Conversion to the second question time scale

Similar Questions

• Time scale: change of executives at the second question (photo)

  For some reason any rule displays the images and not in seconds. I tried to browse the different modes of time by ctrl clicking on it as well as modifyign in file-> settings of the project, but the seconds will not be displayed on the time scale. Please look at the picture below. I also tried to reset the standard workspace by default with no result.

  What I am doing wrong?

  Thank you

  

  The top timeline in your first post IS showing seconds.  You're just expanded it so that it divides also seconds from executives.  So it is meaning 1:00f (1 second) then 10 frames, 20 frames, then 2:00f (2 seconds).

  Do more than the model is visible in time and you will see the frame identification disappear.

• Conversion of HH24:MI:SS to the second question

  Hello everyone,
  
  I am fairly new (read: about 2 days) for the entire PL/SQL world and I have a small problem with one of my projects. I have googled and looked around forums and tried to apply what I took place, but so far without success.
  
  The general situation is the following:
  
  I create a .bat file that allows to retrieve data in a comma-delimited file and 'download' the data in a table of my choice. However, in the file, I am 'loading', one of the columns contains a time value of the HH24:MI:SS type (for example: 0:05:32). The sequence of the column in the file matches that of my table and the .bat file.
  
  My stand-alone table to test this conversion looks like this:
  
  Table: Conversion_Test
  
  Column name data type
  NUMBER OF AUTO_ID (12)
  NUMBER OF TIMES (12)
  WORK VARCHAR2 (32 bytes)
  DATE OF UPLOAD_DATE
  
  AUTO_ID and UPLOAD_DATE columns are filled by the triggers that have been tried, tested and found to be working very well. My test file contains 1 row data raw (no header or any other information is present).
  
  I managed to convert the HH24:MI:SS in seconds through SQL * more interface with the following query:
  
  ----------------------------------------------------------------------------------------------------------------------------------------
  SELECT
  SYSDATE, to_number (substr (' 00:05:32 ', 1, 2) * 3600 + substr ("00:05:32 ', 4, 2") * 60 + substr (' 00:05:32 ', 7, 2))
  of the double
  
  Which returns the correct result:
  
  SYSDATE
  --------
  TO_NUMBER (SUBSTR (' 00:05:32 ', 1, 2) * 3600 + SUBSTR (' 00:05:32 ', 4, 2) * 60 + SUBSTR ("00:05:32)
  --------------------------------------------------------------------------------
  23/10/08
  332
  
  Relevant potential content off (not entirely) .bat file:
  
  DOWNLOAD THE DATA
  INFILE 'dat\%date%.dat '.
  Add
  IN THE Conversion_Test TABLE
  FIELDS TERMINATED BY '; '.
  (
  XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX *.
  Working
  )
  
  * XXXXXXXX = location of relevant statement.
  
  I tried to reproduce the results of my query sysdate with the following statements:
  
  1 time "to_number (substr ('Time', 1, 2)) * 3600"" +"to_number(substr ('Time', 4, 2)) * 60 "" " + " to_number(substr ('Time', 7, 2))"",
  
  This generates the following error message:
  
  SQL * Loader-350: Syntaxiserror in the 7th.
  ', 'from') ' expected, '+' found.
  Time "to_number (substr ('time', 1, 2)) * 3600" + "to_number (substr ("Time"^)).
  
  
  2 time "to_number (substr ('Time', 1, 2)) * 3600 + to_number(substr ('Time', 4, 2)) * 60 + to_number(substr ('Time', 7, 2))" "."
  
  3 time "to_number (substr ('Time', 1, 2)) * 3600 + (substr ('Time', 4, 2)) * 60 + (substr ('Time', 7, 2))" "."
  
  These generate the following error message:
  
  Sheet 1: denied-error in the table CONVERSION_TEST, TIME column.
  ORA-01722: invalid number
  
  4 time "to_number (substr ('time', 1, 2)) * 3600 + (substr ('Time', 4, 2)) * 60 + (substr('Time',7,2)) double«,»»
  
  This generates the following error message:
  
  Sheet 1: denied-error in the table CONVERSION_TEST, TIME column.
  ORA-00917: lack of comma
  
  Question: I want to do is turn this HH24:MI:SS 'format' in seconds and then put them in a column of my table numbers by running the .bat file.
  
  I hope I've provided enough information to give you a good overview of the problem and possible solutions.
  
  With respect,
  
  Luhaine
  
  Published by: user10465140 on 23-Oct-2008 07:28
  
  Published by: user10465140 on 23-Oct-2008 07:30
  
  Published by: user10465140 on 23-Oct-2008 07:30
  
  Published by: user10465140 on 23-Oct-2008 07:33 - Clearafication and clean.

  .. .or let Oracle do the math:

  time "to_number (to_char (to_date (: time, 'HH24:MI:SS'), 'SSSSS')).

• Notes crashes in the second each time I open it.

  Notes crashes evertime I try to open it. I tried closing, discount, etc, nothing works.

  Try to keep these keys at the same time for at least ten seconds, until the Apple logo appears: a) the sleep/wake button and the low Volume button (7 iPhone iPhone 7 and more) or b) the sleep/wake button and the Home button (all other models)

• First Quiz question is ignored during the second attempt.

  Hi all

  I have this weird problem with a quiz.

  Situation

  With Captivate 6.1, I have a Question of pool with 5 questions. The issues are all 1.7 sec on the timeline with the standard pauzé at 1.5. No feedback is given, all buttons are disabled except the submit button.

  In the project, I have 5 random slides, related to the question of the questions pool.

  The quiz settings: 80% for spend, infinite attempts.

  Question

  When I start the second or third try of the quiz, the first question is shown, but after a second or two, publication (SWF and SWF-SCORM) continues to the second question.

  It has not resolved

  These things I tried:

  1. Reissue with "Force republish all slides" selected.
  2. Removing all the Question slides in the project and recreate them from scratch.

  Can someone help me with this?

  Best regards

  Dieter

  I have heard some evidence that you should never set quiz question slides less than 3 seconds in length.

  Try to make all the quiz questions about 3 seconds with the break point to 1.5 seconds and see if it improves the problem.

  Another request: do you have removed or replaced one of the elements by default question slide as the legend of the Question title or caption of the Question text? If so, which can also cause behaviors glitch.  You will need to delete questions that you have changed this way and replace them with quiz question slides.

• Display the date and time in Oracle Application Express Page

  Hello
  
  I have a requirement to prove the date and time in the upper left corner of the page that will be updated permanently. The format is DD-ME-AAAA HH24:MI:SS.
  I am able to display the date but not the time. Also the time should be updated on its own at the last second.
  
  Another condition is that on the selection of a particular value in the dropdown the table values must be filtered
  
  Thanks in advance for help out me
  
  You can also send in reply to [email protected]
  
  Concerning
  Franco of Jude

  Hello

  For the second question, you can search this forum on the "load lov. You are not the first who raised this issue... and there are a lot of answers there.

  And now: the time of the server. This can be very difficult, because the time on the server can depends on the physical location (and advanced the time on the server) and if you are using zones, it will be even harder. If your users see once on their screen as real-time, you will get a lot of questions.
  And you don't want to update the time (from the server) every second... every second a call from database to get the sysdate to all your users seems a very bad idea. However, what you might do is starting with the actual SYSDATE from the server and pass it as an argument to the clock function and add a second every second... But it will change the minutes and hours also... Overall: it sounds like a bad idea.

  Greetings,
  Roel

  http://roelhartman.blogspot.com/
  http://www.bloggingaboutoracle.org/
  http://www.Logica.com/

• OUT OF THE BOX QUESTION C60

  Anyone know if the same firmware is installed in sw1 and sw2 on a C60 out of the box?

  SECOND QUESTION: what happens if none is the process to factory reset a C Series codec if for some reason, unable to use the serial port?

  Thank you.

  Hello

  Only one of the memory banks must be populated with a version of the software out of the box.

  The second question depends on which codec C series you mean. C20 can be hard reset (power button sequence) while C40, C60 and C90 cannot and must be done either through web series, touch, telnet or ssh where each of them except series requires a network connection.

  / Magnus

• Creation of the second issue of a magazine iPad

  The first question is therefore ready to go on iTunes and approved by Apple...

  When I come to the second question, I'm a little unsure of the generating process viewer - can anyone help?

  So my first question is charged as long as:

  ----

  Name of the observer: design every month

  Type of Viewer: several questions

  Title (display of the library): Design Magazine monthly

  ----

  How can I specify the second question?

  I guess it's:

  ----

  Name of the observer: design every month

  Type of Viewer: integrated unique number

  ----

  Is this correct?

  Also, how turn on kiosk software change things (or even at all)? That is specified in the first issue as "Multi-probleme with iTunes subscription?

  No, this is not correct. You do not use the constructor of the Viewer to create the second issue of your magazine. You use the same Adobe ID you used to create the application (the 'Adobe ID for title' option) for you connect to the Folio Builder Panel and you create a new folio. When you publish this new folio, it appears as a new question in your viewer application.

  For your customers, allowing the application of booth means they'll run your viewer using the device of newsstand and questions will be downloaded in the background. For you, this means that you will need to create an app for the subscription set up push notifications (if you have not already done so) and resubmit your viewer to Apple. See the ipad edition companion guide on the dashboard for more details.

• I am a user of Picasa for a long time conversion to Lightroom.  I share photos with dropbox on a MAC, a Windows computers, storing images and the catalog in dropbox.  I'm able to share the LR catalog, but on the second system images can be found as s

  I am a user of Picasa for a long time conversion to Lightroom. I share photos with dropbox on a MAC, a Windows computers, storing images and the catalog in dropbox. I'm able to share the LR catalog, but on the second system images can be found as a prefix system DB files have different user names. Any ideas?

  At the point of Lightroom to another location for photos, follow these instructions:

  http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

  Note: If the catalog is constantly being synchronized to DropBox, you will most likely follow these instructions whenever you open the catalog on another computer.

• Distiller will suddenly end/crash the * SECOND * time I open a file for conversion to PDF.

  The subject says it all: Distiller will suddenly end/crash the * SECOND * time I open a file for conversion to PDF.

  But I think I have an idea why this is happening. In general, I use Distiller to convert EPS or PS files as PDF files. In addition, almost without fault, I incorporate the required (only of Type 1) fonts directly in files EPS/PS (using the required format to PFA) so no local fonts on my computer are needed to be looked at to distill in to be embedded in the file PDF. they are already in the EPS/PS files.

  But yesterday, I tried to convert EPS/PS files to PDF using Distiller in which I had NOT embedded fonts Type 1 (PFA format, of course) in the source of EPS/PS files. All first this conversion would work (in which I select "open" and choose an EPS/PS file for conversion), but after this initial conversion, the * SECOND * time I clicked "Open" the file, Distiller would immediately close/crash.

  Then, I searched the web for answers and discovered that some people have trouble distilling to initialize if all their computer system fonts were read-only. So I went back to my EPS/PS files and embedded fonts Type 1 (PFA format) required in them and then - as if by magic - distill worked without a hitch: I could open and convert any number of them in succession, with distilling never close / crashing.

  Then, I found the reason why distilling had been crashing at the second attempted to open a file (once again, simply by pressing the "open" button to find a file to convert, * no * after selecting a file) must have something to do with distilling scanning fonts installed on my computer, when there was no PFA font incorporated to make reference to , and a read only font on my system was the cause of the problem. However, I have looked in both places of logic where my fonts must be located (c:\psfonts and c:\windows\fonts), but found * no. attributes * files fonts defined in 'read only' so, I'm stumped.

  I use Distiller Pro 10.1.1316 (acrodist.exe) on a machine to earn 8.1. I found similar positions, which dates back to 2004, about Distiller crashing immediately after opening when certain fonts are read-only; I haven't found a post about anyone successfully using Distiller to convert EPS or PS to PDF and then have the program crash when the "Open" button is pressed subsequently. The clues, anyone?

  Background: Distiller Server is a product discontinued long - ago - use of Distiller server is now simply prohibited, and LiveCycle PDF Generator is available for servers.

  Since you are not using Distiller Server and this forum is essentially abandoned, I recommend that you try the Acrobat - forum creation (etc.) instead.

• How to trace my chart according to the time scale?

  Hey a little help please. Im trying to draw a waveform on a graph in LW/CVI. The X_Axis is the scale and time axis is amplitude. I use a loop for to generate the matrices X and Y. I'm not sure how do the X table matches the time scale. I need X for increment in milli seconds. I changed the category axis of the chart hour time / absolute relative, but the problem is how to make the loop for incrementing the X-Array according to the clock.

  Thanks for your help;

  Rohit

  Hi Rohit,

  It is a fine example called TimeDateUnits that illustrates a continuous update of a xy graph, maybe you can have a look?

• Time scale does not properly after separation of the two signals of virtual channel

  Hi all

  I have a problem when I use a virtual channel with two analog inputs. I'm cutting the two signals into two separate tables of waveform, as shown in the attachment. The two signals seem to be reading very well, the problem is that the time scale (x-axis) begins to act on the strange. Seconds displayed time seems to keep jumping up and down at a high frequency, resulting in the two signals of displayed does not correctly in the table of waveform. Could someone please try to help me? Any help would be greatly appreciated!

  Thanks in advance.

  Try to acquire a signal with first time information. You can replace the DBL 2D with a data type of 1 d wave. You don't need this code extra silly - just a function of Board Index to get the separate channels.

• Has been able to play games downloaded the first time, but can't open the second time I try

  Original title: could not open the file

  I downloaded a few games and the first time, I could read, but when I tried to open the second time, they just won't open.

  It would show the loading symbol, but nothing happens?

  Help?

  Hello

  • Did you follow the steps?

  Try to run the game in compatibility mode and check.

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  If the problem persists, try to uninstall and then reinstall the game and check if this may help. You can also post your question in the support forum for Big Fish Games and control upgrade game.

  http://forums.bigfishgames.com

  Hope this helps

• Question on "Scale to the size of the image by default"

  Hello

  I put my sequence of 1080 p at 25 fps.

  However, my source material are a mixture of 4K video and also extracts of 720 p and also some pictures.

  I noticed that if I uncheck the "Default scale to the size of the image" box, each time, I put the clips imported into the timeline, it's too big and I have to go the effect controls panel to reduce the size. It is very time consuming especially if I have a lot of 4K video clips on the timeline.

  According to me, that if I check the box of 'Default scale to the size of the image', when I put the 4K video on the timeline, it fits very well. My question is when I enlarge him to say the Pan effect, of the resolution will be downgraded compared to when I do not check the "default scale to the size of the image" box?

  Thank you

  If you use the scale to the size of the image, either in manual application or by ticking the "default image size scale" in preferences, your clips will be scaled down (in the case of the 4 K sequence) or upwards (in the case of the sequence of 720 p). In both cases, the clips on the timeline for reference the original source material, so all of the pixel content present in the 4K source, for example, is always available for you to resize.

  You will notice, however, that if you open Motion and see the scale component - it will read 100% because - the clip on the timeline has indeed been reduced to sequence frame size - making it difficult to * how the clip was be reduced or enlarged as the balance indicates the same.

  A better way to edit the clips to the timeline the clip on the timeline, and then select and right click or control click and choose the size of the image, the value and now scale will reflect the percentage reduction or expansion, so you can see how much you can resize until you start to lose resolution.

  Unfortunately, the set to the size of the image is not yet available as a default, you will need to use it manually.

  MtD

• HA elections issues, getting only one agent as master and waiting for the second time

  I am facing a strange question HA.

  Much more kit (2 hosts, vcenter) virtual, DAS storage. VSphere 5.1 latest patches. 1 datacenter, 1 together inside with 2 guests.

  While trying to activate HA (with default settings), an election was held where a master and an error in time-out for the second host. Funny thing is that if I force a new election manually on the two hosts, the first I click to become master, second error timeout showing later.

  The two machines are able to ping the other subnet vmotion and network management subnet.

  I triple check the connections & Configuration of VLAN on the physical switch-> no other success

  I changed vswitch assignment & design in at least 4 different ways-> no other success

  I did break the cluster and datacenter, recreate new-> same question.

  I took both of my hosts (1 at a time) off the VirtualCenter and back in--> no other success

  I do NOT recreate my vCenter (of less not yet...)

  I have NOT reinstall any of my guests from scratch (of less not yet...)

  All constructive ideas?

  There is a kind of strangeness network here. FDM on each host cannot see the election messages sent by the other (on port udp 8182) so each one chooses himself as captain and brand a title "fdmUnreachable". They mark the other as network partitioned because they can ping (using icmp). It's just the udp/TCP traffic 8182 which is not cross.

  Elisha