Time zone offset problems

Similar Questions

• Time zone offset error installation forms 11.1.2 emagent step

  Tired of trying, and I have a little more investigating this problem, and I got this error when I try manually start the emagent:
  
  
  C:\Users\Administrador > F:\oracle\FMW\asinst_1\EMAGENT\emagent_asinst_1\bin\emctl
  Agent resetTZ .bat
  Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
  Copyright (c) 1996, Oracle Corporation, 2009. All rights reserved.
  Update F:\oracle\FMW\asinst_1\EMAGENT\emagent_asinst_1/sysman/config/emd.prope
  stakeholders...
  -Wednesday 2 May 18:21:19 2012::tzOffset for America/Caracas is - 240 (min), but a
  Ghent is runnning with tzOffset-270 (min)
  -----
  -Wednesday 2 May 18:21:19 2012::trying again after a wait of 1 second for account
  for the transition from the light of day
  -----
  -Wednesday 2 May 18:21:19 2012::tzOffset for America/Caracas is - 240 (min), but a
  Ghent is runnning with tzOffset-270 (min)
  -----
  resetTZ failed.
  The agentTZRegion in:
  F:\oracle\FMW\asinst_1\EMAGENT\emagent_asinst_1/SYSMAN/config/EMD. Properties
  is not in agreement with what the agent thinks it should be.
  Difficulty of your environment.
  Choose a TZ value that corresponds to the zone parameters:
  F:\Oracle\FMW\Oracle_FRHome1/SYSMAN/Admin/supportedtzs.lst
  
  
  the 'supportedtzs.lst' file contains the line America/Caracas
  Thus, any idea about this error?
  
  Windows 2008 sp2 x 64 standard
  WebLogic 10.3.5 32bits
  32-bit forms_reports_11.1.2
  
  Thank you very much!

  Have you checked whether the zone at the OS level setting (for example using systeminfo or look at the register) is compatible agent time zone setting.

  To check the setting of the agent time zone:
  emctl config agent getTZ

  If necessary, consult the following doc or support Note 825933.1 to reset the time zones:
  http://docs.Oracle.com/CD/E11857_01/EM.111/e16790/ha_agent.htm#EMADM9778

  Kind regards
  -Loc

• My IPhone 6s did the update of battery charge you change the time manually or time zone. I wonder if the problem is in the IOS or mobile phone? I say that because I changed my IPhone in a Bar in engineering (Brazil) 6, precisely because of this problem an

  My IPhone 6s did the update of battery charge you change the time manually or time zone. I wonder if the problem is in the IOS or mobile phone? I say this because I have changed my 6 IPhone in a Bar of genius (Brazil), precisely because of this problem, and the new cell has exactly the same problem

  This is a known, problem if the time is not set correctly.

  us-not-displaying-accurate-battery-data http://AppleInsider.com/articles/16/01/16/Apple-promises-Fix-for-iPhone-6S-6S-pl

• Having a problem in DateFormat when the time zone is changed...

  Hi, the following code converts a Date string to a Date which I am able to successfully... The problem I am facing is when I put the Moble zone as the format of Casablance (GMT) and my Format for a Date string is "2009-09-27 03:02:00:00 of" "" then I am to get the hour of the date as "kills Sep 27 03:02:00 GMT 2009", but when the time zone is changed to Canberra, Sydney (+ 10), the Date is "Mon Sep 28 19:37:13 Australia/Sydney 2009"... which is not the correct date in strgin Format ' "» nicely in this matter helps no matter what time zone after the conversion, I should get the date given to a string date... help kindly with respect to thei...

  public static Date getDateTmeFrmStrgFormat(String strDate)
       {
  
           Date date;
           String month,day,year,hour,min,sec;
                       month = strDate.substring(0,strDate.indexOf("/"));
              if(month.length() < 2) month = "0" + month;
  
              strDate = strDate.substring(strDate.indexOf("/") + 1);
  
              day = strDate.substring(0,strDate.indexOf("/"));
              if(day.length() < 2) day = "0" + day;
  
              strDate = strDate.substring(strDate.indexOf("/") + 1);
  
              year = strDate.substring(0,strDate.indexOf(" "));
  
              strDate = strDate.substring(strDate.indexOf(" ") + 1);
  
              hour = strDate.substring(0,strDate.indexOf(":"));
              if(hour.length() < 2) hour = "0" + hour;
  
              strDate = strDate.substring(strDate.indexOf(":") + 1);
  
               min = strDate.substring(0,strDate.indexOf(":"));
              if(min.length() < 2) min = "0" + min;
  
              strDate = strDate.substring(strDate.indexOf(":") + 1);
  
              sec = strDate;
              if(sec.length() < 2) sec = "0" + sec;
  
              //sec = "00";
              date = new Date (HttpDateParser.parse(year + "-" + month + "-" + day + " " + hour + ":" + min + ":" + sec));
              //date = new Date (HttpDateParser.parse(year + "-" + month + "-" + day + " " + hour + ":" + 00 + ":" + 00)); 
  
              return date;
          }
  

  Like this.  This code is NOT tested, it is presented only to explain the use of the calendar in this situation.

  public static Date getDateTmeFrmStrgFormat(String strDate)     {         String month,day,year,hour,min,sec;         month = strDate.substring(0,strDate.indexOf("/"));         strDate = strDate.substring(strDate.indexOf("/") + 1);         day = strDate.substring(0,strDate.indexOf("/"));         strDate = strDate.substring(strDate.indexOf("/") + 1);         year = strDate.substring(0,strDate.indexOf(" "));         strDate = strDate.substring(strDate.indexOf(" ") + 1);         hour = strDate.substring(0,strDate.indexOf(":"));         strDate = strDate.substring(strDate.indexOf(":") + 1);         min = strDate.substring(0,strDate.indexOf(":"));         strDate = strDate.substring(strDate.indexOf(":") + 1);         sec = strDate;         Calendar cl = Calendar.getInstance();         cl.set(Calendar.YEAR,|Integer.parseInt(year));         cl.set(Calendar.MONTH,|Integer.parseInt(month)-1);         cl.set(Calendar.DATE,|Integer.parseInt(day));         cl.set(Calendar.HOUR_OF_DAY,|Integer.parseInt(hour));         cl.set(Calendar.MINUTE,|Integer.parseInt(min));         cl.set(Calendar.SECOND,|Integer.parseInt(sec));         return cl.getTime();     }
  

• Get all time zones with offSet

  I am the all time zones hourly, but without lag.

  I want all time zones with OffSet.

  What I can do.

  I have found no way, so I myself conducted with a custom method.

  Thanks to you all.

• Time zone problems

  How so I know what time zone is mine?

  Choose what time zone?

  I live in Trinidad and Tobago.

  Trinidad and Tobago are in UTC - 4:00 time zone. To change this, click the Start button. On the right side, click on Control Panel. Then click on clock, language and region. Under the date and time, click on change of time zone. A new window will open. In this window, click on change of time zone.  Then select the UTC-4:00 option. This should solve the problem.

• Problem change time zones

  Why pre schedule changing time zones automatically when you travel across the country?  It's very frustrating!  If I'm in Los Angeles Monday and spread the word of a meeting in New York at 12:00 (noon) Wednesday, I just want to put the meeting in my diary for Wednesday at noon. But after traveling across the country, my appointment for Wednesday has moved before 3 hours on my calendar because he thinks that I had the meeting scheduled for 12:00 WEST COAST TIME. Today's meeting shows a 15:00 start time. If I change time zone once again, the meeting on my calendar moves again to reflect the change. My old Palm trees did not do that.  The iphone does not.  I think it's just too ask us to perform calculations of zone in our heads before entering appointments.  PLEASE SOLVE THIS PROBLEM AS SOON AS POSSIBLE.

  DeltaDog

  This feature can be disabled if the zone will not be updated but the time will be even.

  If you open your launcher and then look for a date and time (normally on the 3rd page). Once in here turn off "network time zone" in this way the zone will not update when traveling anywhere.

• time zone problem schedule vCAC Advanced Service Blueprint, VCO Linked Clone Workflow, setting

  If I have problems when you request a catalog from a VCO workflow built-in VCAC article.  I use the workflow VCO "Linked Clone, with a single NETWORK card and Windows credentials" located in VCO under vCenter > > Clone > > Clone bound > > customization of Windows.  I can go through the workflow very well in VCO, but I want to make it available via vCAC.  When I try to download a virtual machine using workflow, the application process fails using the form in the time zone of the form section.  There seems to be a problem with vCAC questioning vCO for doing the research for the appropriate time zone setting.  The application works very well since within vCO, but not inside vCAC.  Thoughts?

  Jeremy

  I ended up using a vCenter customization specification to achieve this.  It turns out that the specification is as a safety net that will configure everything that is defined in the specification, unless there is a custom property configured on the action plan for this setting.  If this is the case, the custom property takes precedence.

  Jeremy

• Problem of time zone: time zone is not consistent

  Problem of time zone: time zone is not consistent
  From sqlplus, the time is displayed:

  SQL> SELECT SYSDATE FROM DUAL;
  
  SYSDATE
  --------
  09-11-11

  from the Windows command line tool:

  D:\coherence\lib>DATE
  The current date is: 11/11/2009
  Enter the new date: (dd-mm-yy)

  But from the Control Panel, it shows at the present time is 10:40.
  For this reason, a database of programs don normally work.

  There are two ways that you could do.
  Track 1:
  Search for a file by the name "glogin.sql" on your client workstation and add the following statement

  alter session set nls_date_format = 'YYYY-MM-DD HH24:MI:SS';
  

  Make sure that you save the file. This change will apply to all users who will connect to the database using SQL * PLUS to your machine.

  Track 2:
  Create a shortcut and place it somewhere (for example on the "DESKTOP").
  Right-click on the shortcut and choose Properties.
  The text corresponding to the box 'Start' to reflect the current location of the shortcut.
  Create a file by the name "login.sql" and place it in the same folder that the shortcut.
  Edit the file and add the following line.

  alter session set nls_date_format = 'YYYY-MM-DD HH24:MI:SS';
  

  Make sure that you save the file.
  When you double-click the shortcut to launch SQL * more and opening of the session, the "login.sql" script is executed.

• Time zone problem Trinidad (requestContext.timeZone)

  Hello
  
  In my application, user publishes his message and my application saves the message in the database with his Post, (server time)
  However, I have to convert it by showing the user.
  
  I tried * #{request.timeZone} * to get the time zone of the user, but unfortunately it shows the time zone of the server.
  Is it possible that I can get the time zone of the client?
  
  Thank you.

  Hello

  you're on JDeveloper 11 or use Trinidad with 10.1.3? Whatever it is, the solution is to use client-side JavaScript and a hodden field to pass information to the server. Using ADF Faces RC you would be able to transmit this information to a listener to server on the server and keep it in a user bean

  Frank

• AirPort Extreme - set time zone

  Greetings:

  I have seen a lot of traffic on the change of the parameter of time zone in an AirPort Extreme, but I can't find an answer.  It seems that it may be impossible.  There is debate if even a hard reset of the device clears the set time zone and allow it to be reset.  It also seems to be no access to the device to terminal implemented a manual correction.

  I left US mountain for the Eastern US time zone time zone.  I have an AirPort Extreme running firmware version 7.6.7 and use version 6.3.6 AirPort Utility.  My AirPort Extreme needs to operate in bridge, because of the way the Internet is provided by our service.  I use the 'access control Timed"to limit the time that my young children are able to access the Internet.

  It should be a simple matter to define the time zone of my AirPort Extreme to my current location (or so it should automatically and reliably).  I don't know if the bridge mode interferes with the ability of the device to find its time zone.

  Can anyone offer advice (other than to apply an offset from my control access timed two hours time difference)?  Can the Genius Bar at my local store to fix?

  Thank you in advance,

  WILX

  Unfortunately, Apple has removed a number of parameters that they feel that the users do not need. Setting the time is one of them.

  Finally, your airport will have the exact time, but it usually takes about 6 weeks for that to happen.  Until then, you will need to manually adjust the access delay settings to compensate for.  When the time of the correction is made, then you have to adjust again timed access.

  We have seen some reports from users who claim that resetting the airport to return to the default settings and then setting them up again will fix the issue of the time, but it has not always worked when I tried it.

  If the 'genius' can solve this problem quickly, then he won the title.

• Error recovery DB TIMESTAMP WITH time ZONE SCHEDULE

  I use Managed Driver version 4.121.1.0 with EF. Trying to extract data from a table that contains a column what data type is TIMESTAMP WITH time ZONE SCHEDULE, I get a "System.InvalidTimeZoneException" in Oracle.ManagedDataAccess.dll.

  This is the statement that I'm executing:

  application of var = db. COORDENADA. Select (x = > new {ID = x.COORDENADAID, CREATED = x.FECHAHORAGPS}). ToList();

  var RES = query. ToList();

  When debugging of I am, I can see the SQL to run:

  SELECT

  "Extent1". "" COORDENADAID "AS"COORDENADAID. "

  "Extent1". "' FECHAHORAGPS ' AS 'FECHAHORAGPS '.

  OF "GEOTRACKER. "" COORDENADA ""Extent1 ".

  which causes no problem in Oracle SQL Developer and get these data:

  COORDENADAID FECHAHORAGPS

  ------------ ----------------------------------

  1 06/03/14 17:10:10, EUROPE 000000000

  / PARIS

  2 02/03/14 00:00:00, 000000000 EUROPE

  / PARIS

  ...

  I think there must be something with the time format returned as name instead of offset, but I can't understand how to check this. Any idea

  This bug has been fixed in Oracle DB 12.1.0.1.6 patch bundle which can be downloaded from My Oracle Support (MOS). After you download the patch bundle, you'll notice that it's a pretty important download. There is no need to install the patch to the entire group on your target computer. Instead, simply extract the managed provider and just install it.

  If you do not have access to MOS, ask your DBA that should, or you can wait for the next version of the ODAC for the fix.

• Create table QA with invalid time zone

  Hello experts,
  
  I have a problem:
  When I create a new table of advanced queue that is the time zone standard + 00:00 in the SYSTEM. AQ$ _QUEUE_TABLES.
  When I queue a message to the QA enq_time differences of two hours with the sysdate. This is because we have a zone schedule + 02:00.
  
  I have a few questions related to the issues:
  
  1. is there a setting to create a QA with the time zone correct offset(+02:00)?
  2. when I update the QA system. AQ$ _QUEUE_TABLES with the time zone correct offset(+02:00) to restart database, nothing happens. The zone is still + 00:00.
  
  I read metalink (bug 5711286) and the forum and all that I can find is dat above issue is fixed in version 11.2.0.1 DB and above.
  
  Below the features of database:
  
  Database 11g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
  
  Thanks in advance,
  
  Ronald

  Hello

  Yes, it's the bug that is supposed to be fixed in 11.2.0.1, if people are still problems in this area to this version or later then this should be raised with Support from Oracle.

  Thank you
  Paul

  Published by: pdtill2508 on Sep 14, 2011 09:45

• Change the time zone of Novosibirsk

  Hi, in Russia/Novosibirsk time zone changing on UTC + 7, but time.euro.apple.com send UTC + 6. When I solve this problem?

  http://www.timeanddate.com/time/zones/NOVT

  It is a forum for user help. You do not discuss Apple here.

  To submit your comments directly to Apple using this link http://www.apple.com/feedback/

• Cannot set the manual time zone on ipad

  IOS is updated. I'm try cnange my time zone manually. Whenever I select a city in new Madrid for example, the time zone remains as Sydney. I am unable to change it. Auto zone has been disabled because it acknowledges that Sydney. Looked far from a solution, but nobody else seems to have this problem.

  I think that 'set automatically' refers to the time, not the time zone. Apple devices are quite picky about having the correct time zone for the location, then you will not be able to change it.