Time scale: change of executives at the second question (photo)

Similar Questions

• Dial 1172 error, a run-time error of a VI in the second time in the DLL

  Hi all

  I am a beginner in labVIEW.

  I have to write a test program in labVIEW that uses a DLL created by another programmer.

  I called the DLL of my labVIEW for control of DIOs, a serial port, communicate with a slave device, a flashing task.

  During the test program, I found that the program is OK if I use it just once, however, if I want to execute coninuously using one-loop While, it failed with

  Error 1172.

  As far as I could understand, it seems that the DLL creates a log file in C:\ so that he was called for the first time, and the process does not take control of this logfile even after the closure of the DLL.

  Then when the DLL is called for the second time, it looks for the same log file to write new info, but as he was taken control by the previous process, there is an error.

  Please find the attached files.

  Hope there will be someone who can help me to point out my mistakes in my vi or suggest me a solution for this.

  Thank you and best regards

  Aung

  (Because the system does not accept the attachment of the DLL, I changed the extension to .pdf for the DLL file)

  This is the DLL file (I have lack of attachment in the post)

• Conversion of HH24:MI:SS to the second question

  Hello everyone,
  
  I am fairly new (read: about 2 days) for the entire PL/SQL world and I have a small problem with one of my projects. I have googled and looked around forums and tried to apply what I took place, but so far without success.
  
  The general situation is the following:
  
  I create a .bat file that allows to retrieve data in a comma-delimited file and 'download' the data in a table of my choice. However, in the file, I am 'loading', one of the columns contains a time value of the HH24:MI:SS type (for example: 0:05:32). The sequence of the column in the file matches that of my table and the .bat file.
  
  My stand-alone table to test this conversion looks like this:
  
  Table: Conversion_Test
  
  Column name data type
  NUMBER OF AUTO_ID (12)
  NUMBER OF TIMES (12)
  WORK VARCHAR2 (32 bytes)
  DATE OF UPLOAD_DATE
  
  AUTO_ID and UPLOAD_DATE columns are filled by the triggers that have been tried, tested and found to be working very well. My test file contains 1 row data raw (no header or any other information is present).
  
  I managed to convert the HH24:MI:SS in seconds through SQL * more interface with the following query:
  
  ----------------------------------------------------------------------------------------------------------------------------------------
  SELECT
  SYSDATE, to_number (substr (' 00:05:32 ', 1, 2) * 3600 + substr ("00:05:32 ', 4, 2") * 60 + substr (' 00:05:32 ', 7, 2))
  of the double
  
  Which returns the correct result:
  
  SYSDATE
  --------
  TO_NUMBER (SUBSTR (' 00:05:32 ', 1, 2) * 3600 + SUBSTR (' 00:05:32 ', 4, 2) * 60 + SUBSTR ("00:05:32)
  --------------------------------------------------------------------------------
  23/10/08
  332
  
  Relevant potential content off (not entirely) .bat file:
  
  DOWNLOAD THE DATA
  INFILE 'dat\%date%.dat '.
  Add
  IN THE Conversion_Test TABLE
  FIELDS TERMINATED BY '; '.
  (
  XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX *.
  Working
  )
  
  * XXXXXXXX = location of relevant statement.
  
  I tried to reproduce the results of my query sysdate with the following statements:
  
  1 time "to_number (substr ('Time', 1, 2)) * 3600"" +"to_number(substr ('Time', 4, 2)) * 60 "" " + " to_number(substr ('Time', 7, 2))"",
  
  This generates the following error message:
  
  SQL * Loader-350: Syntaxiserror in the 7th.
  ', 'from') ' expected, '+' found.
  Time "to_number (substr ('time', 1, 2)) * 3600" + "to_number (substr ("Time"^)).
  
  
  2 time "to_number (substr ('Time', 1, 2)) * 3600 + to_number(substr ('Time', 4, 2)) * 60 + to_number(substr ('Time', 7, 2))" "."
  
  3 time "to_number (substr ('Time', 1, 2)) * 3600 + (substr ('Time', 4, 2)) * 60 + (substr ('Time', 7, 2))" "."
  
  These generate the following error message:
  
  Sheet 1: denied-error in the table CONVERSION_TEST, TIME column.
  ORA-01722: invalid number
  
  4 time "to_number (substr ('time', 1, 2)) * 3600 + (substr ('Time', 4, 2)) * 60 + (substr('Time',7,2)) double«,»»
  
  This generates the following error message:
  
  Sheet 1: denied-error in the table CONVERSION_TEST, TIME column.
  ORA-00917: lack of comma
  
  Question: I want to do is turn this HH24:MI:SS 'format' in seconds and then put them in a column of my table numbers by running the .bat file.
  
  I hope I've provided enough information to give you a good overview of the problem and possible solutions.
  
  With respect,
  
  Luhaine
  
  Published by: user10465140 on 23-Oct-2008 07:28
  
  Published by: user10465140 on 23-Oct-2008 07:30
  
  Published by: user10465140 on 23-Oct-2008 07:30
  
  Published by: user10465140 on 23-Oct-2008 07:33 - Clearafication and clean.

  .. .or let Oracle do the math:

  time "to_number (to_char (to_date (: time, 'HH24:MI:SS'), 'SSSSS')).

• Conversion to the second question time scale

  In the project settings, I specified to use a 00:00:00:00 of time code where the timeline should display hours, minutes, or seconds in the film. However, the timeline shows still frames as you can see below. What I am doing wrong?

  

  perfectblue wrote:

  The first problem, I noticed that it's when I go back to the settings of composition, or view the timeline, it shows one minute and six seconds (0:00:01:06) for the duration of the model

  No it's not. He demonstrated a second and six executives.

• Executives by the second largest file size?

  Is more FPS translated into a larger file?

  Laughing out loud

• When I installed for the first time the creative cloud I did not fit into the second computer and now I don't know how to do this. Can someone help me?

  When I installed creative cloud for the first time I was not installed in the second computer and now I don't know how to do this. Can someone help me?

  Hello

  Please refer to the help documents below to download the application Adobe CC:

  Creative cloud to desktop

  Download, install, update or uninstall applications

  Kind regards

  Sheena

  Moving to the cloud creative download & install

• First Quiz question is ignored during the second attempt.

  Hi all

  I have this weird problem with a quiz.

  Situation

  With Captivate 6.1, I have a Question of pool with 5 questions. The issues are all 1.7 sec on the timeline with the standard pauzé at 1.5. No feedback is given, all buttons are disabled except the submit button.

  In the project, I have 5 random slides, related to the question of the questions pool.

  The quiz settings: 80% for spend, infinite attempts.

  Question

  When I start the second or third try of the quiz, the first question is shown, but after a second or two, publication (SWF and SWF-SCORM) continues to the second question.

  It has not resolved

  These things I tried:

  1. Reissue with "Force republish all slides" selected.
  2. Removing all the Question slides in the project and recreate them from scratch.

  Can someone help me with this?

  Best regards

  Dieter

  I have heard some evidence that you should never set quiz question slides less than 3 seconds in length.

  Try to make all the quiz questions about 3 seconds with the break point to 1.5 seconds and see if it improves the problem.

  Another request: do you have removed or replaced one of the elements by default question slide as the legend of the Question title or caption of the Question text? If so, which can also cause behaviors glitch.  You will need to delete questions that you have changed this way and replace them with quiz question slides.

• Creation of the second issue of a magazine iPad

  The first question is therefore ready to go on iTunes and approved by Apple...

  When I come to the second question, I'm a little unsure of the generating process viewer - can anyone help?

  So my first question is charged as long as:

  ----

  Name of the observer: design every month

  Type of Viewer: several questions

  Title (display of the library): Design Magazine monthly

  ----

  How can I specify the second question?

  I guess it's:

  ----

  Name of the observer: design every month

  Type of Viewer: integrated unique number

  ----

  Is this correct?

  Also, how turn on kiosk software change things (or even at all)? That is specified in the first issue as "Multi-probleme with iTunes subscription?

  No, this is not correct. You do not use the constructor of the Viewer to create the second issue of your magazine. You use the same Adobe ID you used to create the application (the 'Adobe ID for title' option) for you connect to the Folio Builder Panel and you create a new folio. When you publish this new folio, it appears as a new question in your viewer application.

  For your customers, allowing the application of booth means they'll run your viewer using the device of newsstand and questions will be downloaded in the background. For you, this means that you will need to create an app for the subscription set up push notifications (if you have not already done so) and resubmit your viewer to Apple. See the ipad edition companion guide on the dashboard for more details.

• How can I get Windows Photo Viewer (7) to play his slide show on the second monitor?

  I attach a second monitor to my laptop with an RGB cable.  I would like to be able to play the slide show and screen saver of photo on my extra monitor instead of on the little tiny screen on the laptop.  Is there a way of photo windows 7 Configuration Viewer to do?

  Hello

  Thanks for posting your query in Microsoft Community.

  From the description of the problem, you are not able to play slide on the second monitor photo viewer. I'll be happy to help you on this question.

  I suggest you try the steps from the following link on how to move the windows or the programs between the different monitors.

  Work and play better with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  Move windows between multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitors

  I hope this helps! Let us know if you need help with Windows in the future. We will be happy to help.

• Save the problem with Photo Story 3 on Windows 7

  I managed to install Photo Story 3 on Windows 7 Home Premium, 32-bit.  The program works until I come to save the project and then just before the end of the process 'save', the following error message:

  "Some photo story program files may be damaged. Re-install Photo Story 3 for Windows and then change and resave your project."

  I did it at least four times, with the same result. Any suggestions please

  Hi GeorgeTroynar,

  ·         This is the first time that you try to save the project with Photo Story 3?

  You can completely uninstall the application and then install in clean boot state and check if it works.

  For more information about uninstalling a program and a clean boot, see the following articles:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned at step 7 of the article mentioned above.

  Let us know if that helps.

• How to copy and paste text from the page of the book one photo to another.

  Hello, I downloaded this software 2 days ago, and I had so much fun with it. pls I need help on how to copy and paste text from the page of the book one photo to another. Second, how to copy my photo book completed pages project to another laptop computer for printing. Thank you

  Wow! I solved the first problem, I clicked on 'ctrl c' to copy and "ctrl v" to paste. yipppppeee! now am loving this software d most just need help with the second question now

• OUT OF THE BOX QUESTION C60

  Anyone know if the same firmware is installed in sw1 and sw2 on a C60 out of the box?

  SECOND QUESTION: what happens if none is the process to factory reset a C Series codec if for some reason, unable to use the serial port?

  Thank you.

  Hello

  Only one of the memory banks must be populated with a version of the software out of the box.

  The second question depends on which codec C series you mean. C20 can be hard reset (power button sequence) while C40, C60 and C90 cannot and must be done either through web series, touch, telnet or ssh where each of them except series requires a network connection.

  / Magnus

• In Labview 8.6 and MAX, I can change a scale for a voltage read the string in a task once the application has been built and installed.

  In Labview 8.6 and MAX, I can change a scale for a voltage read the string in a task once the application has been built and installed on a second PC. Where's the info of the scale which is held?

  Hello

  Once you have built your VI and compiled into an executable file and deployed on another machine, it essentially becomes a file read-only, which means that you will not be able to change the balance in this deployed application.

  Kind regards

  Marcus

• How to trace my chart according to the time scale?

  Hey a little help please. Im trying to draw a waveform on a graph in LW/CVI. The X_Axis is the scale and time axis is amplitude. I use a loop for to generate the matrices X and Y. I'm not sure how do the X table matches the time scale. I need X for increment in milli seconds. I changed the category axis of the chart hour time / absolute relative, but the problem is how to make the loop for incrementing the X-Array according to the clock.

  Thanks for your help;

  Rohit

  Hi Rohit,

  It is a fine example called TimeDateUnits that illustrates a continuous update of a xy graph, maybe you can have a look?

• For the second time in six months, Thunderbird seems to have lost all my emails content.

  I have Thunderbird loaded on a MacBook Pro. For the second time in six months, disappeared the conent of all emails. I have a list of emails, but the content does not appear in the reviewing pane or if I open the e-mail. I made no changes to the computer Professor at Thunderbird. It's very frustrating! Any ideas as to what is happening?
  Mike

  Do you also have an anti virus program for the second time in six months has quarantined you Inbox?