Cannot install XP service packs - not enough space error

Similar Questions

• Cannot install Vista service pack 2 is 800f0a09 error code with the message that there are problems with the driver for dell latitude

  Original title: why I get error code 800f0a09 to upgrade to windows vista service pack 2

  I have a laptop del that is running on Windows Vista Edition Home Premium. I tried to download itunes but it requires service pack 2. Whenever I try to update to service pack 2, I get the message following error code 800F0A09. He also mentioned problems with the driver for dell latitude. What can I do to fix this please.

  Thank you

  Hello

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  You can not install Vista Service pack 2 and get the error with code 800f0a09 and the message that there are problems with the driver for dell latitude.

  The problem may occur if some of the components of the update are corrupt.

  What is the full error message that you receive?

  I suggest you follow the steps mentioned below to check if the problem is with the update components:

  Method 1: Reset the update components

  See the site:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: Run the system update readiness tool

   

  See the site:

  System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  Method 3: Turn off the antivirus software

   

  See the site:

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-in/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• oracle.as.install.engine.exception.LogInitializeException: not enough space to create the log files in the location specified in the inventory. Create a space under the null specified inventory or to point to a different directory

  Hello

  I have installed:

  -(Oracle Linux) OL 6.6

  121 GB HD

  5.0 GB RAM

  -JDK-7u80-EA-bin-b05-Linux-x64-20_jan_2015.tar.gz (Java)

  -Fmw_12.1.3.0.0_infrastructure.jar (infrastructure)

  -Fmw_12.1.3.0.0_ohs_linux64.bin (SST)

  I try to install OBIEE, I unzip these files:

  -bi_linux_x86_111170_64_disk1_1of2.zip

  -bi_linux_x86_111170_64_disk1_2of2.zip

  -bi_linux_x86_111170_64_disk2_1of2.zip

  -bi_linux_x86_111170_64_disk2_2of2.zip

  -bi_linux_x86_111170_64_disk3.zip

  I run/home/oracle/OBIEE/Disk1/runInslaller and open the screen to select the oraInventory directory, when I click OK, the error message appears (see image below):

  

  [oracle@localhost Disk1] $. / runInstaller

  Iniciando Universal Oracle install...

  Espaço Verificando Temp: deve ser superior a 1536 MB.   Passado Reais 36602 MB

  Verificando swap Espaço: deve ser superior a 500 MB.   Passado Reais 2553 MB

  Verificando monitor: deve ser configurado para exibir pelo menos 256 cores.    Reais 16777216 Passado

  2nd para iniciar o Oracle Universal Installer from/tmp/OraInstall2015-09-13_08-13-50 h Aguarde... [oracle@localhost Disk1] $ 13/09 / 2015 20:13:53 oracle.as.install.bi.util.ConsumerUIProperties getCustomPropertiesFilename

  INFO: Using a custom UI properties of the oracle/as/install/bi/config/consumer-ui.properties file

  [ERROR]: error initializing log values

  oracle.as.install.engine.exception.LogInitializeException: Espaço insuficiente para criar os log archives na Localização address para o inventario. Espaço shouts ob o inventario especificado/home/oracle/oraInventory UO aponte para outro inventario

  to oracle.as.install.engine.logging.EngineLogHelper. < init > (EngineLogHelper.java:65)

  at oracle.as.install.engine.logging.EngineLogHelper.initialize(EngineLogHelper.java:192)

  to oracle.as.install.engine.InstallEngine. < init > (InstallEngine.java:135)

  to oracle.as.install.engine.InstallEngine. < clinit > (InstallEngine.java:130)

  at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:603)

  In English:

  oracle.as.install.engine.exception.LogInitializeException: not enough space to create the log files in the location specified in the inventory. Create a space under the null specified inventory or to point to a different directory

  What can be?

  Well, you very probably not a lot of space on the left under/Home.

  You can move to another location that is located on/home/oracle/orInventory the / partitioning of the partition where you probably have more space left if you used the default value.

  For example, as a root user:

  mkdir/U01

  MV/home/oracle/oraInventory/U01

  Update /etc/oraInst.loc and replace

  inventory_loc = / home/oracle/oraInventory

  with

  inventory_loc = / u01/oraInventory

• cannot make back-up = not enough space. error code 0 x 80070070.

  cannot make back-up = not enough space.  error code 0 x 80070070. does take 60G, but I have 400G external HD. !  What should do?

  The error pops up because there is not enough space in the system reserved partition...

  Download and run the Aomei Partition Manager...

  http://www.disk-partition.com/partition-software.html

  Then, run it.

  The goal is to take a small amount of C to the FRONT of the C partition and add it to the system reserved partition.

  So, select C and the RESIZING option.

  Remove about 200 MB and apply the change. No matter if it's a little more than 200 mb.

  It will take some time to apply because everything has to be mixed on C.

  When you're finished, return to the Partition Manager and select the system reserved partition and the ability to RESIZE.

  Add the free space on the partition system and apply the change BUT does NOT give a letter of the system reserved partition.

  Once rebooted, you should be able to continue your work and get some people make mistakes...

• Time Machine-not enough space error

  Hi all

  I had to unplug my computer and move it to another room and now after all hang up, I get this message "not enough space for full backup". There are about 150 GB to 2 TB disk space as it is filled with iTunes and Time machine backups.

  I guess it's because ever since I hooked everything back up Time Machine think it is made the first backup of everything rather than pick up where he left off when he made the last backup?

  Please tell me that I shouldn't let it save it for the first time again. It took an eternity to accomplish this last time as the computer kept going to sleep.

  Thanks for any help,

  Al

  Start with 18 in the 1st article linked.

  Troubleshooting of Time Machine

  Solving the problems of Time Machine

• Unable to create restore point not enough space error code 0 x 80070070

  My D recovery drive is almost full. I have over 900 GB on my c drive and I have 600 GB free on an external drive. always says not enough space. What is the remedy. Thanks Frank

  Looks like it has to do with one of the partitions on your hard drive.

  Go to start > Control Panel > system and security > administrative tools > computer management > disk management. From there you should be able to see what drives you have connected and all partitions (reserved for the IE system, recovery, etc.)

  Can you tell me what operating system the computer brand you use and on your drive C: drive, which partitions there (and how many MB each partition has?

• mmap:not enough space error

  I use mmap for the cache and I often get the following errors:

  BDB0126 mmap: not enough space

  
  

  BDB0061 PANIC: not enough disk space

  
  

  Unable to join the BDB1546 environmennt

  The cache size is 100 MB in 4 segments. How an I solve this problem.

  It requires no contiguous memory.   I suggested to reduce the number of segments not increase them.

  Thank you

  Mike

• "Not enough space" error windows install during the installation of Windows vista SP2 software

  Original title - cannot install Windows Installer 3.1 on Windows Vista Home Edition

  I use windows vista home with service pack 2 installed. I have a custom made software. Before installing this software, I need to install 4 i.e. cystal reports, dotnet, report viewer and Windows Installer 3. I was able to install the first 3, but the windows installer fails, it is said to be "saturated". I also tried MSI 4.5 but of no use. My software runs well on Windows XP. The interesting thing is that I return this software a year and I installed it on vista and it worked fine. Now I have re-installed windows vista on my computer and had updated. Now this problem. Could there be a reason why some update to windows vista, I installed now wasn't there last year that causes the problem. Can anyone help.

  Hi tbilal22

  
  Windows Installer 4.5 comes pre-installed with Windows Vista and Windows Vista SP1. Please refer to the article for more information-

  http://support.Microsoft.com/kb/942288

   

  It is possible that the old software, it is not compatible to be used with Windows Vista SP2. I suggest you try software installation by using the Windows Vista or XP on Windows Vists SP2 compatibility mode and check if you are able to solve the problem.

  Compatibility mode is used if a program written for an earlier version of Windows does not work properly. Then, you can use the program compatibility Wizard to change the compatibility of the program settings. To manually change the settings of a program, use the individual program's compatibility tab

  You can check the link for assistance on compatibility mode - mentioned below

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

   

  I hope this helps.

• XP - cannot install a Service Pack

  I can't install service pack 1a or sp2.  I just finished a new reinstall of xp home edition and the two service packs to hang at different locations.

  Chances are (already) (new) infected computer! See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  NOTE: If your computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do the clean install (AKA a "destructive recovery").

  After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  Tip: After completing the computer fully patched, download/install KB971029 manually before connecting any player external to the computer: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx
  http://www.us-cert.gov/CAs/tips/ST05-007.html

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/xprepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot install Vista Service Pack 2 (or closer to Windows 7)

  Intel Core 2 Due CPU 8400 @ 3.00 GHZ w 2 GB RAM running (Windows Home Premium 64-bit).  Service Pack 1 is installed.

  Buy windows 7... tried last month upgrading Vista however the updater doesn't install not service pack 2. (KB948465).  kept trying to install it but would get to the end and fail, and then seeks to restore to the previous version and I would then have to start in safe mode.
  Spent the last day trawl through all instances and followed each piece of advice out there, but still no joy.
  Manually install the update for Windows (KB947821).  Uninstalled all antivirus & anti-spyware (AVG & Norton were both running).  Ran System File Checker & Windows Install CleanUp and say that everything is OK.
  Each reboot the computer in order to start the installation it restarts.  must select Safe mode with network... so going directly in "installation of the Service Pack: stage 3 of 3" arrives at 100% complete but then message comes up saying "Service pack do not have. '"  Restoration of the changes.  Do not turn off your computer. "Then"Configuring updates"and then to the normal login screen.  When I connect and go update history it reads "Windows Vista Service Pace 2 for x 64-based systems (KB948465).»  Details of the error 8007043 C Code.

  I then followed the instructions to install from the original DVD however after several hours I finally managed: 'the upgrade has failed.  your previous version of WIndows is being restored.  Do not restart your computer during this time. »

  Looking around and we found a lot of people with this issue but no solutions.  Don't know what I can do now?
  Any help is greatly appreciated!
  
  Best,

  Tom

  Uninstalled all antivirus & anti-spyware (AVG & Norton were both running).

  I just noticed the above your first post. You had AVG and installed NAV and loading at startup? What were you doing thought? Not surprising that SP2 or Win7 upgrade would not install!

  You must have an installed AV 1 and loading at startup. Chances are that AVG or Norton worked properly.

  You have 2 choices:

  1. back up your personal data (of which none should be considered reliable) and then format the HARD drive and do a clean install of Vista. or...

  2. make a "custom (Advanced) installation" of Win7 and then delete %system%\Windows.old <=this> . Do not even think to transfer the data from Vista to Win7. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot install vista service pack 1

  For almost 2 years, I try to install service pack 1. When installing to part 3 of 3 back changes and is not installed. I called the Vista support almost 10 times, they also helped me online. I've tried everything.
  What can I do?

  @TaurArian: cf. http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/7a629161-8900-4c2f-a42a-dc065748eecc ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot install windows service pack 3 (KB936929). I get an 0x87FF054F error code.

  I tried several times without success.  I even tried tech support, they were not useful.  I tried disabling firewall, updates of Sony Vaio download (I have the OEM version) nothing works.  Any ideas out there?  I have Windows XP 32-bit.

  Hello

  You can check this link:
  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717
   
  See also:
  http://support.Microsoft.com/kb/950718

• Cannot install Vista Service Pack 1, error 8024200d.

  Original title: cannot update

  I get the error message 8024200d message when I try to install Service Pack 1 for Vista.  I did try it again 3 times with no luck.  I have the update in order to install my new Cisco router.  Help, please.  Thank you

  Hello!

  Error 0x8024200D SUS_E_UH_NEEDANOTHERDOWNLOAD code
  The Setup program requires more data to download

  Translation: Everything you are trying to install, your machine needs some
  other updates to be installed first.

  Try to download Windows Vista SP1 form this link:

  http://www.Windows.Microsoft.com/en-us/Windows/downloads/service-packs?WT.mc_id=MSCOM_EN_US_DLC_HIGHLIGHTS_131W4ENUS21980

  Click on Windows vista, the former services Get packs free of charge and chose the 32-bit or 64-bit depending on what version you have.

  To check

  1. • Open the Windows 'Start' option and click on 'control panel '. Click on "System and Maintenance", then select "system". A new window opens.

     • 2

       You should see 64-bit or 32-bit under 'System' in the new window. If you use a 32-bit system, you can find out if your PC is capable of running a 64-bit system. To find out if your computer can run a 64-bit system, click again on "System and Maintenance" in the control panel and select "information on the performance and tools." Spearhead of a new window.

     • 3

       Click on "View and print details." You should see the operating system that you use under "Type of system." You will see "compatible 64" if it is 64 bit

  Tell me if this helps

• Cannot install some service packs of windows

  I tried to apply the updates of my software Vista premium home.  When I do, I get the error message 00000643 for "Security update for Microsoft .NET framework, Version 1.1 Service Pack 1 (KB929729)", an unknown error.  If anyone can help. This has happened since October 2008.  Thank you.
  Steven

  Hello Steventomaryn,

  You need to remove all previous versions of the .net framework from the computer and then you will have to re - install on the computer.

  To remove all versions of .net frameworks of the computer download and run the .net Framework Cleanup Utility from the link below:
  http://blogs.msdn.com/astebner/attachment/8904493.ashx

  Once you have deleted all the .net framework on the computer, restart the computer, and then run Windows Update s and it will start to install all updates to update .net framework.

  This should solve your problem. Please answer me if it helps.

  Cheers and enjoy... :))

• Cannot install the Service Pack

  After a fresh my Windows vista 32 bit OS and before reformatting to install all programs, I am now unable to install Service Pack 1. Both in standalone or through windows update.

  At the beginning of the phase 3 installation of 3, the computer screen will corrupt (black with white verticle lines) and remains corrupted for 10 hours. Eventually an interference between step 2 of 3 and my graphics card/driver? If I turn the system still works between 3 to 10 hours and boot mode safe, corruption will go and step 3 of 3 will start 35%. If left at 100% he inform to me that he couldn't install and restoration of the changes.

  The PC is a Dell XPS420 standard with upgrade G-card (GeForce 9800 GT) using the latest drivers and ram upgrades.

  I had no end of problems with windows update. Indeed, I reformatted the OS simply because windows update was previously impossible to install SP2 (missing error element) I tried everything recommended on the net by the countless times (checksur/fixit/sfc/autonomous/safe mode) for more than 20 hours and am about to throw the pc out the window.

  There is no virus programs or indeed all running programs and the windows firewall is disabled.

  Anyone who reads this may have a similar problem could try to uninstall the driver graphics card by going to Device Manager, find the graphic card and uninstalling the driver.

  It is possible that this is what I should have done rather than reformat or try to repair, sfc, fixit or checksur my operating system scan when I found myself unable to install SP2 a few days ago.

  If you are in a similar position, use a GeForce 9800gt and consider to reset your Vista operating system to the original image, give this a go first.

  If you are a microsoft engineer and are pondering ways to improve the experience of vista, I would suggest removing the reccomendation "solution found - go to the NVIDIA website and search for the latest version of the driver" who appears almost instantly after the re-establishment of a system like mine to the factory settings and suggests instead that they are downloaded all updates first using windows update. One of these updates (after SP1) seems to have included a functioning driver for my graphics card and now it seems to work normally when installing SP2 successfully.

  Now if only I could get these 30 hours of my life back...