macromedia] [SequeLink JDBC Driver] [ODBC Socket] [Microsoft] [ODBC Microsoft Access driver] Not enough space on temporary disk.
  

  Hello

  I agree with this http://support.microsoft.com/kb/165041/en-us here. I've done this before and modify my registry settings. I did it the year last on the same server that is gave me this question today. But this time I emptied the Cache of CFMX 7 which he sorted. Is there a logical explanation why it worked as opposed to the registry update?

  I may sound pedantic on this subject but in search of answers. :)