Timecode with Pix 260i and first CC problem

Similar Questions

• Qosmio F60 - starting with Windows 7 and Dynadock U problems

  I recently acquired a new Qosmio F60 and a new port replicator Dynadock U. problem, but it will not start upward unless I disconnect the Dynadock by unplugging the USB cable from the laptop. I downloaded the latest drivers for the F60 and the Dynadock from Toshiba site without change to the problem.

  Also, the entire system in slow frustrating execution of orders despite the fact that the system's processor i7-based.
  I am running Windows Home Premium 64 bit version with Norton Security and have no innstalled unauthorized or unusual software.

  Any ideas?

  Hi Sandgroper,

  All other devices are connected to the Dynadock port replicator? Perhaps the external device is causing the Windows 7 startup problem

  Have you installed latest version of BIOS of Toshiba? As far as I know the new version came out a few days ago

  Check this box!

• Problems with PIX 501 and Server MS Cert

  Hi all

  I have two problems with my PIX 501:

  1. registration works well. The pix has a certificate and use it with SSL and VPN connections. But after a refill, the pix certificate is lost and it has regenerated again self-signed certificate!

  Yes, I wrote mem and ca records all!

  2. at the request of ca CRL , I get the following debugging:

  Crypto CA thread wakes!

  CRYPTO_PKI: Cannot be named County ava

  CRYPTO_PKI: transaction GetCRL completed

  Crypto CA thread sleeps!

  CI thread wakes!

  And the CRL is empty.

  Does anyone have any idea?

  Bert Koelewijn

  Not sure about 1, but 2 is usually caused by the COP (Point of Distribution of CRL, basically the situation where the PIX can download the Revocation list from) listed in cert CA is in a format the PIX does not, generally an LDAP URL.

  Check the following prayer:

  Open the administration tool of CA (Certification Authority) then

  (1) right click on the name of CA and choose 'properties '.

  2) click on the tab "Policy Module".

  3) click on the button "configure."

  4) click on the tab "X.509 extensions".

  > From there, it can display the list of the "CRL Distribution Points".

  Turn off everything that isn't HTTP.

  You need to reinstall the CERT in the PIX, I think, but then it should be able to download the CRL through HTTP instead of LDAP.

• Problem of proportions with consumer camera and first elements 11

  Hello all - I'm Steve. I'm new here. I always do photography on a pro, digital and analog level, but I'm an absolute with video model... but then, I don't want to not do much, just in a rudimentary way cut some family videos, download, etc.

  However, I can't first elements 11 out of my clips self-portrait in a correct aspect ratio.

  My camera is a consumer-model Canon Legria FS200. I shoot in a resolution of the camera calls XP. The device says there are 16:9, the monitor of the camera shows them as 16:9 and when I use the software (called Pixela Image Mixer) provided with the camera to import clips on the disc, I get mpg files that says Windows Explorer (7) are 720 x 576 pixels, and that VLC player display correctly as screen 16:9 without me having to change its display settings.

  However, at the time where I have import into Premiere Elements, they appear horizontally in a hurry, and I can't go out in any other way, with or without changing them in first.

  I tried to use the recipe given here: https://forums.adobe.com/message/5987538#5987538 , (replacing only NTSC PAL because I'm in Germany), namely, defining the predefined together project manually to PAL/Hard Disk etc. / big screen 48 kHz and check strength parameters of the program. But no matter, first displays the video in compressed form horizontally, with large black bars on the right and left.

  On the side of exports, affecting the output PAL DVD widescreen and the format of the pixels in the output widescreen settings do not help, either. Nor did I can manually force VLC player to view the correct aspect ratio. BTW, audio is perfect throughout.

  It is on that I can see myself get without help. Someone at - it an idea?

  Thank you very much in advance,

  Steve, the Germany

  Interpreter all the clips as big screen then onto the timeline.

• Problems with the Windows and Windows Update problem of Installation of KB2416472 component.

  Original title: I use SFC. EXE

  Error detected

  How can I fix this, or I have to re - install window again.

  CSI 0000015a [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  The same with 0000015c detail above.

  00000309 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2010-10-08 12:35:51, CSI Info 0000030b [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2010-10-08 12:35:51, CSI Info 0000030 c [SR] this element is referenced by [l:158 {79}] "' Package_16_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 49_neutral_GDR" "

  00000367 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2010-10-08 12:38:13, Info CSI 00000369 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2010-10-08 12:38:13, CSI Info 0000036 [SR] a the item is referenced by [l:158 {79}] "' Package_16_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 49_neutral_GDR" "
  2010-10-08 12:38:13, CSI Info 0000036 c [SR] full repair

  Having a problem with the Update window for

  Update of security for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2416472)

  I followed the recommendation, that nothing has changed.

  Download size: 4.7 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  A security issue has been identified that could allow a malicious user to compromise your Windows system that is running the Microsoft .NET Framework and gain access to information. You can protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer.

  Thank you

  Hello

  Problems with the Windows Sidebar?

  It seems that the problem is related to the Windows Sidebar. Remove all third-party sidebar gadgets if

  Follow these steps and check if it helps.

  Logon as administrator-

  a. If the sidebar is running - make a right click on the sidebar near the lower clock icon right in and out

  b. Click Start - Type "CMD" in the search box - find top - right click it and run as administrator.

  c. replace C:\Program Files\Windows Sidebar by copying and pasting this command->

  CD C:\Program Files\Windows Sidebar
   
  d. press enter (this is assuming that your sidebar is on C:, otherwise use the letter of the drive is on)

  Guest should be--> C:\Program Files\Windows Sidebar >

  e. then copy and paste each of them following their tour to enter

  regsvr32-u sbdrop.dll

  regsvr32-u wlsrvc.dll

  regsvr32 atl.dll

  regsvr32 sbdrop.dll

  regsvr32 wlsrvc.dll

  Sidebar should now work.

  Also if you scan SFC does not fix a corrupted system file, you can follow the steps from the link below.

  Look under "'If the System File Checker tool can not repair a file, proceed as follows :" "

  As with regard to the installation of KB2416472, to install this hotfix, you must have Windows Installer 3.1 or a later version installed on the computer. To get the latest version of Windows Installer, see the following Microsoft Web site.

  Windows install 4.5 Redistributable
  For maore information, see: http://support.microsoft.com/kb/2416472

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Sync blackBerry with Blackberry classic and computer software problems

  I get persistent on Blackberry link error messages when I try to sync my BB classic with my computer. The message reads: "CPreferences Manager: Configuration for, preferences, Account_5_327628, SyncAccountld_2 not the value inTransConfig.xml for translator RimBB.'»

  What this means and how can I fix the problem, so my sync can be successful, please?

  Thanks a lot for the suggestion. I followed the procedures. I already have the latest version of Windows 7 Professional on my computer and the 1.2 update link to BlackBerry. I've also posted the order suggested in the command prompt. After pressing the Enter key, I launched the Blackberry link again. Unfortunately, the same errors occurred.

  Rather than trying to contact BlackBerry Technical Support Services, I watched again the synchronization process... There seems to be no problems regarding synchronization of the Contacts. However, the mechanism seems to hesitate on the sync of the calendar entries. On this basis, I went back and changed my settings for the calendar so I changed to a two-way synchronization between the device and the computer for a one-way ticket between my device and the computer with a preference given to my device. A message indicating that some elements would be removed from my computer and others from my camera. Given that I printed on my calendar every week from Outlook, I felt that it was worth sacrificing some entries if he allowed the synchronization to continue smoothly. So I accepted the deletions. When I tried to sync again, no error has occurred. At this point I returned to two-way sync as I had before, but always with the preference given to my device.

  Perhaps the above can be useful to others who are struggling with the same error message.

• Fonts with type kit and bello pro problems

  I added bello pro of typekit, but it does not show the correct font face. I also added localhost to my typekit, but only after that, it worked the first time without him.

  

  The new reformatting update has fixed this problem.

• PluralEyes and first CS5 problem

  Hey everybody,

  I'm working on a documentary and recorded on the camera and audio separated on the zoom h4n. I have not saved not in camera audio a lot and was glad to find pluraleyes and I have a LOT to do synchronization. So I downloaded the demo and tried on one of these days, video and audio. Sync up like a charm. However, I noticed that when I go to edit > audio channels and try to select Mono, Stereo, this feature is disabled. I also tried the effect of 'fill the left' to fill my channel dead and it is also disabled. Anyone know what I'm missing? Your help is much appreciated, thank you!

  Well, you shouldn't use it at all. If your audio Master track (it's the bottom one) is mono stereo, regularly the titles will be channelled through two channels of the stereo master track. Try it and you'll see - a mono track will cause the two output level indicators to move also.

  If the audio is only output via a channel, there's probably something happens with pan in the Audio Mixer Panel. Open it and look at the balance for your tracks buttons; they should all be at 12:00 (middle), but maybe they are turned one way or the other. I suspect that you won't have to go that far, though; I think you're probably already configured and ready to go.

• I got a mac book pro with Yosemite. Today started to ask me to enter in the first series. Uninstalled all the app from adobe and I loggin and install all the app and still the problem

  I got a mac book pro with Yosemite. Today started to ask me to enter in the first series. Uninstalled all the app from adobe and I loggin and install all the app and still the problem. What do I do?

  If you are prompted for a serial number in the creative clouds, see this link:

  https://helpx.Adobe.com/creative-cloud/KB/CCM-prompt-serial-number.html

  Guinot

• Problem with the new update first, Photoshop and Illustrator and CC

  Hello

  I wish to inform you that since the last update of the DC Photoshop, Illustrator and first applications. I have problems to open and use programs. Photoshop is impossible to work. The open looks that attempts to load something (Start) and keep trying for any use of the software as well as the Illustrator. Already, the first it opens the window (start) separately, if it has the error, but when I close the software works well. Follow the link to the video to show what is happening.

  
  Video link:
  Error Photoshop, Illustrator and first - YouTube

  
  Best regards

  L. Roma

  Hello! Rio,

  I can't believe that this is the problem. in another forum I received other steps to disable "Start workspace" and it worked. But my laptop is an Inspiron 5421 (2.00 GHz Intel Core i7, 8 GB RAM, 1 TB of HDD, Nvidia GT yards).

  Steps to resolve this problem:
  -Menu Edit-> preferences-> Geral

  -Change the option to 'Open Most Recent' start
  -Restart the first

  Kind regards

  L. Roma

• Problem with the new update Photoshop, Illustrator and first CC

  Hello

  I wish to inform you that since the last update of the DC Photoshop, Illustrator and first applications. I have problems to open and use programs. Photoshop is impossible to work. The open looks that attempts to load something (Start) and keep trying for any use of the software as well as the Illustrator. Already, the first it opens the window (start) separately, if it has the error, but when I close the software works well. Follow the link to the video to show what is happening.

  
  Video link:
  Error Photoshop, Illustrator and first - YouTube

  
  Best regards

  L. Roma

  Hi L.Roma,

  Please go to the Photoshop preferences, then general tab and uncheck the option "Show Start Workspace"

  Restart Photoshop and then let me know if you still have the same problem or not.

  Kind regards

  Tanuj

• Problem with the new update first, Illustrator and Photoshop CC

  Hello

  I wish to inform you that since the last update of the DC Photoshop, Illustrator and first applications. I have problems to open and use programs. Photoshop is impossible to work. The open looks that attempts to load something (Start) and keep trying for any use of the software as well as the Illustrator. Already, the first it opens the window (start) separately, if it has the error, but when I close the software works well. Follow the link to the video to show what is happening.

  
  Video link:
  Error Photoshop, Illustrator and first - YouTube

  
  Best regards

  L. Roma

  Hello! Guys,

  In another forum I received other steps to disable "Start workspace" and it worked.

  Steps to resolve this problem:

  -Press "ESC" to change the "Workspace" to any other option other than 'Start '.
  -Menu Edit-> preferences-> Geral

  -Uncheck the 'Show 'Start' workspace when no document is open'
  -Press "OK".
  -Close and restart Illustrator

  Kind regards

  L. Roma

• with Photoshop Elements 10 and first Elements 10 installation problem

  I bought a package Photoshop Elements 10 and first Elements 10.  It comes with 5 disks... When I install the first disc, it does not ask for the 2nd drive once the first drive is completed.  When one has been done hit the option of finishing and I did and that's all.  He did not make the next disc.  What should I do?

  Thank you

  Jim

  Hello

  Disc 1 contains the installer for 32-bit Windows.

  Disc 2 contains the installer for Windows 7 64-bit.

  Disc 3 contains the installer for mac OS.

  Disc 4 is the content of the disc for Windows Adobe Premiere Elements.

  Disc 5 is the content of the disc Adobe Premiere Elements for Mac OS.

  You can install from Disc1, 2 or 3 depending on the operating system running on your computer.

  Thank you

• A7S problem with file name and timecode

  Hey there

  We shot some stuff with the A7s and he na no timecode recored even if it has been set to FreeRun. And file names always started with C001 after formatting the card. In the context we where on continuous or simliar. Who is dangerous during download and tip to reconform.

  Can anyone help

  Thank you

  
  

• having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in

  having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in the colors Blue, green and red.

  also when I turn off my laptop just until the display on the top of the screen that is 2 and a half inch thick green line appears and goes about a second.

  help someone?

  Thank you

  Howdy Yaser of zoysia,

  It seems that your screen displays some graphical anomalies when you connect to your user name. I would use these troubleshooting steps in the following article on the resolution of screens:

  Restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  From: get help with graphics issues on external displays connected to your Mac.

  Thank you for using communities of Apple Support.