Timeout problems

Similar Questions

• com.adobe.livecycle.generatepdf.client.GeneratePdfServiceClient Timeout problem

  We have an obligation to convert large tiff files full text PDF. I use the following code to convert files of small size, but with a large file, I see a timeout problem.

  ALC-CEO-10010-000: com.adobe.livecycle.generatepdf.client.ConversionException: ALC-CEO-010-010-The conversion has expired.

  User must have administrator privileges. Looks like some privileges are missing.

  -Wasil

• Gateway Timeout problem

  With the help of a MacBook Pro 13' (mid-2012) El Capitan (Version 10.11.1). running

  Usually living abroad, came home last night and managed to connect my computer to the internet WiFi and my parents very well. Could access any Web site, ran perfectly. This morning I started having a problem where I can open only a small number of websites (Facebook, Youtube, Google, Apple, Wikipedia), another Web site gives me a ' Gateway Timeout: unable to connect to the remote host " message, even large reputable (NYT, etc.)."

  Here are the facts:

  • MacBook connects to the WiFi
  • MacBook restarted, the problem persisted
  • Reset the router (FRITZ!) 6360 Box cable, German provider is Unitymedia)-online everything has worked again for about 2 minutes, and then the problem comes back
  • All other computers/phones in the House has no problem, can access any Web site
  • Connected my MacBook to the Ether, has worked well. Yet once unplugged and tried WiFi problem returned. Ethernet plugged back in (with WiFi off), now, even the ethernet gives me the same problem
  • Software antiVirus Sophos's active and firewall settings and Web Protection were not yet activated (no idea why)
  • First time this question has occurred (connected to this dozens of times network and worked very well, but with the Mavericks) and has produced at night - everything worked fine yesterday and I am not aware of having made changes to anything.

  Found a thread with a person having a similar problem on another forum of support, but in his case, all its devices had the question so that, in our House, everything works but my MacBook. So I doubt that it is a problem with the provider or router.

  Any help would be greatly appreciated!

  AntiVirus software is Sophos.

  Uninstall completely and evaluate the results.

  Use the Remove Sophos Anti-virus program. It will be installed in the folder Applications on your Mac, unless you have moved or deleted. In this case, follow the instructions in uninstalling here: https://www.sophos.com/support/knowledgebase/122710.aspx. Beware that the effectiveness of the uninstall program is poor, a typical feature of garbage software.

• TCP timeout problems

  Hello

  Request: I'm using LabVIEW 8.2 to connect with a RFID reader.

  I connect to the player via TCP and write (write block TCP) a number of orders (connection, system of game settings, player tags list queries), and my VI works smoothly, with one exception: since I don't know how many tags in advance will be near the read drive ability, I have no method to measure the length of the data back (the block of reading TCP bytes to read).

  To break down the problem, I can either read a very small number of bytes and avoid a time-out error 56, losing some data back in the process, or I can allow the system to timeout, read a large number of bytes and allowing every step of execution take time designated in the time-out period rather than the amount of time it takes indeed for the reader to respond.

  My question, simplified: is there a way I can use the TCP protocol to read only the data that is sent (rather not specify the number of bytes that will be read, which allows the VI to make when no additional data is available)?

  Thank you in advance.

  As far as I know, there is no way to check the amount of data it is in advance. Some protocols have a predefined byte quantity, or send a message by sending the length of the message, for you first read and know how many bytes you need.

  If you can not do that, what you want to do is call reading TCP primitive in a while loop until you get an error in time-out and the warp threads in a tunnel of automatic indexing output. You can then wire the string array resulting 1 d in the string concatenate primitive to convert it to a string. In this way, you can use a short timeout and read a small number of bytes for each reading without loss of information.

• Internet a serious - unable to connect to any site problems, timeout problem

  Hello

  I am facing a problem when I am trying to connect to the internet, the problem is that I am getting timeout error.
  When I see the State it shows me

  Envoy: 193448 received: 123

  The problem is that I can see the bytes sent fom my computer at the rate so high that it is not allowing me to receive whatever it is... It seems to me is perhaps a kind of Virus that blocks the incoming packets and also stifles internet sending of junk (not sure what). I checked the Task Manager and I see 99% the system idle process.

  Help me what shd I do?

  Hi Abhishek,

  ·         Do you use Internet Explorer to browse the web?

  ·         What is the exact message that you receive?

  Method 1: I see you have another thread posted about the infection by the virus. I suggest that you run the scan as suggested and see if it helps.

  Method 2: Run the Fixit tool in the following article to check the issue.

  Internet Explorer error "connection timed out" when server does not

• exercise of the VM session timeout problem

  Hello

  First off all I want to thank all those who contribute on this post, I have a 5.0 vcenter and vmware view running 5 customer, the problem is that on my infrastructure vm´s of users sessions go on the time-out for the most part after 7 or 8 hours of active session is probably for security reasons , I want to turn off this option, but don t know where to find the settings for it on my vcenter, due anyone know how to disable this feature?

  Best regards!

  I am a beginner on vmware view, but I'm trying to help you.

  Most common session is disconnected as a result the VMware View connection Server Session timeout.  This global setting disconnects the sessions after the time-out expires. The default setting is 600 minutes (10 hours).

  To avoid these disconnects, educate users that there is an automatic session expiration time or increase the value of timeout in minutes via the view connection server > view Configuration > global settings and enter the time in the dialog box Session timeout.

  Remember points of certification for responses 'useful' and / or 'correct '.

  -------------

  Bil Bens

• weird http timeout problem

  OK, maybe not weird, but weird. It's WL7sp7.
  
  In the std newspapers in our production environment, we see the following message "the server could not send the HTTP message during the timeout value configured. The socket has been closed. ». You can see this message only to a second interval specific than a minute... that is, in the log below, extract as the second "33" (11: 52:33, 11:55:33, 12:11:33, etc..). After a reboot, we will see only this message to the second "21" (15: 13:21, 3:21:21 PM PST, etc.).
  
  The problem, it is a DOTNET fact http post for this app WL application... If the messages at the wrong time DOTNET application (e.. g, to the second '33' minute) the http post fails. The DOTNET application logs the remote server took of disconnection. If you look at the logs to stdout for the same time, we see the connection timeout message. The post and the response would only last a second or two and little almost always succeeds wait for these applications, which falls on the 'bad' (milli?) second of the minute.
  
  I don't know if I've explained clearly this strange phenomenon. If this is not the case, let me know. An excerpt from our newspapers std:
  
  

  grep /tmp/WLPRODSVR04-stdout.log "the server could not send the HTTP message"

  # < 5 November 2008 11:52:33 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '2' for the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 5 November 2008 11:55:33 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '20' to the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 5 November 2008 12:11:33 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '22' to queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 5 November 2008 12:34:33 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '4' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 5 November 2008 12:42:33 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '2' for the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 5 November 2008 12:53:34 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '23' for the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 5 November 2008 12:57:34 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '26' for the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  ....
  [reboot]
  .....
  # < 5 November 2008 3:13:21 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '30' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 5 November 2008 3:21:21 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '26' for the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 5 November 2008 3:29:21 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '23' for the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 5 November 2008 3:30:21 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '26' for the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 5 November 2008 3:38:21 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '23' for the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 5 November 2008 16:30:21 PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '29' for the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 6 November 2008 16:41:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '27' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 6 November 2008 17:56:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '26' for the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 6 November 2008 18:01:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '26' for the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 6 November 2008 18:08:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: "28" for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 6 November 2008 18:55:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '29' for the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 6 November 2008 19:11:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '22' to queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 6 November 2008 19:50:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '30' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 6 November 2008 8:00:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '24' to queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 6 November 2008 8:07:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '30' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 6 November 2008 8:20:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: "28" for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 6 November 2008 9:15:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '25' to queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 6 November 2008 9:34:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '29' for the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 6 November 2008 9:41:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: that of the "31" to queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 6 November 2008 10:14:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '22' to queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 6 November 2008 10:17:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '21' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 6 November 2008 10:24:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '24' to queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 6 November 2008 10:38:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '30' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 6 November 2008 11:04:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '25' to queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 6 November 2008 11:09:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '21' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 6 November 2008 11:28:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '23' for the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 6 November 2008 11:49:21 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '30' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 6 November 2008 12:20:21 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '29' for the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 6 November 2008 12:47:21 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '20' to the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 6 November 2008 12:56:21 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '22' to queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 6 November 2008 1:10:21 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: that of the "31" to queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 6 November 2008 1:18:21 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '21' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 6 November 2008 3:29:21 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: "28" for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 6 November 2008 16:19:21 PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '30' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 7 November 2008 5:23:17 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '30' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 7 November 2008 17:59:17 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: "28" for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 7 November 2008 18:31:17 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '24' to queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 7 November 2008 6:51:17 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '23' for the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 7 November 2008 19:24:17 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '26' for the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 7 November 2008 19:31:17 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '26' for the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 7 November 2008 19:41:17 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: "28" for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 7 November 2008 8:00:17 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '30' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 7 November 2008 8:21:17 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '24' to queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 7 November 2008 8:47:17 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: that of the "31" to queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 7 November 2008 9:15:17 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '22' to queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 7 November 2008 9:20:17 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '23' for the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 7 November 2008 9:34:17 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '22' to queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 7 November 2008 10:06:17 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: "28" for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 7 November 2008 10:12:17 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '21' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 7 November 2008 10:54:17 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: "28" for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 7 November 2008 11:05:17 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: that of the "31" to queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 7 November 2008 11:12:17 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: that of the "31" to queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 7 November 2008 11:28:17 AM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '27' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  ....
  [reboot]
  .....
  # < 7 November 2008 12:24:09 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: that of the "31" to queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 7 November 2008 12:31:09 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: "14" for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 7 November 2008 12:31:09 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: "14" for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 7 November 2008 12:35:09 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '16' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 7 November 2008 1:14:09 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '17' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 7 November 2008 1:15:09 pm PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '10' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 7 November 2008 1:32:10 PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '19' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 7 November 2008 2:03:10 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '15' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 7 November 2008 2:12:10 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '11' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 7 November 2008 2:12:10 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '11' for queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 7 November 2008 2:24:10 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '24' to queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >
  # < 7 November 2008 3:39:10 PM PST > < Info > < HTTP > < credpwy01swlc04 > < WLPRODSVR04 > < ExecuteThread: '29' for the queue: 'default' > < identity kernel > <>< 101325 > < server could not send the HTTP message during the timeout value configured. The socket has been closed. >

  Its a known problem with WLS 7.0 SP7 (CR300032 and CR196369) associated with CompleteHTTPMessageTimeout. WebLogic Server closes a connection intermittently while responding to the slow clients. If you have a support contract, you can open a service request and download the patch and details of the Czech Republic.

• Toshiba 48L1433DB - USB timeout problems

  My USB Ports do not appear on my list of Source and I have a problem of "dead time".

  If I put a stick in the media page loading USB ports and everything works perfectly, but then turns off after an hour or two (the on-screen message shows empty port lit).

  Then I have to unplug the stick and reload until I can start watching again (have to fast forward to place where disconnect happened but have to stop every now and then to avoid time re-product)

  Very curious

  Posted by [email protected]
  

  My USB Ports do not appear on my list of Source and I have a problem of "dead time".

  If I put a stick in the media page loading USB ports and everything works perfectly, but then turns off after an hour or two (the on-screen message shows empty port lit).

  Then I have to unplug the stick and reload until I can start watching again (have to fast forward to place where disconnect happened but have to stop every now and then to avoid time re-product)

  Very curious

  As a first step, you must make sure, that it is not caused by the type format and/or stick file.
  Have you checked with a stick from another provider? Also, does come with any type of file, or related to some formats?

• single triggered acquisition on scope timeout problems

  Hello everyone

  I'm doing a single acquisition triggered on the scope. I initialize my scope and configure the settings. I then

  Enter a loop to the whole of the trigger and then want to read a waveform of the acquisition. But he does not have a timeout.

  It simply reads the waveform right after that I put the threshold, even if she has not reached the threshold. In my view, that it does not wait for the trigger.

  Is there a way to fix this?

  I use a scope of the 2024B TDS and uses the drivers. I thought I could use the event allow visa and use the trigger as event type for the entry, and then

  Use the wait for SRQ and have a time-out of 25000ms but that didn't work. I get an error saying:

  Specified event type is not supported by the resource.

  I don't know what to do for the timeout. Y at - it other ideas that I could use or am I doing wrong?

  I have attached the vi. I am using LabView 2010.

  Thank you!

  Midna

  Look at the example in the library of Tek

• EA6900 DHCP timeout problem

  This is by far the stronger and more sophisticated wireless router that I have ever used, but it has a small problem in providing wireless services on my phone.  I looked through all the settings and read all the troubleshooting assistance, and I can't find which could control the router sending a momentary power switch pulse exactly all the 60 minutes that is picked up by one of my Apps (AutomateItPro) phone...

  I have had no problem affecting this router upward, mosty plain vanilla right out of the box.  Because I use a cable broadband ISP (Charter) I use DHCP - so I don't get in other internet protocoal settings that control "Connect on Demand", etc..  Nor was I changed the default maximum, length of lease of customer value in the configuration of the router, it's always 1440 minutes (24 hours).

  This app on my phone has the value triggers a notification when I disconnect all WiFi (this router provides my WiFi at home but I have the app to the WiFi network of any) and activate the mobile data and vice versa with a different tone.  With precision every 60 minutes since I have hard reset the router (with an unplugged power cable), I get a notification of your momentary loss of WiFi follwed in 2 seconds by restoring the WiFi.  I tried a hard reset twice and it is a signal on the router, not the app, or my phone.  The problem is that this continues to happen at night when I am sleeping, and this powerful application overrides my silent nights for the phone settings, so I can still hear him.

  What is the setting that does this on the router, and it is possible to prevent him from doing this (emission of the momentary power pulse of the wireless signal)?  I haven't checked if it is a reassignment of IP addresses at this time also...  I really like this router, but being awake is a pain...  (Yes there are other solutions of circumvention of the APP, but those who are not as reliable I found like stop this problem at the source of the router if possible.)

  Thanks from a newbie!

  Hey Ronald,.

  I used to have the same problem.

  The way I fixed it changed the name of one of my networks.

  This router is dual band and has a band of 5 GHz and 2.4 GHz band.

  I had both my SSID network named the same thing with the same password.  For a reason which is that... my connection would constantly.  After changing the name and password of one of the bands I have over this problem.

  Hope that helps Ronald.

  I know it's really annoying.

• Import-TIME timeout problem

  Hi all

  I'm working on a script that creates and configures virtual machines based on a CSV file and a part of that deploys an EGGS to the host. I have deployed several FVO already using my code however last night, the deployment failed with the following error:

  03/11/2015-05:27:44 import-TIME

  A general error occurred: Connection timed out

  My question is: is it possible that I can check for an import failed and try the command again? The disks are in thick eager to zero so I guess that could be a reason for the timeout, but it has never happened before.

  My code is below:

  		# Network configuration $ovfConfig.NetworkMapping.Network_1.Value = (get-VirtualPortGroup-name of the "management of LAN' - VMHost $hostIP)
  		$ovfConfig.NetworkMapping.Network_2.Value = (get-VirtualPortGroup-name 'Operational LAN' - VMHost $hostIP) # Import OVA Import-VAPP-Source $ovfFile - OvfConfiguration $ovfConfig - name $vmName - VMHost $hostIP ' Data store - $datastoreName - DiskStorageFormat-EagerZeroedThick-Force

  Any help is appreciated!

  
  Thank you

  Matt

  I would only use the cmdlet Import-TIME in the setup of Try-Catch.

  And add some logic to a certain number of retries.

  Something like this for example

  # Set the values to use for the deployment

  $ovfConfig.NetworkMapping.Network_1.Value = (get-VirtualPortGroup-name of the "management of LAN' - VMHost $hostIP)

  $ovfConfig.NetworkMapping.Network_2.Value = (get-VirtualPortGroup-name 'Operational LAN' - VMHost $hostIP)

  $maxTries = 3

  $nrTries = 0

  $success = $false

  While ($nrTries - lt $maxTries - and! $success) {}

  # The device construction

  Try {}

  Import-VAPP-Source $ovfFile - OvfConfiguration $ovfConfig - name $vmName - VMHost $hostIP '

  Data store - $datastoreName - DiskStorageFormat EagerZeroedThick-force - confirm: $false '

  Stop - ErrorAction

  $success = $true

  }

  Catch {}

  $nrTries ++

  Write-Host "attempted $nrTries.

  Write-Host "could not deploy a $vmName on the $hostIP host device. Check the errorlog for more details"

  WriteLog "could not deploy $vmName on the $hostIP host device."

  "WriteLog" error message is:

  WriteLog $_. Exception.Message

  WriteLog $_. Exception.ItemName

  }

  }

  {if ($Success)}

  # CPU and RAM for device configuration

  Set-VM $vmName - MemoryGB 4 - NumCPU 2 - confirm: $false

  # Turn on

  Start-VM $vmName | Waiting-Tools

  }

• Customer Oracle TNS connect timeout problems

  Hi all.
  
  I tried to connect the free versions of trial and beta to Benchmark Factory by quest software on my laptop to windows 32-bit on my desk running oracle linux.
  
  With the help of people here, I checked my Oracle database allows incoming connections DB set up server with a routable IP #
  
  The application that I use on my laptop constantly gives me an error ORA-12170: TNS connect timeout...
  
  The following steps have been taken during the installation of the client software...
  
  -------------------------
  1. factory reference download and install
  2 tries to connect to the database on the server machine, but regarldess oracle which has been entered I got a windows error saying not found Oci.dll
  3. I downloaded the zip of Oracle Instant client for 32-bit windows
  4 extract the instant client download files in the bin folder of the reference plant. (this fixes the error not found oci.dll)
  5. When you are using a direct connection, I specified the following details:
  
  Username: linux system user name
  Password: my password of linux
  Host: 192.168.1.9
  Port: 1521
  SID: orcl
  connect as: sysdba
  connect using: Instant customer (it was the only option in a drop down)
  -------------------------------------------
  
  When I try to connect I get the AMT connect timeout error.
  
  Anyone has any ideas what I did wrong or not done?
  
  Any help would be appreciated
  
  Matt
  
  Published by: user9200169 on August 16, 2010 15:53
  
  Published by: user9200169 on August 16, 2010 16:00

  When everything has failed, read the Fine Documentation

  http://www.Oracle.com/technetwork/database/features/OCI/IC-FAQ-094177.html

  "How can I specify the connection in Instant Client mode strings?
  All methods NET naming Oracle does not require the use of ORACLE_HOME or TNS_ADMIN (to locate the configuration such as tnsnames.ora or sqlnet.ora files) work in Instant Client mode. In particular, the connection string can be specified in the following formats:

  A SQL Connect URL string in the form:

  Host: [port] [service name]

  such as:

  dBase-Server - 5:4321 / ORDERS

  As a pair of keyword / value Oracle Net. For example:

  "(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = dlsun242)
  (PORT = 5521))
  (CONNECT_DATA = (SERVICE_NAME = bjava21))) »

  Naming methods that require TNS_ADMIN locate configuration files continue to work if the value of the TNS_ADMIN environment variable.

  If the TNS_ADMIN environment variable is not defined and TNSNAMES entries for example, inst1, are used, the variable ORACLE_HOME must be set, and the configuration files are supposed to be located in the directory of $ORACLE_HOME/network/admin.

  Please note that the ORACLE_HOME variable in this case is only used to locate the Oracle Net configuration files, and any other component of Client Code Library (OCI, NLS and so forth) don't use the value of ORACLE_HOME.

  The adapter unreserved or empty connection strings are not supported. However, another way to use the empty connection string must affect on UNIX TWO_TASK environment variable, or the LOCAL Windows variable, a tnsnames.ora entry or a pair of keyword / value Oracle Net. If LOCAL or TWO_TASK is set to a tnsnames.ora entry, then the tnsnames.ora file must be loaded by setting ORACLE_HOME or TNS_ADMIN.

  "Modified: 8 April 04 Ref #: ID-4428"

• Connection timeout problems

  I have several users using smartview against Essbase, both are V11.1.1.2. They frequently experience connection timeout errors when you try to retrieve reports. WE tried to increase the NetTimeout and the NetDelay on the Essbase server and an increase of agentthreads and a few other parameters configuration of Essbase. SmartView has been configured to allow up to 20000 lines, although these queries return no more than a few hundred lines of data. Session time is set to 60 minutes. This implementation uses Websphere. Can someone suggest setting changes to stop this error from happening? Matt? Mike?

  They can run in a HTTP timeout error.

  You can get all the details of how solve it here - http://support.microsoft.com/kb/813827

• Datasource XA - IllegalStateException timeout problems

  WebLogic 10 using a XA (BEA Oracle Driver (Type 4 XA)) data source I have a long running transaction. When you import data from an excel spreadsheet, I have to perform several select to validate the data, and then enter the number of lines for EACH row in the excel worksheet.
  
  I spend half of the excel lines or better everytime, then get the following error.
  
  
  Message: Exception encountered while marking the transaction rollback status [java.lang.IllegalStateException: can't mark the transaction for rollback xid = BEA1-00125574DC1B83308930, status = Rolled back.] [Reason = weblogic.transaction.internal.TimedOutException: Transaction has expired after 31 seconds]
  BEA1-00125574DC1B83308930]]
  
  I tried to put "Set XA Transaction Timeout" = true and 'XA Transaction Timeout' = 1200 on the console for the data source. This does not change things.
  
  Someone at - he seen this before? The error seems strange to me with the attempt to restore place.

  Hello
  You can also check the setting of JTA on the domain level. Domain-> JTA. Please check the page JTA, including advance setting. Please check the timeout and abandon the time-out properties. What value do you have here?

• Timeout problem has occurred by using striking images via camera Balser Scout IMAQ

  I'm new on this.  The scout Balser worked well with the SDK of pylon. The computer finds the camera via the MAE, but when I clicked the button 'grabbing', poped time-out error place after awhile. Then I turned back to the Viewer, the dead enjoy camera mast.

  Is there something wrong with my implementation?

  Lew,

  Check that the Windows Firewall is disabled. Also, the listed Broadcom interface does not support jumbo frames, so be sure to adjust the packet size used to 1500 bytes.

  Eric