Timemark with grey field

Similar Questions

• My iPhone freeze with grey screen, then restart only. Subsequently, the Wifi is not available, I have to finish manually restart.

  My iPhone freeze with grey screen, then restart only. Subsequently the Wifi is not available, I have to finish manually restart to be able to use the Wifi. I have restart my internet and network settings, but the problem is still there.

  Hi there Turco911,

  Looks like your screen goes gray and then shuts down its own, and you must manually restart to get the wifi to work again. I save your device in iTunes, then restore it like new and verify that it works.
  
  How to clear your iOS device and then set up as a new device or restore from backups

  If this is the case, restore your backup either check it still works and just reinstalled software or circumvent the problem in the backup file itself.

  If when restored like new the problem persists, I would ask for your phone service:

  Repair - iPhone Apple Support

  Thank you for using communities of Apple Support, all the best!

• How to export the graph xy with indicator field.

  Hello

  I want to export my chart to the .emf format. For this I used call node > image export. If I use this, I can only export the chart not another indicator filed(numeric_and_string_indicatror).how can export chart with flag field?

  This is .vi I used.

  Thanks for your post in our Discussion Forum,

  is it necessary to export the image to the .emf Format?

  If not, I can give you two options:

  The best way to make a screenshot of a certain area of the façade is of

  create a Subvi with all the items you want to take a screenshot of and

  Then take a screenshot of the entire façade of the Subvi.

  It works fine even if the front is not visible, while the photo is taken.

  The screenshot can be taken with a method node as in the example attached to this post.

  Another possibility is to reframe a screenshot of an entire façade to the region you are interested in.

  How this works is described here: http://forums.ni.com/t5/LabVIEW/take-screenshot-of-part-of-front-panel/td-p/1613750

  The downside is that you must manually set the region that could change because of the scrolling or changes on the Panel.

  Best regards

  Peter

• [ADF, JDev12.1.3] SelectOneChoiche created from VO instance with 3 fields: how to retrieve the value of all the fields of the selected element?

  Hallo,

  I defined a VO with 3 fields (A, B and C) and I would like to create a SelectOneChoiche that shows only the field as options from this instance of VO.

  In a managed bean, I need to retrieve the values for all areas (A, B and C) of the item selected by the user.

  I started dragging the entire VO instance to UI to create a SelectOneChoiche (in which I have chosen to show only the to field).

  Then, I created a for the SOC ValueChangeListener read the values A, B and C of the selected element, but the only thing I've done is to get the displayed value:

  System.out.println((String) ((RichSelectOneChoice) FacesUtils.findComponent("MySoc")).getValue());
  

  You kindly help me?

  Thank you

  Federico

  Federico, sorry I didn't see your answer.

  As you use 12.1.3 you can do this more easily than the code that I posted before. You can use

  {} public void onCountrySelection (ValueChangeEvent valueChangeEvent)

  FacesContext will involve = FacesContext.getCurrentInstance ();

  Make sure that the selection change is processed and the current link lov line has the new selected line

  valueChangeEvent.getComponent () .processUpdates (contxt);

  BindingContext lBindingContext = BindingContext.getCurrent ();

  BindingContainer lBindingContainer = lBindingContext.getCurrentBindingsEntry ();

  List JUCtrlListBinding = lBindingContainer.get ("CountryId") (JUCtrlListBinding);

  the newindex in not necessary, but ok let's get it (must be equal to the CountryId, the pharmacokinetics of the binding of the lov

  String newindex = (String) valueChangeEvent.getNewValue ();

  get the selected value in the list that is the selected line of the binding of the lov

  Line lFromList = list.getSelectedValue () (line);

  now, we can get the attributes of the line of lov

  String s = (String) lFromList.getAttribute ("CountryId");

  System.out.println ("CountryId:" + s);

  String s2 = (String) lFromList.getAttribute ("CountryName");

  System.out.println ("CountryName:" + s2);

  BigDecimal s3 = lFromList.getAttribute("RegionId") (BigDecimal);

  System.out.println ("RegionId:" + s3.toString ());

  }

  The form that I use is based on the location of the HR DB schema table. The CountryId is configured in the view object to display a lov based on the campagneVoir. This view contains thre CountryId, CountryName and RegionId attributes.

  If you want to get to the attributes of an action listener you can use this code

  {} public void onGetSelectedCountryLov (ActionEvent actionEvent)

  BindingContext lBindingContext = BindingContext.getCurrent ();

  BindingContainer lBindingContainer = lBindingContext.getCurrentBindingsEntry ();

  List JUCtrlListBinding = lBindingContainer.get ("CountryId") (JUCtrlListBinding);

  get the selected value in the list that is the selected line of the binding of the lov

  Line lFromList = list.getSelectedValue () (line);

  now, we can get the attributes of the line of lov

  String s = (String) lFromList.getAttribute ("CountryId");

  System.out.println ("CountryId:" + s);

  String s2 = (String) lFromList.getAttribute ("CountryName");

  System.out.println ("CountryName:" + s2);

  BigDecimal s3 = lFromList.getAttribute("RegionId") (BigDecimal);

  System.out.println ("RegionId:" + s3.toString ());

  }

  You must add the valueChangeListener and at least add the lines

  FacesContext will involve = FacesContext.getCurrentInstance ();

  Make sure that the selection change is processed and the current link lov line has the new selected line

  valueChangeEvent.getComponent () .processUpdates (contxt);

  to ensure that the selected line is available when you click the button.

  And set autosubmit'= true for the field in the UI that displays the LOV.

  Timo

• I want to send an email manually with the fields email drives custom object? Is this possible?

  I want to send an email manually with the fields email drives custom object? Is this possible?

  Hey,.

  Yes, however, the object record Email custom fields only fill with default values. For the custom field object Record is filled, it must be sent via the event Actions or a generating program so that he knows in which case it is associated.

  Thank you...

• How to query the data of Contact with multiple fields

  How can I query the data of Contact with multiple fields?

  For example, I'll get contacts which are changed after a point at the specified time and whose country is US. How could I make the chain of research of the SOAP API "Query"?

  And I also want to know how to make a search term for RESTful API for contacts above.

  Any suggestions?

  Thank you.

  Hi Biao,

  The following document describes how query for multiple fields using the SOAP API: request a Contact from several fields.

  And you can search multiple fields using the REST API with the & operator. For example, to search for a Contact by e-mail address and date of creation:

  • " emailAddress ='[email protected]' & converted > = '1369828886'".

  Hope this helps and please let us know if you need more information.

  Thank you

  Fred

• Send an E-mail link with merge field

  I am preparing an email that will come "from" beneficiary relationship managers (RM).  In the email will be the Mr e-mail address.  I would like to make the clickable address so that it creates a new email from the platform of e-mail recipients.

  How can I encode the email so that email address is dynamic based on the database information (merger of field)?

  Thank you.

  You might want to try: Officer_Email1"> Officer_Email1

  Technically, we do not use merge field twice. We are inserting a mailt to post a link (with the field even fusion) for the merger of field we have first inserted

  Hope this helps

• Forms of InDesign with rounded fields exported to Acrobat

  Hello. I use CC InDesign and Acrobat Pro DC on a MB Pro. I apologize if this has to be validated in InDesign rather than here.

  I'm working on creating a form with fields that are rounded. I created a rectangle rounded up and copied and pasted a box of field above it in InDesign.

  It is a picky thing, but when the file is exported, the text field is slightly beyond the created rectangle as shown (you can see the edge to the square of the field highlighted). I wanted to just a few tips. Would be the best thing to do in Acrobat is hide the highlighting on the fields? Or is there a workaround? I shouldn't use rounded fields, etc...

  

  There is No such a thing as a table in forms of Acrobat or fields with rounded edges.

  You can disable the highlighting of field via Edition - Preferences - forms.

  As a general rule, I would recommend to create the layout of ID and the fields themselves in Acrobat. I experienced a lot of problems with the fields that have been created in the code.

  Edit: I forgot a key word in the first sentence...

• How can I send a document by e-mail in PDF with editable fields, drop-down boxes and check boxes?

  Our company uses Adobe Reader as well as the version where send you it for signature, convert to word, excel etc.

  What we are trying to do, however, is create the PDF document, save it to our readers of local network for use in a format PDF with editable fields, drop-down boxes to select and check boxes.

  Can you help me please?

  See you soon

  Lucinda

  Hi lucindab50782713,

  Yes, you can save the document as a model using eSign service create a library template | services eSign so that it can be reused.

  Kind regards
  Nicos

• Idea about the creation of the registration with blank fields

  Hi friends,
  I am trying to build a small application where the first page of the application will be the home page. On the homepage, I have register, Login and home buttons. By clicking on the registration link, I want to go to the page where the page with blank fields. How can I view the fields blank when the page is displayed for the first time. I've linked the data control on the page. But when the page appears, it seems, with the data. Also I want to have a cancel button pressed to invalidate or to write off the new record created. How can we achieve this? Any idea.

  Thank you

  User, please tell us your Jdev version!

  A form with fields related to the vo for example shows the data out of the current line. Top get an empty fields, you must create a new line before you navigate to the page to display the form. Your use case can be applied if you call creatInsert inn the vo holding you back data, then go to the screen, allow the user to fill in the data. If the user cancels the cancellation of appeal form to remove the new line, if the user has saved the form validation data in the db.

  Timo

• How to call hr_location_api.create_location to style different address with only fields that belongs to this style of address-specific.

  How to call hr_location_api.create_location to style different address with only fields that belongs to this style of address-specific. It should decide at run time indicates the time he will come to know the type of style of address and on this basis that the fields that belong to the details of the address mapped to hr_location_api.create_location calling.

  Thanks in advance.

  You can create a package wrapper above the API (hr_location_api.create_location)

  In the package wrapper, you set all values dynamically according to your needs (for example the style and add_line columns are filled on your requirements) then, you call the API.

  It doesn't work?

• How to convert merge documents and mailing for the docs individual pdf and each with a field record in the merge?

  How to convert merge documents and mailing for the docs individual pdf and each with a field record in the merge?

  What is an actual field or just a piece of static text somewhere? Whatever it is, you can't do this using the Split Document command. You will need to use a script custom read the value of this 'field' and use it during extraction of pages in the file.

• How to keep the form fields empty with calculated fields

  I am to convert Excel files to Adobe forms with calculated fields.  I use the following if statement to keep the empty fields until the entry is made.

  var v1 = + getField("LengthRisersToday.1").value;

  var v2 = + getField("LengthRisersToDate.0").value;

  If (v1! == 0) {}

  var sum = v1 + v2;

  Event.Value = sum;

  } else {event.value = ";}}

  This does not work if someone from 0 in the field "today."  This is sometimes necessary in this form, as the other fields must be filled and a riser is not always added.

  This form consists of several lines and inscriptions are made there is a running total in column "on this day".

  
  

  
  

  So you say that a result no one is valid and that you want to delete a result of zero only if the LengthRisersToday field is empty? If so, the script can be replaced by:

  var s1 = getField("LengthRisersToday.1").valueAsString;

  var v2 = + getField("LengthRisersToDate.0").value;

  If {(s1)

  var sum = s1 + v2;

  Event.Value = sum;

  } else {}

  Event.Value = "";

  }

• Dynamically, use page number in the form on the pages with their field?

  I have a form with pages having engineered.  JS for spawning exception works very well.  However, a text field on model is driving me crazy.  I wish that this field ("CaseNum") to dynamically display the page number, given that the page number also matches the file number.  On templage ("getcase"), I can calculate the value for CaseNum using custom script calc (event.value = this. PageNum).  But it does not work because each page having spawned Gets the same value (that is to say, what is the latest issue of the page generated). I also tried the JS below, using P0.getcase.CaseNum as the field on the model in which I wish the page number/box number to display:

  var this.pageNum = opaque;

  this.getField ('P' + opaque + ".getcase" + ".") CaseNum') .value = opaque;

  But it does not either, because the page automatically generated field gets the prefix of the P + .getcase page number appended to the name of the field.  Is it possible to number of dynamic page used in a form on the pages with their field?  If so, how? Note that while I try to use a dynamic file on pages with their number, it presents the same problem as dynamically displaying pages with their page numbers.  I'm a JS newbie, so any help appreciated.  I searched high and low on the web and in the forums and couldn't find the answer.  THX.

  http://forums.Adobe.com/thread/1160899

  @

  7George Johnson,.

  

  February 28, 2013 09:42 in reply to natelfo

  Is that what you mean?

  See also:

  http://www.PlanetPDF.com/developer/article.asp?contentid=6466

  d-template-pages-using-JavaScript-functions/ http://www.wordwizardsinc.com/blog/Finding-the-FieldName-prefix-on-Acrobat-acroform-spawne

• get the table script using dbms_metadata.get_ddl but with clob field

  Thus, Oracle 11g R2...
  I use dbms_metadata.get_ddl for table scripts and it works fine...
  
  now, I have a table with clob field, and it does not work... I got an error "missing a closing parenthesis (ora-0907) '...
  I could paste a script I had, but I don't think that it makes no sense...
  
  does anyone have an experience on the use of this package on clob tables?
  
  
  TNX

  See this code.

  DECLARE
    myddl clob;
    PROCEDURE print_clob(p_clob in clob) as
      l_offset number default 1;
    BEGIN
      loop
        exit when l_offset > dbms_lob.getlength(p_clob);
        dbms_output.put_line(dbms_lob.substr(p_clob, 255, l_offset));
        l_offset := l_offset + 255;
      end loop;
    END print_clob;
    FUNCTION get_metadata return clob is
      h   number;
      th  number;
      doc clob;
    BEGIN
      h := dbms_metadata.open('TABLE');
      dbms_metadata.set_filter(h, 'SCHEMA', 'HR');
      dbms_metadata.set_filter(h, 'NAME', 'EMPLOYEES');
      th := dbms_metadata.add_transform(h, 'MODIFY');
      th := dbms_metadata.add_transform(h, 'DDL');
      --dbms_metadata.set_transform_param(th,'SEGMENT_ATTRIBUTES',false);
      doc := dbms_metadata.fetch_clob(h);
      dbms_metadata.CLOSE(h);
      return doc;
    END get_metadata;
  BEGIN
    myddl := get_metadata;
    print_clob(myddl);
  END;
  

  This procedure of print_ddl I took of the documentation.
  Use of the long VALUE. See, in the first example out put is truncated.

  SQL> SELECT dbms_metadata.get_ddl('TABLE','EMP','SCOTT') FROM dual;
  
  DBMS_METADATA.GET_DDL('TABLE','EMP','SCOTT')
  --------------------------------------------------------------------------------
  
    CREATE TABLE "SCOTT"."EMP"
     (    "EMPNO" NUMBER(4,0),
          "ENAME" VARCHAR2(10),
  
  SQL> set long 10000
  SQL> /
  
  DBMS_METADATA.GET_DDL('TABLE','EMP','SCOTT')
  --------------------------------------------------------------------------------
  
    CREATE TABLE "SCOTT"."EMP"
     (    "EMPNO" NUMBER(4,0),
          "ENAME" VARCHAR2(10),
          "JOB" VARCHAR2(9),
          "MGR" NUMBER(4,0),
          "HIREDATE" DATE,
          "SAL" NUMBER(7,2),
          "COMM" NUMBER(7,2),
          "DEPTNO" NUMBER(2,0),
           CONSTRAINT "PK_EMP" PRIMARY KEY ("EMPNO")
  
  DBMS_METADATA.GET_DDL('TABLE','EMP','SCOTT')
  --------------------------------------------------------------------------------
    USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
    STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
    PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
    TABLESPACE "USERS"  ENABLE,
           CONSTRAINT "FK_DEPTNO" FOREIGN KEY ("DEPTNO")
            REFERENCES "SCOTT"."DEPT" ("DEPTNO") ENABLE
     ) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
    STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
    PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
    TABLESPACE "USERS"
  

  SQL> SET LINESIZE 132
  SQL> SET pagesize 0
  SQL> SET LONG 1000000
  SQL> /
  
    CREATE TABLE "SCOTT"."EMP"
     (    "EMPNO" NUMBER(4,0),
          "ENAME" VARCHAR2(10),
          "JOB" VARCHAR2(9),
          "MGR" NUMBER(4,0),
          "HIREDATE" DATE,
          "SAL" NUMBER(7,2),
          "COMM" NUMBER(7,2),
          "DEPTNO" NUMBER(2,0),
           CONSTRAINT "PK_EMP" PRIMARY KEY ("EMPNO")
    USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
    STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
    PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
    TABLESPACE "USERS"  ENABLE,
           CONSTRAINT "FK_DEPTNO" FOREIGN KEY ("DEPTNO")
            REFERENCES "SCOTT"."DEPT" ("DEPTNO") ENABLE
     ) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
    STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
    PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
    TABLESPACE "USERS"
  
  SQL>